OS/2 Shareware BBS: 3 Comm/03-Comm.zip/pmcom233.zip/PMCOMM.HLP

OS/2 Help File | 1996-01-02 | 154KB | 5,951 lines

ΓòÉΓòÉΓòÉ 1. Installation Help ΓòÉΓòÉΓòÉ

If you are using OS/2 1.3 you must use Pmcomm 1.11. If you are using OS/2 2.0
without the service pack then you can use either Pmcomm 1.11 or Pmcomm 2.01.
Pmcomm 2.10 and later can only be run on OS/2 2.1 or OS/2 2.0 with the service
pack. To obtain either Pmcomm 1.11 or 2.01 you may download them from our BBS
(541 883-8197).

There are now two ways to install Pmcomm. First Pmcomm comes with an install
program which will install both Pmcomm and the host mode. To use this method
open the drive object for the drive that you are using to install Pmcomm from,
and double click on the install.exe program. This program will copy the files
to the specified directory and create objects on the Desktop for Pmcomm and
various other programs.

The second method that can be used to install Pmcomm is to copy all of the
files on the distribution disk to a directory on your hard disk. Also, copy
RxPmcomm.dll and RxPmc32.dll into a .dll directory (i.e. C:\os2\dll). The
RxPmc32.dll can only be used with OS/2 2.0 or later.

Note:  You must use the install program in order to install Pmcomm's Host Mode.
If you are upgrading from a previous version of Pmcomm, you must us the install
program to convert the dialing directories to the new format.

Pmcomm can be run from a command line by typing pmcomm, but it is recommended
that it be installed in a "Group" under OS/2 1.3 or as an object under OS/2 2.0
or 2.1. If you used the install program the object will automatically be
created.

To install Pmcomm in a group under OS/2 1.3, access the Program menu on the
"Group" menu and chose the New option. This will bring up a dialog box where
the following information must be entered.

Program title: Pmcomm

Path and filename: user_specified_path\pmcomm.exe

Parameters: setup.dat

Working directory: user_specified_path

Program type: Presentation Manager

The final step is to select the Add option at the bottom of the dialog box.

Note:  setup.dat will be created if not in existence.

To install Pmcomm as an object under OS/2 2.0 or 2.1, open the OS/2 System
object on the desktop and access the Template folder. Now, drag the Program
Object onto the desktop. When the settings dialog box comes up type the path to
Pmcomm and the filename Pmcomm.exe in the edit field reserved for that purpose.
Close the settings box and Pmcomm is on

There is a program called timer.exe that is included with Pmcomm that will
allow you to execute Pmcomm at specified times. This will allow you to set up a
script to have Pmcomm dial numbers at certain times and capture mail, download
files, etc.


ΓòÉΓòÉΓòÉ 2. Command line options ΓòÉΓòÉΓòÉ

Pmcomm allows you to pass either the name of a setup file, or the name of a
script, on the command line. If the name of the file you pass has the extension
.dat, then the file will be treated as a setup file. If the .dat file does not
exist then Pmcomm will create it. If the file you pass has the extension .cmd
then it will be treated as a REXX script and executed on startup of Pmcomm.
Similarily, a file with the extension of .exe will be treated as an external
executable file. All other valid extensions, including the lack of an
extension, will be treated as an internal script.


ΓòÉΓòÉΓòÉ 3. Extended Help ΓòÉΓòÉΓòÉ

There is a collection of utilities in the File section such as; Scripts,
Capture, Log File, File Import, Extended Scroll Buffer, Print, and Stop Wave.

In the Edit section there are commands such as Copy, Append, Paste, and
Clear_Screen. These commands will help you manipulate on-screen information.

The Connect command allows you to connect to another computer, either through a
modem, using the Dial command or direct connect, using the Send_Break command.
The Initialize Modem command will send the modem initialization string to the
modem. This command allows the user to re-initialize the modem without exiting
and rerunning Pmcomm.

Transfer allows the use of different protocols to send and receive files to or
from a remote computer. The protocol options are Xmodem_Checksum, Xmodem_CRC,
1K-Xmodem, Ymodem(batch), Ymodem-g(batch), Zmodem, Kermit, CISB, ASCII, and
IND$FILE (for downloads). Zmodem is probably the best selection when available
on the remote computer. Ymodem-G should only be used with error correcting
modems.

FTP allows files to be sent and received via TCP/IP and the FTP protocol.

Hang-up sends the hang-up command string (see the Option menu) and optionally
drops the DTR line to the modem. Dropping DTR is the most effective if your
modem is setup to hang-up when DTR is dropped. Using a hang-up string is also
slower, because Pmcomm has to get the modem into the command state before
sending the hang-up string. If you have DTR on and delete the hangup string the
hang-up will be much faster.

Option allows you to tailor Pmcomm to your own tastes. The areas in option are
Port, Dial_Setup, Modem, Protocols, Paths, Prompts, Macros_Setup, KeyMap,
Popup_Menu, Screen, Status_Line, Terminal, Multimedia, and Chat. The setup is
not automatically saved. This allows you to change things temporally without
changing your default setup file. If you do want to make the  changes permanent
be sure to save the setup file. To save the current setup file, use the
Save_setup command under the File menu option.

Macros allows you to pick, with a mouse, the macro you wish to send. Macros can
also be selected with an Alt+corresponding number keystroke. Pmcomm allows you
to set up ten different macros. Scripts can be executed from macros by using
the shell command. An example of this would be:

shell("c:\pmcomm\plane.cmd");

This would execute the REXX script called plane.cmd. This allows you a quick
and easy way to execute often used scripts.

Multimedia files can be played from a macro as well, with the play_wave
command. The play_wave command will play any file that is supported by OS/2.
This includes wav, mid, and avi file formats. The syntax for this command is :

play_wave("c:\mmos2\sounds\bach.mid");

The key mapping ability of Pmcomm allows a user to re-map the keyboard to meet
the requirements of the host computer. It also allows the user to map the keys,
so that often executed functions can be programmed to a certain key. This is
commonly called a "Hot Key".


ΓòÉΓòÉΓòÉ 3.1. Keys Help ΓòÉΓòÉΓòÉ

The following is a list of default "Hot keys" available. These keys can be
re-mapped to other functions, and the use of these keys may vary with the
terminal emulation used.

 F1      =   Help.

 F3      =   Exit.

 Alt-D     =   Dialing directory.

 Alt-H     =   Hangup.

 Alt-Q     =   Dial Queue entries.

 Alt-X     =   Exit.

 Ctrl-Break  =   Send break.

 Ctrl-Insert  =   Copy.

 Alt-Insert  =   Append.

 Shift-Insert  =  Paste.

 Page-Dn   =   Download.

 Page-Up   =   Upload.

 Print Scrn  =   Prints text in the visible
          window (full line length).

The up and down arrow keys default to scrolling the window. You can change this
in the setup terminal dialog box so that when in ANSI mode the arrow keys will
be sent to the modem.

In VT100 mode, some keys have been changed to try to closely emulate the VT100
keyboard. F1-F4 are now the PF keys. Because of this the F1 key will not
display the normal help, and F3 will not exit the program. The PF keys will
send the following characters:

  F1 = ESCOP

  F2 = ESCOQ

  F3 = ESCOR

  F4 = ESCOS

Where ESC is equal to the ASCII character hex 1B. All other default hot keys
will not be available, unless they have been re-mapped.

In VT220 mode additional keys have been redefined. While in this mode Pmcomm is
not CUA compliant, because of the need to use some of the hot keys that OS/2
would normally use. In VT220 mode the F1-F4 keys will send the same characters
as in VT100. In addition VT220 will also use other functions keys as follows:

  F5  = BREAK (sends a break signal)

  F6  = CSI17~

  F7  = CSI18~

  F8  = CSI19~

  F9  = CSI20~

  F10 = CSI21~

  F11 = CSI23~

  F12 = CSI24~

  Alt/F1  = CSI23~  (VT220 F11 function key)

  Alt/F2  = CSI24~  (VT220 F12 function key)

  Alt/F3  = CSI25~  (VT220 F13 function key)

  Alt/F4  = CSI26~  (VT220 F14 function key)

  Alt/F5  = CSI28~  (VT220 F15 function key)

  Alt/F6  = CSI29~  (VT220 F16 function key)

  Alt/F7  = CSI31~  (VT220 F17 function key)

  Alt/F8  = CSI32~  (VT220 F18 function key)

  Alt/F9  = CSI33~  (VT220 F19 function key)

  Alt/F10 = CSI34~  (VT220 F20 function key)
CSI will be one of two values, either the CSI character or the ANSI ESC[. If
you are connected with 8 data bits and the host supports the 8 bit sequence
then the CSI character will be used. When the num lock key is off the numerical
key pad will be in the application mode. If you are connecting to a VT220 Host
you can use these keys to send the VT220 PF key values. For example pressing
the 1 on the numeric key pad will send the VT220 PF1 key. Pressing the 3 on the
numeric key pad will send the VT220 PF3 key, and so on. With the num lock on
the numbers will be sent. The plus key has been re-mapped to be a comma, again
to be compatible with the VT100 keyboard.


ΓòÉΓòÉΓòÉ 3.2. Button Bar Help ΓòÉΓòÉΓòÉ

The Button Bar allows, with the click of a mouse button, the user to execute
various utilities and any user defined macros. The name of the macro will
appear on the button.

Phone Button

There are many options that can be accessed by the Phone Button. If the
telephone is on-hook (hung up) and you click on the button, Pmcomm will dial
any numbers that you have selected in the dialing directory. If there aren't
any numbers selected, Pmcomm will "pop" up the dialing directory.

If you select a dialing directory in File Manager and hold down the right mouse
button you can drag the dialing directory to the phone button. Once the mouse
button is released over the phone button, Pmcomm will dial any selected
numbers. If there aren't any numbers selected, Pmcomm will "pop" up the dialing
directory.

Once online the phone button will be taken off-hook. If the phone is off-hook
and you click on the button, Pmcomm will hang-up. If Monitor DCD is turned off
and you click on the button, Pmcomm will dial any selected numbers in the
dialing directory. If there aren't any numbers selected, Pmcomm will "pop" up
the dialing directory.

Disk Button

The Disk Button allows a quick and easy way to turn the Capture option on and
off. If only the disk appears on the button and you click on the button Pmcomm
will then prompt you for the filename of the capture file. If the disk appears
to have arrows pointing it, Pmcomm is already executing the Capture command. If
you click on the button when it is in this form, Pmcomm will cancel the Capture
command.

Log Buttom

By clicking on the Log Button, Pmcomm will turn logging on. When logging is on,
the log will appear with logging equipment (crosscut saw and an axe), if you
click on this button Pmcomm will turning logging off.

Printer Button

By clicking on the Printer Button you can print any selected text. If there
isn't any selected text, Pmcomm will execute the Print Continuous command.
Clicking on the button again will turn the Print Continuous command off.

Generator Button

Clicking on the Generator Button will turn on the Script Generator. Pmcomm will
then prompt you for a filename for the script. If you click on the button
again, Pmcomm will turn off the Script Generator. The Generator Button will
have yellow arrows pointing away from the generator when a script is being
generated.

Book Button

Clicking on the Book Button will execute a script. If Pmcomm is executing a
script, clicking on the button will cancel the script. You can also use the
drag and drop feature of Pmcomm to select any executable file (extensions .exe,
.cmd and .scr) from the File Manager and executing that file by dragging and
dropping the file on the Book Button.

Port Button

Clicking on the Port Button will access the Port Setup dialog box. This allows
the user to make any changes to the port setup as needed.

Scroll Button

Clicking on the Scroll Button accesses Pmcomm's Extended Scroll Buffer.


ΓòÉΓòÉΓòÉ 4. File ΓòÉΓòÉΓòÉ

There is a collection of utilities in this section such as; Save_setup,
Scripts, Capture, Log File, File Import, Extended Scroll Buffer, Print, and
Stop Wave.


ΓòÉΓòÉΓòÉ 4.1. Save Setup ΓòÉΓòÉΓòÉ

Saves user definable configurations as well as screen size and position. The
default file name that is used for the setup file is setup.dat. Different setup
file names can be used by specifying a different file name as a parameter when
starting Pmcomm. You can use any name as long as it has an extension of dat.


ΓòÉΓòÉΓòÉ 4.2. Capture ΓòÉΓòÉΓòÉ

Capture saves everything that is received from the modem to a file. For
example, you can capture all new messages and then read them after you hang up.
If you specify PRN as the filename everything will be captured to the printer.
If you have Monitor_DCD selected then the capture file will be closed when you
log off. This will happen if you started the capture file from the menu or from
a internal script.


ΓòÉΓòÉΓòÉ 4.2.1. Start Capture ΓòÉΓòÉΓòÉ

When selecting this option you will be prompted for a file name and then
everything that comes in from the modem will be saved to that file. If PRN is
selected then everything will be sent to the printer. If the file exists you
will be asked if you wish to overwrite the file. If you select no, the new
information will be appended to the end of the file. Select cancel if you wish
to abort the capture.

You may also start the capture by clicking on the disk button located on the
Button_Bar.


ΓòÉΓòÉΓòÉ 4.2.2. Cancel Capture ΓòÉΓòÉΓòÉ

This command will turn off capture. This command will only work if capture was
started with the Start_Capture command.

You may also cancel the capture command by clicking on the disk button located
on the Button_Bar.


ΓòÉΓòÉΓòÉ 4.3. Scripts ΓòÉΓòÉΓòÉ

Scripts allow you to have the computer perform certain tasks automatically. The
internal commands available are:

wait_for
puts
sleep
call
capture_on
capture_off
change_option
dial
shell
exit

The REXX commands that are available are:

init_dll
init_32dll
setcom
sendb
dcd
char_avail
read_timeout
Get_ch
ring_detect
drop_dtr
raise_dtr
Wait_for
Wait_fore
Put_s
Sleep
beep
get_cursor_position
get_char_at
capture_on
capture_off
change_option
dial
get_dial_memo
clipboard_paste
clipboard_copy
clipboard_append
xmodem_send
xmodem_receive
xmodem_chk_send
xmodem_chk_receive
xmodem_1k_send
xmodem_1k_receive
ymodem_send
ymodem_receive
ymodemg_send
ymodemg_receive
zmodem_send
zmodem_receive
kermit_send
kermit_receive
ascii_send
ascii_receive
cisb_send
cisb_receive
set_download_path
os2_shell

The 'C' library commands that are available are:

init_lib
setcom
sendb
dcd
char_avail
read_timeout
get_ch
ring_detect
drop_dtr
raise_dtr
wait_for
wait_fore
put_s
sleep
beep
get_cursor_position
get_char_at
capture_on
capture_off
change_option
dial
get_dial_memo
clipboard_paste
clipboard_copy
clipboard_append
xmodem_send
xmodem_receive
xmodem_chk_send
xmodem_chk_receive
xmodem_1k_send
xmodem_1k_receive
ymodem_send
ymodem_receive
ymodemg_send
ymodemg_receive
zmodem_send
zmodem_receive
kermit_send
kermit_receive
ascii_send
ascii_receive
cisb_send
cisb_receive
set_download_path
os2_shell

The scripts command is only available in the commercial version of Pmcomm.


ΓòÉΓòÉΓòÉ 4.3.1. Start Scripts ΓòÉΓòÉΓòÉ

With this command you can start a pre-written script at any time, just enter
the file name of the script when prompted. If only the file name is entered,
the script path will be searched for the file. Full path and file names are
allowed.

You may also start a script be clicking on the book button located on the
Button_Bar.


ΓòÉΓòÉΓòÉ 4.3.2. Script Dialog ΓòÉΓòÉΓòÉ

The Script Dialog displays information and options about the current script.
When the dialog is displayed you have the option of either aborting the script,
closing the dialog box, or skipping the currently executing command.


ΓòÉΓòÉΓòÉ 4.3.3. Cancel Script ΓòÉΓòÉΓòÉ

This command is used to stop a script that is already running. The script will
be canceled at the time this is selected unless the script is at a sleep
command. In this case the script will stop after the sleep time interval has
expired.

You may also cancel a script by clicking on the book button located on the
Button_Bar.


ΓòÉΓòÉΓòÉ 4.3.4. Start Script Generator ΓòÉΓòÉΓòÉ

This is the command that executes Pmcomm's script generator. The script
generator will write a script in either REXX or Internal script syntax. A REXX
script must have a cmd extension, and an Internal script must have a scr
extension. If you want a script that will log you on to a BBS turn the script
generator on and log on normally. Once finished logging on cancel the script
generator. You now have a script that will log you onto that BBS. If you start
the script generator before you dial the remote system a dial command will be
in the script. With this script you can just start the script and the script
will dial the number. If you start the script generator after connected to the
remote system, the script that will be created is designed to be entered into
the dialing directory. In some cases you may have to start the script generator
before you dial and then delete the dial command from the script. Some remote
systems send information as soon as you connect, this does not allow the user
enough time to start the script generator.

You may also start the script generator by clicking on the generator button
located on the Button_Bar.


ΓòÉΓòÉΓòÉ <hidden> Filename ΓòÉΓòÉΓòÉ

Pmcomm allows you to choose either a path and filename or just the filename. If
only the filename is entered, Pmcomm will use the script directory that is
setup under the Paths option. Be sure that all REXX scripts have an extension
of .cmd and all Internal scripts have an extension of .scr. If these extensions
are not used Pmcomm will create the script but the script will not be able to
be executed.


ΓòÉΓòÉΓòÉ <hidden> Description ΓòÉΓòÉΓòÉ

This description will appear as the first line of the script. The description
will hopefully avoid any confusion about the purpose of the script at later
date.


ΓòÉΓòÉΓòÉ <hidden> REXX Script ΓòÉΓòÉΓòÉ

This will create a script using the REXX language. The filename must have an
extension of .cmd in order for it to be executed by the REXX interpreter. A
REXX script will execute a little slower than an Internal script, but it is
more flexible.


ΓòÉΓòÉΓòÉ <hidden> Internal Script ΓòÉΓòÉΓòÉ

This will create a script using Pmcomm's Internal script syntax. The filename
must have an .scr extension in order for it to be executed by Pmcomm.


ΓòÉΓòÉΓòÉ <hidden> Number of Characters in wait_fore ΓòÉΓòÉΓòÉ

The Number of Characters in wait_fore will decide the length of the wait_fore
statements. The default is 10 characters which for most purposes will be
adequate.


ΓòÉΓòÉΓòÉ 4.3.5. Cancel Script Generator ΓòÉΓòÉΓòÉ

This command turns off the script generator. You can also cancel the script
generator by clicking on the generator button located on the Button_Bar.


ΓòÉΓòÉΓòÉ 4.4. Log File ΓòÉΓòÉΓòÉ

Logging writes to a file named pmcomm.log in the main pmcomm directory. The
type of information written is the time, date and name of the number called.
The time, date, cps and name of files transferred will also be saved. If you
are setup to monitor DCD the time and date of when the call was terminated will
also be recorded.


ΓòÉΓòÉΓòÉ 4.4.1. Start Logging ΓòÉΓòÉΓòÉ

The file named pmcomm.log in the main pmcomm directory will be opened. Any
logging information will be appended to the end of the file.

You may also start logging by clicking on the log button located on the
Button_Bar.


ΓòÉΓòÉΓòÉ 4.4.2. Cancel Logging ΓòÉΓòÉΓòÉ

The log file will be closed and no other information will be written to the log
file until it is reopened using the Start Log option.

You may also cancel logging by clicking on the log button located on the
Button_Bar.


ΓòÉΓòÉΓòÉ 4.5. File Import ΓòÉΓòÉΓòÉ

This command copies a file from disk and sends it to a remotely connected
computer. This can be handy for sending previously saved files as messages, or
during a chat session. At times this is handier then using the clipboard. The
delay time specified in the file import delay parameter under Options,
Protocols, will pause the specified number of seconds after each line has been
sent. This can be useful if the receiver can not process the information as
fast as Pmcomm can send it.


ΓòÉΓòÉΓòÉ 4.6. Extended Scroll Buffer ΓòÉΓòÉΓòÉ

The extended scroll buffer allows a user to store information in memory, that
can later be displayed. As information comes in from the com port Pmcomm will
store it in both the regular scroll buffer (accessed by using the scroll bars),
and into the extended scroll buffer (accessed by using this command). The size
of the extended buffer can be set under Options, Screen. The extended scroll
buffer size will be rounded down to the nearest 4K (4096 bytes) in size. This
is to make the memory usage more efficient in OS/2. The user has the ability to
read and write to the extended scroll buffer. A user can copy information from
the extended scroll buffer into the OS/2 clipboard. Once in the OS/2 clipboard
the information can be pasted into word processors, spread sheets, etc.. A user
can also import a text file into the extended scroll buffer and then send the
file to the modem.


ΓòÉΓòÉΓòÉ 4.6.1. File ΓòÉΓòÉΓòÉ

There is a collection of functions under this menu option that allows a user to
transport the text in various ways. The functions are:

Import text file

Save as

Print selected

Print all

Exit buffer


ΓòÉΓòÉΓòÉ 4.6.2. Import Text File ΓòÉΓòÉΓòÉ

This function allows the user to import a text file into the extended scroll
buffer.


ΓòÉΓòÉΓòÉ 4.6.3. Save as ΓòÉΓòÉΓòÉ

This function allows the user to save the text in the extended scroll buffer to
a file.


ΓòÉΓòÉΓòÉ 4.6.4. Print selected ΓòÉΓòÉΓòÉ

If any text in the buffer has been highlighted with the mouse, selecting this
function will send the selected text to the printer.


ΓòÉΓòÉΓòÉ 4.6.5. Print all ΓòÉΓòÉΓòÉ

This function will send all of the text, in the buffer, to the printer.


ΓòÉΓòÉΓòÉ 4.6.6. Exit buffer ΓòÉΓòÉΓòÉ

This will exit the extended scroll buffer and return you to the main screen of
Pmcomm.


ΓòÉΓòÉΓòÉ 4.6.7. Edit ΓòÉΓòÉΓòÉ

There are a collection of functions under this menu option that allow a user to
manipulate text in the extended scroll buffer. The functions are:

Search

Find next

Copy

Paste

Cut

Clear selected

Clear all

Undo


ΓòÉΓòÉΓòÉ 4.6.8. Search ΓòÉΓòÉΓòÉ

This function allows the user to search for any character sequence that may be
in the extended scroll buffer. The search always starts at the top of the
extended scroll buffer.


ΓòÉΓòÉΓòÉ 4.6.9. Find next ΓòÉΓòÉΓòÉ

This function allows the user to find the next occurrence of the selected
character sequence.


ΓòÉΓòÉΓòÉ 4.6.10. Copy ΓòÉΓòÉΓòÉ

This function copies any selected text into the clipboard. The text can then be
pasted into other applications as well as the main terminal screen of Pmcomm.


ΓòÉΓòÉΓòÉ 4.6.11. Paste ΓòÉΓòÉΓòÉ

This inserts any text that is in the clipboard into the extended scroll buffer.


