home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
uim413.exe
/
UIMPORT.MSG
(
.txt
)
< prev
next >
Wrap
Novell/C-Worthy Message Librarian
|
1994-04-20
|
11KB
|
246 lines
Novell Message Librarian Data File Version 1.00
COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
906: The Unicode files cannot be found.
709: The program cannot read the login script file.
707: The program cannot read the login script file.
File name: %s
220: An error occurred during UIMPORT's attempt to create the context.
100: The control file cannot be found.
**** Updating %s ****
Creating user
720: The user does not exist.
You cannot create this user with the Update Only import mode.
User: %s
110: The specified data file cannot be found.
120: The control file contains an invalid section header:
130: The "Import Control" section contains an invalid statement:
300: An error occurred when the shell name context was read.
Error code: %X.
132: The "Fields" section contains an invalid field definition:
141: You did not specify a field for "Name".
991: An error occurred in NWDSGetAttrCount. Error code: %X.
142: You did not specify a field for "Last Name".
900: An internal application error has occurred. Error code: %X.
800: This utility cannot allocate sufficient memory for
the Directory Services buffer.
920: This utility was unable to allocate %d bytes of memory.
>>> Enter = More C = Continuous Esc = Cancel
150: More fields were expected in this record.
Number expected: %d
Number found: %d
VeRsIoN=4.08
973: The Unicode table files can't be found in the NLS directory
or in the search drives. Code Page: %03d Country: %03d
The UIMPORT utility has been halted by the user.
151: There are more fields in this record than expected.
The remaining fields will be ignored.
IMPORT CONTROL
General Help Screen\hPurpose: Import user objects from an ASCII file.
Syntax: UIMPORT [controlFileName] [dataFileName] |
[[/VER] | [[/?] [ALL] | [ATTR]]\h controlFileName is the name of the control File.
dataFileName is the name of the ASCII inport data file.\hFor help on: Use:
This help screen /?
Control file format and attribute names /? Attr\hFor Example, to: Type:
Control file name 'import.ctl'
Data file name 'import.dat' UIMPORT import.ctl import.dat
Show all attribute names and
format of the control file. UIMPORT /? Attr
Display version information UIMPORT /VER
SEPARATOR
QUOTE
NAME CONTEXT
REPLACE VALUE
USER TEMPLATE
215: The context %s is invalid.
260: An internal system error occurred during UIMPORT's attempt to
canonicalize the context.
Error code: %X.
IMPORT MODE
DELETE PROPERTY
FIELDS
907: The %s file can't be found.
Attribute and Control File Help
(continued)
Purpose: This help shows the valid key words, default values and
property names that can be used in the control file.
991: An error occurred in NWDSSetContext. Error code: %X.
822: An error occurred in NWDSPutAttrVal. Error code: %X.
991: An error occurred in NWDSModifyObject. Error code: %X.
User: %s
Attribute: %s
Value: %s
403: Cannot add a duplicate value to this user.
NWDSModifyObject error: %d.
User: %s
Attribute: %s
Value: %s
991: An error occurred in NWDSGetAttrName. Error code: %X.
991: An error occurred in NWDSComputeAttrValSize. Error code: %X.
991: An error occurred in NWDSGetAttrVAl. Error code: %X.
991: An error occurred in NWDSInitBuf. Error code: %X.
991: An error occurred in NWDSPutAttrName. Error code: %X.
991: An error occurred in NWDSAbbreviateName. Error code: %X.
991: An error occurred in NWDSPutChange. Error code: %X.
991: An error occurred in NWDSGenerateObjectKeyPair.
Error code: %X.
991: An error occurred in NWDSModifyObject.
Error code: %X.
991: An error occurred in NWDSAddObject.
Error code: %X. (%s).
991: An error occurred in NWDSOpenStream.
The login script cannot be opened.
Error code: %X.
708: The program cannot read the login script.
710: The program cannot add the Login Script property.
Error code: %X.
712: The program cannot write the Login Script.
718: The program cannot copy the USER_TEMPLATE to a new user.
Error code: %X.
722: The user already exists.
You cannot update the user with the Create Only import mode.
User: %s
724: You cannot update an object that is not a user.
Object name: %s
*** Done
Copying Template User
Adding User
Generating key pair
Adding to group everyone
312: There is not enough memory to update the mailbox information.
User: %s
Mailbox location: %s
Mailbox ID: %s
313: The mailbox location can't be set for user %s since messaging server %s is either:
1. Not a messaging server
2. Is not found.
3. Does not have a messaging database location property.
Import context: %s
726: The user you selected to remove does not exist.
User: %s.
Removing user %s
This program is about to remove user objects.
Is this what you want to do? (Y/N)
CREATE HOME DIRECTORY
HOME DIRECTORY PATH
HOME DIRECTORY VOLUME
991: An error occurred in NWGetFileServerInformation. Error code: %X.
