home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Share Gallery 1
/
share_gal_1.zip
/
share_gal_1
/
UT
/
UT054.ZIP
/
ACCESS11.ZIP
/
PA.DOC
< prev
next >
Wrap
Text File
|
1989-11-06
|
31KB
|
605 lines
┌────────────────────────────────────────┐
│ │
└┐ ┌──────────────┐ ┌────┐ │
│ │ │ │ └───┘ <tm>
│ │ │ │
│ │ │ │ Electronic Technologies
│ └──────┐ │ │ 3985 S. Rochester Road Ste.H
│ ┌──────┘ │ │ Rochester, Michigan 48063
│ │ │ │
│ └────────────┐┌┘ └┐ CompuServe ID: 70337,1654
│ ││ │ 7 day 24 hr BBS SUPPORT:
└─────────────────────┘└────────┘ A/R BBS (313) 680-9154
PRIVATE ACCESS v1.1 - Copyright 1989 by Electronic Technologies
Documentation and License for $50.00
FoneCall! v3.0 - Copyright 1989 by Electronic Technologies
Documentation and License for $30.00
Other ET Shareware Programs include:
RemCtrl: Allows you to share an answering machine or fax
machine with one of many standard host communication
GasGauge: TSR, Pop-up battery timer for Laptop computers.
Barcodes: Prints UPC, Code 39 and Interleaved 2 of 5 barcodes
on any Epson/IBM dot matrix printer. Also available
are barcode soft-fonts for Hewlett Packard compatible
LASER PRINTERS and text characters up to 1" tall.
PRIVATE ACCESS DESCRIPTION:
PRIVATE ACCESS allows telecommunications access to your PC for the exchange
of computer files and allows the sharing of the same phone line with a fax
machine or answering machine. If you are sharing an answering machine on
the same phone line then PRIVATE ACCESS can call your pager whenever a
message has been left.
(Technically, PRIVATE ACCESS is a communications host program similar to a
simplified electronic bulletin board system. A remote user calling the
host computer must be using a standard PC Communications program in order
to gain access to the PRIVATE ACCESS host. Some currently compatible
communications programs include Procomm, Qmodem, SmartCom, BitCom, PC-Talk,
and Boyan. PRIVATE ACCESS will not work with "co-pilot" communications
programs which use proprietary methods such as Carbon Copy, PC Anywhere and
Remote.)
FONECALL DESCRIPTION:
FoneCall! is actually a limited version of PRIVATE ACCESS that does not
contain the communication host program. Like PRIVATE ACCESS, FoneCall!
uses your computer modem to call your pager shortly after a message has
been left on your answering machine (using the same telephone line as the
answering machine).
SHAREWARE & FEES:
The sole intention of shareware is to provide an inexpensive copy of the
program for evaluation purposes only. Shareware is not free software. If
you find value in this software and if you intend to use this software on a
regular basis then you are morally obligated to pay for it. An order form
has been included at the end of this documentation.
The shareware version of this software may be distributed free of charge by
use of electronic bulletin board services. However, any other distribution
of this program must first be approved in writing by the author. If you
are a software vendor, member of a user group or other organization then
you must read the file "DISTRIB.DOC" for information about the rules and
legalities which must be followed in the distribution of this software.
COMPLETE DISTRIBUTION REQUIREMENTS ARE CONTAINED IN THE FILE "DISTRIB.DOC"
INCLUDED WITH THIS FILE.
After January 1, 1990, you may use your VISA/MC to register through the
Public Software Library (800-2424-PSL orders - Info 713-665-7017) and you
get a $5 credit with PSL for later use.
LICENSE:
Once a donation has been received, the program is officially registered and
licensed. Registration permits a user the license to use this program
only on a single PC. A registered user may use the program on a different
computer, but may not use the program on more than one computer at the same
time. No user may modify this software in any way, including but not
limited to decompiling, disassembling or otherwise reverse engineering the
program.
Registered users get laser printed documentation (we promise that it will
be short and to the point also).
WARRANTY:
The author makes no warranty of any kind express or implied, including
without limitation, any warranties of merchantability and/or fitness for a
particular purpose.
