home *** CD-ROM | disk | FTP | other *** search
/ Network Support Encyclopedia 96-1 / novell-nsepro-1996-1-cd2.iso / download / netware / saa017.exe / SAA017.TXT
Text File  |  1995-08-04  |  8KB  |  249 lines

  1. NOVELL TECHNICAL INFORMATION DOCUMENT
  2.  
  3. TITLE:  SAA017.EXE; NetWare 2.0 SAA Maintenance
  4. README FOR:  SAA017.EXE
  5.  
  6. NOVELL PRODUCTS and VERSIONS:
  7. NetWare for SAA 2.0
  8.  
  9. ABSTRACT:
  10.  
  11. SAA017.EXE is half of the current maintenance patch for SAA 2.0. 
  12. Used
  13.  together with SAA016.EXE, it upgrades "NetWare for SAA 2.0.22"
  14. to "NetWare for
  15.  SAA 2.0.23".  The combination of SAA016.EXE and SAA017.EXE is
  16. recommended for
  17.  SAA 2 sites.  Please apply SAA016 and SAA017, before calling
  18. Tech Support.
  19.  
  20.  
  21.  
  22. -----------------------------------------------------------------
  23.  DISCLAIMER
  24.  THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO
  25. NOVELL.  NOVELL
  26.  MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
  27. HOWEVER, THE
  28.  INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
  29. ONLY.  NOVELL
  30.  MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
  31. INFORMATION.
  32.  
  33. -----------------------------------------------------------------
  34.  
  35.  
  36. SYMPTOM:
  37.  
  38. Symptoms related to API's
  39.  1. Register AH not updated during successful execution.
  40.  2. Convert using table G not functioning properly.
  41.  3. Application Termination problems.
  42.  
  43.  Symptoms related to AS400.
  44.  1. If AS400PCS.NLM loaded with security ON and the Netware
  45. Client Address
  46.  started with 0, user did not connect.
  47.  2. WSF failure if client was connecting to 3 or more systems.
  48.  3. AS400PCS unloading, because Client Access V3R10 would
  49. deallocate.
  50.  
  51.  Symptoms Related to Data Links.
  52.  1. R2SDLC driver loading concurrently with the R3SDLC driver
  53. using the same
  54.  I/O port caused server abends.
  55.  2. R3SDLC driver hang with receive overruns.
  56.  
  57.  Symptoms Related to NWSAA.
  58.  1. RUNCMD with long response, not working for a PU which is not
  59. the focal
  60.  point.
  61.  2. LUx secondary return codes intermittently byte swapped.
  62.  3. LUx, SLIOPEN verb with secondary initialization with an
  63. unformatted
  64.  LOGON message returned primary return code session failure=0F00,
  65. and secondary
  66.  return code LUx_Sli_Logic_Error=7FD00000.
  67.  4. LUx, SLI_OPEN failed after USS MSG 10.
  68.  5. Bind without mode name and or PLU name in the user data
  69. field.  
  70.  6. PREPARE_TO_RECEIVE REPORTED conversation failure when partner
  71. did
  72.  SEND_ERROR rather than PROG_ERROR_PURGING.
  73.  7. Receive Immediate could fail with large (64K) RU size.
  74.  
  75.  Symptoms related to Windows Configurator.
  76.  1. Lower case for adapter not allowed.
  77.  2. Link Type restricted to A - Z.
  78.  3. Setup wiped out existing icons.
  79.  4. Local station address accepted more than 2 digits hex.
  80.  5. Sorting for the print job name list box was case sensitive.
  81.  6. No PU profile remained selected in hot standby.
  82.  7. After the PU profile was copied, Focus moved to the PU
  83. profile.
  84.   
  85.  New Feature
  86.  1. APPC and AS400 configuration in the windows configurator.
  87.  2. Multi adapter PU2.1 profile for all peer connections.
  88.  
  89. SOLUTION: 
  90.  
  91. Apply SAA016 and SAA017.
  92.  
  93. Self-Extracting File Name: saa017.exe
  94.  
  95. Files Included     Size     Date      Time
  96.  
  97. ..\
  98.       SAA017.TXT     (This file)
  99. ..\ADMIN\
  100.       README.TX_            1467         2-10-95      4:56:58 pm
  101.       SAACFG.EX_          579421         5-10-95     10:08:04 am
  102.       SAACFG.HL_          514520          3-8-95      4:51:10 pm
  103.       SAADLG.DL_           20680         5-10-95     10:13:42 am
  104.        SETUP.EXE          109272         3-29-95      1:50:30 pm
  105.        SETUP.INI             438         2-10-95      3:44:22 pm
  106.      S_DLGBK.DL_           18687         12-1-94      7:34:38 pm
  107.       S_INTL.DL_            7705         8-30-94      7:36:14 pm
  108.      S_TABLE.DL_           70500          1-6-95      5:42:24 pm
  109.      TLI_SPX.DL_           30103         9-15-94      2:26:06 pm
  110.      TLI_WIN.DL_            8197          6-8-94      5:28:24 pm
  111.  
