home *** CD-ROM | disk | FTP | other *** search
/ The World of Computer Software / World_Of_Computer_Software-02-387-Vol-3of3.iso / s / showm346.zip / SHOME346.ZIP / README.DOC < prev    next >
Text File  |  1993-03-06  |  47KB  |  1,246 lines

  1.  
  2.  
  3.                    
  4.                 
  5.                 
  6.                 "ShowMe Saver"
  7.                   Ver. 3.46
  8.             (c) Copyright  1992-93 Harold Schwartz
  9.  
  10.                   ALL RIGHTS RESERVED
  11.  
  12.                  Harold Schwartz
  13.                  P.O. Box 104482
  14.                  Jefferson City, MO  65110
  15.  
  16.  
  17.               Welcome to "ShowMe Saver"!!!
  18.  
  19.  
  20. "ShowMe Saver" is a screen saver, but with a difference...  "ShowMe Saver"
  21. is a 'message' screen saver.  "ShowMe Saver" protects your monitor from
  22. 'burn-in' and 'ghosting' damage caused by displaying the same screen image
  23. when your computer is left unattended for long periods of time.  It displays
  24. a randomly changing graphic image while showing a message of your choice.
  25. "ShowMe Saver" accomplishes this by watching for periods of keyboard and/or
  26. mouse inactivity.  If "ShowMe Saver" detects no keyboard and/or mouse 
  27. activity for a period of time which you select, it 'pops up', at random, one 
  28. of forty-four graphic image modules, each of which incorporates your message.
  29. Then, while a graphic saver image is popped up, "ShowMe Saver" again watches
  30. for keyboard and/or mouse activity.  If it detects a single keystroke or
  31. mouse button press, "ShowMe Saver" will pop down.
  32.  
  33. "ShowMe Saver" is a DOS screen saver.  It is NOT a Windows screen saver.
  34. "ShowMe Saver" will not pop up over a graphics application.  Since Windows is 
  35. a graphics application, "ShowMe Saver" disables itself and will not pop up 
  36. while Windows is running.  "ShowMe Saver" WILL pop up over nearly any DOS 
  37. text application.  When "ShowMe Saver" pops up over a text-based application,
  38. it 'saves' the application it popped up over, then 'restores' the application
  39. when it pops down.
  40.  
  41. The following sections will explain more of the details about how "ShowMe
  42. Saver" works and how to run "ShowMe Saver" on your system.
  43.  
  44.  
  45. --What is included in the "ShowMe Saver" package?...
  46.  
  47.     The "ShowMe Saver" package consists of six files:
  48.  
  49.                  SHOMESAV.EXE
  50.                  REGSHOME.DOC
  51.                   README.DOC
  52.                  SHOWCFIG.EXE
  53.                   README.1ST
  54.                  INSTALL.EXE
  55.  
  56.     SHOMESAV.EXE is the executable file which you run to
  57.     install "ShowMe Saver",  README.DOC is the documentation
  58.     file you are reading now, and SHOWCFIG.EXE is a config-
  59.     uration utility that allows the user to change the default
  60.     password as well as the hot key for the pop up configura-
  61.     tion window and the hot key for forcing immediate pop up
  62.  
  63.  
  64.  
  65.                                    
  66.                                    
  67.                                    
  68.                                    
  69.                                    
  70.                                     Page 2
  71.  
  72.  
  73.     of the saver.  "ShowMe Saver" is completely self-contained.
  74.     The only file required to install "ShowMe Saver" is
  75.     SHOMESAV.EXE.  The README.DOC file contains the necessary
  76.     instructions for configuring "ShowMe Saver" to fit your needs.
  77.     README.1ST contains instruction on the options for installing
  78.     ShowMe Saver and INSTALL.EXE is the installation utility pro-
  79.     vided to make it easier to get ShowMe Saver up and running on
  80.     your computer. REGSHOME.DOC is the registration form.
  81.  
  82.  
  83. --Is "ShowMe Saver"   ***FREE***   software?...
  84.  
  85.     The bad news is, "ShowMe Saver" is  NOT  ***FREE***.
  86.     The good news is, "ShowMe Saver" is  NOT  ***EXPENSIVE***.
  87.     The development of software is a very time-consuming process.
  88.     I have spent many, many hours developing "ShowMe Saver".  I
  89.     am releasing "ShowMe Saver" in the ShareWare market for a
  90.     very moderate price.  As ShareWare software, you are
  91.     entitled to try "ShowMe Saver" for two weeks to see if you
  92.     like it.  If you decide to keep "ShowMe Saver" you must
  93.     pay for it.  The price is $10.00 U.S.  NO SHIPPING, NO
  94.     HANDLING, just $10.00.  Included in the price is the latest
  95.     version of "ShowMe Saver".  The version that you receive will
  96.     NOT have the ShareWare screens which you encounter when
  97.     loading or using the pop-up window in the ShareWare version.
  98.     Once you have received the latest version, you will be entitled
  99.     to any updates at a reduced rate, typically one-half the 'new'
  100.     price.  Included in this package is a registration form called
  101.     REGSHOME.DOC.  Print this form and send it with your registra-
  102.     tion fee to the address indicated on the registration form or
  103.     shown at the beginning of this documentation.
  104.  
  105.  
  106. --What kind of system must I have to run "ShowMe Saver"?...
  107.  
  108.     "ShowMe Saver" requires an IBM PC/XT/AT/Portable or
  109.     IBM "compatible" computer running MS-DOS or PC-DOS.
  110.     "ShowMe Saver" requires an EGA or VGA monitor and a 
  111.     color video card that supports graphics.  Since 
  112.     "ShowMe Saver" uses page swapping routines in some 
  113.     of its saver modules, your system must be capable of 
  114.     multiple page swaps.  This generally limits you to EGA 
  115.     or VGA video modes.  "ShowMe Saver" is a swapping TSR
  116.     and therefore, will run best on systems with EMS
  117.     (expanded) or XMS (extended) memory.  However, EMS or
  118.     XMS are not a requirement since "ShowMe Saver" is cap-
  119.     able of swapping to a hard drive or floppy diskette
  120.     (more about the swapping feature later).  Version 3.01
  121.     and later also support mouse selection in the pop up
  122.     configuration window.
  123.  
  124.  
  125. --How do I install "ShowMe Saver"?...
  126.  
  127.     "ShowMe Saver" can be run from your hard drive or from a
  128.  
  129.  
  130.  
  131.  
  132.  
  133.  
  134.  
  135.                                     Page 3
  136.  
  137.  
  138.     floppy diskette.  The best choice is to run "ShowMe Saver"
  139.     from  a hard drive.  If you do not have a hard drive,
  140.     "ShowMe Saver" may be run from a floppy drive, however,
  141.     performance will suffer considerably.  In either case, you
  142.     have a couple of options to install "ShowMe Saver".
