48 Sorry, you are not authorized to install this version of PC MACLAN. Please contact Miramar Systems for more information.
49 File Server
50 Decompressing Print Server...
51 none
52 *.FNT
53 none
54 none
55 none
56 Print Server
57 Decompressing Windows DLLs...
58 Decompressing AppleTalk VxDs...
59 Decompressing Network VxDs...
60 Read Me
61 Windows for Workgroups v3.1 Info
62 Decompressing ODI Files
63 none
64 This software requires DOS 5.0+ to operate.\nPlease upgrade your version of DOS.
65 This version of PC MACLAN will not run on your version of Windows.\n\nWindows95 is required.
66 Please insert disk 1.
67 Please insert disk 2.
68 Continue
69 Back
70 The Installer has detected the presence of previously installed network adapter drivers.
71 Use Previously installed adapter drivers
72 Install new adapter drivers
73 Starting Install of PC MACLAN
74 Installation Options
75 Welcome to the PC MACLAN Installer!\nThis program can install and remove PC MACLAN and all required networking software. Please choose an installation option:\n
76 Standard Installation
77 Custom Installation
78 Uninstall
79 The Installer cannot be run while virtual DOS boxes are open. Please close all open DOS boxes prior to running the Installer.
80 Open DOS Boxes
81 The Installer cannot be run while PC MACLAN is running.\nPlease stop the program before running the Installer.
82 You can remove PC MACLAN files and the AppleTalk protocol stack, or you may remove PC MACLAN only. If you have other programs which require AppleTalk, you should remove PC MACLAN only.
83 Uninstall Options
84 Remove PC MACLAN Only
85 Remove PC MACLAN and AppleTalk
86 Network Adapter
87 Select a network adapter configuration:
88 Use the default Windows Network Adapter (NDIS)
89 Add an additional Adapter (ODI)
90 Your system is configured with an incompatible AppleTalk protocol stack. You must remove the stack from your system before installing PC MACLAN. Please check the readme file for information about removing incompatible stacks.
91 Could not identify your ODI network software.\n\nPlease enter the directory of NET.CFG
92 PC MACLAN is Running
93 This installer cannot upgrade over the same PC MACLAN folder. You must specify a different path
94 Install AppleTalk Protocol Stack
95 Install Network Transport
96 Select Install Options
97 This installation requires %ld Kb of disk space on drive %s (%ld Kb are available).\n
98 System\CurrentControlSet\Services\VxD\ATALK
99 lw%d.prn
100 Install PC MACLAN on drive %s
101 Choose another destination
102 Install PC MACLAN
103 Please specify a different destination for the PC MACLAN software:
104 Disk Space: Destination
105 ERROR!\n\nInvalid path specified.
106 Invalid Path
107 Installation Component Options
108 Select the programs you want to AutoStart whenever Windows is loaded:
109 AutoStart Print Server
110 AutoStart File Server
111 AutoStart AppleTalk Init
112 Driver Information
113 Support information regarding your selected driver has been copied to:
114 \n\nIf there are any problems with your network connection you may find this information valuable.
115 CONFIG.SYS file backed up to:
116 CONFIG.SYS could not be backed up.
117 Your current LASTDRIVE letter is:
118 \nThis letter needs to be set to M or greater.\nWould you like the Installer to do this now?\n
119 LASTDRIVE Setting?
120 Change LASTDRIVE to M
121 Don't make changes
122 Your LASTDRIVE letter has not been set.\nThis letter needs to be set to M or greater.\nWould you like the Installer to do this now?\n
123 Load Drivers On Startup?
124 Your configuration requires loading a network adapter driver during DOS startup. If you choose not to make any changes now, you will need to modify your Autoexec.bat file manually.\n
125 Make required changes now
126 Don't change
127 Couldn't create a backup of AUTOEXEC.BAT
128 AUTOEXEC.BAT backed up to:
129 Load Drivers On Startup?
130 AUTOEXEC.BAT needs to start AppleTalk drivers.\nThe Installer can add a call to ATDRIVER.BAT\nWould you like this done?