ΓòÉΓòÉΓòÉ 4.6.12. Cut ΓòÉΓòÉΓòÉ

This command deletes the selected text from the extended scroll buffer but
saves a copy of the text in the clipboard so it can be pasted at another
location.


ΓòÉΓòÉΓòÉ 4.6.13. Clear selected ΓòÉΓòÉΓòÉ

This command deletes all selected text from the extended scroll buffer.


ΓòÉΓòÉΓòÉ 4.6.14. Clear all ΓòÉΓòÉΓòÉ

This command clears the entire extended scroll buffer of any text.


ΓòÉΓòÉΓòÉ 4.6.15. Undo ΓòÉΓòÉΓòÉ

This command will undo the last editing command.


ΓòÉΓòÉΓòÉ 4.6.16. Options ΓòÉΓòÉΓòÉ

There are two functions under this menu option that allows a user to manipulate
the screen appearance. The functions are:

Font

Color


ΓòÉΓòÉΓòÉ 4.6.17. Font ΓòÉΓòÉΓòÉ

This command allows the user to change the font characteristics in the extended
scroll buffer. All of the fonts available for OS/2 2.0 are recognized by
Pmcomm.


ΓòÉΓòÉΓòÉ 4.6.18. Color ΓòÉΓòÉΓòÉ

This command allows the user to set both the foreground and background colors
in extended scroll buffer.


ΓòÉΓòÉΓòÉ 4.7. Print ΓòÉΓòÉΓòÉ

Print allows you to send information that was previously received out to the
printer. You can either send the information that is displayed on the visible
part of the window, or you can print the whole scroll back buffer. The print
function uses PRN as the device name for printing.


ΓòÉΓòÉΓòÉ 4.7.1. Print visible screen ΓòÉΓòÉΓòÉ

This command can also be sent by pressing the Print Screen key. When Pmcomm
receives this message it prints all of the lines on the visible part of the
screen.


ΓòÉΓòÉΓòÉ 4.7.2. Print buffer ΓòÉΓòÉΓòÉ

When this is selected all of the scroll back buffer is sent out to the printer.
There are about 240 lines available in the scroll back buffer, so this command
may take awhile to complete. This does not mean that you can't do anything
else. Pmcomm will print in the background while you go on.


ΓòÉΓòÉΓòÉ 4.7.3. Print selected ΓòÉΓòÉΓòÉ

This will print previously selected text (by using the mouse) to the PRN
device.

You may also print any selected text by clicking on the printer button located
on the Button_Bar.


ΓòÉΓòÉΓòÉ 4.7.4. Print continuous ΓòÉΓòÉΓòÉ

This will print everything that comes in from the communication port to the PRN
device.


ΓòÉΓòÉΓòÉ 4.7.5. Start continuous printing ΓòÉΓòÉΓòÉ

This will start continuous printing. Everything will be printed to the PRN
device. It is not recommended that you use this command unless you have the
OS/2 print spooler active.

You may also start continuous printing by clicking on the printer button
located on the Button_Bar.


ΓòÉΓòÉΓòÉ 4.7.6. Cancel continuous printing ΓòÉΓòÉΓòÉ

This will cancel printing, that was started with the Start continuous printing
command.

You may also cancel continuous printing by clicking on the printer button
located on the Button_Bar.


ΓòÉΓòÉΓòÉ 4.8. Product Information ΓòÉΓòÉΓòÉ

The product information box has information about this program, such as BBS
support telephone number, company name, version number, serial number, and
copyright information.


ΓòÉΓòÉΓòÉ 4.9. Stop Wave ΓòÉΓòÉΓòÉ

Stop Wave allows you to stop the playing of a Multimedia sound file, that was
started playing from within Pmcomm. This can be a file that was played when an
event occured (such as a BUSY signal), or from a Macro. Even though the command
is called Stop Wave, this command will stop any Multimedia file that is Played,
even video.


ΓòÉΓòÉΓòÉ 4.10. Exit ΓòÉΓòÉΓòÉ

Ends current session with Pmcomm. Before exiting Pmcomm will restore the state
of the com port. Pmcomm closes the communication port when exiting which drops
DTR. The hang-up string is also sent to the modem, after the main Pmcomm window
disappears. Because of this if Pmcomm is immediately rerun the com port may not
be able to be reopened until the previous execution of Pmcomm completes. If you
get a device open error when doing this, just wait a few seconds and try again.


ΓòÉΓòÉΓòÉ 5. Edit ΓòÉΓòÉΓòÉ

In this section there are commands such as Copy, Append, Paste, and
Clear_Screen.


ΓòÉΓòÉΓòÉ 5.1. Copy ΓòÉΓòÉΓòÉ

Copy transfers selected information from the screen and places it into the
Clipboard. Any information already in the Clipboard, will be deleted. Other
applications, such as a word processor, can then use this information.


ΓòÉΓòÉΓòÉ 5.2. Append ΓòÉΓòÉΓòÉ

Append adds selected text to information that is already in the Clipboard. If
there is existing information of the same type (CF_TEXT), then the selected
text will be added to the end of the existing information. One use of this
would be to save file names into the Clipboard, so they maybe used to download.


ΓòÉΓòÉΓòÉ 5.3. Paste ΓòÉΓòÉΓòÉ

Paste, copies information from the clipboard and sends it out to the modem.
Care must be taken that the information sent can be handled by the remote
computer. A use for this command would be that you could enter a message in a
word processor, copy that message into the clipboard and then paste it into
Pmcomm.


ΓòÉΓòÉΓòÉ 5.4. Clear Screen ΓòÉΓòÉΓòÉ

Clears the whole screen including the scroll back buffer and resets the
attribute to the attribute defined in the setup area.


ΓòÉΓòÉΓòÉ 6. Connect ΓòÉΓòÉΓòÉ

This command allows you to connect to another computer, either through a modem,
using the Dial command or direct connect, using the Send_Break command.


ΓòÉΓòÉΓòÉ 6.1. Dial ΓòÉΓòÉΓòÉ

Dial uses a dialing_directory to store phone numbers and other information
about the remote computer. This provides a easy way to connect to remote
computers.


ΓòÉΓòÉΓòÉ 6.1.1. Dial Dialog Help ΓòÉΓòÉΓòÉ

The dial dialog box allows you to add, select, modify, or delete entries in the
current dialing directory. An entry can also be selected to be automatically
selected (or optionally dialed) when Pmcomm is first started.

To add an entry, select the add button in the dialog box. You will then be
prompted to enter the name of the new entry. The directory will be sorted and
the new entry will be selected. The cursor will be positioned at the number
entry field so that the number for the new entry can be entered. After the
number has been entered, pressing the enter key will save the dialing directory
and dial the number(s). Pressing the tab key will allow you to edit the other
fields.

To select a number, using a mouse, "click" on the number (or numbers) that you
wish to dial. To deselect an entry "click" on the number once again. If you are
not using a mouse the arrow keys will move the highlight bar through the
directory. To select your choices press the space bar, a second time will
deselect the entry, then press enter. Multiple entries may be selected. This
will form a dialing queue, in which Pmcomm will dial the selected entries until
a connection is made.

To modify an entry, select the entry to be edited and then use the tab key to
move the cursor to the field you wish to change. Use the Change button to
change the name of an entry. Pressing the save button will save the
modifications to the disk.

To change a name, select the entry to be edited and then use press the change
button. The change will automatically be saved to the disk.

To delete an entry, select the entry to be deleted and select the delete button
in the dialog box.

Information for each number such as last time called, number of times called,
file cps on downloading, file cps on uploading, files downloaded, files
uploaded and protocol, can be accessed by selecting an entry and then clicking
on the Info button.

CAUTION:
If multiple entries are selected, only the first selected entry will be
deleted.

The dial dialog box can also be accessed by clicking on the phone button on the
Button_Bar.


ΓòÉΓòÉΓòÉ 6.1.2. Dial Prefix ΓòÉΓòÉΓòÉ

Pmcomm sends the selected dial prefix to the modem before sending the phone
number. The default string for the prefixes is ATDT which tells the modem to
dial using tone (ie. touch tone). If your phone system does not support touch
tone then you could use the ATDP command. Pmcomm allows you to setup multiple
prefixes, so that if you need to dial a special code for long distance calls
you can set up a separate prefix for those calls.


ΓòÉΓòÉΓòÉ 6.1.3. Dial Suffix ΓòÉΓòÉΓòÉ

Pmcomm sends the selected dial suffix to the modem after sending the phone
number. The default string for the suffixes is ^M which is a carriage return
and line feed.


ΓòÉΓòÉΓòÉ 6.1.4. Automatically Selected ΓòÉΓòÉΓòÉ

If a dialing entry is marked as being automatically selected then each time
Pmcomm is started this entry will be selected to be dialed. You can have as
many entries automatically selected as you want, and this will form a dialing
queue. A dialing queue allows you to try the first number and if it is busy it
will then dial the next number in the queue. If the Dial Auto Selected Entries
on program Startup is selected then any entries in the dialing directory that
are marked as auto selected, will automatically be dialed. This option will
allow you to automatically dial selected numbers when Pmcomm is first invoked.


ΓòÉΓòÉΓòÉ 6.1.5. Dial List Box ΓòÉΓòÉΓòÉ

The Dial List Box is a multiple selection list box. This means that you can
select more than one entry at a time. The information on the right side of the
Dialog Box is on the first item selected. The reason for using a multiple
selection list box, is that you can select more than one item and these items
will be dialed in order. For example, if the first number selected is busy then
Pmcomm will dial the next number selected. If all selected numbers are busy,
Pmcomm will start over again. If you have multiple items selected and select
the Delete button, only the first item will be deleted. If an item is selected
and you double click on that item then the selected items will be dialed.


ΓòÉΓòÉΓòÉ 6.1.6. Dial Device ΓòÉΓòÉΓòÉ

A device name can be entered here (such as COM1, COM2, etc), or the word
Default, to use the device specified under Options, Port. Upon dialing the
current device will be closed (if already open), and the device specified will
be opened. The modem init string will also be sent to the device after the
device has been opened.


ΓòÉΓòÉΓòÉ 6.1.7. Baud Rate ΓòÉΓòÉΓòÉ

In the Dialing Dialog Box you can enter any baud supported by the device driver
you are using. Currently the maximum baud rate supported by the device driver
included with OS/2 is 115,200. Commonly used baud rates are: 300, 1200, 2400,
9600, 19200 and 38,400. To select a baud rate use the drop down list box and
choose the appropriate rate. If you select the Default option for the baud rate
Pmcomm will use the baud rate set up under Options, Port and the default baud
option.


ΓòÉΓòÉΓòÉ 6.1.8. Parity ΓòÉΓòÉΓòÉ

The supported parities are: None, Even, Odd, Marked, and Space. To enter a
parity, type in one of the above words. The two most widely used parities are
None and Even. If you are calling most BBS's you would want to enter None, but
most packet networks (such as CompuServe and Telenet) normally require Even
parity.


ΓòÉΓòÉΓòÉ 6.1.9. Data Bits ΓòÉΓòÉΓòÉ

Currently supported data bits are 5, 6, 7, and 8. The most popular values are 7
and 8. For most BBS's 8 data bits are necessary, however, for systems such as
CompuServe, 7 data bits are required.


ΓòÉΓòÉΓòÉ 6.1.10. Stop Bits ΓòÉΓòÉΓòÉ

Currently supported stop bits are 1, 1.5 and 2. Most systems will require 1
stop bit.


ΓòÉΓòÉΓòÉ 6.1.11. Dial Script ΓòÉΓòÉΓòÉ

The script name can be up to 12 characters long. The script must be in the
script path (see Paths for more information). Any REXX script, Internal script,
or any OS/2 executable can be executed. Once Pmcomm is connected to the remote
computer this script will be executed.


ΓòÉΓòÉΓòÉ 6.1.12. Dial Terminal ΓòÉΓòÉΓòÉ

The currently available terminal emulations are TTY, ANSI, VT100, and VT220.
Pmcomm will switch to the terminal emulation listed once connected to the
remote computer.


ΓòÉΓòÉΓòÉ 6.1.13. Dial Memo ΓòÉΓòÉΓòÉ

The Dial Memo field allows a user to store information that pertains to that
number. An example would be to store a password in this field, so that a user
would not forget what their password is. A user can setup a macro key to send
the information in the memo field (see Macros_Setup, for more information).


ΓòÉΓòÉΓòÉ 6.1.14. Dial KeyMap ΓòÉΓòÉΓòÉ

The Dial KeyMap field allows a user to load a different key map for each
dialing entry. If you wish to use a new key map, then just type the name of the
key map (it must have a .map extension), in this field and a key map with some
default definitions will be created. If you wish to use an existing key map
just select it from the drop down list. If you select default then the default
key map for the terminal emulation selected will be used.


ΓòÉΓòÉΓòÉ 6.1.15. Phone Rate ΓòÉΓòÉΓòÉ

This field allows Pmcomm to calculate the amount of money that is being spent
while online. This will only work if you have Pmcomm and your modem setup to
Monitor_DCD. This value should be expressed in dollars ( or whatever currency).
For example if it costs 23 cents a minute to connect to a number, then you
should put .23 in this field. If it costs a dollar and 15 cents then 1.15
should be entered. The value enter should be the cost per minute.


ΓòÉΓòÉΓòÉ 6.2. Send Break ΓòÉΓòÉΓòÉ

Some computers when directly connected with a serial cable, need a break signal
in order to initialize a connection. See your system administrator to see if
this needs to be used with your system.


ΓòÉΓòÉΓòÉ 6.3. Initialize Modem ΓòÉΓòÉΓòÉ

Pmcomm automatically sends the modem initialization string to the
communications port when the user first starts Pmcomm. If for some reason you
need to re-initialize the modem, you can use the Initialize Modem command to do
so.


ΓòÉΓòÉΓòÉ 6.4. Comm Error ΓòÉΓòÉΓòÉ

When this command is used, Pmcomm queries the com device driver to see if the
com device driver has detected an error. There are four error messages that can
be displayed.

The first is "Receive queue overrun", which means that there was no room in the
device driver receive queue for a character read in from the receive hardware.
This is normally caused by the flow control not being setup correctly. Make
sure that you have hardware flow control turned on, in both your modem and in
Pmcomm.

The second message is "Receive hardware overrun", and means that a character
was not read from the hardware before the next character arrived causing a
character to be lost. When this error is received, it normally means that you
are trying to receive characters faster then your hardware is capable of. Try
reducing the baud rate that you are connected at. This error is more likely to
happen with a non-buffered UART, and on an ISA bus computer.

The third message is "Hardware detected parity error", and the fourth message
is "Hardware detected framing error". These last two messages are normally
caused by phone line noise, and by themselves, are not normally a problem.

After the errors are displayed, Pmcomm clears the errors and they will not be
displayed again, unless the error occurs again.


ΓòÉΓòÉΓòÉ 7. Transfer ΓòÉΓòÉΓòÉ

Transfer allows the use of different protocols to send and receive files from a
remote computer. The protocol options are Xmodem_Checksum, Xmodem_CRC,
1K-Xmodem, Ymodem(batch), Ymodem-g(batch), Zmodem, Kermit, CISB, and ASCII.
Zmodem is probably the best selection, when available on the remote computer.
Ymodem-G should only be used with error correcting modems.

IND$FILE is available for downloads using the VT100, and VT220 terminal
emulations only.

CAUTION:
IND$FILE currently does not have any error detection available in Pmcomm.


ΓòÉΓòÉΓòÉ 7.1. Transfer Dialog Box Help ΓòÉΓòÉΓòÉ

This dialog box displays the current status of your file transfer. The box
displays the latest status message from Pmcomm, the protocol being used, the
file name of the file being transferred, the file size, bytes already
transferred, the time remaining, and the current cps (characters per second).
There is also a status bar that visually shows the approximate percentage of
the file yet to be transferred.

The file transfer dialog box has a "Show" button that when pushed will display
the main window of Pmcomm. This option allows you to access the main window
while doing a transfer. You may do anything you wish as long as it doesn't
interfere with the com port (ie. changing the com port settings). One way this
would be useful is in viewing the scroll buffer while doing a transfer. Once
the show button has been pushed, the button will change to "Hide". If the
button is pushed at this time the main window of Pmcomm will be hidden from
view.


ΓòÉΓòÉΓòÉ 7.2. Download ΓòÉΓòÉΓòÉ

The download command brings up a dialog box for you to select the proper
protocol. If the protocol selected is not a batch protocol ( ASCII,
Xmodem_Checksum, Xmodem_CRC or 1K-Xmodem ) you will be prompted for a filename.
If you have Auto-Zmodem or Auto_CISB selected in the protocol options area,
Pmcomm will automatically start transferring as soon as the remote computer
starts to send. Zmodem is not available in the demonstration version.


ΓòÉΓòÉΓòÉ 7.3. Upload ΓòÉΓòÉΓòÉ

When sending a file to a remote computer you must select the same protocol that
the remote computer will use to receive the file. After selecting the proper
protocol, a file open dialog box will have you select the file you wish to
send. You can either double click on the file name or select the file and click
on the OK button. If you have Auto_CISB selected in the protocol options area,
Pmcomm will automatically start the transfer as soon as the remote computer
sends the transfer request. With a CISB transfer the filename is specified on
the host and the file open dialog box is not displayed.

You may also use the drag and drop feature of Pmcomm. When files are dragged
from a drive object and dropped onto Pmcomm, the transfer protocol that is
listed for that phone number will be invoked and the file(s) will be sent to
the remote computer. If you have Monitor_DCD selected then drag options will
not be allowed until connected with another computer.

To drag files from a drive object, select a file (or files) and then click on
the selected file(s) with the LEFT mouse button and then press and hold the
button RIGHT mouse button down. Once you have begun to drag the files with the
mouse the mouse pointer will change shape. If the mouse pointer is over a
program that does not accept drag and drop the pointer will again change shape.
When the mouse pointer is over any part of Pmcomm you can release the right
mouse button. This will drop the files onto Pmcomm and Pmcomm will send them.
This will even work if Pmcomm is an icon.

To change the protocol for the current phone number, select upload from the
menu and then select the protocol you want (make sure that the save to dialing
directory is selected). After pressing the OK button the file open dialog box
will be displayed. Just press cancel and you can now use the drag and drop with
the new protocol.

If a file is dropped onto Pmcomm before it has been invoked, while it is an
icon in a folder or on the Desktop, this file will be used as a setup file, and
Pmcomm will be invoked.


ΓòÉΓòÉΓòÉ 7.3.1. Xmodem Checksum ΓòÉΓòÉΓòÉ

Xmodem Checksum is one of the oldest protocols around and some people still use
it exclusively. It is a moderately fast protocol that has fairly good error
detection.


ΓòÉΓòÉΓòÉ 7.3.2. Xmodem CRC ΓòÉΓòÉΓòÉ

Xmodem CRC and Xmodem_Checksum are similar except CRC has better error
detection than Checksum. Almost anywhere you call will offer at least one of
these protocols.


ΓòÉΓòÉΓòÉ 7.3.3. 1k-Xmodem ΓòÉΓòÉΓòÉ

1k-Xmodem uses the same error detection as Xmodem_CRC, but uses 1024 byte
blocks instead of 128 byte blocks. This allows for greater throughput (higher
characters per second) with roughly the same error detection.


ΓòÉΓòÉΓòÉ 7.3.4. Ymodem ΓòÉΓòÉΓòÉ

Ymodem uses the same error detection and block size as 1k-Xmodem but is a batch
protocol. This means that in the first block the file size and name are sent.
This keeps the receiver from having to type in the filename. It also allows you
to send more than one file without having to start the transfer again. This
protocol is second to Zmodem, in our opinion, when using non-error correcting
modems.


ΓòÉΓòÉΓòÉ 7.3.5. Ymodem-g ΓòÉΓòÉΓòÉ

Ymodem-g is identical to Ymodem except it has no error correction. If an error
is detected the transfer aborts. Because of this Ymodem-g should only be used
with error correcting modems. Pmcomm will allow you to use this protocol
anytime, but again care should be taken on what hardware it is used with. With
the proper hardware Ymodem-g has the fastest cps (characters per second).


ΓòÉΓòÉΓòÉ 7.3.6. Zmodem ΓòÉΓòÉΓòÉ

Zmodem is almost as fast as Ymodem-g, however Zmodem does support error
correction and file recovery. It only takes one aborted Ymodem-g transfer to
lose all it's advantages. Zmodem has many advantages as far as the user is
concerned. It is probably the easiest protocol to use. If using Pmcomm with the
Auto-Zmodem download feature, the whole download is done automatically from the
Pmcomm end. You have to select the file from the sender (BBS etc..) and once
the sender starts sending, the transfer will begin on Pmcomm. It may take a
moment before the sender sends the first sequence, so wait a moment. Some of
the advanced features of Zmodem are listed below. Zmodem supports:

 1. CRC-32 and CRC-16. The additional error detection of 32 bit CRC is
    supported.

 2. File recovery. If a Zmodem download is aborted for any reason the transfer
    will resume at the point where it was  aborted. You don't have to start the
    whole transfer over.

 3. Auto-Download. When a Zmodem sending program starts up it first sends a rz
    and then a carriage return. Pmcomm will monitor for the startup sequence
    and automatically start the Zmodem download. Great care has been taken to
    make sure that it really is a Zmodem transfer and not someone typing it in
    at the keyboard (at either end). This feature makes downloading with Zmodem
    much faster and much easier.

 4. Variable length headers. This reduces the amount of overhead that accrues
    with sending Zmodem headers. This is only used if supported by both the
    sender and receiver.

 5. Escape Control Characters. This option is useful if you are connecting via
    a media that processes control characters.

 6. Variable length receive buffers. Some Zmodem receive programs have problems
    with writing to the disk and receiving from the communication port at the
    same time. If necessary Zmodem will wait for an ACK from the receiver after
    the specified buffer size has been sent. This will only be done if it is
    requested by the receiver.

 7. Retains original file size. Some people say that because Zmodem headers are
    larger that there is two much overhead. This really isn't the case. For
    example if comparing Zmodem to Ymodem-g (full flow Ymodem), Ymodem-g has
    less overhead with each packet. However Ymodem-g rounds the file size up to
    an even 128 byte size. In some cases it is even rounded up 1024 bytes. This
    is done because Ymodem (g or otherwise) only supports two block sizes, 128
    and 1024 (the block size is actually 133 and 1029 to allow for the block
    header, STX or SOH, and the CRC value), so it has to send full blocks.
    However, Zmodem uses variable block sizes. The block sizes adjust from 32
    bytes to 1024 bytes. If telephone line quality is poor smaller blocks are
    sent so that if an error does occur less data will have to be resent. As
    the line quality improves the size of the blocks will be increased. The
    starting block size is variable depending on the connected baud rate.

 8. Error recovery. Because Zmodem can resend from any place in the file,
    aborted transfers are rare.

By reading this you can tell our favorite protocol is Zmodem. Once you have
used Zmodem it's hard to get used to using other protocols.


ΓòÉΓòÉΓòÉ 7.3.7. ASCII ΓòÉΓòÉΓòÉ

The ASCII protocol can be used to transfer text files. There is no error
detection or correction available with this protocol. It is recommended that
one of the other protocols be used, even with text files.