  143.  
  144.     The first and best option is to run the provided utility,
  145.     INSTALL.EXE.  INSTALL automates the installation process
  146.     and guides you through the steps to successfully get "ShowMe
  147.     Saver" up and running on your system.  To run the installation
  148.     program, simply make the drive that contains your source diskette
  149.     the current drive.  For instance, if you are installing from the
  150.     'A' drive, type A: and press <Enter>.  At the 'A' prompt just
  151.     type <Install>, press <Enter>, and follow the on-screen instruc-
  152.     tions.
  153.  
  154.     NOTE:  Remember to make a backup copy of the "ShowMe Saver" diskette
  155.     and put the original away in a safe place.
  156.  
  157.     Another option is to manually copy SHOMESAV.EXE to a directory on
  158.     the drive from which you plan to run the program.  The following
  159.     instructions assume that you have a hard drive and that you are
  160.     running "ShowMe Saver" from a subdirectory called SHOW.  If this is
  161.     not the case, you must alter the instructions accordingly.   For
  162.     example,
  163.  
  164.            COPY A:\SHOMESAV.EXE C:\SHOW\SHOMESAV.EXE
  165.  
  166.     will copy SHOMESAV.EXE to the SHOW subdirectory on your 'C'
  167.     drive.
  168.  
  169.     There are two ways to run "ShowMe Saver" once installed. The first
  170.     method (and the best method) is to edit your AUTOEXEC.BAT file to
  171.     install "ShowMe Saver" to memory each time you turn on your computer.
  172.     (This is done for you automatically if you install using the
  173.     INSTALL.EXE utility.)  To use this option you must add the line
  174.  
  175.             C:\SHOW\SHOMESAV.EXE [options]
  176.  
  177.     to your AUTOEXEC.BAT file (I'll explain the [options] part
  178.     later).  "ShowMe Saver" can usually tell if it is being
  179.     run on a system that is also running other TSR (Terminate
  180.     Stay Resident) programs (for instance, SideKick) and will
  181.     install itself accordingly.  There may be cases
  182.     where "ShowMe Saver" detects a problem when installing with
  183.     other TSR's and will give an appropriate error message.  In
  184.     these cases, "ShowMe Saver" may refuse to install itself
  185.     into memory.  If this happens, you can try changing the
  186.     location of the line in your AUTOEXEC.BAT file that is
  187.     loading "ShowMe Saver".  In cases where "ShowMe Saver"
  188.     refuses to pop up, this may also correct the problem.
  189.  
  190.     NOTE: Some software, notably those programs that play
  191.     loose with the DOS interrupts, may not allow "ShowMe Saver"
  192.     to function properly.
  193.  
  194.  
  195.  
  196.  
  197.  
  198.  
  199.  
  200.  
  201.                                     Page 4
  202.  
  203.  
  204.     The second method (not the best method) is to run
  205.     "ShowMe Saver" from the DOS prompt.  When using this
  206.     option, you must manually load "ShowMe Saver" each time
  207.     you start your computer.  For example, type
  208.  
  209.                C:\SHOW\SHOMESAV.EXE [options]
  210.  
  211.     and press <Enter>.
  212.  
  213.  
  214. --How much memory does "ShowMe Saver" use?...
  215.  
  216.     "ShowMe Saver" is a TSR, but don't be misled by the size
  217.     of SHOMESAV.EXE.  "ShowMe Saver" will swap most of itself
  218.     out of memory until it is called to pop up by keyboard or
  219.     mouse inactivity.  Once resident, "ShowMe Saver" leaves
  220.     only a small kernel of about 7K in memory; the rest of the
  221.     resident portion is optionally swapped to EMS (expanded)
  222.     memory, XMS (extended) memory or to disk.  If "ShowMe
  223.     Saver" finds EMS memory on your system, it will swap all
  224.     but the resident kernel to this memory. If "ShowMe Saver"
  225.     finds XMS memory on your system, it will use the XMS memory
  226.     for the swap location.  If your system has both EMS and XMS
  227.     memory available, "ShowMe Saver" will first try to swap to
  228.     the EMS memory.  If there isn't enough EMS memory available,
  229.     "ShowMe Saver" will then try to swap to the XMS memory.  If
  230.     there is no EMS or XMS memory available in sufficient quan-
  231.     tity, "ShowMe Saver" will swap itself to disk.  A file will
  232.     be created on your 'C' drive to hold the non-resident portion
  233.     of "ShowMe Saver" until it is time to pop up.  This file is
  234.     hidden and will be named SHOMESV1.$$$. It should not be deleted
  235.     if "ShowMe Saver" is running on your system.  The 'swap' files
  236.     also have the system attribute set to avert accidental deletion
  237.     while "ShowMe Saver" is running.
  238.  
  239.     In addition, when "ShowMe Saver" pops up it will swap the
  240.     session it is popping up over to either EMS memory, XMS memory,
  241.     or to a file on your 'C' drive named SHOMESV2.$$$.  In the section
  242.     showing command line options, I will explain how to force "ShowMe
  243.     Saver" to swap to disk, even though your system has EMS memory
  244.     and/or XMS memory.  Note, however, that best performance will
  245.     be obtained by a swap to EMS memory or XMS memory and is the
  246.     best option if available.
  247.  
  248.     NOTE: If your machine has extended memory and you want "ShowMe
  249.     Saver to use it for the swap location, you must have the DOS
  250.     extended memory manager, HIMEM.SYS, installed unless you are
  251.     running a third party memory manager, such as QEMM.  HIMEM.SYS
  252.     is installed by adding a line to your CONFIG.SYS file. See your
  253.     DOS manual for instructions on adding this line. "ShowMe Saver"
  254.     pops up and down much more quickly if it has EMS (expanded) or
  255.     XMS (extended) memory available.
  256.  
  257.     The easiest way to remove these temporary swap files from your
  258.     system is to unload "ShowMe Saver" with the /U command-line option.
  259.  
  260.  
  261.  
  262.  
  263.  
  264.  
  265.  
  266.  
  267.                                     Page 5
  268.  
  269.  
  270.     When "ShowMe Saver" is unloaded this way, it "cleans up" after
  271.     itself by deleting the temporary swap files.
  272.  
  273.  
  274. --What is the password utility included in "ShowMe Saver"?...
  275.  