IN NO EVENT WILL ELECTRONIC TECHNOLOGIES OR THE AUTHOR BE LIABLE FOR ANY
DAMAGES, WHETHER DIRECT, INDIRECT, SPECIAL OR CONSEQUENTIAL INCLUDING ANY
LOST PROFITS, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF YOUR USE OR INABILITY TO USE THIS PROGRAM, OR FOR ANY CLAIM
BY ANY OTHER PARTY. THIS PROGRAM IS OPERATED ENTIRELY AT THE USER'S RISK.
TECH SUPPORT:
Tech support is limited to one year for registered users only, and is
available by mail, Compuserve "EasyPlex" or 24 hour Bulletin Board service.
Tech support questions should be submitted to the attention of Charles
Eglinton.
When requesting technical support please report the following:
1) Memory before running the program (use the dos command "CHKDSK:)
2) Computer, modem and printer type (if applicable)
3) The names of any TSR memory resident programs (Sidekick, Prokey..)
4) A listing of both your AUTOEXEC.BAT and CONFIG.SYS files.
SHAREWARE LIMITATIONS:
There are limitations which have been intentionally placed on the
shareware versions of FoneCall! and PRIVATE ACCESS:
1) A seven digit maximum placed on the pager phone number prevents the
shareware versions of both FoneCall! and PRIVATE ACCESS from calling
"long distance" numbers or calling pagers from "dial-9" systems.
2) The shareware versions of FoneCall! and PRIVATE ACCESS have been modified
so that neither will send the numbers to appear on digital display pagers.
3) SHAREWARE PRIVATE ACCESS is limited to three host calls per day.
4) SHAREWARE PRIVATE ACCESS Host sessions may not exceed 10 minutes.
5) SHAREWARE PRIVATE ACCESS File transfers may not exceed 7,500 characters.
INSTALLATION:
We recommend that you copy the distribution files to a bootable floppy
diskette for regular use.
To use the host computer normally (that is, while physically sitting in
front of the host computer) simply start the computer with the A: drive
empty. The batch files and configuration of your Fixed disk will be
enabled for normal usage.
When you leave the location of the Host computer and want to use FoneCall!
or PRIVATE ACCESS, simply insert the bootable diskette in the A: drive and
restart the computer. The FoneCall!/PRIVATE ACCESS diskette will start and
your FoneCall! or PRIVATE ACCESS program will become active.
There are two obvious advantages to this floppy diskette method: First,
none of the existing fixed disk batch files have to be modified. Also, if
a power outage should occur while the diskette is in the diskette drive
then the program will reactivate automatically upon the resumption of
electrical service.
MAKING A BOOTABLE FoneCall! or PRIVATE ACCESS diskette:
Follow these steps to copy the necessary system files from your fixed disk
and make the a "bootable" diskette.
1) Start your computer from the fixed disk (that is, with the floppy
drive empty).
2) Make sure that the DOS FILE "SYS.COM" is available either in the current
directory or in the current path. If you have any questions consult
your dos manual for information about "SYS.COM"
3) Copy the FoneCall! or PRIVATE ACCESS files to the diskette in the A: Drive.
4) Before using FoneCall! or PRIVATE ACCESS for the first time you should
view the "SETTINGS" screen and make any necessary changes. (See "HOW TO
CONFIGURE THE SETTINGS SCREEN" for details.)
SIMPLIFIED INSTRUCTIONS FOR REGULAR USE OF FoneCall! and PRIVATE ACCESS:
1) Configure the settings screen of FoneCall! or PRIVATE ACCESS with your
pager's phone number and modem information.
2) Leave your answering machine and modem attached to the same phone line.
3) FoneCall!/PRIVATE ACCESS will wait until the message has been left and
then it will use the modem to call your pager.
4) If you are using "PRIVATE ACCESS", a built in communication host program
will allow you to exchange files with your computer. Simply call the
computer, ring once, hang up then call back within 90 seconds. The
PRIVATE ACCESS communications host program will answer the phone
allowing you to view directories, archive or process files and transfer
files to and from the host computer.
HOW TO VIEW OR EDIT THE "SETTINGS" SCREEN
To view or edit the settings screen you may either type "A:SETTINGS" or add
"/S" to the command line when starting FoneCall! or PRIVATE ACCESS. Once
the settings screen is displayed use the up and down arrow keys to select
the appropriate field and simply begin typing to make a change. Press the
[Esc] key to automatically save your changes, leave the settings screen and
return to DOS.