ΓòÉΓòÉΓòÉ 7.3.8. CISB ΓòÉΓòÉΓòÉ

The CIS B protocol can be used to transfer files to and from CompuServe.
CompuServe B, B+ and Quick B are supported. Quick B is the fastest variant of
the B protocol and is automatically selected when it is supported on the host
computer. The CIS B protocol is an automatic protocol where the host initiates
the transfer and Pmcomm will automatically go into the send or receive mode. If
you are sending a file, the file must exist in the download directory of
Pmcomm. If Pmcomm is unable to find the file then the transfer will abort.
Pmcomm can be configured to ignore the CIS B protocol by deselecting the
Automatic CIS B option in the Protocol Option Dialog. Pmcomm may run slightly
faster in terminal mode without this selection. Under most systems the
difference will not be detectable.

Another option for CIS B is for file recovery. What this option will do is if
you started a download and aborted the transfer you can then restart the
transfer and CIS B will resume from the place where it was aborted. This can be
very handy in poor phone line conditions. The packet size for CIS B is adjusted
by the connecting baud rate. For example, if you are connected to CompuServe at
2400 baud the packet size will be 1024 bytes. If you connect at 1200 baud the
packet size will be 512 bytes. This allows for speedy error recovery in case a
error occurs because of phone line noise. Downloads will automatically be
placed in the Pmcomm download directory and the download directory will
automatically searched for any uploaded files. If you specify a path with the
filename when CompuServe asks for a filename for your computer, then this path
will be used. CIS B should be the protocol used when transferring files to and
from CompuServe.

CAUTION:
If you are having throughput problems with the CISB transfer protocol, due to
multiple errors, you should switch to a different com driver. The com driver
that is currently being shipped with OS/2 has problems handling the CISB
transfer protocol at higher baud rates. There is a com driver on our support
BBS called SIO*.zip (the asterick is the lastest version, search on that file
name), that corrects the IBM com driver problem. You can also select Ymodem
from CompuServe, and then Ymodem-g from Pmcomm, and you will receive the file
at a high baud rate. This should only be attempted if you have an error
correction connection.


ΓòÉΓòÉΓòÉ 7.3.9. Kermit ΓòÉΓòÉΓòÉ

Kermit is the slowest protocol offered here and should only be used when no
other protocol is available. Kermit does have advantages and it is offered on
many minicomputers as well as mainframes. Kermit will also transfer binary
files when connected at 7,E,1. The maximum packet size that is allowed is 94
bytes which is one of the reasons that makes Kermit slow. There is a variation
of Kermit that allows larger packet size, but it is not implemented in Pmcomm.
Kermit allows batch transfers, both in sending and receiving, and will attempt
to preserve the file names. If Pmcomm gets an error when trying to create the
file name received from the sender it will convert it to a "8.3" type of file
name. Kermit allows variable packet sizes so the original file size is
maintained.

Pmcomm allows you to change the "End of Line" character (also called end of
packet), the "Quoting character" (sent before control codes), the "pad
character", and the number of pad characters you want. You can also tell Pmcomm
to force an 8 bit transfer even if it is on at 7,E,1. This comes in handy if
you are downloading files from CompuServe. If this option is not selected and
you are on at 7 data bits, Pmcomm will use what is called the 7 bit quoting.
The 7 bit quote character that Pmcomm uses is a &.


ΓòÉΓòÉΓòÉ 7.3.10. IND$FILE ΓòÉΓòÉΓòÉ

IND$FILE currently is only supported under VT100 and VT220 terminal emulations
through a 3708 protocol converter. Because of problems with character
conversion through the protocol converter error detection is not currently
available. Because of this, files received using IND$FILE maybe CORRUPTED! Use
this protocol at your own risk! IND$FILE is not a very efficient protocol
because every byte that is transferred must be checked to see if it will pass
through a 7 bit data stream and escaped if it will not. This can greatly reduce
the amount of data that can be sent in each packet.


ΓòÉΓòÉΓòÉ <hidden> PC File Name ΓòÉΓòÉΓòÉ

This is the file name which will be used on the receiver. If a full path and
file name are used the file will reside at that address. If just a file name is
specified the file will be stored in the upload directory set in the Paths menu
option. This file name must be specified or the transfer will not work.


ΓòÉΓòÉΓòÉ <hidden> Host File Name ΓòÉΓòÉΓòÉ

This is the file name as it resides on the Host. If this filename is not
specified, Pmcomm will default to the PC File Name as the Host File Name.


ΓòÉΓòÉΓòÉ <hidden> Binary ΓòÉΓòÉΓòÉ

This option will tell the Host to send the file as a Binary file.


ΓòÉΓòÉΓòÉ <hidden> Ascii ΓòÉΓòÉΓòÉ

This option will tell the Host to send the file as an Ascii file.


ΓòÉΓòÉΓòÉ <hidden> CRLF ΓòÉΓòÉΓòÉ

This option will tell the Host to send a "carriage return line feed" after each
record. This option will be needed on most Ascii file transfers while rarely
needed with a Binary file transfer.


ΓòÉΓòÉΓòÉ 7.3.11. Save to Dial Directory ΓòÉΓòÉΓòÉ

When this option is selected the file transfer protocol that is selected will
be saved into the dialing directory for this number. The next time a file
transfer is used when connected to this number this same protocol will be
selected and all the user will have to do is press the OK button. If you do not
want this protocol save then deselect this option.


ΓòÉΓòÉΓòÉ 8. FTP ΓòÉΓòÉΓòÉ

The FTP command allows users to send/receive files to/from FTP servers. IBM's
TCP/IP must be installed for this command to function. Once this command has
been selected a dialog box will prompt the user, for necessary information to
complete the file transfer. There is also a ping button that will attempt to
ping the remote host. This allows the user to make sure that the remote host is
up and able to answer requests.

CAUTION:
Once an FTP transfer has been started, it can not be canceled, except by
re-booting the computer. If Pmcomm is closed, it may take sometime before the
transfer stops, and Pmcomm actually closes. If Pmcomm is closed during an FTP
transfer the file will not completely transfer.


ΓòÉΓòÉΓòÉ 8.1. FTP Host Name ΓòÉΓòÉΓòÉ

This field is for the remote host name that you wish to connect to. You can
enter either the IP address or the name. For example to connect to the FTP site
here, at Multi-Net Communications, you would enter ftp.multinet.com.


ΓòÉΓòÉΓòÉ 8.2. FTP User Name ΓòÉΓòÉΓòÉ

This field is for the user name that you wish to use when connecting to the
remote host. For example to log onto our anonymous FTP site you would enter the
word anonymous as the user name.


ΓòÉΓòÉΓòÉ 8.3. FTP Password ΓòÉΓòÉΓòÉ

The password required by the host system for the user name you are using should
be entered in this field. Most anonymous systems require that the user enter
there mail id, such as [e-mail].


ΓòÉΓòÉΓòÉ 8.4. FTP Account ΓòÉΓòÉΓòÉ

Most host FTP servers do not require an account, but if the server you are
connecting to does, you would enter it is this field.


ΓòÉΓòÉΓòÉ 8.5. FTP Local File Name ΓòÉΓòÉΓòÉ

The local file name will be use for both the put and the get transfer
direction. For the put direction, the local file name is the one that will be
sent to the FTP server. For the get direction, the local file name will be used
when creating the received file. The file name must include the full drive and
path name.


ΓòÉΓòÉΓòÉ 8.6. FTP Remote File Name ΓòÉΓòÉΓòÉ

The remote file name, is that name of the file that will be retrieved from the
remote FTP server (get) or created on the remote FTP server with the put
direction.


ΓòÉΓòÉΓòÉ 8.7. FTP Write Options ΓòÉΓòÉΓòÉ

The write options are only in effect with the get direction. With the append
mode the incoming file will be added to the end of the file if it already
exists. With the overwrite mode the file will be deleted before any new
information is received.


ΓòÉΓòÉΓòÉ 8.8. FTP Transfer Options ΓòÉΓòÉΓòÉ

There are two transfer options, Binary, and Ascii. For text file the Ascii
option can be used, and the binary option should be used for all other file
types.


ΓòÉΓòÉΓòÉ 8.9. FTP Transfer Direction ΓòÉΓòÉΓòÉ

The FTP in Pmcomm allows you to both send and receive files. The get direction
transfers files from the remote FTP server to your computer, and the put
direction sends a file from your computer to the remote FTP server.


ΓòÉΓòÉΓòÉ 8.10. FTP Ping Host ΓòÉΓòÉΓòÉ

The ping host button, sends a message to the remote host and waits for a
response, from the remote host. Pmcomm then displays a message tell the user
how long it took to receive the response, or that the host did not respond.
Your TCP/IP link must be active or this command may hang the computer.


ΓòÉΓòÉΓòÉ 9. Hangup ΓòÉΓòÉΓòÉ

Hang-up sends the hang-up command string (see the Option menu) and optionally
drops the DTR line to the modem. Dropping DTR is the most effective if your
modem is setup to hang-up when DTR is dropped. Using a hang-up string is also
slower because Pmcomm has to get the modem into the command state before
sending the hang-up string. If you have DTR on and delete the hang-up string
the hang-up will be much faster. The default string is : +++~~~~ATH^M. The +++
is the default modem attention string, which puts the modem into the command
state. The ~~~~ will make Pmcomm pause 2 seconds (.5 seconds per ~) and then
the ATH will force the modem to go on-hook (hangup). The ^M sends a carriage
return line feed combination.


ΓòÉΓòÉΓòÉ 10. Options ΓòÉΓòÉΓòÉ

Option allows you to tailor Pmcomm to your own tastes. The areas in option are:
Port, Dial_Setup, Modem, Protocols, Paths, Prompts, Macros_Setup, KeyMap,
Popup_Menu, Screen, Terminal, Multimedia, and Chat. The setup is not
automatically saved. This allows you to change things temporally without
changing your default setup file. If you do want to make the  changes permanent
be sure to save the setup file. To save the current setup file, use the
Save_setup command under the File menu option.


ΓòÉΓòÉΓòÉ 10.1. Port ΓòÉΓòÉΓòÉ

The device name should be a valid communication device name. Some third party
device drivers allow you to use names other then COM1, COM2, etc., so Pmcomm
does not limit you to these names. Hardware flow control and DTR should be on
for most modems.


ΓòÉΓòÉΓòÉ 10.1.1. Device Open Error Retries ΓòÉΓòÉΓòÉ

This is the number of attempts Pmcomm will try to open a device. After the
specified number of attempts Pmcomm will exit. If 0 is entered, Pmcomm will not
retry the device. This option is generally used to access a shared
communication port (i.e. modem pool).


ΓòÉΓòÉΓòÉ 10.1.2. Seconds Between Retries ΓòÉΓòÉΓòÉ

This is the number of seconds Pmcomm will wait before retrying to open a
device.


ΓòÉΓòÉΓòÉ 10.1.3. Device Name ΓòÉΓòÉΓòÉ

The device name should be a valid communication device name. Some third party
device drivers allow you to use, and in some cases require that you use, names
other then COM1, COM2, etc., so Pmcomm does not limit you to these names. If
you are using Pmcomm across a LAN then normally there will be an Alias name for
the communication port you are using on the server. See your LAN administrator
for the Alias name(s) that you should use to access the modem(s). If you get a
device open error when trying to open a com port, you can change the com port
by just typing in a new com port name. For example if you had COM1 as the
device name, and that device is used by your mouse, you will get a dialog box
that will allow you to change the name by just typing in the new name. To see
if a device is valid, you can go to an OS/2 prompt and type in mode COM1 (where
COM1 is the device you want to check). If you get an error from OS/2 about the
device not being available, the one of the follow problems exists: 1. Device
already in use. 2. The com.sys driver is not installed in your config.sys (not
needed if use a com port on a server). 3. OS/2 could not install that com port
when you booted your computer.

If this last problem exists then you should contact IBM OS/2 defect support for
help getting your com port to install.


ΓòÉΓòÉΓòÉ 10.1.4. Hardware Flow Control ΓòÉΓòÉΓòÉ

Hardware Flow Control is generally the most reliable method of flow control.
There are two basic times when flow control is needed. First, if Pmcomm is
sending information to the modem faster than the modem is able to send the
information flow control is needed. If flow control is not enabled then a
transmission error will occur. Second if the modem is sending information to
Pmcomm faster then Pmcomm can receive it, then Pmcomm will try to tell the
modem to stop sending the information. This can occur when an excessive amount
of processing is being performed on the computer. Hardware Flow Control uses
two modem signals to control the flow of information. For send flow control the
CTS modem line is used. For receive flow control the RTS modem line is used. If
your modem supports these flow control signals, then setup your modem and
Pmcomm for Hardware Flow Control.


ΓòÉΓòÉΓòÉ 10.1.5. XON/XOFF Flow Control ΓòÉΓòÉΓòÉ

Xon/Xoff Flow Control should only be used when Hardware_Flow_Control is not
available and when flow control is necessary. The only two file transfers that
will work correctly with Xon/Xoff are ASCII and Zmodem. The only other protocol
that should need flow control is Ymodem-g.


ΓòÉΓòÉΓòÉ 10.1.6. Use DTR ΓòÉΓòÉΓòÉ

DTR stands for Data Terminal Ready, which by lowering DTR you can signal the
device you are communicating with (usually a modem) that you wish to go off
line. If you are connected to a modem you should set the modem up to go on-hook
when the modem detects a drop in DTR. The command for a Hayes 2400 baud modem
is AT&D2. If this option is selected in Pmcomm, then DTR will be dropped when
the hangup command is selected, or after each redial attempt.


ΓòÉΓòÉΓòÉ 10.1.7. Monitor DCD ΓòÉΓòÉΓòÉ

DCD stands for Data Carrier Detect and is pin 8 on an RS-232C cable. When a
carrier is detected by the modem, Pmcomm assumes that you are connected to a
remote computer. If DCD is not supported by your modem or other hardware, then
this option should be turned off. With this option turned on, if no DCD is
present then Pmcomm will not Hangup, or go into a file transfer. The drag and
drop from the file manager will also be disabled. The command for a Hayes 2400
baud modem is AT&C1. This will have the modem track the state of DCD.


ΓòÉΓòÉΓòÉ 10.1.8. Default Baud ΓòÉΓòÉΓòÉ

The default baud is the baud rate that the communication port is set to when
Pmcomm is first executed. The baud rate is changed to the value in the dialing
directory when a number is dialed. Normally the default baud should be set to
the highest baud rate supported by your modem. If you have Pmcomm connected
directly to another computer with a NULL modem cable, then you want to set this
baud to the same baud rate that the other computer is using.


ΓòÉΓòÉΓòÉ 10.1.9. Default Data Bits ΓòÉΓòÉΓòÉ

This selection allows you to select the number of data bits that will be used
when the communications port is initially opened. This option will be
overridden with the parameters listed in the dialing directory once you have
connected with a remote computer.


ΓòÉΓòÉΓòÉ 10.1.10. Default Parity ΓòÉΓòÉΓòÉ

This selection allows you to select the parity that will be used when the
communications port is initially opened. This option will be overridden with
the parameters listed in the dialing directory once you have connected with a
remote computer.


ΓòÉΓòÉΓòÉ 10.1.11. Default Stop Bits ΓòÉΓòÉΓòÉ

This selection allows you to select the number of stop bits that will be used
when the communications port is initially opened. This option will be
overridden with the parameters listed in the dialing directory once you have
connected with a remote computer.


ΓòÉΓòÉΓòÉ 10.1.12. Exit on Hangup ΓòÉΓòÉΓòÉ

This selection will cause Pmcomm to exit, once you have called a remote
computer and then DCD has dropped. You must have monitor dcd selected in order
for this command to work. This command is useful if you wish to just call one
number and then have Pmcomm exit.


ΓòÉΓòÉΓòÉ 10.2. Dial Setup ΓòÉΓòÉΓòÉ

This allows you to select a dialing_directory from a list box and also lets you
setup the prefix and suffix of the number to be dialed. There is a list box
that will allow you to select how the dialing directory will be sorted. You can
sort the dialing directory by name, number, baud rate, last on, number of times
called, download cps, upload cps, dial prefix, and dial suffix. You can also
select either ascending or descending order.


ΓòÉΓòÉΓòÉ 10.2.1. Queue Dial On Hangup ΓòÉΓòÉΓòÉ

If this option is selected, Pmcomm will automatically start dialing the
selected entries in the dialing directory, once the current connection has
disconnected. In order for this option to work, you must have Monitor DCD
selected, under Options, Port. This option is useful if you routinely call a
number of dialing directory entries at a time.


ΓòÉΓòÉΓòÉ 10.2.2. Dial Auto Selected Entries ΓòÉΓòÉΓòÉ

If the Dial Auto Selected Entries on program Startup is selected then any
entries in the dialing directory that are marked as automatically_selected ,
will automatically be dialed. This option will allow you to automatically dial
selected numbers when Pmcomm is first invoked. This can be very useful if you
dial the same numbers each time you run Pmcomm.


ΓòÉΓòÉΓòÉ 10.2.3. Sort Dialing Directory ΓòÉΓòÉΓòÉ

The dialing_directory can be sorted by either the name, phone number, baud
rate, last time called, number of times called, download characters per second,
upload characters per second, dial prefix, or dial suffix. The directory can be
sorted in either ascending or descending order. For example you can sort the
dialing directory by last time called in descending order, and all the most
recently called numbers will be displayed at the top of the dialing directory.


ΓòÉΓòÉΓòÉ 10.2.4. Dialing Directory List ΓòÉΓòÉΓòÉ

A list of the available dialing_directories are displayed in a list box, so
that a default directory can be selected. The selected directory will
automatically be loaded when Pmcomm is started. You can add additional
directories by pressing the add button.


ΓòÉΓòÉΓòÉ 10.3. Modem ΓòÉΓòÉΓòÉ

The initialization string should have the commands in it to enable word result
codes, hang-up when DTR is dropped and enable hardware flow control. Not all of
these are supported by all modems but use them when possible. Pause before
redial is the time Pmcomm waits before trying to redial a number. "Seconds to
wait for carrier" is how long Pmcomm will wait for a connection before
redialing.

By clicking on the configure button you may add new modems to Pmcomm.


ΓòÉΓòÉΓòÉ 10.3.1. Modem Name ΓòÉΓòÉΓòÉ

These are the names of the modems that you have stored in Pmcomm. The
initialization string for that particular modem shows in the Modem
Initialization String edit field. To add a new modem or change an existing
modem, click on the configure button.


ΓòÉΓòÉΓòÉ 10.3.2. Modem Initialization String ΓòÉΓòÉΓòÉ

Initialization string should have the commands in it to enable word result
codes, hang-up when DTR is dropped and enable hardware flow control. Not all of
these are supported by all modems, but use them when possible. Pmcomm's default
modem string is for a Hayes 2400 baud modem. This is the default string:

AT&F&D2&C1M0Q0S2=255S10=30X4


ΓòÉΓòÉΓòÉ 10.3.3. Modem Pause Before Redial ΓòÉΓòÉΓòÉ

Pmcomm will pause for the specified number of seconds before attempting to
redial a phone number. Some phone systems take a few seconds before you can
redial a phone number. The default value is 3 seconds and should work for most
phone systems.


ΓòÉΓòÉΓòÉ 10.3.4. Modem Dial Timeout ΓòÉΓòÉΓòÉ

Pmcomm will wait for a Connect or Carrier message from the modem for up to 64
seconds. The S7 register of the modem must also be set to a value at least as
great as the dial timeout value. This can be done by issuing the following
command to the modem: ATS7=30. This would set the modem to timeout after 30
seconds. Setting the dial timeout to a value greater then 30 would not be
effective because the modem would still timeout after 30 seconds. The default
timeout value for Pmcomm is 60 seconds.


ΓòÉΓòÉΓòÉ 10.4. Protocols ΓòÉΓòÉΓòÉ

The options under protocols are:

Auto Zmodem Download.

Auto Zmodem String.

Overwrite Existing Files

Rename Duplicate Files

Zmodem Resume.

Compare File Dates.

Ignore File Dates.

Zmodem CRC-32.

Zmodem CRC-16.

Zmodem Variable Headers.

Auto CISB Transfer.

CISB file recovery.

Import File line delay.

View GIF during transfer.

Force 8 bit transfer.

End of line character.

Control quote character.

Number of pad characters.

Pad character.

IND$FILE.

Auto Zmodem makes Pmcomm check for a Zmodem start sequence. The string that
Pmcomm checks for can be changed. This is the Auto Zmodem String. The standard
string is an rz followed by a carriage return (to enter a carriage return hold
down the ALT key and press 1,3 on the numeric key pad). When this string is
received, Pmcomm will automatically start receiving the file.

The options to overwrite or rename existing files only are in effect if a
Zmodem resume fails. If you have rename selected, and a file exists with that
name then Pmcomm will rename the new file with a number for an extension. For
example if you have a file called allfiles.txt in your download directory, and
you download a file with the same name (without Zmodem resume) the new file
will be named allfile1.txt. If allfile1.txt exists then the new file will be
called allfile2.txt.

Zmodem resume allows Zmodem to resume a file transfer that was previously
aborted. The compare and ignore file dates options, determines if Pmcomm will
check the date of the file on the disk, to see if it should resume the
transfer. These options are only in effect if the Zmodem resume is selected.
Some Zmodem systems do not send the date in the Zmodem header. If a resume is
required for these systems, then ignore file dates should be selected.

CRC-32 has improved error correction but is slightly slower. If CRC-32 is not
available Pmcomm will switch to CRC-16.

If the Zmodem Variable headers has been selected then Pmcomm will allow for
variable length headers. Use this option only if it is supported by the host.

Zmodem is only available on commercial versions.

Auto CISB is similar to Auto Zmodem except that both uploads and downloads can
be started this way. This feature is for the CISB file transfer protocol. CISB
file recovery allows CISB to resume a file transfer that was previously
aborted.

The IND$FILE protocol may also be selected for downloads.

CAUTION:
The IND$FILE file transfer protocol in Pmcomm, currently, does not support any
error detection.

The View Gif during transfer option, will allow the user to view a GIF file
while it is being downloaded. The GIF file viewer can be cancel anytime during
the transfer by pressing F3. The GIF file viewer is not available with the
IND$FILE or Ascii file transfer protocol. If you have a slow video or computer
it is recommended that this option be turned off. The GIF file viewer does not
support 24 bit color dithering, to speed up the display of the GIF. Because of
this the image may appear differently once it has been downloaded, and viewed
using a GIF viewer.

The rest are Kermit options and should be made to match your host.


ΓòÉΓòÉΓòÉ 10.5. Paths ΓòÉΓòÉΓòÉ

The working path MUST be set to the path that Pmcomm is installed in. The
working path is stored in the os2.ini file. This is done so that the pmcomm.exe
file can reside on a server, but yet each requester can have there own
setup.dat file. The download path allows you to have the files that you
download put into a different directory. The upload path is the path that the
fileopen dialog will default to when doing a upload. The script path is where
Pmcomm looks for the scripts listed in the dialing directory. The startup
script is a script that will be executed each time Pmcomm is started. The
default name is startup.scr.