  276.     There may be times that you do not want unauthorized personnel
  277.     tampering with your computer while you are away from your
  278.     desk or workstation.  Your machine can be 'locked' by "ShowMe
  279.     Saver".  If you enable the password option, a saver module
  280.     cannot be popped down unless you enter the password.  When a
  281.     key or mouse button is pressed, a small window appears and
  282.     asks for the password.  If you enter the correct password,
  283.     the saver will pop down normally.  However, if you cannot
  284.     give the correct password, the saver module will immediately
  285.     pop up again so that the system cannot be accessed.
  286.  
  287.     The password option can be configured in two ways.  The
  288.     password can be enabled by the inclusion of command line
  289.     switches.  In addition, you may enable and/or disable, as well
  290.     as change the password itself, via the Ctrl + Alt + M pop up
  291.     window.  These methods for configuring the password option are
  292.     outlined in the appropriate sections below.
  293.  
  294.     NOTE -- "ShowMe Saver" starts initially with a default
  295.     password of 102582.  If you change the password in the
  296.     Ctrl + Alt + M pop up window, the new password will only
  297.     be in effect as long as "ShowMe Saver" remains in memory.
  298.     When you reload "ShowMe Saver" the password will revert
  299.     to the default.  Included in the "ShowMe Saver" package
  300.     is a configuration utility called SHOWCFIG.EXE which
  301.     allows you to change the default password.  SHOWCFIG.EXE
  302.     must be run from the sub-directory where SHOMESAV.EXE is
  303.     located. A new default password of up to 8 characters may
  304.     be entered in this manner.  It is best to store the con-
  305.     figuration utility in a safe place along with your backup
  306.     copy of "ShowMe Saver".  If the SHOWCFIG.EXE file is left
  307.     in the location from which "ShowMe Saver" is run, there
  308.     is a possibility that unauthorized personnel could tamper
  309.     with the default password.
  310.  
  311.     If you enter a new password in the Ctrl + Alt + M pop up window,
  312.     the new password is IN ADDITION to the default password.  In
  313.     other words, when a keystroke or mouse button press tries to pop
  314.     down the saver module that is running, you have a choice of which
  315.     password to enter.  If you have entered a new password in the
  316.     Ctrl + Alt + M window, that new password AS WELL AS the default
  317.     password will allow you to pop the saver down.  The reason for
  318.     allowing this option is so that unauthorized personnel cannot use
  319.     the Ctrl + Alt + M pop up window to lock you out of your own system.
  320.  
  321.     A note of caution is in order:
  322.  
  323.     If you use the password option, DO NOT FORGET YOUR PASSWORD,
  324.     especially if you are starting "ShowMe Saver" from your auto-
  325.  
  326.  
  327.  
  328.  
  329.  
  330.  
  331.  
  332.  
  333.                                     Page 6
  334.  
  335.  
  336.     exec.bat file with the immediate popup feature enabled.  Should
  337.     you forget your password, you must have a bootable floppy disk-
  338.     ette available in order to regain control of your own system.
  339.  
  340.  
  341. --What are the command line options for running "ShowMe Saver"?...
  342.  
  343.     Typing SHOMESAV /? or SHOMESAV -? at the DOS prompt will
  344.     display a help screen showing the various command line
  345.     options available when starting "ShowMe Saver".  The
  346.     options are as follows:
  347.  
  348.  
  349.        /Bx         used to prevent screen flash (1 = min.(default) 15 = max.)
  350.        /Cnumber    specifies Comm Port (1 = Com1  to 4 = Com4)
  351.        /D          specifies to load saver in 'disabled' status
  352.        /E          indicates not to use EMS (expanded) memory
  353.        /F          indicates not to use XMS (extended) memory
  354.        /Ix         causes immediate popup in x secs. with default password
  355.        /L          indicates to enable default password
  356.        /Mtext      specifies text for screen saver message
  357.        /N          indicates not to use swapping
  358.        /O          causes saver modules to pop up in order
  359.        /Ppathname  specifies pathname to use for swapping
  360.        /Rx         causes saver to cycle 'x' times thru each module
  361.        /Scodes     specifies saver modules to enable (A - Z,[,\,],^,_,`,a - l)
  362.        /Ttime      specifies time to pop up saver (1 to 60 min.)
  363.        /U          removes ShowMe Saver from memory
  364.        /X          specifies to use XMS (extended) memory first if avail.
  365.        /?          displays this help screen
  366.  
  367.     The proper use of these command line options is:
  368.  
  369.                 SHOMESAV /x
  370.  
  371.     where "x" represents one of the characters shown on the
  372.     help screen.  Note that /x  or -x are both acceptable.
  373.  
  374.     NOTE: If multiple options are included on the command line, you
  375.     must separate each option with a space.
  376.  
  377.     A description of each follows:
  378.  
  379.     /Bx        -- On some CPU/monitor combinations, especially
  380.               newer, higher speed machines, some of the
  381.               graphic modules may exhibit an annoying flash.
  382.               This flash is due partly to the type of monitor
  383.               and partly to the speed of the CPU. This option
  384.               can be used to minimize the flash. It can only
  385.               be entered as a command-line option when
  386.               starting ShowMe Saver. The effect of the option
  387.               is to slow things down somewhat on some of the
  388.               modules. A value of 1 (which is the default
  389.               value) has little effect and a value of 15 has
  390.               the maximum effect. If you experience flash on
  391.  
  392.  
  393.  
  394.  
  395.  
  396.  
  397.  
  398.  
  399.                                     Page 7
  400.  
  401.  
  402.               some of the modules, experiment with various
  403.               values to find one that works best on your
  404.               system.
  405.  
  406.     /Cnumber   -- If you use a communications program and you do
  407.               not want "ShowMe Saver" to pop up while you
  408.               are in the program, then you should use this
  409.               command line option to tell "ShowMe Saver"
  410.               which serial port your modem is using.  This 
  411.               keeps "ShowMe Saver" from popping up when you
  412.               might be doing a data transfer through your
  413.               communications program.  For instance, a /C1
  414.               command line option would tell ShowMe Saver
  415.               that your communications program is configured
  416.               to use Comm Port 1 or a /C3 command line option
  417.               would tell ShowMe Saver that you are using          
  418.               Comm Port 3 for communicaions.
  419.  
  420.               (NOTE: Some communications programs may not
  421.               leave your modem in a configuration that is
  422.               recognized by "ShowMe Saver". Should this be
  423.               the case, you should not use the /C option.
  424.               Instead, use the pop-up configuration window
  425.               to disable "ShowMe Saver" while you are in
  426.               the communication program, then reenable
  427.               after you have exited the program.)
  428.  
  429.     /D         -- Use this option if you want "ShowMe Saver" to
  430.               start in the 'disabled' mode.  If started with
  431.               this command line switch, you must manually
  432.               enable "ShowMe Saver" with the shift-shift hot
  433.               key or in the Ctrl + Alt + M pop up window.
  434.  