  112.  
  113. Installation Instructions:
  114.  
  115. 1. SAA016 and SAA017 will install only on top of version 2.00.22
  116. of NWSAA!! 
  117.  It will not work on any BETA version of NWSAA 2.0!
  118.  
  119.  2. You must have the latest NIC drivers for your system.  They
  120. must be ODI 4.0
  121.  compliant  AND  certified for use with SAA 2.0!!
  122.  
  123.  3. Only attempt installation on NetWare 4.1 or NetWare 3.12.
  124.  
  125.  4. CSLOAD/CSUNLOAD commands are no longer supported.
  126.  
  127.  5. If you have not already done so, install the LANDR4.EXE
  128. patch.
  129.  
  130.  6. If you have not already done so, install the STRTL3.EXE
  131. patch.
  132.  
  133.  7. Make a directory called SAA016, on a hard disk or network
  134. drive.  Make sure
  135.  the directory path is available to the server(s) you are
  136. updating.
  137.    
  138.  8. Put SAA016.EXE into the SAA016 directory you just made.
  139.  
  140.  9. Unzip SAA016.EXE.
  141.                   
  142.                    SAA016  <Enter>
  143.  10. LOAD install
  144.  
  145.  11. Select Product Options.
  146.  
  147.  12. Press <insert>.
  148.  
  149.  13. Select the directory path created above ie,
  150. SYS:\SAA016\DISK1 or
  151.  C:\SAA016\DISK1      
  152.  
  153.  14. Select the server to update.
  154.  
  155.  15. Press <Enter>.
  156.  
  157.  16. Wait for the update to complete.
  158.  
  159.  17. Press <Esc>.  You should see NWSAA 2.0.23
  160.  
  161.  18. Put SAA017.exe into a directory ON A CLIENT of your choice. 
  162. These are not
  163.  server files.  These are the windows configurator (windows
  164. cscon) files.
  165.  
  166.  19. Unzip SAA017.EXE.
  167.                    SAA017  <Enter>
  168.  
  169.  
  170.  20. The admin directory is the Windows configurator portion of
  171. install, this
  172.  is installed through Windows by running File Manager, run,
  173. command line
  174.  C:\ADMIN\SETUP.EXE or A:\ADMIN\SETUP.EXE, this will install the
  175. Windows update
  176.  to the configurator.
  177.  
  178.  !! IMPORTANT: Never manually copy COMMEXEC.NLM or NWSAA.NLM into
  179. the system.
  180.  The install scripts must be used!  If you copy in manually, the
  181. version
  182.  information will be incorrect.  If you have ever applied an ETF
  183. that required
  184.  copying NWSAA.NLM into the system directory manually, please
  185. recopy the
  186.  NWSAA.NLM that was on the system just prior to installing the
  187. ETF, and then be
  188.  sure the version number under Product Options for NWSAA is lower
  189. than the one
  190.  in this patch.  If an ETF was applied with an install script,
  191. you do not have
  192.  to recopy NWSAA.NLM (however, be sure the version you have is
  193. lower than the
  194.  one in this patch).  If the version number is equal than or
  195. greater than the
  196.  one to be installed by this patch, the install will fail. !!***
  197.  
  198.  21. Restart the server before loading COMMEXEC, this will
  199. activate the new
  200.  system modules copied over during installation.
  201.  
  202.  22. Run SAAUP.NCF, this will autoload COMMEXEC and NWSAA.NLM.
  203.  
  204.  NOTE: The CONFIG.SYS for the workstation from which you run
  205. SAACOPY must
  206.  contain FILES=20 (or greater) and BUFFERS=20 (or greater). 
  207. Also, you must
  208.  have a minimum of 550K free base memory to run this SAACOPY.
  209.  
  210.  
  211.  Patch History:
  212.  
  213.  The combination of SAA016 and SAA017 is the first maintenance
  214. patch for SAA
  215.  2.0
  216.  
  217.  
  218.  Solution Specifics: (for some of the symptoms listed above)
  219.  
  220.  Solutions Related to API'S
  221.  1. Code modified so that register AH is updated with 0 upon
  222. successful
  223.  execution.
  224.  2. CCSCVRT.C code modified so that it will function with table
  225. G.
  226.  3. Windows APIs modified.
  227.  
  228.  Solutions related to AS400
  229.  1. AS400PCS.NLM modified so that it will not reject this user.
  230.  2. AS400PCS.NLM modified.
  231.  3. The second byte of the opcode has been masked to zero.
  232.  
  233.  Solutions Related to NWSAA
  234.  1. NWSAA.NLM modified.
  235.  5. When no Mode Name is specified, a string of eight blanks will
  236. be assumed.
  237.  
  238.  
  239.  
  240. -----------------------------------------------------------------
  241.  Any trademarks referenced in this document are the property of
  242. their
  243.  respective owners.  Consult your product manuals for complete
  244. trademark
  245.  information.
  246.  
  247. -----------------------------------------------------------------
  248.  
  249.