The printer device, is the device that you want any printing to be sent to. The
default is PRN, but can be changed to other devices, such as LPT1, LPT2.

The capture path is where all screen captures are stored. These paths must
contain a valid directory. It defaults to the directory that Pmcomm was started
from. There is also a call logging option here which when turned on will start
call logging as soon as Pmcomm is run.


ΓòÉΓòÉΓòÉ 10.6. Prompts ΓòÉΓòÉΓòÉ

This option allows the user to set Pmcomm up to prompt them when certain
conditions occur.


ΓòÉΓòÉΓòÉ 10.6.1. Hangup Prompt ΓòÉΓòÉΓòÉ

When this prompt is turned on, the user will be prompted to verify that they
wish to hangup the phone. If monitor DCD is also turned on, then the user will
only be prompted if DCD is not present.


ΓòÉΓòÉΓòÉ 10.6.2. Save Screen Size ΓòÉΓòÉΓòÉ

By default Pmcomm will prompt the user whenever the screen size has changed,
when exiting Pmcomm. By turning this option off, the user will not be prompted
and the new screen size will not be saved. If the Pmcomm setup file is saved
then the screen size will also be saved.


ΓòÉΓòÉΓòÉ 10.6.3. Save Setup Prompt ΓòÉΓòÉΓòÉ

If the Pmcomm setup has been changed, Pmcomm will prompt the user, asking if
they would like to save the setup file. By turning off this option, the user
will not be prompted and the setup file will not be saved.


ΓòÉΓòÉΓòÉ 10.6.4. Capture Prompt ΓòÉΓòÉΓòÉ

Normally if capture is turned on in Pmcomm and the file already exists, then
the user will be informed, and asked if they wish to overwrite the file. With
this option turned off, the user will not be prompted and the file will be
overwritten.


ΓòÉΓòÉΓòÉ 10.7. Macros Setup ΓòÉΓòÉΓòÉ

There are 10 user definable keyboard macros. These can be invoked by holding
down the Alt key and pressing 1-0 or by clicking on the appropriate button on
the Button Bar. Use this option to setup your macros.


ΓòÉΓòÉΓòÉ 10.7.1. Macro Command ΓòÉΓòÉΓòÉ

Macros can be implemented by using combinations of the following commands.

Use ^M to send a carriage return. When the macro is invoked it will send the
string that you have defined to the modem. Once you have setup the macro
string, it can also be selected from the main menu using a mouse. Other special
characters are:

^H = tab character.

^J = carriage return without a line feed.

^L = form feed.

^[ = escape character (Ascii 27)

^C = send the Ctrl-C character (Ascii 3)

^K = XON character

^S = XOFF character

~  = sleep for half a second

You can also send any other special character by holding down the Alt key and
typing in the ASCII number on the numeric key pad. For example, if you want to
enter the escape character into a macro you could hold down the Alt key and
then press the two and the seven on the numeric key pad (while still holding
down the Alt key). When you then release the Alt key the escape character would
be inserted into the macro. Scripts can be executed from macros by using the
shell command. An example of this would be:

shell("c:\pmcomm\plane.cmd");

This would execute the REXX script called plane.cmd. This allows you a quick
and easy way to execute often used scripts.

The information in a memo field (in the dialing directory), for the number
connected, can also be sent by entering the word memo in a macro. This would
allow a user to send information (such as a password) to the remote computer.
By doing this it allows a user to use the same macro key to send different
passwords, for each dialing directory entry.

Multimedia files can be played from a macro as well, with the play_wave
command. The play_wave command will play any file that is supported by OS/2.
This includes wav, mid, and avi file formats. The syntax for this command is :

play_wave("c:\mmos2\sounds\bach.mid");


ΓòÉΓòÉΓòÉ 10.7.2. Macro Name ΓòÉΓòÉΓòÉ

Enter the name of your macro in this field. We suggest using names that will be
meaningful to you at a later date.


ΓòÉΓòÉΓòÉ 10.8. Keymap ΓòÉΓòÉΓòÉ

The Key Map function of Pmcomm allow you to re-map the keys on the board to
different functions. The name of the current key map will be displayed in the
title bar of the Key Map dialog box. Different default key maps can be assigned
to each terminal emulation. Key maps can also be selected for each dialing
entry in the dialing directory, and this dialing entry will be the one used
once connected to the remote computer. This key map will still be in effect
until the next number is dialed, even after being disconnected from the remote
computer.

Keys can be re-mapped to send different characters, for example you could
re-map the z key to send a Z, or any other character.

Keys can also send strings instead of single characters. The same rules applies
to the strings in key mapping as it does to the macro commands (see Macro
Command for more information).

Keys can be re-mapped to perform any of the Pmcomm menu commands, or OS/2
system menu commands (see Key Command for more information).

Combination keys can also be re-mapped. An example is if you wanted to re-map
the ^P key ( sent by holding down the Ctrl button on the key board and then
pressing the P key). To re-map this key you would select the P button (on the
Key Map dialog box), and the Control check box.

Note:  The alpha numeric keys (a-z, 1-0, etc) are Caps Lock sensitive. For
example if you want re-map the ^P key you must have the Caps check box selected
in the Key Map dialog box. If you want to re-map the ^p key then the Caps check
box would not be selected. Also, ^P with the Caps check box selected, is not
the same as ^P and the Shift check box selected. Selecting the Shift check box,
means that you will be holding down the shift key when you press the other key,
or keys. The keys on the numeric key pad are sensitive to the state of the Num
Lock, in much the same way. This allows you to define both the 1, and the End
keys (for example) on the numeric key pad.

You can also use multiple combinations, such as Control, Alt, P. Normally the
biggest confusion when using the key map is that you can define so many
combinations. Make sure that you do define all the combinations that you are
going to use (ie. caps lock on, caps lock off, etc).

The Shift check box would be selected when you plan on holding down the shift
key when press the other key. The same follow for the Control and Alt check
boxes. You can also combine these, for example you could re-map a key that you
want to have the Control and Shift key pressed.

Note:  The Lone Key check box is a special case, and can not be used in most
cases. The only time that it can be used is in conjuction with the Shift, Ctrl,
and Alt keys on your keyboard, when you wish to re-map just those keys. If one
of these keys are pressed and released without another key being pressed then
Pmcomm will check to see if one of these keys have been re-mapped with the Lone
key option.

By selecting the Lone Key check box you can assign a map to the shift, ctrl, or
alt, keys and not effect there operation when they are used with other keys.


ΓòÉΓòÉΓòÉ 10.8.1. Key Command ΓòÉΓòÉΓòÉ

There are four types of commands:

Character.

String.

Pmcomm menu.

OS/2 system menu.

Characters are sent just by typing the character you want to send in the
Current Key Assignment combination box in the Key Map dialog box. Single
characters are not parsed in anyway, but just sent directly to the com port.

Strings are series of characters that you type into the Key Map dialog box, and
are parsed just as Macros are (see Macro Command for more information).

Pmcomm menu commands are any of the commands that you can execute from the
Pmcomm menu. These commands can be selected from the Key Assignment combination
box. They are as follows:

<HELP>

<DIAL>

<QUEUE DIAL>

<EXIT>

<KEY MAP>

<SCROLL BUFFER>

<COM ERROR>

<CHAT>

<ABOUT>

<DOWNLOAD>

<UPLOAD>

<HANGUP>

<SETUP PORT>

<SETUP MODEM>

<SETUP PROTOCOL>

<SETUP PATHS>

<SETUP STATUS>

<SETUP SCREEN>

<SETUP TERMINAL>

<SETUP MACROS>

<SETUP DIAL>

<SAVE SETUP>

<SEND BREAK>

<INIT MODEM>

<CANCEL SCRIPT>

<START SCRIPT>

<START SCRIPT GEN>

<CANCEL SCRIPT GEN>

<SHOW SCRIPT DIALOG>

<START CAPTURE>

<CANCEL CAPTURE>

<CLIPBOARD PASTE>

<CLIPBOARD COPY>

<CLIPBOARD APPEND>

<PRINT SCREEN>

<PRINT SCREEN BUFFER>

<PRINT SELECTED>

<START CONTINUOUS PRINTING>

<CANCEL CONTINUOUS PRINTING>

<FILE IMPORT>

<START LOGGING>

<CANCEL LOGGING>

<CLEAR SCREEN>

<SEND MACRO 1>

<SEND MACRO 2>

<SEND MACRO 3>

<SEND MACRO 4>

<SEND MACRO 5>

<SEND MACRO 6>

<SEND MACRO 7>

<SEND MACRO 8>

<SEND MACRO 9>

<SEND MACRO 10>

OS/2 system commands are commands that OS/2 processes. These commands can also
be selected from the Key Assignment combination box. They are as follows:

<SC_CLOSE>

<SC_MOVE>

<SC_MINIMIZE>

<SC_MAXIMIZE>

<SC_SIZE>

<SC_NEXT>

<SC_APPMENU>

<SC_SYSMENU>

<SC_RESTORE>

<SC_TASKMANAGER>

<SC_HELPKEYS>

<SC_HELPINDEX>

<SC_HELPEXTENDED>

<SC_HIDE>

There are three variables that can also be used to send special characters.
They are:

<CSI>

<SS3>

<ESC>

The < and > must be used, and they are case sensitive. These variables are very
useful when using the VT100 and VT220 terminal emulations. The <CSI> and the
<SS3> will change depending on if you are using 7 or 8 data bits, and if your
host wants 7 or 8 bit escape codes. The CSI is generally used for the leading
characters of the function keys. The SS3 is used for the leading characters for
the application keys (the numeric key pad keys). The default for CSI in 7 bit
mode is ESC[ and for SS3 it's ESCO, where ESC is the escape character (Ascii
0x1b). If a key map has not re-mapped the keys then Pmcomm defaults to the
standard VT100 and VT220 key definitions as in past versions.

Pmcomm will allow you to send control characters by using the ^. For example if
you want to send a control J (linefeed) you would enter a ^J in the edit field.
This will work for control A thru control Z.


ΓòÉΓòÉΓòÉ 10.9. Popup Menu ΓòÉΓòÉΓòÉ

The Popup Menu is a user definable menu that is activated by clicking the RIGHT
mouse button on the Pmcomm screen. Any of the menu items in the normally Pmcomm
menu can be added to the Popup Menu along with any of the OS/2 system menu
commands. The main advantage to using the Popup Menu over the normal Pmcomm
menu is that when you click with the right mouse button the menu comes up near
the location of the mouse pointer. This allows quick and easy access to menu
commands that you regularly use.


ΓòÉΓòÉΓòÉ 10.9.1. Current Popup Menu ΓòÉΓòÉΓòÉ

This is a list box that shows the current Popup Menu. Items in the list box can
be selected, and then either deleted, or insert a new item above it. If you
insert an item without first selecting an item in the list box, the item will
be added to the end of the menu. This allows you to insert items to the bottom
of the menu, because when you select an item, it is always inserted above it.
You must press the Ok button in order for your changes to be saved.


ΓòÉΓòÉΓòÉ 10.9.2. Available Commands ΓòÉΓòÉΓòÉ

The available commands combo box allows you to select a command to be inserted
in the current Popup Menu. All the available commands are listed in the combo
box. Just select a command from the list and then press the insert button.


ΓòÉΓòÉΓòÉ 10.9.3. Default Menu ΓòÉΓòÉΓòÉ

The default menu is the name of the menu currently in use. The file name must
have a .men extension. New menus can be createc by just typing in a new file
name in the edit field, and then inserting commands from the Available Commands
combo box.


ΓòÉΓòÉΓòÉ 10.10. Screen ΓòÉΓòÉΓòÉ

This command allows you to tailor the screen handling to your tastes. The best
thing to do is try them to see if you like them. Some features like the
automatic horizontal scroll will probably only be used when typing messages and
chatting. The save/restore screen and scroll options, will save and restore the
previous information. The more information that is on the screen and in the
extended scroll back buffer the longer it will take for Pmcomm to exit and
start up. Reducing the size of the extended scroll back buffer will speed up
the starting and exiting of Pmcomm.


ΓòÉΓòÉΓòÉ 10.10.1. Font ΓòÉΓòÉΓòÉ

Allows you to select from a list of font sizes. The sizes depend on the display
adapter and version of OS/2 you are using. Pmcomm queries the video device
driver to see what font sizes it supports and lists them for you to select.


ΓòÉΓòÉΓòÉ 10.10.2. Foreground ΓòÉΓòÉΓòÉ

Sets up the color to be used for the text used in the Pmcomm window. There are
16 different background and foreground colors available, allowing for 256
different color combinations.


ΓòÉΓòÉΓòÉ 10.10.3. Background ΓòÉΓòÉΓòÉ

Sets up the color to be used for the Pmcomm window background. There are 16
different background and foreground colors available, allowing for 256
different color combinations.


ΓòÉΓòÉΓòÉ 10.10.4. Save/Restore Screen ΓòÉΓòÉΓòÉ

When this option is selected, Pmcomm will save the information that is
displayed on the screen, and restore it when Pmcomm is started again. This will
allow you to view the information that was on the screen from a previous Pmcomm
session. When this option is selected, it will take Pmcomm slightly long to
start and exit, as it has to read/write about 61,000 bytes of information
to/from the disk.


ΓòÉΓòÉΓòÉ 10.10.5. Save/Restore Extended Scroll ΓòÉΓòÉΓòÉ

The Save/Restore Extended Scroll option, will save and restore the information
in the extended scroll back buffer, between Pmcomm sessions. Caution should be
taken, with the size of the extended scroll back buffer. The amount of
information that has to be saved can grow very large. This will slow down the
exiting and starting of Pmcomm. If you have the Extended Scroll size set to 1
megabyte, then once the Extended Scroll back buffer fills up, 1 megabyte will
have to be read and written each time you run Pmcomm.


ΓòÉΓòÉΓòÉ 10.10.6. Extended Scroll Size ΓòÉΓòÉΓòÉ

The Extended Scroll Size options allows you to set the maximum size of the
buffer that Pmcomm will use to store the extended scroll information into. When
this buffer fills up Pmcomm will delete the oldest information, to allow room
for new information. Pmcomm will only allocate memory as it is needed to store
the scroll information, and it will not allocate more memory then is set in the
Extended Scroll Size option. If the size is set to 0 then Pmcomm will not use
the Extended Scroll buffer.


ΓòÉΓòÉΓòÉ 10.10.7. German Umlaut Filter ΓòÉΓòÉΓòÉ

This feature will display some special characters that appear in the German
language. The translations are as follows:

^U  =  @

 О  =  [

 Щ  =  \

 Ъ  =  ]

 Д  =  {

 Ф  =  |

 Б  =  }

 с  =  ~


ΓòÉΓòÉΓòÉ 10.10.8. Hide Window While Dialing ΓòÉΓòÉΓòÉ

The hide window while dialing option will make the screen less "busy" while
dialing.


ΓòÉΓòÉΓòÉ 10.10.9. Hide Window During a File Transfer ΓòÉΓòÉΓòÉ

The hide window during a file transfer option will make the screen less "busy"
while executing a file transfer. If you use the show button on the file
transfer dialog box, the main window will reappear.


ΓòÉΓòÉΓòÉ 10.10.10. Automatic Vertical Scroll ΓòÉΓòÉΓòÉ

The Automatic vertical scroll option will make Pmcomm keep the cursor
vertically in the Pmcomm window.


ΓòÉΓòÉΓòÉ 10.10.11. Automatic Horizontal Scroll ΓòÉΓòÉΓòÉ

The Automatic horizontal scroll option will keep the cursor horizontally in the
Pmcomm window.


ΓòÉΓòÉΓòÉ 10.10.12. Retain Dialing Dialog's Position ΓòÉΓòÉΓòÉ

The retain dialing dialog's position option will make Pmcomm restore the last
position of the dialing dialog each time it is invoked. If this option is not
selected then OS/2 will decide where to place the dialog boxes.


ΓòÉΓòÉΓòÉ 10.10.13. Retain Transfer Dialog's Position ΓòÉΓòÉΓòÉ

The retain transfer dialog's position option will make Pmcomm restore the last
position of the transfer dialog each time it is invoked. If this option is not
selected then OS/2 will decide where to place the dialog boxes.


ΓòÉΓòÉΓòÉ 10.10.14. Show Dial Message Box ΓòÉΓòÉΓòÉ

The Show Dial Message Box option makes Pmcomm display a message box and beeps
at the user, when Pmcomm obtains a remote connection, until the OK button is
pressed. This will make sure you notice that Pmcomm has a remote connection.


ΓòÉΓòÉΓòÉ 10.10.15. Local Echo On ΓòÉΓòÉΓòÉ

The local echo on option will make Pmcomm echo all keystrokes to the local
screen as well as to the remote computer.


ΓòÉΓòÉΓòÉ 10.10.16. Turn Sound On ΓòÉΓòÉΓòÉ

The turn sound on option will make Pmcomm alert the user when certain functions
have been completed. The sound must also be turned on in OS/2 for this option
to work. In the System Setup object in the OS/2 System folder there is an
object labeled Sound. Make sure the Warning Beep box is checked.


ΓòÉΓòÉΓòÉ 10.11. Status Line ΓòÉΓòÉΓòÉ

This option will activate Pmcomm's Status Line. The Status Line shows the time
connected to a remote computer and the terminal type. If the mouse cursor is
moved over the top of a button on the button bar, the Status Line also shows a
brief description of the button. If the mouse cursor is moved over the top of
the port button, the current port statistics are displayed on the Status Line.

The elapsed timer starts as soon as you are connected to another computer. The
timer displays the elapsed time in hours and minutes. You may also set two
warning levels. The first will change the connect time to yellow and the second
level will turn the connect time red. These warning levels are useful to keep
track of how of the time you are connected to a remote computer.


ΓòÉΓòÉΓòÉ 10.11.1. Show Status Line ΓòÉΓòÉΓòÉ

The "Show status line" option will display Pmcomm's Status Line at the bottom
of the Pmcomm window. For more information see Status_Line.


ΓòÉΓòÉΓòÉ 10.11.2. Connect time for first warning ΓòÉΓòÉΓòÉ

After the amount of time specified in this option expires, Pmcomm will turn the
connect time yellow. The time must be specified in the hh:mm format.


ΓòÉΓòÉΓòÉ 10.11.3. Connect time for second warning ΓòÉΓòÉΓòÉ

After the amount of time specified in this option expires, Pmcomm will turn the
connect time red. The time must be specified in the hh:mm format.


ΓòÉΓòÉΓòÉ 10.12. File Open ΓòÉΓòÉΓòÉ

Pmcomm uses the standard OS/2 file open dialog, when the user needs to open an
existing file. When multiple files can be opened (such as when doing batch
uploads), Pmcomm allows the user to select multiple files. If a user types in a
file name with wild cards, such as *.cmd, then all the files that end with a
cmd extension will be displayed in the File list box. A user may also type in
the file name directly, instead of selecting the file with the mouse.

Different disk drives may be selected with the drive combo box, and different
directories can be selected using the directory list box. Pmcomm will display
either the Pmcomm working directory, or the script directory (if starting a
script), or the upload directory (if uploading or importing a file). If a user
uploads a file from other then the upload directory, the next time (as long as
Pmcomm is not closed) the user uploads a file Pmcomm will display that
directory. The same thing works when starting scripts.


ΓòÉΓòÉΓòÉ 10.13. Terminal ΓòÉΓòÉΓòÉ

Terminal allows you to select which emulation you wish to use. There are also
some options for the different emulations.


ΓòÉΓòÉΓòÉ 10.13.1. Default Key Map ΓòÉΓòÉΓòÉ

The default key map combination box allows you to select a different default
key map for each terminal emulation. This key map may be overridden by a key
map that is selected in the dialing directory. If you wish to create a new key
map, just type in the name of the key map you wish to create (key map's must
have a .map extension). If you wish to use an existing key map just select it
from the drop down list box.


ΓòÉΓòÉΓòÉ 10.13.2. TTY emulation ΓòÉΓòÉΓòÉ

The TTY emulation makes Pmcomm act as a teletype device. Generally this is the
least used emulation, however, it is also the fastest. The reason for this is
that there are very few special commands that Pmcomm has to process. None of
the special ANSI control codes are processed.


ΓòÉΓòÉΓòÉ 10.13.3. ANSI emulation ΓòÉΓòÉΓòÉ

The ANSI emulation is probably the most used. It will execute the special ANSI
screen control commands. This allows the remote program to be able to clear the
screen, position the cursor and change the colors. There are other screen
control commands but these are the most commonly used ones. There are also
options to have Pmcomm ignore the ANSI color changes so that you can use the
colors you want, instead of the ones the remote computer uses, and to send the
ANSI cursor position commands with the arrow keys. When using the ANSI
emulation you can also have Pmcomm strip off the ANSI commands before saving
the information into a capture file. This will make the capture file much more
readable. You can also change the length of the page, to correspond to the size
of your screen. The default for the ANSI page length is 25 lines, and under
most cases should be left there.


ΓòÉΓòÉΓòÉ 10.13.4. VT100 and VT220 emulation ΓòÉΓòÉΓòÉ

In VT100 and VT220 emulation, some keys have been changed to try to more
closely emulate the VT100 keyboard. F1-F4 are now the PF keys. Because of this
the F1 key will not display the normal help and F3 will not exit the program.
The PF keys will send the following characters:

  F1 = ESCOP

  F2 = ESCOQ

  F3 = ESCOR

  F4 = ESCOS

Where ESC is equal to the ASCII character hex 1B. All other hot keys will not
be available. When the num lock key is off, the numerical key pad will be in
the application mode. If you are connecting to a VT220 Host you can use these
keys to send the VT220 PF key values. For example pressing the 1 on the numeric
key pad will send the VT220 PF1 key. Pressing the 3 on the numeric key pad will
send the VT220 PF3 key, and so on. With the num lock on the numbers will be
sent. The plus key has been re-mapped to be a comma, again to be compatible
with the VT100 keyboard. In most cases it is best to tell the host that you are
a VT220 terminal. The VT100 emulation of Pmcomm supports most of the VT220
commands, and will allow you to use the extra support that VT220 allows. If you
tell the host that you are a VT220 terminal, for example, you will be able to
use the Ctrl-R for reset and the Ctrl-C for clear. These are just a couple of
examples of the additional benefit that you can get from VT220.

The VT page length allows you to set Pmcomm to support different number of
rows, when using VT100 or VT220 terminal emulations. The default is 25 rows,
but on most UNIX host systems you can change the host default by using the stty
command. For example to set the number of rows on a UNIX host to 43 rows, you
would issue this command, stty rows 43. You would also have to set the VT page
length in Pmcomm to 43.

The send DEL for backspace option is the default for many VT100 keyboards. When
this is selected, Pmcomm will send a hex 7f character instead of the backspace
character. You can still send a backspace character by pressing Ctrl-Backspace.
This allows you to have both these characters available at one time.

The translate CR/LF for LF option will act as if it received a carriage return
and a line feed, each time it receives a line feed.