  435.     /E         -- This option will tell "ShowMe Saver" not to
  436.               use EMS memory when it installs.  This forces
  437.               "ShowMe Saver" to swap to XMS memory or to
  438.               disk.  If the /E as well as the /F options are
  439.               included on the command line, "ShowMe Saver"
  440.               will be forced to swap to disk. (See note above
  441.                       about configuring XMS memory)
  442.  
  443.     /F         -- This option will tell "ShowMe Saver" not to
  444.               use XMS memory when it installs. This forces
  445.               "ShowMe Saver" to swap to EMS memory or to
  446.               disk.  By including this option as well as the
  447.               /E option, you may force a swap to disk.
  448.  
  449.     /Ix        -- This option will cause 'ShowMe Saver" to pop up
  450.               immediately (in 'x' seconds) after loading, using
  451.               the default password.  Use of this option will allow
  452.               you to run "ShowMe Saver" from your AUTOEXEC.BAT
  453.               file with an immediate popup.  This enables you to
  454.               protect your system from tampering by unauthorized
  455.               personnel. In order to use this option, you should
  456.               set 'x' to a relatively low number of seconds so
  457.  
  458.  
  459.  
  460.  
  461.  
  462.  
  463.  
  464.  
  465.                                     Page 8
  466.  
  467.  
  468.               that "ShowMe Saver" pops up immediately after the
  469.               machine has completed its boot sequence.  In order
  470.               to use this option properly you must time your boot
  471.               sequence and insure that the number of seconds that
  472.               you specify in the /I option is somewhat GREATER
  473.               than the maximum time your machine takes to boot up.
  474.               This is to keep "ShowMe Saver" from trying to pop up
  475.               before the boot sequence is complete.
  476.  
  477.               WARNING -- If you use this option, be certain that
  478.               you do not forget the default password.  If you
  479.               forget the default password, you will lock yourself
  480.               out of your own system.  You should use this option
  481.               ONLY if you are CERTAIN that you have a bootable
  482.               floppy diskette stored in a safe place. Do NOT use
  483.               this option if you are running "ShowMe Saver" from
  484.               a floppy diskette.
  485.  
  486.     /L         -- Inclusion of this option causes "ShowMe Saver" to
  487.               pop up with the default password enabled.  The time
  488.               to pop up will be 5 minutes unless you also include
  489.               the /T option, in which case the time to pop up will
  490.               be the time you specify with the /T option.
  491.  
  492.     /Mtext     -- "ShowMe Saver" defaults to a saver message of
  493.               'SHOWME SAVER' unless a different message is
  494.               given as a command line option, as in
  495.  
  496.                       SHOMESAV /MJake
  497.  
  498.               in which case the message displayed would be
  499.               'Jake'.  A maximum length of twelve characters
  500.               is allowed and any longer message will be
  501.               truncated.  Messages entered from the command
  502.               line may contain up to four spaces. (HINT: If
  503.               you prefer that no message be displayed, enter
  504.               /m with no message as a command line option.)
  505.  
  506.     /N         -- "ShowMe Saver" will first try to use EMS
  507.               memory for swapping.  If EMS memory is not            
  508.               available on the system, "ShowMe Saver" will 
  509.               try to swap to XMS memory (see note above). If
  510.                       XMS memory is not available, "ShowMe Saver" will
  511.                       then swap to disk.  In the event that you do not
  512.                       want "ShowMe Saver" to swap to EMS, XMS, or to
  513.                       disk, you may use this option to disable swapping
  514.               entirely.  However, a word of caution.  If you
  515.               use this option, "ShowMe Saver" will take a
  516.               large bite out of low memory.  Depending upon how
  517.               your system is configured, this may not leave
  518.               enough room in low memory to run many programs.
  519.  
  520.     /O         -- If you want the saver modules to pop up in a
  521.               specific order, you should include this command
  522.               line option.  If you have specified certain
  523.  
  524.  
  525.  
  526.  
  527.  
  528.  
  529.  
  530.  
  531.                                     Page 9
  532.  
  533.  
  534.               saver modules to enable using the /Scodes option
  535.               described below, the /O option causes "ShowMe Saver"
  536.               to cycle through the modules in the order in which
  537.               you listed them in the /S option.  If you did not
  538.               include the /S option on the command line, this
  539.               option causes the saver modules to pop up in the
  540.               order a through `.  This option as well as the /S
  541.               option discussed below can be configured in the
  542.               Ctrl + Alt + M pop up window.
  543.  
  544.     /Ppathname -- The default pathname used by "ShowMe Saver"
  545.               is C:\.  If you wish "ShowMe Saver" to swap
  546.               to a different location, a different pathname
  547.               must be specified as in
  548.                                     
  549.                      /PD:\SHOW\
  550.  
  551.               which would cause "ShowMe Saver" to swap to
  552.               the SHOW subdirectory on your 'D' drive.  
  553.               This option only has an effect, of course,
  554.               if "ShowMe Saver" is not using EMS or XMS 
  555.               memory for swapping.  Be certain that the path 
  556.               that you specify is valid.  If the 'SHOW' sub-
  557.               directory, as shown in the above example, does
  558.               not exist, "ShowMe Saver" will not swap itself
  559.               out of memory when it installs.  The effect 
  560.               would be the same as if you had included the     
  561.               /N option on the command line.
  562.  
  563.     /Rx        -- By default "ShowMe Saver" loads so that each
  564.               module runs continuously after it is popped up.
  565.               After that module pops down by seeing a keystroke
  566.               or a mouse button press, it does not pop up again
  567.               until its 'turn' comes up again according to where 
  568.               it is in the list of modules you have enabled.  If
  569.               you want "ShowMe Saver" to continuously cycle
  570.               through the list of modules you have enabled, then
  571.               you can include this command line option. For 
  572.               example               
  573.  
  574.                       SHOMESAV /R5 /SAEIOU
  575.  
  576.               would cause "ShowMe Saver" to cycle through
  577.               modules A, E, I, O, and U five times each, and
  578.               then start over at module A again. (This assumes that
  579.               you have "ShowMe Saver" configured to use the enabled
  580.               modules 'in order'.  If configured to run the modules
  581.               in 'random' order, the modules would be selected
  582.               randomly and run five times each.)  "ShowMe Saver"
  583.               can be configured to cycle through each module
  584.               from 1 to 15 times.  This option may also be con-
  585.               figured from the pop up configuration window.
  586.  
  587.     /Scodes    -- If you do not include the /S command line parameter
  588.               when starting, "ShowMe Saver" by default loads with
  589.  
  590.  
  591.  
  592.  
  593.  
  594.  
  595.  
  596.  
  597.                                     Page 10
  598.  
  599.  
