home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 3 Comm
/
03-Comm.zip
/
usermd.zip
/
USERMDM.TXT
< prev
Wrap
Text File
|
1995-01-16
|
2KB
|
44 lines
; To add support for a new modem, you can either make changes to existing
; lines at the end of this file, or add a new line. If you add a new line,
; you must increment the number just above the lines. Each line must
; contain the following 8 items, each separated only by the symbol ^.
;
; Modem Name
; Up to 80 characters in length.
;
; Maximum Speed
; The maximum baud rate that your modem can accept commands.
;
; Modem Initialization String
; Commands that will be used to configure the modem before dialing.
;
; Second Modem Initialization String
; Enter a second (or third, etc.) modem initialization string only if
; your modem requires more configuration commands than the modem can
; accept in a single string.
;
; Third Modem Initialization String
; See above.
;
; Fourth Modem Initialization String
; See above.
;
; Connect Message:
; The message your modem displays when it establishes a connection.
;
; Flow control:
; Must be 1 for modems that use hardware flow control (CTS/RTS) or 2 for
; software flow control.
;
; Reserved value:
; Must be zero.
;
; This line and all lines above are comments. The lines below are modem data.
6
Direct Connect (Cabled)^115200^^^^^^2^1
Hayes compatible 1200^1200^ATE1V1Q0S0=0^^^^^2^0
Hayes compatible 2400^2400^ATE1V1Q0S0=0S11=55&C1&D2^^^^^2^0
Hayes compatible high-speed^19200^AT&FE1V1Q0L0&C1&D2&K3S11=55S38=0S95=2^^^^^1^0
User defined high speed^38400^AT&FE1V1Q0X4&C1&D2&K3&R0S11=40S38=0S95=3^^^^CONNECT^^1^0
User defined low speed^2400^ATE1V1Q0S0=0S11=55&C1&D2^^^^CONNECT^^2^0