home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The World of Computer Software
/
World_Of_Computer_Software-02-385-Vol-1of3.iso
/
s
/
sio_v034.zip
/
HISTORY.TXT
< prev
next >
Wrap
Text File
|
1993-01-11
|
3KB
|
98 lines
New information is inserted at the end.
Beta V0.25
----------
Corrected problem introduced in 0.25 where many OS2 programs
could not drop DTR.
Beta V0.26
----------
If a set DCB IOCTL is issued, and if pending reads/writes exist,
the suspended threads are restarted.
Previous versions always placed port addresses in BIOS memory at
40:0 (DOS sessions) for both COM1 and COM2. The port addresses
starting at 40:0 are no longer filled in for COM1 and COM2 if SIO
did not detect a port there or if the mouse is using the port.
I believe the problem of DOS sessions being put to sleep has been
solved. V0.30 works well on my system with default DOS settings
and default CONFIG.SYS entries as follows:
In the DOS settings
IDLE_SECONDS = 0
IDLE_SENSITIVITY = 75
In CONFIG.SYS
MAXWAIT=3
PRIORITY_DISK_IO=YES
Note that I said these default settings work well with V0.30 ON
MY SYSTEM. The above settings may have to be changed on your
system.
Beta V0.30
----------
An error has been corrected in the code for DOS sessions dealing
with the comm port addresses at 40:0.
Beta V0.31
----------
Beta V0.31
----------
Bit 6 of the virtual Line Status Register (LSR) was stuck on.
This has been corrected and it probably caused some DOS programs
problems.
After two days of testing why incorrect "COMn already in use"
errors were occurring in DOS sessions, I traced the problem to
the Novell Lan Drivers that I am using. It seems that the Novell
OS2 requester drivers are using memory that is not allocated to
them. I have worked around this problem successfully by making
the Novell drivers the last thing in CONFIG.SYS.
Corrected a problem in the handling of DSR.
Corrected a problem that caused erroneous "COMn already in use"
in OS2 sessions.
Added OSDR and IDSR modes or operation.
If SIO/VSIO seems not to transmit anything, where previous
versions transmitted okay, then set your modem to force DSR ON
or, set ODSR OFF with the MODE command.
If SIO/VSIO seems not to receive anything, where previous
versions received okay, then set your modem to force DSR ON or,
set IDSR OFF using the MODE command.
Support added for forcing 16550A chip type. (COM1,3F8,IRQ4,,F)
Corrected a serious problem with multiple comm ports sharing the
same IRQ.
Beta V0.34
----------