  600.               all 44 (A thru X, [, \, ], ^, _, `, a thru l ) saver
  601.               modules enabled.  If you want certain saver modules
  602.               to be enabled on start-up, you may include this option
  603.               to enable as many as you wish.  For example,
  604.                    
  605.                    SHOMESAV /SAC\FG[P
  606.  
  607.               would start "ShowMe Saver" with the A, C, \, F, 
  608.               G, [, and P modules enabled.  At any time after
  609.               start-up you can change the enabled-modules list 
  610.               in the Ctrl + Alt + M pop up window.  The module 
  611.               codes are listed below. (Note that the letters
  612.               used with the /S switch may be both upper AND
  613.               lower case, eg., 'A' signfies the module Orbs and
  614.               'a' signifies the module Twirl.)
  615.  
  616.  
  617.                   GRAPHIC SAVER MODULES
  618.  
  619.           A - Orbs   B - Pac Man   C - Fade Out   D - Air Mail
  620.           E - Wormy  F - Fade In   G - Sine Fun   H - Black Hole
  621.           I - Boxes  J - 3D Bars   K - Text Pop   L - Whole Sine
  622.           M - Lines  N - Circles   O - Twinkler   P - Random Lines
  623.           Q - Train  R - Drained   S - Cherry B   T - Double Paper
  624.           U - Boing  V - Planets   W - Saturn V   X - Bounce Names
  625.           Y - Mower  Z - Vortex    [ - Rolling    \ - Passing Thru
  626.           ] - Quake  ^ - Stormy    _ - Fireworks  ` - Space Flight
  627.           a - Twirl  b - Spider    c - Scotch     d - Starstruck
  628.           e - Flags  f - Watch     g - Marquee    h - Pulsator
  629.           i - Snow   j - Blanker   k - Searching  l - Kaleidoscope
  630.  
  631.  
  632.     /Tnumber   -- The default pop up time used by "ShowMe Saver"
  633.               is 5 minutes.  If you would like a different
  634.               pop up time, you may set it by including a
  635.               command line option such as
  636.              
  637.                        /T20
  638.  
  639.               This would cause "ShowMe Saver" to pop up after
  640.               20 minutes of keyboard or mouse inactivity.  The
  641.               pop up time may be set from 1 to 60 minutes.
  642.  
  643.        /U          -- This option is used to disable "ShowMe Saver" and
  644.               remove it from memory, if it is safe to do so.  If
  645.               "ShowMe Saver" is running on your system, it may be 
  646.               run again with the /U option, as in
  647.                     
  648.                      SHOMESAV /U
  649.  
  650.               to remove "ShowMe Saver" from memory and return all
  651.               memory used by "ShowMe Saver" to the system.  If
  652.               you have installed other TSR's after loading "ShowMe
  653.               Saver", you will probably not be able to unload 
  654.               "ShowMe Saver" until you have first unloaded those
  655.  
  656.  
  657.                                    
  658.  
  659.  
  660.  
  661.  
  662.  
  663.                                     Page 11
  664.  
  665.  
  666.               TSR's.  ShowMe Saver detects this and will refuse to
  667.               unload the resident copy.  When unloaded from memory
  668.               with this option, "ShowMe Saver" deletes any tempo-
  669.               rary swap files it may have created.
  670.  
  671.     /?         -- Displays the help screen.
  672.  
  673.  
  674.      NOTE  -- "ShowMe Saver" automatically watches for printer
  675.           activity.  If you are sending a long print job to
  676.           a printer, "ShowMe Saver" will not pop up until the
  677.           entire print job has been sent.
  678.  
  679.     More than one command line option may be used when starting
  680.     "ShowMe Saver".  For example
  681.  
  682.          SHOMESAV /MJulie Ann /E /PD:\saver /t1 /c2
  683.  
  684.     would set the saver message to 'Julie Ann', tell "ShowMe
  685.     Saver" NOT to use EMS memory for swapping, set the location  
  686.     for the swapping files to the 'SAVER' directory of drive 'D',
  687.     set the pop up time to 1 minute, and tell "ShowMe Saver" not
  688.     to pop up if you are in a communication program using a modem
  689.     that is using serial port 2.
  690.  
  691.     Note that "/" or "-" may be used interchangeably on the command
  692.     line to specify options. An examination of the example given
  693.     above shows the proper use of spaces between each option used.
  694.     There must be a space between each option or ShowMe Saver will
  695.     only "see" the first option. Each option must begin with either
  696.     an '/' or an '-' and must end with a space (the spaces within a
  697.     message when using the /M option are ignored).
  698.  
  699.  
  700. --Can I change parameters after installing "ShowMe Saver"?...
  701.  
  702.     Six parameters can be changed after "ShowMe Saver" has been
  703.     installed.  The message for display can be changed at any
  704.     time.  A hot key combination will pop up a configuration window
  705.     which will allow you to change the message.  The window will
  706.     show the message currently being used and will prompt for a
  707.     different message.  When entering a new message in this
  708.     manner, any number of spaces may be included, however,
  709.     the absolute maximum of twelve characters (including spaces)
  710.     is still enforced as mentioned above. (HINT: If you do not want
  711.     a message displayed, enter no text at the prompt). The hot key 
  712.     combination to pop up the message window is CTRL + ALT + M.  
  713.     (Hold down the 'Ctrl' and 'Alt' keys and press the 'M' key.)
  714.  
  715.     If you want to change the pop up time after "ShowMe Saver" is
  716.     installed, you may set the time from 1 to 60 minutes by using
  717.     the Ctrl + Alt + M pop up window.  The window shows the 
  718.     current pop up time and prompts for a new time.
  719.  
  720.     There may be times when you want to disable "ShowMe Saver"
  721.  
  722.  
  723.  
  724.  
  725.  
  726.  
  727.  
  728.  
  729.                                     Page 12
  730.  
  731.  
  732.     temporarily after it is installed.  For instance, you may be 
  733.     running a text-based DOS application which cannot be 
  734.     interrupted.  The window which pops up when the Ctrl + Alt + M 
  735.     hot key combination is pressed also allows you to enable and 
  736.     disable "ShowMe Saver".  The window shows the current saver 
  737.     status (on or off) and allows you to change the status.
  738.  
  739.     The password utility may also be configured from the pop up
  740.     window.  The password may be enabled and disabled or the
  741.     password can be changed to anything you desire, up to a maximum
  742.     of eight characters.  Note that many keys may be included in
  743.     the password that are not normally associated with text.  For
  744.     instance, an 'Esc' or 'Backspace' may be included in the pass-
  745.     word.  Use of these keys produce passwords that are especially
  746.     difficult to 'crack'.
  747.                