The line wrap option will make Pmcomm wrap the line if the line is longer than
the page width. If this option is off the line will be truncated.

The Insert mode option will allow you to insert characters into the middle of a
line and the rest of the line will be shifted to the right to allow room for
the new characters.

The cursor visible option determines if the cursor will be shown on the screen
or not.

The Screen origin relative option determines if Pmcomm will keep everything on
a 25 line screen or allow it to use the scroll back buffer. In most cases this
option should be selected.

The last two options are to set the width of the screen. Either 80 or 132
columns are supported.

Most of these options can be changed from the host. The default setup should
work for most applications, and the host can change the options to meet
different needs.


ΓòÉΓòÉΓòÉ 10.14. Multimedia ΓòÉΓòÉΓòÉ

The Multimedia setup allows you to have Pmcomm play Multimedia files during
certain events. The files can be any Multimedia file supported by OS/2,
including video. The playing of the file can be stopped at anytime, by
selecting Stop Wave, from the menu. The Stop Wave can also be re-mapped to any
key.


ΓòÉΓòÉΓòÉ 10.14.1. Incoming Beep ΓòÉΓòÉΓòÉ

This file will be played when the remote computer sends a beep (ASCII 7). This
will be done with any of the terminal emulations. The file listed must be the
full path name including the file name, and can be any OS/2 supported
Multimedia file.


ΓòÉΓòÉΓòÉ 10.14.2. Connect ΓòÉΓòÉΓòÉ

This file will be played when a connection has been established through the
dialing directory. The file listed must be the full path name including the
file name, and can be any OS/2 supported Multimedia file.


ΓòÉΓòÉΓòÉ 10.14.3. No DCD ΓòÉΓòÉΓòÉ

This file will be played when your modem reports that DCD (Data Carrier Detect)
has been droped. Monitor DCD must be selected under Options, Port, inorder for
this file to be played. The file listed must be the full path name including
the file name, and can be any OS/2 supported Multimedia file.


ΓòÉΓòÉΓòÉ 10.14.4. Busy ΓòÉΓòÉΓòÉ

This file will be played when your modem reports a BUSY signal.The file listed
must be the full path name including the file name, and can be any OS/2
supported Multimedia file.


ΓòÉΓòÉΓòÉ 10.14.5. Transfer Complete ΓòÉΓòÉΓòÉ

This file will be played when Pmcomm has sucessfully complete a file transfer.
The file listed must be the full path name including the file name, and can be
any OS/2 supported Multimedia file.


ΓòÉΓòÉΓòÉ 10.14.6. Transfer Aborted ΓòÉΓòÉΓòÉ

This file will be played when a file transfer has been aborted. The file listed
must be the full path name including the file name, and can be any OS/2
supported Multimedia file.


ΓòÉΓòÉΓòÉ 10.15. Chat ΓòÉΓòÉΓòÉ

This sets up Pmcomm to "chat" when connected to another computer that is also
running Pmcomm. This mode automatically sets Pmcomm to echo characters locally
and to send a carriage return line feed combination when the enter key is
pressed.


ΓòÉΓòÉΓòÉ 11. Macros ΓòÉΓòÉΓòÉ

Allows you to pick, with a mouse, the macro you wish to send. Can also be
selected with an Alt+corresponding number keystroke. Pmcomm allows you to set
up ten different macros. Scripts can be executed from macros by using the shell
command. An example of this would be:

shell("c:\pmcomm\plane.cmd");

This would execute the REXX script called plane.cmd. This allows you a quick
and easy way to execute your most popular scripts.

Multimedia files can be played from a macro as well, with the play_wave
command. The play_wave command will play any file that is supported by OS/2.
This includes wav, mid, and avi file formats. The syntax for this command is :

play_wave("c:\mmos2\sounds\bach.mid");


ΓòÉΓòÉΓòÉ 12. Script Syntax ΓòÉΓòÉΓòÉ

Both, internal and REXX, syntaxes are described in this section.


ΓòÉΓòÉΓòÉ 12.1. REXX Functions ΓòÉΓòÉΓòÉ

This describes the function calls that are available in the rxpmcomm.dll.
Before using any of these calls you must include these lines in your REXX
program:

Call RxFuncadd " init_dll ","RxPmcomm","init_dll"

Parse arg port portname screen_handle dde_output dde_input semaphore

Call init_dll

The rxpmcomm.dll must reside in a directory listed in your LIBPATH statement in
config.sys. One of the default directories is \os2\dll. If you are using OS/2
2.0 or later, then you can use the init_32dll, which is in the RxPmc32.dll.
This is a 32 bit dll, which will use less memory and maybe faster in some
cases. These functions are designed to make it easier to preform tasks
necessary when writing scripts for asynch communications. To invoke a REXX
program from a script, use the shell( ) function in the script. The format of
the shell function is as follows:

shell("\path\filename.cmd");
where filename.cmd is your REXX program. These functions have been tested with
the REXX that comes with OS/2 1.3 and 2.0, but should work with any totally
function compatible REXX. There are some sample REXX programs included.


ΓòÉΓòÉΓòÉ 12.1.1. init_dll ΓòÉΓòÉΓòÉ

The init_dll function will register the functions in the rxpmcomm.dll, with
REXX. This function must be called before any other rxpmcomm.dll function is
called. The RxFuncadd must be called before init_dll to register this function
with REXX.


ΓòÉΓòÉΓòÉ 12.1.2. init_32dll ΓòÉΓòÉΓòÉ

The init_32dll function will register the functions in the rxpmc32.dll, with
REXX. This function must be called before any other rxpmc32.dll function is
called. The RxFuncadd must be called before init_32dll to register this
function with REXX. The rxpmc32.dll and the init_32dll function can only be
used with OS/2 2.0 and later.


ΓòÉΓòÉΓòÉ 12.1.3. os2_shell ΓòÉΓòÉΓòÉ

os2_shell port,port

Example

Call os2_shell port,port

Description

This command will allow a caller to shell to OS/2, remotely. The first
parameter is the input handle and the second is the output handle. In the
example above, the command will receive and send the information to the
communication port.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.4. set_download_path ΓòÉΓòÉΓòÉ

set_download_path directory,dde_output

Example

Call set_download_path "c:\pmcomm",dde_output

Description

The above example will set the download path to c:\pmcomm. This will store all
of the files received in that directory. The dde_output, is the dde_output
value passed on the command line.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.5. setcom ΓòÉΓòÉΓòÉ

setcom baud,parity,data_bit,stop_bits,port

Example

Call setcom "2400","N","8","1",port

Description

This would set the communication port to 2400 baud, no parity, 8 data bits, 1
stop bit. Baud can be from 300 to 19200 with the standard OS/2 device driver.
Parity can be N(none), O(odd), E(even), M(marked), or S(spaced). Data bits can
be 5, 6, 7 or 8. Stop bits can be 1 or 2 (2 can only be used with 5 data bits).
If a parameter is an empty string (i.e. setcom "","E","7","1",port) this leaves
the baud at the current rate but set the line characteristics to 7, Even, 1.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.6. sendb ΓòÉΓòÉΓòÉ

sendb length,port

Example

Call sendb "300",port

Description

This call sends a break signal a certain time in milliseconds. The above
example would send a break signal for 300 milliseconds. This call is mostly
used to establish direct connects (not using a modem). Three hundred
milliseconds should be okay for most situations.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.7. dcd ΓòÉΓòÉΓòÉ

dcd port

Example

Call dcd port

Description

This call checks to see if there is a carrier detected on the modem. You can
use this to see if Pmcomm is still online to a remote computer. For this
information to be correct the modem must support dcd and the modem must be
configured to support dcd. To find the command refer to your owner's manual.

Returns

1 if carrier detected and 0 if no carrier.


ΓòÉΓòÉΓòÉ 12.1.8. char_avail ΓòÉΓòÉΓòÉ

char_avail port

Example

Call char_avail port

Description

This call checks to see how many characters are available in the device
driver's receive buffer. You can use this function to check to see if the
device driver has received any characters from the communication port.

Returns

Number of characters in device driver receive queue.


ΓòÉΓòÉΓòÉ 12.1.9. read_timeout ΓòÉΓòÉΓòÉ

read_timeout timeout,port

Example

Call read_timeout 20000,port

Description

This call sets the length of time (in milliseconds) that wait_for, wait_fore,
Get_ch will wait for a character from the communication port. The above example
will make the functions wait for 20 seconds.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.10. Get_ch ΓòÉΓòÉΓòÉ

Get_ch port

Example

Call Get_ch port

Description

This call will get a character from the communication port. If no character is
available by the time set with read_timeout the function will return with a
value of -1. Otherwise the function will return with the character read.

Returns

char value if successful and -1 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.11. ring_detect ΓòÉΓòÉΓòÉ

ring_detect port

Example

Call ring_detect port

Description

This call can be used to inform a program if the phone is ringing.

Returns

1 if ring detected, 0 if no ring, and 2 if invalid number of parameters.


ΓòÉΓòÉΓòÉ 12.1.12. drop_dtr ΓòÉΓòÉΓòÉ

drop_dtr port

Example

Call drop_dtr port

Description

This call is usually used to make a modem hang up. The modem must be configured
to allow this. To find the command for your modem, check your owner's manual.
Dtr needs to be dropped for about 2-3 seconds to make sure the modem sees the
drop in DTR. After that length of time raise_dtr can be called to bring DTR
back up. On a Hayes 2400 the above command will also keep the modem from doing
an auto answer until you raise_dtr again.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.13. raise_dtr ΓòÉΓòÉΓòÉ

raise_dtr port

Example

Call raise_dtr port

Description This call is usually used after drop_dtr to allow the modem to
process commands and enable it to answer the phone.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.14. Wait_for (REXX) ΓòÉΓòÉΓòÉ

Wait_for string,string,string...,port

Example

Call Wait_for "first name?","last name?",port

Description

The above example would wait for either first name?, or last name?, from the
communication port. The function will return the index of the string that
matched. For example if the Wait_for received last name?, then the result would
be 2. You can specify any number of strings depending on memory available.

Returns

Index of matched string or zero if timeout or error.


ΓòÉΓòÉΓòÉ 12.1.15. Wait_fore ΓòÉΓòÉΓòÉ

Wait_fore string,string,string...,port,screen_handle

Example

Call Wait_fore "first name?","last name?",port,screen_handle

Call Wait_fore "first name?",port,1

Call Wait_fore "first name?","raw",port,1

Description

The first example would wait for either first name?, or last name?, from the
communication port and echo the out_put to the Pmcomm screen. The second
example would do the same except it would write the out put to StdOut(value 1)
which would be the REXX screen. The third example would look for an exact match
coming across the communication port, including any ANSI sequences.

Returns

Index of matched string or zero if timeout or error.


ΓòÉΓòÉΓòÉ 12.1.16. Put_s ΓòÉΓòÉΓòÉ

Put_s string,port

Example

Call Put_s "first name",port

Description

This call will send string out to port. In the above example first name will be
sent to the communication port. If port is not specified then 'string' will be
sent to the REXX screen. If screen_handle is specified instead of port then the
string will be sent to the Pmcomm screen.

Returns

Length of string actually written.


ΓòÉΓòÉΓòÉ 12.1.17. Sleep (REXX) ΓòÉΓòÉΓòÉ

Sleep time

Example

Call Sleep "1000"

Description

This call will delay the program for the amount of milliseconds specified. The
above example will delay the computer for one second.

Returns

Unconditionally 0.


ΓòÉΓòÉΓòÉ 12.1.18. beep ΓòÉΓòÉΓòÉ

beep frequency,duration

Example

Call beep 495,100

Description

The above example will beep the speaker.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.19. get_cursor_position ΓòÉΓòÉΓòÉ

get_cursor_position axis,dde_output,dde_input

Example

Call get_cursor_position "column",dde_output,dde_input

Description

The above will return the column that the cursor is in. To get the current row,
you would issue this call with "row" instead of "column". The row value that is
returned is relative to the top of the scroll back buffer. The top row of the
scroll back buffer and the first column would be 0,0.

Returns

Cursor position.


ΓòÉΓòÉΓòÉ 12.1.20. get_char_at ΓòÉΓòÉΓòÉ

get_char_at row,column,number,dde_output,dde_input

Example

Call get_char_at 0,0,80,dde_output,dde_input

Description

The above will return the characters at the first line of the scroll back
buffer. It will return 80 characters, even if the characters are spaces. The
maximum number of characters that can be returned at one time is 200.

Returns

Character(s) at the specified row and column.


ΓòÉΓòÉΓòÉ 12.1.21. REXX capture_on ΓòÉΓòÉΓòÉ

capture_on filename,dde_output,dde_input

Example

Call capture_on "c:\pmcomm\cap.txt", dde_output, dde_input

Description

The above will turn capture on so that everything will be saved into a file. If
you have strip ANSI configured in Pmcomm then the text only will be saved in
ANSI, VT100, and VT220 terminal emulations. If the file already exists it will
be overwritten.

Returns

1 if successful and 0 if not.


ΓòÉΓòÉΓòÉ 12.1.22. REXX capture_off ΓòÉΓòÉΓòÉ

capture_off dde_output,dde_input

Example

Call capture_off dde_output,dde_input

Description

The above will turn capture off. The capture may have been started from a
script or from the menu.

Returns

1 if successful and 0 if not.


ΓòÉΓòÉΓòÉ 12.1.23. REXX change_option ΓòÉΓòÉΓòÉ

change_option "option",dde_output,dde_input

This command will allow a script to change certain options in Pmcomm. The
options that can be changed are:

device. This option will allow you to change the current device that Pmcomm is
using. For example to change the current device to COM2, the syntax would be:
Call change_option "device=COM2",dde_output,dde_input

hardware. This option will allow you to turn hardware flow control on or off.
If you want to turn hardware flow control off the syntax would be: Call
change_option "hardware=OFF",dde_output,dde_input To turn hardware flow control
on you would replace the OFF with ON.

XON/XOFF. This option will allow you to turn Xon/Xoff flow control on or off.
If you want to turn Xon/Xoff flow control off the syntax would be: Call
change_option "XON/XOFF=OFF",dde_output,dde_input

To turn Xon/Xoff flow control on you would replace the OFF with ON.

dtr. If this option is turned on the DTR will be lowered when hangup is
selected. If you want to turn this option off the syntax would be: Call
change_option "dtr=OFF",dde_output,dde_input

stop bits. This option will allow you to set the number of stop bits that the
communication port is set to. The communication port will be changed before the
command is completed, and the default stop bits will be set to the new value.
To set the communication port to 1 stop bit, the syntax would be: Call
change_option "stop bits=1",dde_output,dde_input

The communication port can only be set to 1 or 2 stop bits from a script.

data bits. This option will allow you to set the number of data bits that the
communication port is set to. The communication port will be changed before the
command is completed, and the default data bits will be set to the new value.
To set the communication port to 8 data bits, the syntax would be: Call
change_option "data bits=8",dde_output,dde_input

The communication port can be set to 8, 7, 6 or 5 data bits.

parity. This option will allow you to set the parity for the current
communication port. The communication port will be changed before the command
is completed, and the default parity will be set to the new value. To set the
communication port to Even parity, the syntax would be: Call change_option
"parity=Even",dde_output,dde_input

The communication port can be set to None, Even , Odd, Mark or Space parity.

initialization string. This option allows you to change the modem
initialization string that Pmcomm uses. To change the string the syntax would
be: Call change_option "initialization string=ATZ",dde_output,dde_input

dial timeout. This option will allow you to set the number of seconds that
Pmcomm will wait when dialing a remote computer. If you wanted to set the
number of seconds to 60 the syntax for the command would be: Call change_option
"dial timeout=60",dde_output,dde_input

redial delay. This option will allow you to set the number of seconds that
Pmcomm will wait between dialing attempts. If you wanted to set the number of
seconds to 6 the syntax for the command would be: Call change_option "redial
delay=6",dde_output,dde_input

hangup string. This option allows you to change the modem hangup string that
Pmcomm uses. To change the string the syntax would be: Call change_option
"hangup string=+++~~~ATH^M",dde_output,dde_input

auto zmodem string. Some host systems do not send a standard auto zmodem
string. This command allows you to change the string that Pmcomm looks for,
when the host starts a zmodem send file transfer. When Pmcomm finds a match it
will start a zmodem receive file transfer. To change the auto zmodem string the
syntax would be:

Call change_option "auto zmodem string=B00000",dde_output,dde_input

zmodem date. This option allows you turn on and off whether Pmcomm will compare
the file dates during a zmodem resume file transfer. The syntax to turn the
date compare off would be:

Call change_option "zmodem date=OFF",dde_output,dde_input To turn this option
on you would replace the OFF with ON.

zmodem rename. This option allows you turn on and off whether Pmcomm will
rename duplicate files, if a resume fails (or is turned off). If this option is
on Pmcomm will rename the new file with a number for an extension. The syntax
to turn the zmodem rename off would be:

Call change_option "zmodem rename=OFF",dde_output,dde_input To turn this option
on you would replace the OFF with ON.

auto zmodem. This option will allow you to turn the auto zmodem feature on or
off. If you want to turn auto zmodem off the syntax would be: Call
change_option "auto zmodem=OFF",dde_output,dde_input To turn auto zmodem on you
would replace the OFF with ON.

zmodem recovery. This option will allow you to turn the zmodem recovery feature
on or off. If you want to turn zmodem recovery off the syntax would be: Call
change_option "zmodem recovery=OFF",dde_output,dde_input To turn zmodem
recovery on you would replace the OFF with ON.

zmodem crc. This option allows you to select either the 32 bit or 16 bit zmodem
CRC error detection option. To select the 32 bit option the syntax would be:
Call change_option "zmodem crc=32",dde_output,dde_input

download directory. To change the current download directory the syntax would
be: Call change_option "download directory=c:\pmcomm\",dde_output,dde_input

hide dial. This option allows you to select if the main terminal window is
hidden while Pmcomm is dialing a remote computer. To allow the main window to
remain visible while dialing the syntax would be: Call change_option "hide
dial=OFF",dde_output,dde_input To turn hide dial on you would replace the OFF
with ON.

hide transfer. This option allows you to select if the main terminal window is
hidden while Pmcomm is doing a file transfer. To allow the main window to
remain visible while doing file transfers the syntax would be: Call
change_option "hide transfer=OFF",dde_output,dde_input To turn hide transfer on
you would replace the OFF with ON.

auto vertical. This option determines if Pmcomm will automatically scroll the
terminal window vertically to keep the current cursor position in the window.
To turn this option off the syntax would be: Call change_option "auto
vertical=OFF",dde_output,dde_input To turn this option on you would replace the
OFF with ON.

auto horizontal. This option determines if Pmcomm will automatically scroll the
terminal window horizontally to keep the current cursor position in the window.
To turn this option off the syntax would be: Call change_option "auto
horizontal=OFF",dde_output,dde_input To turn this option on you would replace
the OFF with ON.

save dial. If this option is on then Pmcomm will store the position of the
dialing dialog box, and use it the next time a number is dialed. To turn this
option off the syntax would be: Call change_option("save
dial=OFF",dde_output,dde_input To turn this option on you would replace the OFF
with ON.

save transfer. If this option is on then Pmcomm will store the position of the
transfer dialog box, and use it the next time a file is transferred dialed. To
turn this option off the syntax would be: Call change_option "save
transfer=OFF",dde_output,dde_input To turn this option on you would replace the
OFF with ON.

sound. This option allows you to turn the warning beeps in Pmcomm, on or off.
To turn this option off the syntax would be: Call change_option
"sound=OFF",dde_output,dde_input To turn this option on you would replace the
OFF with ON.

monitor dcd. If this option is on, then Pmcomm will monitor the presence of
data carrier detect (DCD). To turn this option off the syntax would be: Call
change_option "monitor dcd=OFF",dde_output,dde_input To turn this option on you
would replace the OFF with ON.

page length. This option allows you to set the ANSI page length from a script.
Following is an example of how to set the page length to 25 lines. Call
change_option "page length=25",dde_output,dde_input

terminal. This option allows you to change the type of terminal from within a
Pmcomm script. The following example would set the terminal type to ANSI. Call
change_option "terminal=ANSI",dde_output,dde_input The available valid terminal
types are TTY, ANSI, VT100 or VT220.

foreground. This option allows you to change the foreground color from within a
Pmcomm script. The available colors are:

black
blue
green
cyan
red
magenta
brown
white
dark grey
light blue
light green
light cyan
light red
pink
yellow
bright white

The syntax to change the foreground color to cyan would be: Call change_option
"foreground=cyan",dde_output,dde_input

background. This option allows you to change the background color from within a
Pmcomm script. The available colors are:

black
blue
green
cyan
red
magenta
brown
white
dark grey
light blue
light green
light cyan
light red
pink
yellow
bright white

The syntax to change the background color to black would be: Call change_option
"background=black",dde_output,dde_input

echo. This option allows you turn on and off the local keystroke echo. The
syntax to turn echo off would be: Call change_option
"echo=OFF",dde_output,dde_input To turn this option on you would replace the
OFF with ON.

prefix1
prefix2
prefix3

 These options allow you to change the dialing prefixes. For example to change
prefix1 you would use the following syntax: Call change_option
"prefix1=ATDT",dde_output,dde_input

suffix1
suffix2
suffix3

 These options allow you to change the dialing suffixes. For example to change
suffix1 you would use the following syntax: Call change_option
"suffix1=^M",dde_output,dde_input

strip ansi. This option allows you to select if Pmcomm will strip the ANSI
commands from a capture file. The syntax to turn off the stripping of the ANSI
commands would be: Call change_option "strip ansi=OFF",dde_output,dde_input To
turn this option on you would replace the OFF with ON.

macro1
macro2
macro3
macro4
macro5
macro6
macro7
macro8
macro9
macro10

These options allow you to change the keyboard macros. For example to change
macro1 you would use the following syntax: Call change_option
"macro1=ATZ",dde_output,dde_input

phone directory.

phone directory. To change the current phone directory the syntax would be:
Call change_option "phone directory=c:\pmcomm\pmcomm.fon",dde_output,dde_input
This would change the file used as the Pmcomm phone file.

script directory. To change the current script directory the syntax would be:
Call change_option "script directory=c:\pmcomm\script",dde_output,dde_input

capture directory. To change the current capture file directory the syntax
would be: Call change_option "capture
directory=c:\pmcomm\capture",dde_output,dde_input

chat. This option allows you to turn the Pmcomm chat mode on or off. The syntax
to turn off chat mode is: Call change_option "chat=OFF",dde_output,dde_input To
turn this option on you would replace the OFF with ON.

auto cisb. This option allows you to turn the automatic CISB file transfer on
or off. The syntax to turn off auto CISB is: Call change_option "auto
cisb=OFF",dde_output,dde_input To turn this option on you would replace the OFF
with ON.

cisb recovery. This option allows you to turn the CISB file recovery on or off.
The syntax to turn off the CISB file recovery is: Call change_option "cisb
recovery=OFF",dde_output,dde_input To turn this option on you would replace the
OFF with ON.

baud. This option allows you to change the current baud rate. This will also
change the default baud rate saved in the setup file. The syntax for this
command is: Call change_option "baud=19200",dde_output,dde_input

startup script. Use this command to change the name of the script that will be
executed upon startup of Pmcomm. The syntax of this command is:
change_option("startup script=c:\pmcomm\startup.scr");

exit on hangup. This command allows you to have Pmcomm exit once data carrier
detect (DCD) has dropped. This will only work correctly if Monitor DCD is also
selected. The syntax for this command is: Call change_option "exit on
hangup=ON",dde_output,dde_input

working directory. To change the current working directory the syntax would be:
Call change_option "working directory=c:\pmcomm",dde_output,dde_input

scroll size. This command allows you to change the size of the Extended Scroll
Back buffer. To change the scroll size the syntax would be:

Call change_option "scroll size=65535",dde_output,dde_input

keymap. The keymap must be in the working directory of Pmcomm. To change the
keymap currently in use the syntax would be : Call change_option
"keymap=ansi.map",dde_output,dde_input

prompt on hangup. This command will turn on or off the prompt on hangup option.
To turn this option on the syntax would be : Call change_option "prompt on
hangup=ON",dde_output,dde_input

prompt to save screen size. This command will turn on or off the prompt to save
screen size option. To turn this option on the syntax would be : Call
change_option "prompt to save screen size=ON",dde_output,dde_input

prompt to save setup. This command will turn on or off the prompt to save setup
option. To turn this option on the syntax would be : Call change_option "prompt
to save setup=ON",dde_output,dde_input

prompt on capture. This command will turn on or off the prompt on capture
option. To turn this option on the syntax would be : Call change_option "prompt
on captue=ON",dde_output,dde_input

close device. This command will turn on or off the option to close the Port
Device when it is not in use. To turn this option on the syntax would be : Call
change_option "close device=ON",dde_output,dde_input


ΓòÉΓòÉΓòÉ 12.1.24. REXX dial ΓòÉΓòÉΓòÉ

dial "name",dde_output,dde_input

This command will allow a script to dial a number listed in the current Pmcomm
dialing directory. To dial the entry call Compu-Plane you would use the
following syntax: Call dial "Compu-Plane",dde_output,dde_input

This command returns the baud rate of the connection or a 0 if there was no
connection. One way that a zero could be returned is if the cancel button on
the dialing dialog was pushed. If the REXX dial command returns a 0 you can use
the REXX exit function to cancel the script.