The settings screen is divided into three sections. The top section is
used to define the details of the the PAGER MESSAGE ALERT function. The
middle section is for the configuration of the modem commands and
"hardware" information. PRIVATE ACCESS has an additional bottom section
which contains information which applies to the PRIVATE ACCESS
communications host program. If you are using "FoneCall!" then the
communications host parameters will not appear on the settings screen and
they do not apply.
Default settings for each field are contained in the square brackets
[] next to each field name. Following are detailed descriptions for each
settings screen field.
FoneCall!/PRIVATE ACCESS SETTINGS SCREEN DIFFERENCES:
The settings screens for FoneCall! and PRIVATE ACCESS are common for the
first two sections: the MESSAGE ALERT INFORMATION and the HARDWARE
INFORMATION. The last section, COMM HOST INFORMATION does not apply and
does not appear on the FoneCall! settings screen since FoneCall! does not
employ the communications host program.
All of the following setting descriptions and examples apply to both
FoneCall! and PRIVATE ACCESS, up to the section titled "COMMUNICATIONS
SESSIONS". All information after the "COMMUNICATIONS SESSIONS" section
pertain exclusively to the PRIVATE ACCESS program.
***** MESSAGE ALERT INFORMATION ***** (FoneCall! & PRIVATE ACCESS )
RING COUNT:
The number of telephone rings must equal or exceed the number descibed in
the RING COUNT field for FoneCall!/PRIVATE ACCESS to call the pager. For
example, if the RING COUNT is set to "3" then FoneCall!/PRIVATE ACCESS will
call the pager number only if three or more rings have been detected. If
the RING COUNT is set to "D" then the "message alert" function will be
disabled.
ANSWERING MACHINES WITH THE TOLL SAVER FEATURE:
The owner of an answering machine with toll saver knows that if the line
rings 3 or more times he can hang up before the answering machine answers
and save the telephone toll charges because "3 or more rings" is a signal
from the answering machine that there are no messages waiting. However, if
the machine answers in less than 3 rings then this is a signal that there
are messages to be retrieved. If your answering machine always answers on
the same number of rings then you probably do not have the TOLL SAVER
feature and you may disregard this section and the next two paragraphs.
An answering machine's TOLL SAVER may cause a problem with the MESSAGE
ALERT function of PRIVATE ACCESS. The MESSAGE ALERT will work fine when the
answering machine has no messages waiting because the 4 rings requiired
(before the answering machine answers the phone) are more than enough to
trigger the MESSAGE ALERT function. Likewise, if the answering machine
allows at two rings when the TOLL SAVER is active and there are messages
are waiting then RING COUNT can be set to "2" and MESSAGE ALERT will still
call the pager number as desired.
A potential problem exists if the the TOLL SAVER FEATURE uses only one or
less rings as a signal of messages waiting. When the answering machine
answers after only one ring FoneCall!/PRIVATE ACCESS will believe that the
single ring is a signal to start the communications host and will not call
the pager phone number. If your answering machine has TOLL SAVER and
exhibits this problem then consult the answering machine owners manual for
the location of a switch to disable the TOLL SAVER feature. After TOLL
SAVER has been disabled the answering machine should always answer after at
least two rings and FoneCall!/PRIVATE ACCESS MESSAGE ALERT will work
properly.
PAUSE TIME:
When detecting an incoming message FoneCall!/PRIVATE ACCESS will wait for
the number of seconds described in the PAUSE TIME before calling the PAGER
PHONE NUMBER. The PAUSE TIME should be greater than the total time needed
for the anwering machine's outgoing message plus the maximum time needed
for a caller to leave a message. For example, if your answering machine
allows a 20 second outgoing message and allows a maximum two minute
incoming message then the PAUSE TIME should be no less than two minutes and
twenty seconds (140 seconds). This setting is used to allow enough time
for the message call to be completed before FoneCall!/PRIVATE ACCESS uses
the same phone line to dial the PAGER PHONE NUMBER.
PAGER PHONE NUMBER:
The PAGER PHONE NUMBER is the number dialed after FoneCall!/PRIVATE ACCESS
has determined that a message has been left on the answering machine. In
addition to just the phone number, special characters may be added for
required timing pauses in the dialing sequence.