  748.     "ShowMe Saver" by default starts with all 44 saver modules
  749.     enabled.  If you only wish certain modules to pop up, you
  750.     may enable them from the pop up window.  You may enable from
  751.     1 to 44 (A to X, [,\,],^,_,`, a to l) at any time.   The names
  752.     for each module are shown in the pop-up 'pick' window shown
  753.     below which appears when the '(E)nable' option is selected.
  754.  
  755.  
  756.       ----------------------------------------------------------
  757.      | -----------------> MODULE SELECTION <------------------- |
  758.      ||--------------------------------------------------------||
  759.      ||  <Orbs>      Pac Man      Fade Out     <Air Mail>      ||
  760.      ||  <Wormy>     Fade In      Sine Fun      Black Hole     ||
  761.      ||   Boxes     <3D Bars>    <Text Pop>     Whole Sine     ||
  762.      ||   Lines      Circles      Twinkler      Random Lines   ||
  763.      ||   Train      Drained      Cherry B      Double Paper   ||
  764.      ||  <Boing>     Planets      Saturn V      Bounce Names   ||
  765.      ||   Mower     <Vortex>     <Rolling>     <Passing Thru>  ||
  766.      ||   Quake      Stormy       Fireworks     Space Flight   ||
  767.      ||   Twirl     <Spider>     <Scotch>      <Starstruck>    ||
  768.      ||   Flags      Watch        Marquee       Pulsator       ||
  769.      ||   Snow       Blanker      Searching     Kaleidoscope   ||
  770.      ||--------------------------------------------------------||
  771.      | - CTRL-ENTER = Toggle All ----- SPACEBAR = Toggle Item - |
  772.       ----------------------------------------------------------
  773.  
  774.  
  775.     An examination of the example pick window above shows that
  776.     some of the module names in the window are enclosed in
  777.     brackets (for example, <Orbs> ).  The brackets indicate that
  778.     this module is selected for pop up.  As few as one of the
  779.     modules may be 'selected' or all of them may be selected.
  780.     When you first enter this pick window, if you wish to change
  781.     the modules selected for pop up, you must FIRST deselect all
  782.     of the modules.  As shown in the lower left of the window
  783.     frame, pressing <CTRL-ENTER> will deselect all modules or,
  784.     placing the mouse cursor on the <CTRL-ENTER> area and pressing
  785.     the left button will do the same thing.  Then, you may
  786.     select those modules that you wish to be enabled. If you wish
  787.  
  788.  
  789.  
  790.  
  791.  
  792.  
  793.  
  794.  
  795.                                     Page 13
  796.  
  797.  
  798.     all modules to be enabled but in no specific order, the
  799.     <CTRL-ENTER> key combination can be used to toggle all items
  800.     off then back on.
  801.  
  802.     Modules are selected in one of two ways.  The highlight bar
  803.     may be moved around the window using the arrow keys and, when
  804.     a selection is highlighted, pressing the spacebar will toggle
  805.     that item on.  If you have a mouse installed, double-clicking
  806.     an item with the left button will also select the item.  When
  807.     selecting modules, if you want them to pop up in a specific
  808.     order, they must be 'selected' in that order.  However, if you
  809.     decide to change the order of pop up, you should deselect all
  810.     items and start the selection process over.
  811.  
  812.     Once your selection is complete, pressing <ENTER>, <ESC>, or
  813.     clicking the right mouse button will exit the pick window and
  814.     enable for pop up all of the modules that were selected.
  815.     Once you begin to use the 'pick' window to enable modules, you
  816.     will quickly become accustomed to it, whether you are using the
  817.     keyboard or a mouse.
  818.  
  819.     The '(O)rder' option toggles between 'In Order' and 'Random'.
  820.     'In Order' indicates that the saver modules shown as 'Enabled'
  821.     will pop up in the order shown.  Once you have cylcled through
  822.     the 'Enabled' list, pop up returns to the start of the list.
  823.  
  824.     'Random' indicates that the saver modules enabled will pop up 
  825.     at random.
  826.  
  827.     The '(C)ycling of saver modules' option configures 'ShowMe Saver"
  828.     to cycle through the modules you have enabled in the module
  829.     selection window.  If the 'Module cycling' option is set to 'YES'
  830.     as shown in the upper portion of the pop up configuration window,
  831.     selecting 'C' or clicking on the option with the mouse will set
  832.     the cycling option to 'NO' which indicates that once a module pops
  833.     up, it will stay up until popped down.  If the 'Module cycling'
  834.     option is set to 'NO', selecting 'C' or clicking on the option
  835.     with the mouse will give a prompt to 'Enter the number of cycles
  836.     (1 to 15)...'. You may then enter the number of times you want each
  837.     module to run before it pops down and the next one pops up.
  838.     
  839.     At any point while in the pop-up window, you may exit and leave
  840.     all parameters unchanged by pressing <Esc>.
  841.  
  842.     The configuration pop up window now supports a mouse.  All of 
  843.     the options available can be accessed with either the keyboard
  844.     or the mouse.  If you have a mouse installed on your system,
  845.     it will be detected automatically and will become active when
  846.     the pop up window is called.  A little experimentation will
  847.     show the capabilities of the mouse.  In general, the left 
  848.     button is used for selection of options.  The right button is
  849.     used as either the <ESC> key if you are in the main window, or
  850.     the <ENTER> key if you are in the secondary module selection
  851.     window.
  852.  
  853.  
  854.  
  855.  
  856.  
  857.  
  858.  
  859.  
  860.  
  861.                                     Page 14
  862.  
  863.  
  864.     There are two additional hot-key combinations available while
  865.     "ShowMe Saver" is installed:
  866.  
  867.     Shift + Shift -- Depressing both the left and right 'shift' keys 
  868.              allows you to quickly disable "ShowMe Saver".  
  869.              The effect is the same as if you used the pop
  870.              up window to disable "ShowMe Saver", but much 
  871.              faster.  Depressing shift-shift again will
  872.              reenable "ShowMe Saver", thus the shift-shift
  873.              hot key acts as a 'toggle' to turn "ShowMe
  874.              Saver OFF and/or ON quickly.  If you forget
  875.              what the present status is, just pop up the
  876.              configuration window and check the 'STATUS'
  877.              entry.
  878.  
  879.     Ctrl + Alt + Rt. Shift -- Pressing the right 'Shift' key while
  880.                   holding down the 'Control' and 'Alt'
  881.                   keys will force "ShowMe Saver" to pop
  882.                   up immediately.
  883.  
  884.     (NOTE:  The three hot key combinations discussed so far are the
  885.         default hot keys enabled when you get "ShowMe Saver".
  886.         See the section below entitled "Can I change the hot keys
  887.         used by "ShowMe Saver?" for information on changing them.)