131 Add the call
132 Don't change the file
133 Failed to create target directory.
134 Could not modify C:\AUTOEXEC.BAT
135 The AppleTalk protocol requires Enhanced Mode NDIS\ndrivers for Ethernet and Token-Ring networks.\n\nThe drivers must be installed for your adapter using the Network Control Panel.\n\n
136 Network Drivers
137 Windows is configured with a different network product.\nTo install PC MACLAN, the Installer must replace portions of the current network with PC MACLAN.\nThis will disable some functions of the current network.\n
138 Replace parts of the current network with PC MACLAN.
139 Keep existing network as it is.
140 Adapter Configuration
141 Current binding:
142 \nReplace with:
143 Replace existing adapter configuration
144 Keep existing configuration
145 Network Binding
146 No NDIS driver was found.\nInstall NDIS driver using Windows Network Setup then re-install PC MACLAN
147 Enter Serial Number
148 Please enter your serial number:
149 Sorry, but your serial number is not correct, please retry.
150 Cannot Find Program
151 PC MACLAN was not found in the default directory:\n
152 Deleting Program Groups
153 Deleting StartUp Items
154 Updating System Files
155 No Program Directory
156 The PC MACLAN program directory could not be found.\nThis folder may have been accidentally removed by the user or another application.\nIf this is not the case then you may have to remove installed files manually.
157 Deleting Program Directory Items
158 Deleting VxDs, .hlp, .ini files
159 Uninstall completed, exiting
160 Program Group
161 Please specify a program group in which to install PC MACLAN.\n\nIf the group does not exist, it will be created for you.
162 Destination Directory
163 You can specify a new destination directory for PC MACLAN or use the default directory
164 Could not create a backup of WIN.INI\nIt was not modified.
165 WIN.INI was backed up to
166 Installation complete
167 Installer Generated Errors
168 The PC MACLAN Installer encountered errors during the software installation.\nPC MACLAN was not fully installed.\nYou can exit now, or you can start over.
169 Start installation process over again
170 Exit to Windows
171 \n\nChanges have been logged to:\n\n
172 Installation Complete
173 All files have been successfully installed.\n\nPC MACLAN files are located on:\n
174 Install has successfully installed PC MACLAN and will now update your Network configuration to support Miramar's protocol and client. The Network Control Panel will be handled for you, but you must respond to any additional dialogs which appear.
175 Exit Installer
176 Are you sure you want to exit the Installer?\n\nThe installation is not yet complete.
177 PC MACLAN
178 The PC MACLAN installer was interrupted before the software was fully installed.\n\nYou can run the Installer again to install PC MACLAN
179 Installer Encountered Errors
180 Errors were encountered before PC MACLAN was fully removed.\nYou may have to remove files manually.
181 Restart Installer
182 Exit to Windows
183 Uninstall Complete
184 PC MACLAN and AppleTalk have
185 PC MACLAN has
186 been removed.\n\nYou can run the Installer at a later time to reinstall PC MACLAN
187 PC MACLAN
188 The Installer was interrupted before PC MACLAN was fully removed.\n\nExit Installer?
189 Restart Installer
190 Exit to Windows
191 Restore Failed
192 AUTOEXEC.BAT could not be restored...\n
193 CONFIG.SYS could not be restored...\n
194 Install drivers automatically (recommended)
195 I will manually install the network drivers
196 WIN.INI could not be restored...\n
197 From:
198 to:
199 Disk Space
200 This is a summary of PC MACLAN installation and removal efforts.
201 Could not open or create:
202 Created File:
203 Could not log, Log file not open!
204 Deleted File:
205 Could not write to:
206 Added line to file:
207 Deleted line from file:
208 Altered line in file:
209 from:
210 to:
211 Created directory:
212 Deleted directory:
213 Created program group:
214 Deleted program group:
215 Created program group item:
216 Deleted program group item:
217 Date and time:
218 Restored file:
219 Back
220 Cancel
221 Start Over
222 Exit
223 OK
224 Continue
225 Help
226 Yes
227 No
228 File Copy Error
229 Error copying file:
230 \nfrom:
231 \nto:
232 Back Up
233 Error!
234 Could not delete:
235 InstStr.dll was not loaded.
236 Windows was not found.\n\nThe Installer requires Windows 3.1+ to function.
237 Initializing Uninstall...
238 Decompressing driver...
239 Previous Installation Exists
240 A previous installation of PC MACLAN has been detected.\n\nChoose Upgrade to reinstall or Exit to leave the installer.
241 none
242 PC MACLAN Client Help
243 none
244 none
245 Install Log
246 \n\nWould you like to view the changes before exiting?
247 The program group you have selected is invalid.\nPlease select another.
248 \n\nThe preceding reference to an incompatible driver was found in file:\n\n
249 Windows 3.1 allows full access to only one network.\nIf you select Replace, some functions of the existing network will be replaced.