The biggest problem calling a pager number is that the computer modem
has very limited detection abilities. The computer does not know when
the ringing stops or when the pager tone begins and it does not know
when a pager call has been completed successfully. To compensate for
the lack of modem detection you must approximate the timing required and
pause the dialing sequence when necessary. Hayes compatible modems will
pause a dialing sequence for two seconds each time a comma appears in
the phone number.
A typical PAGER PHONE NUMBER might be "555-1212,,,111,,,,," where:
1) The first set of numbers would be the PAGER PHONE NUMBER.
2) The first three commas would pause the dialing sequence for six
seconds which will approximate the time needed before the pager
company answers the telephone.
3) The three "1"'s would be sent during the pager tone and would therefore
appear on the digital display of the pager.
PAGER REDIAL:
This defines the number of times that the MESSAGE ALERT function should
attempt to reach the pager. By selecting "AUTOMATIC" FoneCall!/PRIVATE
ACCESS will attempt to determine if the pager number is busy and will
continue to redial until the call is judged successful (or 10 times,
whichever comes first). To be safe you should trigger the program
manually a few times (using [Alt]-R) to make sure the "AUTOMATIC" selection
operates with your pager system.
A more definite PAGER REDIAL method has been provided in case the automatic
function doesn't work. You can select a specific number of PAGER REDIAL
attempts. If your pager number traffic is light and you've never gotten a
busy signal calling the pager phone number then you can safely set the
PAGER REDIAL to "1". If you've received busy signals when calling your
pager number then you should set this field to 2 or 3. Of course then you
may receive 2 or 3 messages on your pager when FoneCall!/PRIVATE ACCESS
tries to get through, but all successfull attemps will show the same
digitally displayed number and will have been received about a half a
minute apart.
***** HARDWARE INFORMATION ***** (FoneCall! & PRIVATE ACCESS )
COMM PORT:
This is the serial port to which your computer modem is attached. Most
modems are either attached to [1] or [2].
BAUD RATE:
This is the speed at which the computer will communicate with the modem.
The BAUD RATE should be set to the maximum speed allowed by your modem. The
BAUD RATE may, or may not affect the speed at which PRIVATE ACCESS will
allow callers to connect. Read the following paragraph which describes the
INIT COMMAND for further details.
INIT COMMAND [ATHX1S0=0]:
The INIT COMMAND is used to make the modem do nothing except watch for
incoming telephone rings. The first two characters "AT" are to get the
attention of the modem. The third character "H" directs the modem to "hang
up the phone" (just in case and whether or not it is actually off the
hook). Although FoneCall!/PRIVATE ACCESS can use either numeric or verbal
result codes from the modem, the command "V1" causes the modem to send only
verbose responses which are more easily detected by FoneCall!/PRIVATE
ACCESS. The command "S0=0" directs the modem to not answer the phone
during incoming calls. Your MODEM INITIALIZATION may be different
depending on your modem type. Refer to your modem manual for additional
information about modem settings.
PRIVATE ACCESS COMMUNICATIONS HOST NOTE:If your modem has an expanded
command set and you include the command "X1" within the INIT COMMAND then
PRIVATE ACCESS will automatically adjust PRIVATE ACCESS to the baud rate of
each caller.
RING DETECT PHRASE:
When this phrase (or character) is received from the modem then
FoneCall!/PRIVATE ACCESS believes that in incoming RING was detected. If
you've used the default INIT COMMAND then your modem should send the word
"RING" to the program. By simply setting the RING DETECT PHRASE as "G"
then whenever the word "RING" is sent by the modem then FoneCall!/ PRIVATE
ACCESS will see the letter "G" and "see" the incoming rings. If you use
the command "V0" in the INIT COMMAND then numeric responses will be sent
from the modem and the RING DETECT PHRASE should be set as "2" (which is
the numeric modem response for a ring).
BUSY DETECT PHRASE:
This phrase (or character) is similar to the RING DETECT PHRASE except it
is used by FoneCall!/PRIVATE ACCESS to detect a busy signal when attempting
to call the PAGER PHONE NUMBER. Many older modems do not detect busy
signals and this should not cause a problem. If you are not using a modem
with an extended command set then do not enter anything in this field. If
you are using verbose modem responses (V1 command) then the BUSY DETECT
PHRASE should be "Y". If you have used "V0" in the INIT COMMAND then the
BUSY DETECT PHRASE should be "7".
