home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The World of Computer Software
/
World_Of_Computer_Software-02-386-Vol-2of3.iso
/
a
/
awnotes.zip
/
DV.TXT
< prev
next >
Wrap
Text File
|
1992-12-22
|
2KB
|
51 lines
The Norton pcANYWHERE can be used in conjunction with Desqview either
to allow a remote user to control the Desqview environment, or to
allow control of one Desqview session. This document outlines the
steps necessary to set up either configuration.
Control of the Desqview Environment:
The Desqview environment requires the following minor modifications in
order for The Norton pcANYWHERE to work properly:
1. Run the Desqview Installation program.
A. From the Advanced Setup Menu, choose Keyboard (K), set
Maintain separate shift states for each window to Yes,
and press [Enter].
B. Choose Video (V), and set Do you want text & graphics
displayed at the same time? to Yes, and then press [Enter].
C. Continue installation normally.
2. For each program configured under Desqview, the Virtualize Text &
Graphics parameter must be set to NO.
Control of One Desqview Session:
The Desqview environment requires the following minor modifications in
order for The Norton pcANYWHERE to work properly:
1. Same as Step 1 above.
2. Run Desqview (type DV at the DOS prompt).
3. In Desqview:
A. Choose Open Window.
B. Choose Add a Program, and then press 'O' for Other.
C. Enter the full path to the AWHOST program, and
press [Enter].
D. On the Parameters line, type -M=W.
E. The normal defaults are fine for pcANYWHERE, verify
that the Virtualize text/graphics option set to Yes,
and set all other parameters as required by the
application that will be controlled.
F. Press [F1] to go to the Advanced Options screen.
G. At the bottom of the screen set the following:
1. Uses its own colors: Y
2. Runs in background: Y
3. Keyboard Conflict: 6 or C
4. Can be swapped out: N
H. Set all other options as required by the application
which will be controlled.