Engineering Release date : Jul 20, 2000
Product Name             : MegaRaid Driver For AMI


Component Name(s) and Version #:
-------------------------------
Components:  For OS/2 Warp ver 3, 4 and e-Business
             ----------------------------------
                     Driver  Version    : v2e.03
                     MegaManager Version :v5.02


Reason for Release :	
--------------------
  
1. The system seemed to hang when loading the OS from SCSI, which has been fixed.	

2. Megamgr: Bug fixed in the path of logical drive viewing scrolling
	   
	    
3. Megamgr: De-Selection of Rebuildable drives on chnl 1 and above had trouble
	    - it was not allowing to be deselected. 
	    Fixed on 7-7-00.

4. Megamgr: If a device id>9 is shown it was leaving '1' in the device field.
            Corrected this on 6-26-00.

5. Megamgr:  It was firing STARTUNIT(0x75) cmd with subop=0(valid values are
	    1 or 2 ). This was resulting in Rebuild-failure constantly.
            Corrected in this on 6-29-00.

6.Megamgr:  On 40ld card,the program was earlier firing PRODUCT_INFO cmd 
	     to get logical Drive status before selection of logical Drives
             for init/checkcon operation. 
	 
	     This was causing wrong decision in 'all drive selection' of 
	     init/chkcon menu and drives were not being selected properly
	     specially on F2 key.
	 
	     It is corrected by use of ENQUIRY3/FULL-SOLICITED cmd during 
	     May 4-17,2000.
	     
7. Megamgr:  #Stripes=xx was being reported as 2-digits for 1..9 stripes 
             fitted logical drive in logical drive properties menu.
             Fixed generically on Feb-08,2000.
         

Enhancements:
-------------

1. Megamgr: Automatic Configuration option is now made working.

2. Megamgr: Checks correct signatures for 438.



Known Restrictions/Bugs
-----------------------

Restrictions:
-------------
1. Six (6) adapters of any type is the maximum.

2. To use this driver on OS/2 e-business, set Emulation to mass storage
   as there is a known bug in the firmware for I2O and OS/2 e-business
   gives problem with I2O setting.

Known Bugs:
-----------
             1. While running megamanager, after the displaying the format menu option,when we exit
		a page fault error occurs, now it has to verified if the problem is due to driver or
		due to the Megamanager.
		

NOTE:
-----
	You can get latest 471/493/475 Firmware images from AMI web Site
http://www.ami.com or contact Tech Support at support@ami.com.

            

File Listing
------------
            File Name       Size        Date      Time
            ---------       ----        ----      ----

             MRAID.ADD     24,274kb   05-08-00    2:55p
             Megaconf.exe 221,926kb   07-14-00    9:01a 
             Readme.txt     2,911kb   07-20-00    4:14p