ΓòÉΓòÉΓòÉ 12.1.25. REXX get_dial_memo ΓòÉΓòÉΓòÉ

get_dial_memo dde_output,dde_input

This command will retrieve the information stored in the memo field of the
currently connected phone number. This will allow you to, for example, store
your password in the dialing directory memo field, and write a script to use
it. By doing this you can change your password without editing the script. All
you would have to do is change the text in the memo field for that number. To
retrieve the text stored in the current memo field the syntax would be: Call
get_dial_memo dde_output,dde_input


ΓòÉΓòÉΓòÉ 12.1.26. REXX clipboard_paste ΓòÉΓòÉΓòÉ

clipboard_paste dde_output,dde_input

This command will retrieve text stored in the OS/2 clipboard. The maximum
amount of text that can be retrieved at one time is 8192 bytes. To retrieve the
text stored in the clipboard the syntax would be: Call clipboard_paste
dde_output,dde_input


ΓòÉΓòÉΓòÉ 12.1.27. REXX clipboard_copy ΓòÉΓòÉΓòÉ

clipboard_copy dde_output,dde_input

This command will copy text to the OS/2 clipboard. The maximum amount of text
that can be sent at one time is 8192 bytes. To send text to the clipboard the
syntax would be: Call clipboard_copy "This is a test", dde_output,dde_input


ΓòÉΓòÉΓòÉ 12.1.28. REXX clipboard_append ΓòÉΓòÉΓòÉ

clipboard_append dde_output,dde_input

This command will append text to the existing text in the OS/2 clipboard. The
maximum amount of text that can be sent at one time is 8192 bytes. To append
text to the clipboard the syntax would be: Call clipboard_append "This is a
test", dde_output,dde_input


ΓòÉΓòÉΓòÉ 12.1.29. xmodem_send ΓòÉΓòÉΓòÉ

xmodem_send filename,dde_output,dde_input

Example

Call xmodem_send "filename.ext",dde_output,dde_input

Description

This call will invoke the Xmodem_CRC send routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
uploading from the menu.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.30. xmodem_receive ΓòÉΓòÉΓòÉ

xmodem_receive filename,dde_output,dde_input

Example

Call xmodem_receive "filename.ext",dde_output,dde_input

Description

This call will invoke the Xmodem_CRC receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
downloading from the menu. The file will be downloaded into the download
directory. The file name specified must not include a path.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.31. xmodem_chk_send ΓòÉΓòÉΓòÉ

xmodem_chk_send filename,dde_output,dde_input

Example

Call xmodem_chk_send "filename.ext",dde_output,dde_input

Description

This call will invoke the Xmodem_Checksum send routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
uploading from the menu.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.32. xmodem_chk_receive ΓòÉΓòÉΓòÉ

xmodem_chk_receive filename,dde_output,dde_input

Example

Call xmodem_receive "filename.ext",dde_output,dde_input

Description

This call will invoke the Xmodem_Checksum receive routine, built into Pmcomm.
Once issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
downloading from the menu. The file will be downloaded into the download
directory. The file name specified must not include a path.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.33. xmodem_1k_send ΓòÉΓòÉΓòÉ

xmodem_1k_send filename,dde_output,dde_input

Example

Call xmodem_1k_send "filename.ext",dde_output,dde_input

Description

This call will invoke the 1K-Xmodem send routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
uploading from the menu.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.34. xmodem_1k_receive ΓòÉΓòÉΓòÉ

xmodem_1k_receive filename,dde_output,dde_input

Example

Call xmodem_1k_receive "filename.ext",dde_output,dde_input

Description

This call will invoke the 1K-Xmodem receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
downloading from the menu. The file will be downloaded into the download
directory. The file name specified must not include a path.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.35. ymodem_send ΓòÉΓòÉΓòÉ

ymodem_send filename,dde_output,dde_input

Example

Call ymodem_send "filename.ext",dde_output,dde_input

Description

This call will invoke the Ymodem send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer dialog that it does when uploading from
the menu. You may send multiple files by specifying more than file name.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.36. ymodem_receive ΓòÉΓòÉΓòÉ

ymodem_receive dde_output,dde_input

Example

Call ymodem_receive dde_output,dde_input

Description

This call will invoke the Ymodem receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
downloading from the menu. The file will be downloaded into the download
directory. This one call will receive multiple files. The filenames used are
the ones sent from the remote computer.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.37. ymodemg_send ΓòÉΓòÉΓòÉ

ymodemg_send filename,dde_output,dde_input

Example

Call ymodemg_send "filename.ext",dde_output,dde_input

Description

This call will invoke the Ymodem-g send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer dialog that it does when uploading from
the menu. You may send multiple files by specifying more than file name.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.38. ymodemg_receive ΓòÉΓòÉΓòÉ

ymodemg_receive dde_output,dde_input

Example

Call ymodemg_receive dde_output,dde_input

Description

This call will invoke the Ymodem-g receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
downloading from the menu. The file will be downloaded into the download
directory. This one call will receive multiple files. The filenames used are
the ones sent from the remote computer.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.39. zmodem_send ΓòÉΓòÉΓòÉ

zmodem_send filename,dde_output,dde_input

Example

Call zmodem_send "filename.ext",dde_output,dde_input

Description

This call will invoke the Zmodem send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer dialog that it does when uploading from
the menu. You may send multiple files by specifying more than file name.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.40. zmodem_receive ΓòÉΓòÉΓòÉ

zmodem_receive dde_output,dde_input

Example

Call zmodem_receive dde_output,dde_input

Description

This call will invoke the Zmodem receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
downloading from the menu. The file will be downloaded into the download
directory. This one call will receive multiple files. The filenames used are
the ones sent from the remote computer.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.41. kermit_send ΓòÉΓòÉΓòÉ

kermit_send filename,dde_output,dde_input

Example

Call kermit_send "filename.ext",dde_output,dde_input

Description

This call will invoke the Kermit send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer dialog that it does when uploading from
the menu. You may send multiple files by specifying more than file name.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.42. kermit_receive ΓòÉΓòÉΓòÉ

kermit_receive dde_output,dde_input

Example

Call kermit_receive dde_output,dde_input

Description

This call will invoke the Kermit receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer dialog that it does when
downloading from the menu. The file will be downloaded into the download
directory. This one call will receive multiple files. The filenames used are
the ones sent from the remote computer.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.1.43. ascii_send ΓòÉΓòÉΓòÉ

ascii_send filename,dde_output,dde_input

Example

Call ascii_send "filename.ext",dde_output,dde_input

Description

This call will invoke the ASCII send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer dialog that it does when uploading from
the menu.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.44. ascii_receive ΓòÉΓòÉΓòÉ

ascii_receive filename,dde_output,dde_input

Example

Call ascii_receive "filename.ext",dde_output,dde_input

Description

This call will invoke the ASCII receive routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer dialog that it does when downloading from
the menu. The file will be downloaded into the download directory. The file
name specified must not include a path.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.45. cisb_send ΓòÉΓòÉΓòÉ

cisb_send filename,dde_output,dde_input

Example

Call cisb_send "filename.ext",dde_output,dde_input

Description

This call will invoke the CISB send routine, built into Pmcomm. Once issued the
call will not return until the transfer either finishes or is aborted. Pmcomm
will show the normal transfer dialog that it does when uploading from the menu.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.1.46. cisb_receive ΓòÉΓòÉΓòÉ

cisb_receive filename,dde_output,dde_input

Example

Call cisb_receive "filename.ext",dde_output,dde_input

Description

This call will invoke the CISB receive routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer dialog that it does when downloading from
the menu. The file will be downloaded into the download directory. The file
name specified must not include a path.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.2. Internal Functions ΓòÉΓòÉΓòÉ

These are script functions that are built into Pmcomm.


ΓòÉΓòÉΓòÉ 12.2.1. wait_for (internal) ΓòÉΓòÉΓòÉ

wait_for("string");

This will wait until the word 'string' is received. One use of this is when
logging onto a BBS you can have it wait until prompted for a first name.


ΓòÉΓòÉΓòÉ 12.2.2. puts ΓòÉΓòÉΓòÉ

puts("string");

This will send string to the communication port. The 'C' language special
character '\r','\n','\b',and '\a' can also be used.

The \r means carriage return.

The \n means carriage return and line feed combination.

The \b means backspace.

The \a means alert (Pmcomm will beep).


ΓòÉΓòÉΓòÉ 12.2.3. sleep (internal) ΓòÉΓòÉΓòÉ

sleep(1000);

This will wait for the number of milliseconds specified. In this example it
would sleep for one second.


ΓòÉΓòÉΓòÉ 12.2.4. call ΓòÉΓòÉΓòÉ

call("filename");

This allows you to nest scripts. If you put the name of the script that you
want to execute where it says filename, it will execute that script and then
continue. The limit on number of nested scripts is only by available stack
space.


ΓòÉΓòÉΓòÉ 12.2.5. capture_on ΓòÉΓòÉΓòÉ

capture_on("filename");

Captures all screen output to a file. Replace filename with the name of the
file you want the output written to. The capture file will be automatically
closed when you log off, if you have Monitor_DCD selected.


ΓòÉΓòÉΓòÉ 12.2.6. capture_off ΓòÉΓòÉΓòÉ

capture_off();

Stops screen capture and closes the capture file. You can also close the
capture file from the menu.


ΓòÉΓòÉΓòÉ 12.2.7. change_option ΓòÉΓòÉΓòÉ

change_option("option");

This command will allow a script to change certain options in Pmcomm. The
options that can be changed are:

device. This option will allow you to change the current device that Pmcomm is
using. For example to change the current device to COM2, the syntax would be:
change_option("device=COM2");

hardware. This option will allow you to turn hardware flow control on or off.
If you want to turn hardware flow control off the syntax would be:
change_option("hardware=OFF"); To turn hardware flow control on you would
replace the OFF with ON.

XON/XOFF. This option will allow you to turn Xon/Xoff flow control on or off.
If you want to turn Xon/Xoff flow control off the syntax would be:
change_option("XON/XOFF=OFF"); To turn Xon/Xoff flow control on you would
replace the OFF with ON.

dtr. If this option is turned on the DTR will be lowered when hangup is
selected. If you want to turn this option off the syntax would be:
change_option("dtr=OFF");

stop bits. This option will allow you to set the number of stop bits that the
communication port is set to. The communication port will be changed before the
command is completed, and the default stop bits will be set to the new value.
To set the communication port to 1 stop bit, the syntax would be:
change_option("stop bits=1"); The communication port can only be set to 1 or 2
stop bits from a script.

data bits. This option will allow you to set the number of data bits that the
communication port is set to. The communication port will be changed before the
command is completed, and the default data bits will be set to the new value.
To set the communication port to 8 data bits, the syntax would be:
change_option("data bits=8"); The communication port can be set to 8, 7, 6 or 5
data bits.

parity. This option will allow you to set the parity for the current
communication port. The communication port will be changed before the command
is completed, and the default parity will be set to the new value. To set the
communication port to Even parity, the syntax would be:
change_option("parity=Even"); The communication port can be set to None, Even ,
Odd, Mark or Space parity.

initialization string. This option allows you to change the modem
initialization string that Pmcomm uses. To change the string the syntax would
be: change_option("initialization string=ATZ");

dial timeout. This option will allow you to set the number of seconds that
Pmcomm will wait when dialing a remote computer. If you wanted to set the
number of seconds to 60 the syntax for the command would be:
change_option("dial timeout=60");

redial delay. This option will allow you to set the number of seconds that
Pmcomm will wait between dialing attempts. If you wanted to set the number of
seconds to 6 the syntax for the command would be: change_option("redial
delay=6");

hangup string. This option allows you to change the modem hangup string that
Pmcomm uses. To change the string the syntax would be: change_option("hangup
string=+++~~~ATH^M");

auto zmodem string. Some host systems do not send a standard auto zmodem
string. This command allows you to change the string that Pmcomm looks for,
when the host starts a zmodem send file transfer. When Pmcomm finds a match it
will start a zmodem receive file transfer. To change the auto zmodem string the
syntax would be:

change_option("auto zmodem string=B00000");

zmodem date. This option allows you turn on and off whether Pmcomm will compare
the file dates during a zmodem resume file transfer. The syntax to turn the
date compare off would be:

change_option("zmodem date=OFF"); To turn this option on you would replace the
OFF with ON.

zmodem rename. This option allows you turn on and off whether Pmcomm will
rename duplicate files, if a resume fails (or is turned off). If this option is
on Pmcomm will rename the new file with a number for an extension. The syntax
to turn the zmodem rename off would be:

change_option("zmodem rename=OFF"); To turn this option on you would replace
the OFF with ON.

auto zmodem. This option will allow you to turn the auto zmodem feature on or
off. If you want to turn auto zmodem off the syntax would be:
change_option("auto zmodem=OFF"); To turn auto zmodem on you would replace the
OFF with ON.

zmodem recovery. This option will allow you to turn the zmodem recovery feature
on or off. If you want to turn zmodem recovery off the syntax would be:
change_option("zmodem recovery=OFF"); To turn zmodem recovery on you would
replace the OFF with ON.

zmodem crc. This option allows you to select either the 32 bit or 16 bit zmodem
CRC error detection option. To select the 32 bit option the syntax would be:
change_option("zmodem crc=32");

download directory. To change the current download directory the syntax would
be: change_option("download directory=c:\pmcomm\");

hide dial. This option allows you to select if the main terminal window is
hidden while Pmcomm is dialing a remote computer. To allow the main window to
remain visible while dialing the syntax would be: change_option("hide
dial=OFF"); To turn hide dial on you would replace the OFF with ON.

hide transfer. This option allows you to select if the main terminal window is
hidden while Pmcomm is doing a file transfer. To allow the main window to
remain visible while doing file transfers the syntax would be:
change_option("hide transfer=OFF"); To turn hide transfer on you would replace
the OFF with ON.

auto vertical. This option determines if Pmcomm will automatically scroll the
terminal window vertically to keep the current cursor position in the window.
To turn this option off the syntax would be: change_option("auto
vertical=OFF"); To turn this option on you would replace the OFF with ON.

auto horizontal. This option determines if Pmcomm will automatically scroll the
terminal window horizontally to keep the current cursor position in the window.
To turn this option off the syntax would be: change_option("auto
horizontal=OFF"); To turn this option on you would replace the OFF with ON.

save dial. If this option is on then Pmcomm will store the position of the
dialing dialog box, and use it the next time a number is dialed. To turn this
option off the syntax would be: change_option("save dial=OFF"); To turn this
option on you would replace the OFF with ON.

save transfer. If this option is on then Pmcomm will store the position of the
transfer dialog box, and use it the next time a file is transferred dialed. To
turn this option off the syntax would be: change_option("save transfer=OFF");
To turn this option on you would replace the OFF with ON.

sound. This option allows you to turn the warning beeps in Pmcomm, on or off.
To turn this option off the syntax would be: change_option("sound=OFF"); To
turn this option on you would replace the OFF with ON.

monitor dcd. If this option is on, then Pmcomm will monitor the presence of
data carrier detect (DCD). To turn this option off the syntax would be:
change_option("monitor dcd=OFF"); To turn this option on you would replace the
OFF with ON.

page length. This option allows you to set the ANSI page length from a script.
Following is an example of how to set the page length to 25 lines.
change_option("page length=25");

terminal. This option allows you to change the type of terminal from within a
Pmcomm script. The following example would set the terminal type to ANSI.
change_option("terminal=ANSI"); The available valid terminal types are TTY,
ANSI, VT100 or VT220.

foreground. This option allows you to change the foreground color from within a
Pmcomm script. The available colors are:

black
blue
green
cyan
red
magenta
brown
white
dark grey
light blue
light green
light cyan
light red
pink
yellow
bright white

The syntax to change the foreground color to cyan would be:
change_option("foreground=cyan");

background. This option allows you to change the background color from within a
Pmcomm script. The available colors are:

black
blue
green
cyan
red
magenta
brown
white
dark grey
light blue
light green
light cyan
light red
pink
yellow
bright white

The syntax to change the background color to black would be:
change_option("background=black");

echo. This option allows you turn on and off the local keystroke echo. The
syntax to turn echo off would be: change_option("echo=OFF"); To turn this
option on you would replace the OFF with ON.

prefix1
prefix2
prefix3

 These options allow you to change the dialing prefixes. For example to change
prefix1 you would use the following syntax: change_option("prefix1=ATDT");

suffix1
suffix2
suffix3

 These options allow you to change the dialing suffixes. For example to change
suffix1 you would use the following syntax: change_option("suffix1=^M");

strip ansi. This option allows you to select if Pmcomm will strip the ANSI
commands from a capture file. The syntax to turn off the stripping of the ANSI
commands would be: change_option("strip ansi=OFF"); To turn this option on you
would replace the OFF with ON.

macro1
macro2
macro3
macro4
macro5
macro6
macro7
macro8
macro9
macro10

These options allow you to change the keyboard macros. For example to change
macro1 you would use the following syntax: change_option("macro1=ATZ");

phone directory. To change the current phone directory the syntax would be:
change_option("phone directory=c:\pmcomm\pmcomm.fon"); This would change the
file used as the Pmcomm phone file.

script directory. To change the current script directory the syntax would be:
change_option("script directory=c:\pmcomm\script");

capture directory. To change the current capture file directory the syntax
would be: change_option("capture directory=c:\pmcomm\capture");

chat. This option allows you to turn the Pmcomm chat mode on or off. The syntax
to turn off chat mode is: change_option("chat=OFF"); To turn this option on you
would replace the OFF with ON.

auto cisb. This option allows you to turn the automatic CISB file transfer on
or off. The syntax to turn off auto CISB is: change_option("auto cisb=OFF"); To
turn this option on you would replace the OFF with ON.

cisb recovery. This option allows you to turn the CISB file recovery on or off.
The syntax to turn off the CISB file recovery is: change_option("cisb
recovery=OFF"); To turn this option on you would replace the OFF with ON.

baud. This option allows you to change the current baud rate. This will also
change the default baud rate saved in the setup file. The syntax for this
command is: change_option("baud=19200");

startup script. Use this command to change the name of the script that will be
executed upon startup of Pmcomm. The syntax of this command is:
change_option("startup script=c:\pmcomm\startup.scr");

exit on hangup. This command allows you to have Pmcomm exit once data carrier
detect (DCD) has dropped. This will only work correctly if Monitor DCD is also
selected. The syntax for this command is: change_option("exit on hangup=ON");

working directory. To change the current working directory the syntax would be:
change_option("working directory=c:\pmcomm");

scroll size. This command allows you to change the size of the Extended Scroll
Back buffer. To change the scroll size the syntax would be:

change_option("scroll size=65535");

keymap. The keymap must be in the working directory of Pmcomm. To change the
keymap currently in use the syntax would be : change_option("keymap=ansi.map");

prompt on hangup. This command will turn on or off the prompt on hangup option.
To turn this option on the syntax would be : change_option("prompt on
hangup=ON");

prompt to save screen size. This command will turn on or off the prompt to save
screen size option. To turn this option on the syntax would be :
change_option("prompt to save screen size=ON");

prompt to save setup. This command will turn on or off the prompt to save setup
option. To turn this option on the syntax would be : change_option("prompt to
save setup=ON");

prompt on capture. This command will turn on or off the prompt on capture
option. To turn this option on the syntax would be : change_option("prompt on
captue=ON");

close device. This command will turn on or off the option to close the Port
Device when it is not in use. To turn this option on the syntax would be :
change_option("close device=ON");


ΓòÉΓòÉΓòÉ 12.2.8. Internal script dial ΓòÉΓòÉΓòÉ

dial("name");

This command will allow a script to dial a number listed in the current Pmcomm
dialing directory. To dial the entry call Compu-Plane you would use the
following syntax: dial("Compu-Plane");


ΓòÉΓòÉΓòÉ 12.2.9. shell ΓòÉΓòÉΓòÉ

shell("\path\filename.ext");

Allows you to call an external program to run from a script.


ΓòÉΓòÉΓòÉ 12.2.10. exit (function) ΓòÉΓòÉΓòÉ

exit();

This function, once called, will exit Pmcomm.


ΓòÉΓòÉΓòÉ 12.3. 'C' Functions ΓòÉΓòÉΓòÉ

These are the functions that are included in the cpmcomm and cpmcom32
libraries. The cpmcomm.lib is a large model library and the cpmcom32.lib is a
large model 32 bit library. The cpmcomm.h file has function definitions for the
cpmcomm library and cpmcom32.h file has function definitions for the cpmcom32
library, and should be included in any program that uses the cpmcomm libraries.
The 32 bit library is made to be used with the IBM C Set/2 compiler. The
function init_lib must be called before any other of the library routines are
used.