991: An error occurred in NWDSMapNameToID. This may mean that the skulker has not put object %s on server %s yet. Error code: %X.
991: An error occurred in DSReadObjectAttributes. Error code: %X.
728: The home directory path name specified contains illegal characters.
991: An error occurred in NWGetConnectionID. Error code: %X.
991: An error occurred in NWGetBinderyAccessLevel. Error code: %X.
975: The Unicode table files can't be opened because there are already
too many open files. Close some files or modify your CONFIG.SYS file.
991: An error occurred in DSLocalToUnicodeStricmp. Error code: %X.
730: Directory %s already exists.
732: This utility was unable to create
the new path %s.
DOS error code: %d.
734: You do not have sufficient rights to create the directory.
736: The specified volume does not exist: %s.
738: You do not have sufficient rights to modify this user.
740: This utility cannot change the membership list.
Error code: %X.
740: An error occurred while adding the user name to
the Group member property. Error code: %X.
744: This utility could not create all properties associated with this user.
991: An error occurred in DSGetObjConnID. Error code: %X.
991: An error occurred in NWGetConnectionStatus. Error code: %X.
991: An error occurred in NWDSCanonicalizeName. Error code: %X.
991: An error occurred in DSGetServerConnID. Error code: %X.
991: An error occurred in NWDSGetServerDN. Error code: %X.
991: An error occurred in NWAddTrusteeToDirectory. Error code: %X.
826: The VLMs are not loaded.
972: Access to Unicode table files was denied.
974: The Unicode table files are corrupt.
971: The workstation does not have enough memory to load the
Unicode table files.
970: The attempt to open the Unicode table files failed.
CoPyRiGhT=(c) Copyright 1992,1993 Novell, Inc. All rights reserved.
750: You must be supervisor equivalent to modify
volume space restrictions on volume %s.
760: An error occurred attempting to
modify the volume restrictions.
Error code: %X
770: Volume %s on server %s is not in
your DS tree.
You can't set volume restrictions with this utility
on a pre-4.0 server.
780: This utility can't attach to the server associated
with volume %s.
790: An error occurred in NWDSWhoAmI. Error code: %X
765: An error occurred attempting to get your
effective rights for object %s.
Error code: %X
775: Volume %s is not on server %s.
785: An error occurred attempting to get the volume number for
volume %s on server %s.
Error code: %X
You must enter a colon in the volume restrictions.
You entered %s.
The format is Volume Name:Restriction Amount.
You can't delete the volume restrictions with the Delete Property string.
In order to delete volume restrictions, you need to enter the volume name
with a -1 for the restriction amount.
The entry for a boolean (Yes/No) field was not valid.
The valid entries are Y/1 for Yes or N/0 for No.
You entered %c for object %s.
314: The Foreign Email Address is incorrect.
The format is tttt:aaaaa where t is the type, and a is the address.
The incorrect Email Address value is: %s
727: User %s was not removed.
Error code: %X
909: The %s file is an incorrect version.
Version %s is required.
908: The %s file is an incorrect format and can't be used.
404: An error occurred attempting to write the path property.
The volume object may not exist.
Volume: %s
301: Volume %s has no host resource property and can't be used.
302: Path %s does not exist.
303: You don't have acess to path %s.
Error code: %d
304: An error occurred trying to determine your access level to path %s.
Error code: %d.
305: The utility can't create path %s.
Error code: %X
306: The utility can't delete path %s.
Error code: %X
The mailbox for user %s has been moved.
Old mailbox location: %s
Old mailbox ID: %s
New mailbox location: %s
New mailbox ID: %s
The mailbox files for user %s were deleted.
The volume was: %s
The path was: %s
307: Path %s on volume %s for user %s
can't be created.
308: This utility can't grant rights to path %s
for user %s.
309: This utility can't modify object %s
Error code: %X
310: The utility can't create the mailbox directories
for user %s and mailbox ID %s.
311: Home and mail directories can't be on a server
in the current tree.
Server Name: %s
745: Error modifying the group membership property for user %s.
Group %s may not exist.
DELETE MAILBOX DIRS
The mailbox files for user %s were not deleted.
Old volume: %s
Old path: %s
315: You can't modify the password of user %s.
You can't delete the password with the Delete Property string.
Enter blank for the password to remove it.
MAXIMUM DIRECTORY RETRIES
314: The Foreign Email Alias in incorrect.
The format is tttt:aaaaa where t is the type and a is the address.
The incorrect alias is %s
<No Default>
828: You have added a value for the password expiration
interval which is less than 1 or greater than 365. This may cause login
problems when the password expiration time expires.
A value of 40 has been added to the password expiration interval property.