home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
archives
/
mskermit.tar.gz
/
mskermit.tar
/
mscustom.ini
< prev
next >
Wrap
Text File
|
1995-01-13
|
4KB
|
104 lines
GOTO GO ; FILE MSCUSTOM.INI
;
; SAMPLE individual customization file for MS-DOS Kermit 3.14.
; Make any desired changes, and then store this file in the same directory
; as your MSKERMIT.INI initialization file.
;
; Author: Christine M. Gianone, September 1992.
; Revised: June 1993 for version 3.13.
; Revised: September 1994 for version 3.14.
; Most recent update: Wed Sep 28 16:27:17 1994
;
:GO
if < \v(version) 314 -
stop 1 -
This MSCUSTOM.INI file may be used only with MS-DOS Kermit 3.14 or later.
echo Executing SAMPLE MS-DOS Kermit customization file, \v(cmdfile)...
echo Please edit this file to suit your needs and preferences.
COMMENT - Autodownload and autoupload are disabled by default, see KERMIT.UPD.
;
check term
if fail forward XFER
ec
ec Auto-upload and -download disabled.
ec Use SET TERMINAL APC ON to enable.
ec
; set terminal apc on ; Uncomment to enable this feature.
:XFER
COMMENT - Sample file transfer preferences.
;
set block 3 ; 16-bit CRC for strong error checking.
set window 4 ; 4 Window slots.
set receive packet-length 2000 ; Packet length is governed by receiver.
set control prefix all ; Prefix all control characters.
; Macros for transferring files in text and binary mode...
;
define bsend binary, send \%1 \%2 ; SEND in binary mode
define tsend text, send \%1 \%2 ; SEND in text mode
define bget binary, get \%1 ; GET in binary mode
define tget text, get \%1 ; GET in text mode
COMMENT - TCP/IP network configuration.
;
check tcp
if fail forward notcp
; If your site has a BOOTP server and your PC is registered in it, the only
; command you need here is the following SET TCP/IP ADDRESS BOOTP command.
; You will also need the SET TCP/IP DOMAIN command if your BOOTP server is
; not at RFC1395 level and/or does not provide your PC's hostname (substitute
; your PC's real hostname for FOO.BAR.EDU).
;
set tcp address BOOTP ; BOOTP will tell me my IP address
; SET TCP/IP DOMAIN FOO.BAR.EDU ; My network's domain name
; Otherwise, to use TCP/IP connections, replace the dummy values below with
; appropriate values for your network (DON'T MAKE THEM UP! - consult your
; network manager) and uncomment the SET TCP/IP commands.
;
; SET TCP/IP ADDRESS 123.123.123.123 ; My PC's numeric IP address
; SET TCP/IP SUBNETMASK 255.255.255.0 ; My physical network's subnet mask
; SET TCP/IP DOMAIN FOO.BAR.EDU ; My PC's fully qualified domain name
; SET TCP/IP GATEWAY 123.123.123.1 ; My network gateway's IP address
; SET TCP/IP PRIMARY-NAMESERVER 123.123.123.2 ; Primary nameserver's address
; SET TCP/IP SECONDARY-NAMESERVER 123.123.123.3 ; fallback nameserver address
; SET TCP/IP BROADCAST 255.255.255.255 ; My network's broadcast address
; Sample macro that shows how to use the session manager to access
; a particular host, called MYHOST. Make one of these for each host you
; commonly access. Then the first time you type "myhost" you'll get a new
; connection (and a session number), and subsequent times, the same session
; will be continued. This allows for easy session-switching from the
; MS-Kermit> prompt. You can also use Alt-n (\KnextSession) to toggle among
; sessions while in CONNECT mode. NOTE: TELNET is a macro that is defined
; in MSKERMIT.INI.
;
define myhost -
telnet myhost 23 vt320,-
if success assign myhost telnet \v(session)
:NOTCP
;
; Add you own macro definitions, key settings, color selections, etc, here,
; for example:
def _modem hayes ; Change this to your modem type, see MODEMS\READ.ME.
; set printer nul ; Uncomment this if you do NOT have a printer.
set port 1 ; Change if desired. If COM3 or 4, read KERMIT.BWR.
set speed 9600 ; Change if desired.
set flow xon/xoff ; Change to RTS/CTS if modem is configured for this.
check term
if fail end 0
set term type vt320 ; Change this if desired.
set term bytesize 7 ; Change to 8 if desired.
set term color 0 34 47 ; Terminal screen fore- and background colors.
set term under 0 33 47 ; Underscore simulation colors.
; take \v(inidir)keyboard\vt300.ini ; Uncomment for full VT320 key mappings.
; (End of MSCUSTOM.INI)