ΓòÉΓòÉΓòÉ 12.3.1. wait_for ΓòÉΓòÉΓòÉ

USHORT wait_for(USHORT argc,CHAR **argv,HFILE port);

Example

USHORT result;

CHAR *argv[2];

CHAR string1[80];

CHAR string2[80];

strcpy(string1,"first name?");

strcpy(string2,"last name?");

argv[0] = string1;

argv[1] = string2;

result = wait_for(2,argv,port);

Description

The above example would wait for either first name?, or last name?, from the
communication port. The function will return the index of the string that
matched. For example if the wait_for received last name?, then the result would
be 2. You can specify any number of strings depending on memory available.

Returns

Index of matched string or zero if timeout or error.


ΓòÉΓòÉΓòÉ 12.3.2. wait_fore ΓòÉΓòÉΓòÉ

USHORT wait_fore(USHORT argc,CHAR **argv,HFILE port, HFILE screen_handle);

Example

USHORT result;

CHAR *argv[2];

CHAR string1[80];

CHAR string2[80];

strcpy(string1,"first name?");

strcpy(string2,"last name?");

argv[0] = string1;

argv[1] = string2;

result = wait_for(2,argv,port,screen_handle);

Description

The first example would wait for either first name?, or last name?, from the
communication port and echo the out_put to the Pmcomm screen.

Returns

Index of matched string or zero if timeout or error.


ΓòÉΓòÉΓòÉ 12.3.3. put_s ΓòÉΓòÉΓòÉ

USHORT put_s(char *string,HFILE port);

Example

put_s("first name",port);

Description

This call will send string out to port. In the above example first name will be
sent to the communication port. If screen_handle is specified instead of port
then the string will be sent to the Pmcomm screen.

Returns

Length of string actually written.


ΓòÉΓòÉΓòÉ 12.3.4. sleep ΓòÉΓòÉΓòÉ

VOID sleep(ULONG time);

Example

sleep(1000L);

Description

This call will delay the program for the amount of milliseconds specified. The
above example will delay the computer for one second.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.5. beep ΓòÉΓòÉΓòÉ

VOID beep(USHORT frequency,USHORT duration);

Example

beep(495,100);

Description

The above example will beep the speaker.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.6. os2_shell ΓòÉΓòÉΓòÉ

VOID os2_shell(HFILE port,HFILE port);

Example

os2_shell(port,port);

Description

This command will allow a caller to shell to OS/2, remotely. The first
parameter is input handle and the second is the output handle. In the example
above, the command will receive and send the information to the communication
port.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.7. init_lib ΓòÉΓòÉΓòÉ

USHORT init_lib(int argc,char **argv);

Example

main(argc,argv)

{

init_lib(argc,argv);

...

}

The init_lib function will initialize some global variables that are passed on
the command line. These variables are:

USHORT port;

CHAR portname[15];

HFILE dde_output,dde_input;

HFILE screen_handle;

This function must be called before any other library function is called.

Returns

1 if sucessful and 0 if not.


ΓòÉΓòÉΓòÉ 12.3.8. 'C' set_download_path ΓòÉΓòÉΓòÉ

VOID set_download_path(char *path);

Example

set_download_path("c:\pmcomm");

Description

The above example will set the download path to c:\pmcomm. This will store all
of the files received in that directory.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.9. setcom ΓòÉΓòÉΓòÉ

SHORT setcom(char *baud,UCHAR parity,UCHAR data_bit,UCHAR stop_bits,HFILE
port);

Example

setcom("2400",'N',8,1,port);

Description

This would set the communication port to 2400 baud, no parity, 8 data bits, 1
stop bit. Baud can be from 300 to 19200 with the standard OS/2 device driver.
Parity can be N(none), O(odd), E(even), M(marked), or S(spaced). Data bits can
be 5, 6, 7 or 8. Stop bits can be 1 or 2 (2 can only be used with 5 data bits).
If the baud parameter is an empty string i.e. setcom("",'E',7,1,port) this
leaves the baud at the current rate but set the line characteristics to 7,
Even, 1.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.10. sendb ΓòÉΓòÉΓòÉ

VOID sendb(LONG length,HFILE port);

Example

sendb(300L,port);

Description

This call sends a break signal a certain time in milliseconds. The above
example would send a break signal for 300 milliseconds. This call is mostly
used to establish direct connects (not using a modem). Three hundred
milliseconds should be okay for most situations.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.11. dcd ΓòÉΓòÉΓòÉ

USHORT dcd(HFILE port);

Example

dcd(port);

Description

This call checks to see if there is a carrier detected on the modem. You can
use this to see if Pmcomm is still online to a remote computer. For this
information to be correct the modem must support dcd and the modem must be
configured to support dcd. To find the command refer to your owner's manual.

Returns

1 if carrier detected and 0 if no carrier.


ΓòÉΓòÉΓòÉ 12.3.12. char_avail ΓòÉΓòÉΓòÉ

USHORT char_avail(HFILE port);

Example

char_avail(port);

Description

This call checks to see how many characters are available in the device drivers
receive buffer. You can use this function to check to see if the device driver
has received any characters from the communication port.

Returns

Number of characters in device driver receive queue.


ΓòÉΓòÉΓòÉ 12.3.13. read_timeout ΓòÉΓòÉΓòÉ

read_timeout(USHORT timeout,HFILE port);

Example

read_timeout(20000,port);

Description

This call sets the length of time (in milliseconds) that wait_for, wait_fore,
get_ch will wait for a character from the communication port. The above example
will make the functions wait for 20 seconds.

Returns

1 if successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.14. get_ch ΓòÉΓòÉΓòÉ

CHAR get_ch(HFILE port);

Example

ch = get_ch(port);

Description

This call will get a character from the communication port. If no character is
available by the time set with read_timeout the function will return with a
value of -1. Otherwise the function will return with the character read.

Returns

char value if successful and -1 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.15. ring_detect ΓòÉΓòÉΓòÉ

USHORT ring_detect(HFILE port);

Example

ring_detect(port);

Description

This call can be used to inform a program if the phone is ringing.

Returns

1 if ring detected, 0 if no ring.


ΓòÉΓòÉΓòÉ 12.3.16. drop_dtr ΓòÉΓòÉΓòÉ

VOID drop_dtr(HFILE port);

Example

drop_dtr(port);

Description

This call is usually used to make a modem hang up. The modem must be configured
to allow this. To find the command for your modem, check your owner's manual.
Dtr needs to be dropped for about 2-3 seconds to make sure the modem sees the
drop in DTR. After that length of time raise_dtr can be called to bring DTR
back up. On a Hayes 2400 the above command will also keep the modem from doing
an auto answer until you raise_dtr again.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.17. raise_dtr ΓòÉΓòÉΓòÉ

VOID raise_dtr(HFILE port);

Example

raise_dtr(port);

Description This call is usually used after drop_dtr to allow the modem to
process commands and enable it to answer the phone.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.18. get_cursor_position ΓòÉΓòÉΓòÉ

USHORT get_cursor_position(char *str);

Example

get_cursor_position("column");

Description

The above will return the column that the cursor is in. To get the current row,
you would issue this call with "row" instead of "column". The row value that is
returned is relative to the top of the scroll back buffer. The top row of the
scroll back buffer and the first column would be 0,0.

Returns

Cursor position.


ΓòÉΓòÉΓòÉ 12.3.19. get_char_at ΓòÉΓòÉΓòÉ

VOID get_char_at(USHORT row,USHORT col,USHORT num,char *returnstr);

Example

get_char_at(0,0,80,str);

Description

The above will return the characters at the first line (stored in str) of the
scroll back buffer. It will return 80 characters, even if the characters are
spaces. The maximum number of characters that can be returned at one time is
200.

Returns

None.


ΓòÉΓòÉΓòÉ 12.3.20. 'C'capture_on ΓòÉΓòÉΓòÉ

USHORT capture_on(filename);

Example

capture_on("c:\pmcomm\cap.txt");

Description

The above will turn capture on so that everything will be saved into a file. If
you have strip ANSI configured in Pmcomm then the text only will be saved in
ANSI, VT100, and VT220 terminal emulations.

Returns

1 if successful and 0 if not.


ΓòÉΓòÉΓòÉ 12.3.21. 'C' capture_off ΓòÉΓòÉΓòÉ

VOID capture_off(VOID);

Example

capture_off();

Description

The above will turn capture off. The capture may have been started from a
script or from the menu.

Returns

1 if successful and 0 if not.


ΓòÉΓòÉΓòÉ 12.3.22. 'C' change_option ΓòÉΓòÉΓòÉ

change_option("option");

This command will allow a script to change certain options in Pmcomm. The
options that can be changed are:

device. This option will allow you to change the current device that Pmcomm is
using. For example to change the current device to COM2, the syntax would be:
change_option("device=COM2");

hardware. This option will allow you to turn hardware flow control on or off.
If you want to turn hardware flow control off the syntax would be:
change_option("hardware=OFF"); To turn hardware flow control on you would
replace the OFF with ON.

XON/XOFF. This option will allow you to turn Xon/Xoff flow control on or off.
If you want to turn Xon/Xoff flow control off the syntax would be:
change_option("XON/XOFF=OFF"); To turn Xon/Xoff flow control on you would
replace the OFF with ON.

dtr. If this option is turned on the DTR will be lowered when hangup is
selected. If you want to turn this option off the syntax would be:
change_option("dtr=OFF");

stop bits. This option will allow you to set the number of stop bits that the
communication port is set to. The communication port will be changed before the
command is completed, and the default stop bits will be set to the new value.
To set the communication port to 1 stop bit, the syntax would be:
change_option("stop bits=1"); The communication port can only be set to 1 or 2
stop bits from a script.

data bits. This option will allow you to set the number of data bits that the
communication port is set to. The communication port will be changed before the
command is completed, and the default data bits will be set to the new value.
To set the communication port to 8 data bits, the syntax would be:
change_option("data bits=8"); The communication port can be set to 8, 7, 6 or 5
data bits.

parity. This option will allow you to set the parity for the current
communication port. The communication port will be changed before the command
is completed, and the default parity will be set to the new value. To set the
communication port to Even parity, the syntax would be:
change_option("parity=Even"); The communication port can be set to None, Even ,
Odd, Mark or Space parity.

initialization string. This option allows you to change the modem
initialization string that Pmcomm uses. To change the string the syntax would
be: change_option("initialization string=ATZ");

dial timeout. This option will allow you to set the number of seconds that
Pmcomm will wait when dialing a remote computer. If you wanted to set the
number of seconds to 60 the syntax for the command would be:
change_option("dial timeout=60");

redial delay. This option will allow you to set the number of seconds that
Pmcomm will wait between dialing attempts. If you wanted to set the number of
seconds to 6 the syntax for the command would be: change_option("redial
delay=6");

hangup string. This option allows you to change the modem hangup string that
Pmcomm uses. To change the string the syntax would be: change_option("hangup
string=+++~~~ATH^M");

auto zmodem string. Some host systems do not send a standard auto zmodem
string. This command allows you to change the string that Pmcomm looks for,
when the host starts a zmodem send file transfer. When Pmcomm finds a match it
will start a zmodem receive file transfer. To change the auto zmodem string the
syntax would be:

change_option("auto zmodem string=B00000");

zmodem date. This option allows you turn on and off whether Pmcomm will compare
the file dates during a zmodem resume file transfer. The syntax to turn the
date compare off would be:

change_option("zmodem date=OFF"); To turn this option on you would replace the
OFF with ON.

zmodem rename. This option allows you turn on and off whether Pmcomm will
rename duplicate files, if a resume fails (or is turned off). If this option is
on Pmcomm will rename the new file with a number for an extension. The syntax
to turn the zmodem rename off would be:

change_option("zmodem rename=OFF"); To turn this option on you would replace
the OFF with ON.

auto zmodem. This option will allow you to turn the auto zmodem feature on or
off. If you want to turn auto zmodem off the syntax would be:
change_option("auto zmodem=OFF"); To turn auto zmodem on you would replace the
OFF with ON.

zmodem recovery. This option will allow you to turn the zmodem recovery feature
on or off. If you want to turn zmodem recovery off the syntax would be:
change_option("zmodem recovery=OFF"); To turn zmodem recovery on you would
replace the OFF with ON.

zmodem crc. This option allows you to select either the 32 bit or 16 bit zmodem
CRC error detection option. To select the 32 bit option the syntax would be:
change_option("zmodem crc=32");

download directory. To change the current download directory the syntax would
be: change_option("download directory=c:\pmcomm\");

hide dial. This option allows you to select if the main terminal window is
hidden while Pmcomm is dialing a remote computer. To allow the main window to
remain visible while dialing the syntax would be: change_option("hide
dial=OFF"); To turn hide dial on you would replace the OFF with ON.

hide transfer. This option allows you to select if the main terminal window is
hidden while Pmcomm is doing a file transfer. To allow the main window to
remain visible while doing file transfers the syntax would be:
change_option("hide transfer=OFF"); To turn hide transfer on you would replace
the OFF with ON.

auto vertical. This option determines if Pmcomm will automatically scroll the
terminal window vertically to keep the current cursor position in the window.
To turn this option off the syntax would be: change_option("auto
vertical=OFF"); To turn this option on you would replace the OFF with ON.

auto horizontal. This option determines if Pmcomm will automatically scroll the
terminal window horizontally to keep the current cursor position in the window.
To turn this option off the syntax would be: change_option("auto
horizontal=OFF"); To turn this option on you would replace the OFF with ON.

save dial. If this option is on then Pmcomm will store the position of the
dialing dialog box, and use it the next time a number is dialed. To turn this
option off the syntax would be: change_option("save dial=OFF"); To turn this
option on you would replace the OFF with ON.

save transfer. If this option is on then Pmcomm will store the position of the
transfer dialog box, and use it the next time a file is transferred dialed. To
turn this option off the syntax would be: change_option("save transfer=OFF");
To turn this option on you would replace the OFF with ON.

sound. This option allows you to turn the warning beeps in Pmcomm, on or off.
To turn this option off the syntax would be: change_option("sound=OFF"); To
turn this option on you would replace the OFF with ON.

monitor dcd. If this option is on, then Pmcomm will monitor the presence of
data carrier detect (DCD). To turn this option off the syntax would be:
change_option("monitor dcd=OFF"); To turn this option on you would replace the
OFF with ON.

page length. This option allows you to set the ANSI page length from a script.
Following is an example of how to set the page length to 25 lines.
change_option("page length=25");

terminal. This option allows you to change the type of terminal from within a
Pmcomm script. The following example would set the terminal type to ANSI.
change_option("terminal=ANSI"); The available valid terminal types are TTY,
ANSI, VT100 or VT220.

foreground. This option allows you to change the foreground color from within a
Pmcomm script. The available colors are:

black
blue
green
cyan
red
magenta
brown
white
dark grey
light blue
light green
light cyan
light red
pink
yellow
bright white

The syntax to change the foreground color to cyan would be:
change_option("foreground=cyan");

background. This option allows you to change the background color from within a
Pmcomm script. The available colors are:

black
blue
green
cyan
red
magenta
brown
white
dark grey
light blue
light green
light cyan
light red
pink
yellow
bright white

The syntax to change the background color to black would be:
change_option("background=black");

echo. This option allows you turn on and off the local keystroke echo. The
syntax to turn echo off would be: change_option("echo=OFF"); To turn this
option on you would replace the OFF with ON.

prefix1
prefix2
prefix3

 These options allow you to change the dialing prefixes. For example to change
prefix1 you would use the following syntax: change_option("prefix1=ATDT");

suffix1
suffix2
suffix3

 These options allow you to change the dialing suffixes. For example to change
suffix1 you would use the following syntax: change_option("suffix1=^M");

strip ansi. This option allows you to select if Pmcomm will strip the ANSI
commands from a capture file. The syntax to turn off the stripping of the ANSI
commands would be: change_option("strip ansi=OFF"); To turn this option on you
would replace the OFF with ON.

macro1
macro2
macro3
macro4
macro5
macro6
macro7
macro8
macro9
macro10

These options allow you to change the keyboard macros. For example to change
macro1 you would use the following syntax: change_option("macro1=ATZ");

phone directory. To change the current phone directory the syntax would be:
change_option("phone directory=c:\pmcomm\pmcomm.fon"); This would change the
file used as the Pmcomm phone file.

script directory. To change the current script directory the syntax would be:
change_option("script directory=c:\pmcomm\script");

capture directory. To change the current capture file directory the syntax
would be: change_option("capture directory=c:\pmcomm\capture");

chat. This option allows you to turn the Pmcomm chat mode on or off. The syntax
to turn off chat mode is: change_option("chat=OFF"); To turn this option on you
would replace the OFF with ON.

auto cisb. This option allows you to turn the automatic CISB file transfer on
or off. The syntax to turn off auto CISB is: change_option("auto cisb=OFF"); To
turn this option on you would replace the OFF with ON.

cisb recovery. This option allows you to turn the CISB file recovery on or off.
The syntax to turn off the CISB file recovery is: change_option("cisb
recovery=OFF"); To turn this option on you would replace the OFF with ON.

baud. This option allows you to change the current baud rate. This will also
change the default baud rate saved in the setup file. The syntax for this
command is: change_option("baud=19200");

startup script. Use this command to change the name of the script that will be
executed upon startup of Pmcomm. The syntax of this command is:
change_option("startup script=c:\pmcomm\startup.scr");

exit on hangup. This command allows you to have Pmcomm exit once data carrier
detect (DCD) has dropped. This will only work correctly if Monitor DCD is also
selected. The syntax for this command is: change_option("exit on hangup=ON");

working directory. To change the current working directory the syntax would be:
change_option("working directory=c:\pmcomm");

keymap. The keymap must be in the working directory of Pmcomm. To change the
keymap currently in use the syntax would be : change_option("keymap=ansi.map");

prompt on hangup. This command will turn on or off the prompt on hangup option.
To turn this option on the syntax would be : change_option("prompt on
hangup=ON");

prompt to save screen size. This command will turn on or off the prompt to save
screen size option. To turn this option on the syntax would be :
change_option("prompt to save screen size=ON");

prompt to save setup. This command will turn on or off the prompt to save setup
option. To turn this option on the syntax would be : change_option("prompt to
save setup=ON");

prompt on capture. This command will turn on or off the prompt on capture
option. To turn this option on the syntax would be : change_option("prompt on
captue=ON");

close device. This command will turn on or off the option to close the Port
Device when it is not in use. To turn this option on the syntax would be :
change_option("close device=ON");


ΓòÉΓòÉΓòÉ 12.3.23. 'C' dial ΓòÉΓòÉΓòÉ

dial("name");

This command will allow a script to dial a number listed in the current Pmcomm
dialing directory. To dial the entry call Compu-Plane you would use the
following syntax: dial("Compu-Plane");


ΓòÉΓòÉΓòÉ 12.3.24. 'C' get_dial_memo ΓòÉΓòÉΓòÉ

get_dial_memo(char *returnstr);

This command will retrieve the information stored in the memo field of the
currently connected phone number. This will allow you to, for example, store
your password in the dialing directory memo field, and write a script to use
it. By doing this you can change your password without editing the script. All
you would have to do is change the text in the memo field for that number. To
retrieve the text stored in the current memo field the syntax would be:
get_dial_memo (returnstr);


ΓòÉΓòÉΓòÉ 12.3.25. 'C' clipboard_paste ΓòÉΓòÉΓòÉ

clipboard_paste(char *returnstr);

This command will retrieve text stored in the OS/2 clipboard. The maximum
amount of text that can be retrieved at one time is 8192 bytes. To retrieve the
text stored in the clipboard the syntax would be: clipboard_paste(returnstr);


ΓòÉΓòÉΓòÉ 12.3.26. 'C' clipboard_copy ΓòÉΓòÉΓòÉ

clipboard_copy(char *str);

This command will copy text to the OS/2 clipboard. The maximum amount of text
that can be sent at one time is 8192 bytes. To send text to the clipboard the
syntax would be: clipboard_copy("This is a test");


ΓòÉΓòÉΓòÉ 12.3.27. 'C' clipboard_append ΓòÉΓòÉΓòÉ

clipboard_append(char *str);

This command will append text to the existing text in the OS/2 clipboard. The
maximum amount of text that can be sent at one time is 8192 bytes. To append
text to the clipboard the syntax would be: clipboard_append("This is a test");


ΓòÉΓòÉΓòÉ 12.3.28. xmodem_send ΓòÉΓòÉΓòÉ

USHORT xmodem_send(char *filename);

Example

xmodem_send("d:\path\filename.ext");

Description

This call will invoke the Xmodem_CRC send routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when download is
selected from the menu.

Returns

1 if the transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.29. xmodem_receive ΓòÉΓòÉΓòÉ

USHORT xmodem_receive(char *filename);

Example

xmodem_receive("d:\path\filename.ext");

Description

This call will invoke the Xmodem_CRC receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when uploading
from the menu. The file name specified must include a path.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.30. xmodem_chk_send ΓòÉΓòÉΓòÉ

USHORT xmodem_chk_send(char *filename);

Example

xmodem_chk_send("d:\path\filename.ext");

Description

This call will invoke the Xmodem_Checksum send routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when download is
selected from the menu.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.31. xmodem_chk_receive ΓòÉΓòÉΓòÉ

USHORT xmodem_chk_receive(char *filename);

Example

xmodem_chk_receive("d:\path\filename.ext");

Description

This call will invoke the Xmodem_Checksum receive routine, built into Pmcomm.
Once issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when uploading
from the menu. The file name specified must include a path.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.32. xmodem_1k_send ΓòÉΓòÉΓòÉ

USHORT xmodem_1k_send(char *filename);

Example

xmodem_1k_send("d:\path\filename.ext");

Description

This call will invoke the 1K-Xmodem send routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when download is
selected from the menu.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.33. xmodem_1k_receive ΓòÉΓòÉΓòÉ

USHORT xmodem_1k_receive(char *filename);

Example

xmodem_1k_receive("d:\path\filename.ext");

Description

This call will invoke the 1K-Xmodem receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when uploading
from the menu. The file name specified must include a path.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.34. ymodem_send ΓòÉΓòÉΓòÉ

USHORT ymodem_send(USHORT num_files,CHAR **filearray);

Example

USHORT result;

CHAR *filearray[2];

CHAR string1[80];

CHAR string2[80];

strcpy(string1,"pmcom106.zip");

strcpy(string2,"pmcom107.zip");

filearray[0] = string1;

filearray[1] = string2;

result = ymodem_send(2,filearray);

Description

This call will invoke the Ymodem send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer box that it does when download is selected
from the menu. As many as 8 files can be sent at one time.

Returns

Number of files successfully transferred.


ΓòÉΓòÉΓòÉ 12.3.35. ymodem_receive ΓòÉΓòÉΓòÉ

USHORT ymodem_receive(VOID);

Example

ymodem_receive();

Description

This call will invoke the Ymodem receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when uploading
from the menu. Only a single file at a time will be accepted.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.36. ymodemg_send ΓòÉΓòÉΓòÉ

USHORT ymodemg_send(USHORT num_files, CHAR **filearray);

Example

USHORT result;

CHAR *filearray[2];

CHAR string1[80];

CHAR string2[80];

strcpy(string1,"pmcom106.zip");

strcpy(string2,"pmcom107.zip");

filearray[0] = string1;

filearray[1] = string2;

result = ymodemg_send(2,filearray);

Description

This call will invoke the Ymodem-g send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer box that it does when downloading from the
menu. As many as 8 files can be sent at one time.