  888.  
  889.  
  890. --What are the saver modules used in "ShowMe Saver"?...
  891.  
  892.     The current version of "ShowMe Saver" contains forty-four
  893.     different saver image modules. They are:
  894.  
  895.  
  896.        Orbs -A- Your message popping to the screen on spheres
  897.             of various colors and shapes.
  898.  
  899.        PacMan -B- Your message being gobbled up by PacMan and
  900.               then spit back at you.
  901.  
  902.        FadeOut -C- Your message disintegrating.                      
  903.  
  904.        Air Mail -D- Your message being towed by the ShowMe
  905.             Saver airplane.
  906.  
  907.        Wormy -E- Your message being carried by the "ShowMe"
  908.              wooly worm.
  909.  
  910.        Fade In -F- Your message gradually fading in.
  911.  
  912.        Sine Fun -G- Your message disappearing in a multicolored
  913.                tunnel of sine waves.
  914.  
  915.        Black Hole -H- Your message being sucked down a black hole
  916.               along with an entire solar system.
  917.  
  918.  
  919.  
  920.  
  921.  
  922.  
  923.  
  924.  
  925.  
  926.  
  927.                                     Page 15
  928.  
  929.  
  930.  
  931.        Boxes -I- Your message displayed in various formats
  932.              while being blasted by multicolored cubes.
  933.  
  934.        3D Bars -J- Your message popping up on vari-colored 3D
  935.                cubes in many colors.
  936.  
  937.        TextPop -K- Your message popping to the display
  938.                in various sizes and at random
  939.                locations.
  940.  
  941.        Whole Sine -L- Your message under a changing pattern of
  942.               circles, boxes, and ellipses.
  943.  
  944.        Lines -M- Your message being displayed over random
  945.              lines in various colors and locations.
  946.  
  947.        Circles -N- Your message displayed in various
  948.                multi-colored circles and spheres.
  949.  
  950.        Twinkler -O- Your message disappearing under an
  951.             exploding display of colored stars.
  952.  
  953.        Random Lines -P- Your message being covered and
  954.                uncovered by a random line in a
  955.                continuously changing color and
  956.                direction.
  957.  
  958.        Train -Q- Your message being hauled by the "ShowMe" train.
  959.  
  960.        Drained -R- Your message slowly going down the drain.
  961.  
  962.        Cherry B -S- Your message exploding on a "Cherry Bomb"
  963.             firecracker.
  964.  
  965.        Double Paper -T- Your message displayed between two
  966.                multicolored bands of paper.
  967.  
  968.        Boing -U- Your message bouncing around the screen.
  969.  
  970.        Planets -V- Your message on the surface of planets
  971.                floating through space.
  972.  
  973.        Saturn V -W- A Saturn V rocket crashing into your
  974.             message in space.
  975.               
  976.        Bounce Names -X- Your message bouncing onto the screen                   
  977.                 in various colors and at various
  978.                 locations.
  979.  
  980.        Mower -Y- Your message being uncovered by a couple of
  981.              hard-working fellows.
  982.  
  983.        Vortex -Z- Your message displayed on the fringes of a
  984.               swirling vortex.
  985.              
  986.                                     
  987.  
  988.  
  989.  
  990.  
  991.  
  992.  
  993.                                     Page 16
  994.  
  995.  
  996.        Rolling -[- Your message rolling through the screen from
  997.                both directions.
  998.  
  999.        Passing Thru -\- Your message sliding across the screen
  1000.                 from every direction.
  1001.  
  1002.        Quake -]- Your message shaken up by an earthquake.
  1003.  
  1004.        Srormy -^- Your message appearing beneath flashes of
  1005.               lightening in a dark sky.
  1006.  
  1007.        Fireworks -_- Your message on a billboard with multi-
  1008.              colored fireworks bursting overhead.
  1009.  
  1010.        Space Flight -`- Your message speeding by as you hurtle
  1011.                 through space.
  1012.  
  1013.        Twirl -a- Your message being surrounded by brightly
  1014.              colored swirling designs.
  1015.  
  1016.        Spider -b- The "ShowMe" spider slowly spinning a multi-
  1017.               colored web around your message.
  1018.  
  1019.        Scotch -c- Plaid patterns slowly woven across the screen
  1020.               around your message.
  1021.  
  1022.        Starstruck -d- Your message in the marquee lights with
  1023.               the stars.
  1024.  
  1025.        Flags -e- Your message popping to the screen on various
  1026.              "ShowMe Saver" flags along with "Old Glory".
  1027.  
  1028.        Watch -f- The "ShowMe Saver" watch, personalized with
  1029.              your message, bouncing around the screen.
  1030.  
  1031.        Marquee -g- Your message exploding onto the screen amid
  1032.                the marquee lights.
  1033.  
  1034.        Pulsator -h- Your message coming and going and coming and
  1035.             going.
  1036.  
  1037.        Snow -i- Gently falling snowflakes cascading around your
  1038.             message.
  1039.  
  1040.        Blanker -j- Just a plain Jane blanker... No message, just
  1041.                a blank screen. Included because of numerous
  1042.                requests.
  1043.  
  1044.        Searching -k- Searchlights constantly scanning the screen
  1045.              for you message.
  1046.  
  1047.        Kaleidoscope -l- Your message displayed above and below a
  1048.                 kaleidoscope of color.
  1049.  
  1050.  
  1051.  
  1052.  
  1053.  
  1054.  
  1055.  
  1056.  
  1057.  
  1058.  
  1059.                                     Page 17
  1060.  
  1061.  
  1062. --Can I change the hot keys used by "ShowMe Saver?...
  1063.  
  1064.     Yes.  Since there are many applications that make the use of hot
  1065.     keys, a conflict may occur between the hot keys used by "ShowMe
  1066.     Saver" and those used by an application you may be running.  If
  1067.     this is the case, the default configuration utility, SHOWCFIG.EXE,
  1068.     may be used to change two of the default hot-key combinations.
  1069.     Simply place SHOWCFIG.EXE in the same directory as SHOMESAV.EXE,
  1070.     MAKE THAT DIRECTORY THE CURRENT DIRECTORY, and start the configura-
  1071.     tion program by typing 'showcfig' and pressing 'enter'. Use of the
  1072.     utility is relatively intuitive.  You are initially presented with
  1073.     five options:
  1074.  
  1075.           <C> to change hot key for pop-up configuration window
  1076.           <I> to change hot key for immediate pop up
  1077.           <P> to change default password
  1078.           <S> to save configuration changes
  1079.           <ESC> to quit without saving changes.
  1080.  
  1081.     If you wish to change the hot key for immediate pop up, press 'I'
  1082.     and you will be presented with another menu allowing you to select
  1083.     the hot key you desire:
  1084.  
