home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
688os2.zip
/
ES688P
/
ES688IN.HLP
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1996-02-08
|
3KB
|
103 lines
ΓòÉΓòÉΓòÉ 1. Help for Selecting Number of Adapters ΓòÉΓòÉΓòÉ
Use this window to select the number of AudioDrive ES688 Adapters that you have
installed in your system. The maximum number of AudioDrive ES688 Adapters
supported by MMPM/2 is one.
If you select zero, then you will de-install all AudioDrive ES688 Adapters that
have been previously installed by MMPM/2.
However, this feature is currently broken under this version of MINSTALL.EXE.
ΓòÉΓòÉΓòÉ 2. Help for Selecting AudioDrive ES688 Values ΓòÉΓòÉΓòÉ
On this screen, you specify the values that you want to use with your
AudioDrive ES688. The values are described below.
Select Ok to save the selected values and continue.
Since ES688 PnP is Plug and Play, in a system with Plug and Play support the
optimal settings will be used instead of the settings specified in CONFIG.SYS.
I/O Address
This field allows you to select the I/O address for the AudioDrive ES688 you
have installed in your system. Use the drop down box to set the correct I/O
address.
The valid I/O addresses are:
220, 230, 240, and 250
If the device driver fails to initialize (during system reboot following
install), it might be necessary to change the I/O address. To change the I/O
address setting:
Perform a multimedia application installation and select the new I/O
address,
or
Edit the CONFIG.SYS, specify the new I/O address (It is the value
immediately after the /B on ES688PP.SYS line of the CONFIG.SYS), and
reboot.
DMA Channel
This field allows you to select the DMA channel for the AudioDrive ES688 you
have installed in your system. Use the drop down box to set the correct DMA
channel.
The valid DMA channels are:
0, 1, and 3
If the device driver fails to initialize (during system reboot following
install), it might be necessary to change the DMA channel. To change the DMA
channel setting:
Perform a multimedia application installation and select the new DMA
channel,
or
Edit the CONFIG.SYS, specify the new DMA channel (It is the value
immediately after the /D on ES688PP.SYS line of the CONFIG.SYS), and
reboot.
Interrupt Level
This field allows you to select the interrupt level for the AudioDrive ES688
you have installed in your system. Use the drop down box to set the correct
interrupt level.
The valid interrupt levels are:
2, 5, 7, and 10
If the device driver fails to initialize (during system reboot following
install), it might be necessary to change the interrupt level. To change the
interrupt level setting:
Perform a multimedia application installation and select the new
interrupt level,
or
Edit the CONFIG.SYS, specify the new interrupt level (It is the value
immediately after the /I on ES688PP.SYS line of the CONFIG.SYS), and
reboot.
ΓòÉΓòÉΓòÉ 3. Windows Audio Help ΓòÉΓòÉΓòÉ
This installation allows you to install AudioDrive ES688 Windows Audio Support
onto your system.
Use the drop down boxes to set the correct values. The values chosen should be
based on your AudioDrive ES688 hardware settings. See Help for Selecting
AudioDrive ES688 Values for more information.
Select Ok to save the selected values and continue.