Returns

Number of files successfully transferred.


ΓòÉΓòÉΓòÉ 12.3.37. ymodemg_receive ΓòÉΓòÉΓòÉ

USHORT ymodemg_receive(VOID);

Example

ymodemg_receive();

Description

This call will invoke the Ymodem-g receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when uploading
from the menu. Only one file at a time can be received.

Returns

1 if call is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.38. zmodem_send ΓòÉΓòÉΓòÉ

USHORT zmodem_send(USHORT num_files, CHAR **filearray);

Example

USHORT result;

CHAR *filearray[2];

CHAR string1[80];

CHAR string2[80];

strcpy(string1,"pmcom106.zip");

strcpy(string2,"pmcom107.zip");

filearray[0] = string1;

filearray[1] = string2;

result = zmodem_send(2,filearray);

Description

This call will invoke the Zmodem send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer box that it does when downloading from the
menu. As many as 100 files may be transferred at one time.

Returns

Number of files successfully transferred.


ΓòÉΓòÉΓòÉ 12.3.39. zmodem_receive ΓòÉΓòÉΓòÉ

USHORT zmodem_receive(VOID);

Example

zmodem_receive();

Description

This call will invoke the Zmodem receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when uploading
from the menu. Only one file at a time can be received.

Returns

The number of files transferred.


ΓòÉΓòÉΓòÉ 12.3.40. kermit_send ΓòÉΓòÉΓòÉ

USHORT kermit_send(USHORT num_files, CHAR **filearray);

Example

USHORT result;

CHAR *filearray[2];

CHAR string1[80];

CHAR string2[80];

strcpy(string1,"pmcom106.zip");

strcpy(string2,"pmcom107.zip");

filearray[0] = string1;

filearray[1] = string2;

result = kermit_send(2,filearray);

Description

This call will invoke the Kermit send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer box that it does when downloading from the
menu. As many as 100 files may be transferred at one time.

Returns

Number of files successfully transferred.


ΓòÉΓòÉΓòÉ 12.3.41. kermit_receive ΓòÉΓòÉΓòÉ

USHORT kermit_receive(VOID);

Example

kermit_receive();

Description

This call will invoke the Kermit receive routine, built into Pmcomm. Once
issued the call will not return until the transfer either finishes or is
aborted. Pmcomm will show the normal transfer box that it does when uploading
from the menu. Only one file at a time can be received.

Returns

Number of files transferred.


ΓòÉΓòÉΓòÉ 12.3.42. ascii_send ΓòÉΓòÉΓòÉ

USHORT ascii_send(char *filename);

Example

ascii_send("d:\path\filename.ext");

Description

This call will invoke the ASCII send routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer box that it does when downloading from the
menu.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.43. ascii_receive ΓòÉΓòÉΓòÉ

USHORT ascii_receive(filename);

Example

ascii_receive("d:\path\filename.ext");

Description

This call will invoke the ASCII receive routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer box that it does when uploading from the
menu. The file name specified must not include a path.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.44. cisb_send ΓòÉΓòÉΓòÉ

USHORT cisb_send(char *filename);

Example

cisb_send("d:\path\filename.ext");

Description

This call will invoke the CISB send routine, built into Pmcomm. Once issued the
call will not return until the transfer either finishes or is aborted. Pmcomm
will show the normal transfer box that it does when download is selected from
the menu.

Returns

1 if the transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.3.45. cisb_receive ΓòÉΓòÉΓòÉ

USHORT cisb_receive(char *filename);

Example

cisb_receive("d:\path\filename.ext");

Description

This call will invoke the CISB receive routine, built into Pmcomm. Once issued
the call will not return until the transfer either finishes or is aborted.
Pmcomm will show the normal transfer box that it does when uploading from the
menu. The file name specified must include a path.

Returns

1 if transfer is successful and 0 if unsuccessful.


ΓòÉΓòÉΓòÉ 12.4. Sample Scripts ΓòÉΓòÉΓòÉ

These are scripts to help you, when you start to write your own scripts.


ΓòÉΓòÉΓòÉ 12.4.1. REXX Sample ΓòÉΓòÉΓòÉ

/* Sample Script*/

/* This script will allow you to log on to Compu-Plane once you change the
strings stored in the variables called name and pass. Enter the sample.scr name
for the script name of the Compu-Plane phone number, and change the name in the
shell( ) function to the path and filename of this file.*/

Call RxFuncadd "init_dll","RxPmcomm","init_dll"

/* This function registers the init_dll function with REXX. The init_dll
function will register the rest of the functions in the rxpmcomm.dll. */

Parse arg port portname screen_handle dde_output dde_input semaphore

/*These are the values that Pmcomm passes on the command line to an external
program. These values can then be used in different REXX functions along with
the rxpmcomm.dll functions. Following is the description of each value: */

/* port = The handle of the open communication port in Pmcomm */

/* portname = The name of the opened communication port ie.. COM1*/

/* screen_handle = Anything written to the handle will be printed on the Pmcomm
screen. */

/* dde_input = This must be passed to most functions. It allows the
rxpmcomm.dll function to communicate with Pmcomm. */

/* dde_output = This must be passed to most functions. It allows the
rxpmcomm.dll function to communicate with Pmcomm. */

/* semaphore = This also must be passed to any file transfer function. It makes
your REXX program wait until the transfer has been completed. */

Call init_dll

/* Required before any other rxpmcomm.dll functions are called. */

/* Setup variables  */

name = 'first;last'  /* where first is your first name and last is*/
pass = 'password'   /* your last name and password is your password.*/
cr  = '0d'x

Call read_timeout '20000',port

/* This sets the read timeout for 20 seconds. This is used in the Wait_for,
Wait_fore, and the Get_ch functions. */

Say 'Waiting for first name ...'

/* This will be printed on the REXX screen. */

Do Forever

Call Wait_fore 'name', 'password', 'continue?','?->', port, screen_handle

/* This call will echo all characters to the Pmcomm screen that come from the
open communication port. When one of the strings are matched the function will
return the index of the matched string in the variable result. For example if
it receives the string password then the result will be equal to 2. If the
function waits longer then the read timeout value then result will be equal to
0. */
match = result
  Select
   When match=1 then
    Do
     Call Put_s name||cr,port
     Say 'Waiting for password ...'
    End
   When match=2 then Call Put_s pass||cr,port
   When match=3 then Call Put_s cr,port
   When match=4 then Exit
  Otherwise nop
  End
End
Say 'Script ended  -' date( ) time( )
Exit


ΓòÉΓòÉΓòÉ 12.4.2. Internal Sample ΓòÉΓòÉΓòÉ

An example script to log onto a Multi-Net Communications BBS could be:

wait_for ("first name");
puts ("john\n");
wait_for("last name");
puts("doe\n");
wait_for("password");
puts("password\n");
sleep (1000);
puts("\n");

Scripts can be executed automatically when logging onto a BBS by specifying the
script filename in the dialing directory for that phone number. You can execute
a script from the File menu at anytime.


ΓòÉΓòÉΓòÉ 13. Installing Pmcomm Host Mode ΓòÉΓòÉΓòÉ

To install Pmcomm's Host Mode, you must run the install program included on the
Pmcomm disk. Make sure you answer all the Host mode questions (including the
password). If you do not have a destination directory for Pmcomm listed, but do
have a host directory listed, only the host mode will be installed. This can be
usefully if you have already installed Pmcomm, and just want to install the
host mode. The Fixed Baud check box should be checked for most high-speed
modems (bauds above 2400 baud). This selection fixes the DTE to DCE baud, and
will improve throughput on high-speed modems. If this is an "open" system new
users will be stored in this file automatically. If this is a "closed" system
only the people that are registered in this file will be able to access the
Host Mode. This can be changed by editing the host.cmd file. When the host mode
is installed it defaults to a "open" system. To change this edit host.cmd and
change the open to closed.

The six files that the install program creates are HOSTPASS.FLE, HOSTDIR.FLE,
HOSTHEAD.FLE, HOST.SCR, HOSTNEWU.FLE, and HOSTHELP.FLE. The HOSTPASS.FLE file
is where all of the users' names, passwords, securities, and last time on are
stored. The HOSTDIR.FLE file is a list of the directories that have been
created for the host mode. The HOSTHEAD.FLE file is the file that is displayed
to users when they logon. The HOST.SCR file is the main executable script. The
HOSTNEWU.FLE file is the file that is displayed to new users. In order for a
user to be able to receive help from the menu, the HOSTHELP.FLE must contain
the information that will be displayed.

The Host mode is a REXX script and is started just like anyother REXX script.
Once the script has been started Pmcomm is ready to receive calls.


ΓòÉΓòÉΓòÉ 14. Using the timer program ΓòÉΓòÉΓòÉ

The Timer program allows the user to automatically start Pmcomm at a certain
time. The options allows the user to specify a name of a file to be passed on
the command line. This would be used to pass a command line option to Pmcomm on
startup. See Command_line_options.

With the execution frequency option you can choose the days that you wish
Pmcomm to automatically start. This option in conjunction with the time option
sets up Pmcomm for automatic startup.

If you have the timer program set up as an object on the desktop, make sure the
working directory for that object is the directory that Pmcomm is installed in.


ΓòÉΓòÉΓòÉ 15. How To... ΓòÉΓòÉΓòÉ

This section gives you examples of how to set Pmcomm up to do different things.


ΓòÉΓòÉΓòÉ 15.1. How to make Pmcomm receive incoming calls. ΓòÉΓòÉΓòÉ

To make Pmcomm receive an incoming call without using the Host Mode, send the
following command to the modem.

ATS0=1

This can be setup as a macro and then you would have a button on the button bar
to put you modem in auto answer.


ΓòÉΓòÉΓòÉ 15.2. How to Use Pmcomm with a modem pool. ΓòÉΓòÉΓòÉ

Because Pmcomm does not use ACDI, and will allow you to enter any valid 12
character name for a device, it will work with a shared serial port modem pool.
This allows you to have modems on a server that users can access from their
workstations. This can save a considerable about of money.

First the ibmlan.ini file, on the Server and the Requesters, must be edited in
order to operate Pmcomm in a modem pool. The "charwait" variable must be
changed from it's default setting of 3600 to a setting of 3 and then re-boot
the Server and all of the Requesters.

The following is a flash from IBMLink on how to setup a modem pool using Pmcomm
and Lan Server.

The rest of this scenario concerns the OS/2 LAN Server definitions. When LAN
Server definitions and actions are complete, defined users at any OS/2
Requestor can run the program from the OS/2 Public Applications Window. The
serial port and modem at the LAN Server will be shared. To begin, logon as an
administrator in the proper domain. Then follow instructions for the following:


a. Defining the shared modem
b. Defining the shared program files
c. Defining the program as a public OS/2 application
d. Defining the working directory
e. Sharing the modem and the program
f. Assigning the modem and the program to the users as they log on.

DEFINING THE SHARED MODEM
  Follow this sequence:

  DEFINITION
  ALIASES
  SERIAL DEVICES
  --NEW-- (With cursor on --NEW--, press space bar to
  choose, press enter or click on ACTION)
  CREATE(Create a serial device alias - I used an
      alias of MODEM1, chose COM1 from the device
      pool using F4 for the list, and choose to
      share the port at server startup)


*-----------------------------------------------------------*

              Create Alias - Serial Device

  Complete the panel; then Enter.

  Alias . . . . . . . . . . . . . . . MODEM1
  Description . . . . . . . . . . . . Shared modem
  Server Name . . . . . . . . . . . . Chosen with the F4 key
  Server Device Pool. . . . . . . . . COM1
  Priority. . . . . . . . . . . . . . 5 (chosen arbitrarily)
  Maximum number of users . . . . . . (Number of shared serial ports)
  When shared . . . . . . . . . > At server startup

|-----------------------------------------------------------|

  ENTER  Escape=Cancel  F1=Help  F4=List

*-----------------------------------------------------------*

DEFINING THE SHARED PROGRAM FILES
Follow this sequence:
  DEFINITION
  ALIASES
  FILES
  --NEW-- (With cursor on --NEW--, press space bar to
      choose, press enter or click on ACTION)
  CREATE (Create the file alias)

*---------------------------------------------------------*

              Create Alias - Files

  Complete the panel; then Enter.

  Alias . . . . . . . . . . . . . . . PMCOMM
  Description . . . . . . . . . . . . Program to access shared modem
  Server Name . . . . . . . . . . . . Chosen with the F4 key
  Server Path to Directory. . . . . . :OS2:ASYNC:PMCOMM

  Maximum number of users . . . . . . (left blank)
  When shared . . . . . . . . . > At server startup

|---------------------------------------------------------|

  ENTER  Escape=Cancel  F1=Help  F4=List

*---------------------------------------------------------*

DEFINING THE PROGRAM AS A PUBLIC OS/2 APPLICATION
Follow this sequence:
  DEFINITION
  APPLICATION
  PUBLIC OS/2 APPLICATION
  --NEW-- (With cursor on --NEW--, press space bar to
    choose, press enter or click on ACTION)
  CREATE

*----------------------------------------------------------*

              Create OS/2 Application Details

  Complete the panel; then Enter.

  Application ID. . . . . . . . . . . PMCOMMX
  Description . . . . . . . . . . . . Shared modem communications
  Program location. . . . . . . . . . Remote
  Drive or alias. . . . . . . . . . . PMCOMM
  Remaining path to program . . . . . :
  Command line. . . . . . . . . . . . PMCOMM.EXE
  Prompt used for parameters? . . . . NO
  Program type. . . . . . . . . . . . OS/2 PM

|----------------------------------------------------------|

  ENTER  Escape=Cancel  F1=Help  F4=List

*----------------------------------------------------------*

DEFINING THE WORKING DIRECTORY

PMCOMM has support files that should reside in the working directory at
the server. If this directory is not assigned, each user must have these
files on their own disk.

  Follow this sequence:
  DEFINITION
  APPLICATION
  PUBLIC OS/2 APPLICATION
  --PMCOMMX-- (With cursor on --PMCOMMX--, press space
    bar to choose, press enter or click on
    ACTION)
  WORKING DIRECTORY

*---------------------------------------------------------*

                  Working Directory

  Complete the panel; then Enter.

  Working Directory . . . . . . . . . REMOTE
  Drive or alias. . . . . . . . . . . PMCOMM
  Remaining path to program . . . . . :
  Assigned Drive. . . . . . . . . . . P (chosen arbitrarily)

|---------------------------------------------------------|

  ENTER  Escape=Cancel  F1=Help  F4=List

*---------------------------------------------------------*

SHARING THE PROGRAM AND THE MODEM
  Follow this sequence:
  ACTION
  RESOURCE SHARING
  --PMCOMM-- (With cursor on --PMCOMM--, press spacebar
      to choose, press enter or click on ACTION)
  START SHARING
  --MODEM1-- (With cursor on --MODEM1--, press spacebar
      to choose, press enter or click on ACTION)
  START SHARING

ASSIGNING RESOURCES TO USERS AS THEY LOG ON

  Follow this sequence for each user, to assign MODEM1 as a user
      logs on:
  DEFINITION
  USERS
  -- User -- (With cursor on the user name, press F10)
  LOGON
  SERIAL DEVICE ASSIGNMENTS
  Assign MODEM1 to a COM port

  Follow this sequence for each user, to copy the program to the user's

  START PROGRAMS window:
  DEFINITION
  USERS
  -- User -- (With cursor on the user name, press spacebar
      to choose, press enter or click on ACTION)
  PROGRAM STARTER
  --PMCOMMX-- (With cursor on --PMCOMMX-- press the
      spacebar to choose)


ΓòÉΓòÉΓòÉ 15.3. How to Use Pmcomm with IBMLink. ΓòÉΓòÉΓòÉ

If you have access to IBMLink (ask an IBM SE) you can use Pmcomm to call. The
first thing you will need is a phone number that will work with Pmcomm. This
type of number is called, an SS/EFS number. This stands for, Start Stop
Enhanced Full Screen. It allows access to IBMLink through a 3708 protocol
converter. To find a number in your area, ask your IBM SE, or order book number
GC-34-22-34. It has a current list of all the public IBMLink phone numbers in
it.

Once you have the required phone number, you can add it to the Pmcomm dialing
directory. You should set the Parity to Even, the Data bits to 7, and the Stop
bits to 1. The terminal type should be set to VT220. Once connected you will
see a prompt that asks you for your terminal type. If you press enter now it
will display a list of available terminals. The best choice here is to select
VT220, which is selection 18. By selecting VT220 you are able to use additional
commands that are not available with VT100. If you select VT220 the first nine
PF keys will be the numeric key pad keys (the num lock must be off). For
example, PF1 will be the 1 on the key pad, PF2 will be 2 and so on. For PF10 it
will be the F1 key, PF11 will be the F2 key and PF12 will be the F3 key. To do
a reset press the Ctrl-R and to do a clear press the Ctrl-C.

Once logged onto IBMLink just follow the prompts and you shouldn't have any
problem.


ΓòÉΓòÉΓòÉ 15.4. How to Use Pmcomm with ESDTools. ΓòÉΓòÉΓòÉ

Once you are logged onto ESDTools and have selected the files you wish to
receive, press the PF9 key (using VT220 this is the 9 on the numeric keypad).
ESDTools will then ask you which drive you will be receiving the file to.
Choose any drive as this parameter will be ignored by Pmcomm. You will then be
prompted for the operating system, select OS/2. The last selection will be for
the type of connection (i.e. Asynch etc...), select the appropriate connection
type. ESDTools will then tell you not to press the enter key until prompted to
do so by your communications software. At this time select Transfer, Download
from the Pmcomm menu. Once the transfer has completed you can then press the
enter key to return to the file list menu.


ΓòÉΓòÉΓòÉ 15.5. How to Use a REXX program as a script. ΓòÉΓòÉΓòÉ

A REXX program can be executed from Pmcomm by entering the name of the program
name directly into the dialing_directory or from the start script menu. A REXX
program can also be started by using the shell command in a macro. An example
of this would be:

shell("c:\pmcomm\plane.cmd");

This would execute the REXX script called plane.cmd. This allows you a quick
and easy way to execute often used scripts.


ΓòÉΓòÉΓòÉ 15.6. How to Use drag and drop. ΓòÉΓòÉΓòÉ

When files are dragged from the file manager and dropped onto Pmcomm's terminal
emulation screen, the transfer protocol that is listed for that phone number
will be invoked and the file(s) will be sent to the remote computer. If you
have Monitor_DCD selected then drag options will not be allowed until connected
with another computer.

To drag files from the file manager under OS/2 1.3, or drive object under OS/2
2.x, select a file (or files) and then click on the selected file(s) with the
RIGHT mouse button and hold the button down. Once you have begun to drag the
files with the mouse the mouse pointer will change shape. If the mouse pointer
is over a program that does not accept drag and drop the pointer will again
change shape. When the mouse pointer is over any part of Pmcomm you can release
the right mouse button. This will drop the files onto Pmcomm and Pmcomm will
send them. This will even work if Pmcomm is an icon.

To change the protocol for the current phone number, select upload from the
menu and then select the protocol you want (make sure that the save to dialing
directory is selected). After pressing the OK button the file open dialog box
will be displayed. Just press cancel and you can now use the drag and drop with
the new protocol.

If a file is dropped onto Pmcomm while it is an icon in a group menu, this file
will be used as a setup file, and Pmcomm will be invoked.

The drag and drop feature is also available for two of the buttons on the
Button Bar. For more information see Button_Bar.


ΓòÉΓòÉΓòÉ 16. Troubleshooting. ΓòÉΓòÉΓòÉ

Following are some problems that may occur when using Pmcomm.


ΓòÉΓòÉΓòÉ 16.1. Device Open error. ΓòÉΓòÉΓòÉ

This message is displayed if Pmcomm can not open the specified device. If you
are trying to open COM1, for example, and another program already has it open
then this message will be displayed. If you are using the communication ports
on the machine you are running Pmcomm on (not across a LAN). Then you must have
the communication port device driver installed. For example, you should have a
statement in your config.sys file, DEVICE=C:\OS2\COM.SYS. If not you will get
the device open error.

If you get this message when trying to access a communication port on a server,
refer to the Modem_Pool section. One of the common problems is not first
logging onto the network before trying to access the communication port. Also
make sure you use Alias names that don't conflict with names on the local
machine. For example don't try to use the name COM1 for the name of the remote
communication port, if you have a COM1 on your local machine. Instead use a
name like COM5, which normally will not be used on your local machine.


ΓòÉΓòÉΓòÉ 16.2. File transfers not available. ΓòÉΓòÉΓòÉ

If you have Monitor_DCD turned on under Port Options and Pmcomm does not detect
DCD then the upload and download options will be greyed out. You can turn the
Monitor DCD option off and you will then be able to transfer files. Some common
reasons for Pmcomm not being able to detect are:

Serial cable that does not support the DCD line.
Modem not configured to have DCD follow the state of the phone line.
Modem does not support DCD.

The monitor DCD option should also be turned off if using Pmcomm with a modem
pool.


ΓòÉΓòÉΓòÉ 16.3. Pmcomm will not dial out. ΓòÉΓòÉΓòÉ

The most common cause of this is a DOS program that has corrupted the
communication port. Compiled basic program that are executed in the DOS box,
for example, will sometime poll the available devices. When this happens the
communication device driver is effected and Pmcomm will not be able to send
information to the communication port. When this happens you will have to IPL
(boot) the computer.


ΓòÉΓòÉΓòÉ 16.4. Typed characters do not echo to the screen. ΓòÉΓòÉΓòÉ

Some electronic information services, such as Genie, run in what is called
"half-duplex" mode. When in this mode the typed characters are not echoed to
the screen. Pmcomm's default mode is "full duplex" which lets the services,
like Genie, echo the characters to the screen. To make Pmcomm echo the typed
characters to the screen, select the Screen dialog box under the main Options
menu and check local echo on.


ΓòÉΓòÉΓòÉ 16.5. Help not available. ΓòÉΓòÉΓòÉ

This message will be displayed if Pmcomm can not find the pmcomm.hlp file in
the current directory. If you have Pmcomm installed in a Group menu make sure
that you have the working directory set to the directory that Pmcomm is
installed in.


ΓòÉΓòÉΓòÉ 16.6. Pmcomm locks with a shared serial port. ΓòÉΓòÉΓòÉ

If Pmcomm locks up when trying to access a shared serial port you must edit the
ibmlan.ini file in the Server well as all of the Requesters. Change the
variable "charwait" from its default of 3600, to 3 and then re-boot the Server
and all of the Requesters.


ΓòÉΓòÉΓòÉ 16.7. No valid file names were passed. ΓòÉΓòÉΓòÉ

Under OS/2 2.0, you can only drag files from a drive object, when doing
uploads. If you have a script as an object you can only drag that script if the
script resides in your script directory.