250 Please refer to the README.TXT file for information regarding a custom, partial installation.
251 Two previously existing networks were detected. Windows 3.11 allows full access to two networks. If you select Replace, some functions of the existing second network will be replaced. Do you want to:\n
252 Do partial install
253 Replace Second Network
254 Incompatible Driver
255 Invalid command line
256 A network adapter must be selected to install PC MACLAN.\n\nDo you want to continue the installation?
257 Can't open file '%s'
258 Error
259 Parsing Failed
260 Error opening file %s Select a new file or Cancel
261 Unsupported Adapter
262 Drivers not in the list are unsupported by Miramar Systems, Inc. and may not work with PC MACLAN.\n\nPlease view the README file to properly configure your unsupported adapter.\n\nSelect OK to continue or CANCEL for another driver.
263 Network Adapter Settings
264 Default settings will be used for the selected card.
265 Can't create directory: '%s'
266 # Configuration file for %s\n
267 These are the settings used in NET.CFG. If they are not right for your card, you need to modify it.\n
268 Interrupt (IRQ):
269 Not used
270 \nMemory Address:
271 \nI/O Port:
272 found
273 Error: need a Link Driver section for ETHERNET, TOKEN-RING or LOCALTALK
274 Reinstall the protocol stack and choose to install a non-default adapter\n
275 error: seek error occurred while creating the NET.CFG file\n
276 Warning: couldn't remove
277 Warning: couldn't rename
278 can't open!
279 can't seek!
280 Warning
281 This product requires Windows to be running in Enhanced Mode.
282 CrossPlatform User's Guide
283 UNLISTED
284 I'll do it later
285 [ OTHER ] Unlisted Network Adapter
286 UNLISTED Unlisted Network adapter
287 Unlisted
288 Previous Adapter Drivers Detected
289 Do you really want to install the demo version of PC MACLAN?
290 NetCli3.Inf could not be modified.
291 NetCli3.Inf could not be backed up.
292 NetCli3.Inf backed up to:
293 Updating NetCli3.Inf (Please Wait)
294 Net.cfg backed up to:
295 Could not modify Net.cfg
296 Could not backup Net.cfg
297 NetTrans.Inf could not be modified.
298 NetTrans.Inf could not be backed up.
299 NetTrans.Inf backed up to:
300 Updating NetTrans.Inf (Please Wait)
301 \n\nTo run PC MACLAN, the AppleTalk protocol and client must be added using the Network Control Panel.\n\n
302 The AppleTalk protocol can access LocalTalk networks using the selected ODI driver.\n\nThe ODI LocalTalk driver must be enabled using the Network Control Panel.\n\n
303 Upgrading Your Software
304 Upgrade my software
305 Driver Information
306 Paused
307 Paused...\n\nPress 'Enter' or click 'OK' to continue.
308 Please select the components you wish to install:
314 You must have at least 4MB available on your Windows startup disk to install PC MACLAN
315 This installation requires a minimum of %dKB of disk space on drive %s (%dKB are available) for Windows system files. Cannot continue.
316 DoPrintClient
317 DoFileClient
318 To prevent Anti-Virus protection from detecting this installation, you should disable it before running this installer.
319 This installer is for Windows 95 only.
320 Failed to reboot Windows...please reboot manually. Remember to remove the installation disks from the floppy drive and replace them after the system boots.
321 Timed-out while waiting for disk cache update...cannot continue
335 Please choose the correct Network Adapter for your system\n from the following dialog and press 'RETURN.'\n\nThe default value is highlighed.
336 Please choose the correct Network Protocol for your system\nfrom the following dialog and press 'RETURN.'\n\nThe default value is highlighed.
337 Please choose the correct Network Client for your system\nfrom the following dialog and press 'RETURN.'\n\nThe default value is highlighed.
338 Please choose the correct Network Server for your system\nfrom the following dialog and press 'RETURN.'\n\nThe default value is highlighed.
339 You must remove all AppleTalk components and restart your machine before uninstalling or upgrading.
340 DoAppleStack
341 DoNetwork
342 DoAdvanced
343 DoUninstall
344 DoUpgrade
345 DoFullUninstall
346 Software\Miramar Systems, Inc.\InstallParams
347 BootPath
348 PrgGrp
349 Install path
350 Cannot find "system.ini"...aborting
351 "system.ini" could not be found!
352 "system.ini" could not be modified
353 Could not backup "system.ini"...the file was not modified
354 Network
355 Node
356 Zone
357 Please do not remove the installation disk until you are prompted to restart your machine.
358 PC MACLAN Online Help
359 Miramar Systems' PC MACLAN FS
360 An AppleTalk server (file or print) is currently running. You must close them before running this application. If you have added them to the startup menu, they must be removed.
362 &Serial number (leave blank for demo version):
363 Uninstall drivers automatically (recommended)
364 I will manually uninstall the network drivers
365 The network drivers will be automatically uninstalled.Follow the prompted instructions and Windows will restart this program automatically (remember to reinsert install disk).