  1085.            1)  CTRL-ALT-RIGHT SHIFT
  1086.            2)  ALT-LEFT SHIFT
  1087.            3)  CTRL-LEFT SHIFT
  1088.            4)  NONE
  1089.  
  1090.     Option 1) is the default for this hot key when you get "ShowMe Saver".
  1091.     You are allowed to select any one of the three hot keys shown or to
  1092.     disable the immediate pop-up hot key entirely.
  1093.  
  1094.     If you wish to change the hot key for the pop up configuration
  1095.     window, press 'C' and you will be presented with another menu which
  1096.     allows you to select the hot key you want:
  1097.  
  1098.            1)  CTRL-ALT-M
  1099.            2)  CTRL-LEFT SHIFT-HOME
  1100.            3)  CTRL-DEL
  1101.            4)  ALT-RIGHT SHIFT-*
  1102.            5)  CTRL-LEFT SHIFT->
  1103.            6)  CTRL-BACKSPACE
  1104.  
  1105.     Option 1) is the default for this hot key when you get "ShowMe Saver".
  1106.  
  1107.     You are allowed to select any one of the six hot keys shown.
  1108.     After making your selections, you must choose the
  1109.  
  1110.            <S> to save configuration changes
  1111.  
  1112.     option to save your changes.  If you press <ESC>, you will exit the
  1113.     configuration program without saving any of the changes you made.
  1114.  
  1115.     (NOTE: SHOWCFIG.EXE is NOT compatible with versions of "ShowMe
  1116.      Saver" earlier than version 3.01.)
  1117.  
  1118.  
  1119.  
  1120.  
  1121.  
  1122.  
  1123.  
  1124.  
  1125.                                     Page 18
  1126.  
  1127.  
  1128. --Is "ShowMe Saver" compatible with Microsoft Windows?...
  1129.  
  1130.     Yes.  We have encountered no compatibility problems when switching
  1131.     between DOS and 'Windows'.  As mentioned above, if you are currently
  1132.     running a 'Windows' session, "ShowMe Saver" will disable itself and
  1133.     will not attempt to pop up.  If you are also running a 'Windows'
  1134.     screen saver, it will continue to operate normally while you are in 
  1135.     the Windows session.  When you leave the 'Windows' session and return 
  1136.     to DOS, "ShowMe Saver"  will re-enable itself and continue to pop up 
  1137.     normally.
  1138.  
  1139.  
  1140. --What do I get with the registered version of "ShowMe Saver"?...
  1141.  
  1142.        You will get the latest version of "ShowMe Saver".  This version
  1143.        will NOT have the opening ShareWare screen NOR will it have the
  1144.        ShareWare screens that you see when you exit the pop-up window.
  1145.                                 
  1146.  
  1147. --How do I register "ShowMe Saver"?...
  1148.  
  1149.     The easiest way to register "ShowMe Saver" is to print out the
  1150.     registration form in REGSHOME.DOC, fill it out and send it, along
  1151.     with the $10.00 registration fee, to
  1152.  
  1153.                Harold Schwartz
  1154.                P.O. Box 104482
  1155.                Jefferson City, MO  65110  
  1156.  
  1157.     Printing the form is easy. Just type
  1158.  
  1159.               COPY REGSHOME.DOC PRN
  1160.                        
  1161.     and press <enter>.  Send in the completed form and $10.00 U.S.
  1162.     to the address given above.
  1163.  
  1164.  
  1165.            
  1166.            Thanks and ***ENJOY*** "ShowMe Saver".
  1167.  
  1168.  
  1169.  
  1170. --Acknowledgements...
  1171.  
  1172.     "ShowMe Saver" was written in Turbo Pascal 6.0 and assembly
  1173.     language.
  1174.  
  1175.     In this documentation, references are made to several products:
  1176.     
  1177.     Turbo Pascal and Sidekick are registered trademarks of Borland
  1178.     International.
  1179.     QEMM is a registered trademark of Quarterdeck Office Systems.
  1180.     DOS refers to either PC-DOS or MS-DOS.
  1181.     PC-DOS is a registered trademark of International Business
  1182.     Machines Corporation.
  1183.  
  1184.  
  1185.  
  1186.  
  1187.  
  1188.  
  1189.  
  1190.  
  1191.                                     Page 19
  1192.  
  1193.  
  1194.     MS-DOS and Windows are registered trademarks of Microsoft
  1195.     Corporation.
  1196.  
  1197.  
  1198.               ***** DISCLAIMER *****
  1199.  
  1200.                   (please  read)
  1201.  
  1202.        "ShowMe Saver" is a powerful program.  While I have
  1203.        attempted to build in reasonable safeguards, as with
  1204.        any useful computer software, "ShowMe Saver" may
  1205.        contain errors in the program or documentation.  The
  1206.        author does not give any warranty, either expressed or
  1207.        implied, to anyone using this program other than for
  1208.        the replacement of defective media.  In no event
  1209.        shall the author be liable for any damages, including
  1210.        loss of profits or anticipated profits, lost savings,
  1211.        or other incidental or consequential damages arising
  1212.        out of the use or inability to use this program.  The
  1213.        program comes "as is" and it is the user's responsi-
  1214.        bility to determine whether the program is suitable
  1215.        for his or her computer system and software needs.
  1216.  
  1217.  
  1218.  
  1219.  
  1220.  
  1221.                ***** COPYRIGHT ***** 
  1222.  
  1223.  
  1224.        Copyright (c) 1992-93 Harold Schwartz.   All Rights
  1225.        Reserved.  You may copy "ShowMe Saver" for backup
  1226.        purposes, and you may give copies of the unregistered
  1227.        version to other individuals, which they may also use
  1228.        and copy under the terms of this agreement.  If you
  1229.        copy the unregistered version of "ShowMe Saver" for
  1230.        others, you must include all of the files distributed
  1231.        with it.  "ShowMe Saver" may not be sold, licensed,
  1232.        or a fee charged for its use.  If a fee is charged in
  1233.        connection with the unregistered version of "ShowMe 
  1234.        Saver", it must cover the cost of copying or dissemina-
  1235.        tion only.  Such charges must be clearly identified as 
  1236.        such by the originating party.  Under no circumstances 
  1237.        may the purchaser be given the impression that he is 
  1238.        buying "ShowMe Saver" itself.
  1239.  
  1240.        The author encourages BBS operators to post the
  1241.        unregistered version of the "ShowMe Saver" package 
  1242.        on their systems for download by users wishing to 
  1243.        evaluate it.  No other reproduction or use is 
  1244.        authorized without the express prior written consent 
  1245.        of the copyright owner.
  1246.