DIALING COMMAND:
The dialing command tells the modem with which method it is to call the
pager. If your telephone is the push button type that makes tones when
each button is pressed then use "ATDT" (for "Dial Tones"). If your phone
service requires a "rotary-type" telephone or when you press your
pushbuttons you hear a series of "clicks" then use "ATDP" (for "Dial
Pulses").
If you are using a digital display pager but do not have "touch tone"
telephone service then you may want to consult your modem manual to
determine how the modem can dial the phone number by first using the
"pulse" method and then switched to "touch-tones" to send the numbers that
are to appear on the pager's digital display.
ANSWER COMMAND:
The answer command is ignored by FoneCall and does not appear on the
FoneCall! SETTINGS SCREEN. The ANSWER COMMAND is used only for PRIVATE
ACCESS. When a single ring is detected the ANSWER COMMAND is sent to the
modem and PRIVATE ACCESS enters it's host communications mode. The ANSWER
COMMAND directs the modem to answer the next incoming call. The first two
characters, "AT", get the attention of the modem. The remaining
characters, "S0=1", are a command to the modem to answer the next incoming
call after the first ring.
MAX PASSWORD ATTEMPTS:
After a data connection has been established the caller can be forced to
type a password to gain full access to the host computer. If the user does
not correctly type the password within the number of attempts described by
the MAX PASSWORD ATTEMPTS then the call will be disconnected and the
PRIVATE ACCESS program will reset and wait for the next call. If the MAX
PASSWORD ATTEMPTS is set to "D" then the password option will be disabled
and callers to the PRIVATE ACCESS will be given full access to the Host
computer without having to type a password.
PASSWORD:
This is the word (or group of random characters) that a caller must type in
order to gain initial access to the host computer. You may use one to ten
characters but control-characters are not allowed. The password is not
case sensitive; Only capital letters may be typed on the setting screen but
a caller may type either capital letters or lower case letters to satisfy
the password correctly. If you do not type a password on the settings
screen then the password option will be disabled and callers will not be
required to type a password.
SHELL PASSWORD:
This is the word (or group of random characters) that a caller must type to
be able to use the "SHELL" option from the main menu. Like the initial
PASSWORD, the SHELL PASSWORD may be one to ten characters but control-
characters are not allowed. The SHELL PASSWORD is not case sensitive; Only
capital letters may be typed on the setting screen but a caller may type
either capital letters or lower case letters to satisfy the SHELL PASSWORD
correctly. If you a SHELL PASSWORD is not entered on the SETTINGS SCREEN
then callers will not be required to type a password to gain access to the
SHELL command.
RESET TIME:
After getting a lone ring the PRIVATE ACCESS program will begin waiting for
an incoming data call. If no data call is received within the number of
seconds described in the RESET TIME then the PRIVATE ACCESS program will
reset. If you do not set a reset time then the RESET TIME will default to
three minutes (180 seconds).
DEFAULT MENUS:
You may select either Novice or Expert as the default menu. The caller may
change the menu type while engaged in a session with the host computer by
pressing the "?" key. The Novice menus show the complete text of each menu
option. The EXPERT menus show only a single line of single letter
abbreviations of the options. The advantage to the EXPERT menu is that the
prompt line is displayed more quickly and therefore the communication
session can be completed more rapidly. Detailed descriptions of each menu
option are in the section titled "COMMUNICATIONS SESSIONS" and follows
these descriptions of the SETTINGS SCREEN fields.
This is a sample novice menu:
S) Shell
U) Upload
D) Download
P) Protocol
?) Expert
COMMAND?
This is a sample EXPERT menu:
S,U,D,P,?:
DEFAULT TRANSFER PROTOCOL:
This is the default method used for file transfers. Files are transfered
groups of characters called "blocks". If a transmitted block fails an
integrity check then it is retransmitted. The transfer protocol can be
changed by the caller by selecting "P" from the main menu during a
communication session. PRIVATE ACCESS file transfer protocols are described
in detail below:
XMODEM & CRC-XMODEM: These are the most commonly used protocols.
Either of these protocols work best on noisy telephone lines since one
error check takes place for every 128 characters transmitted. The
CRC-XMODEM protocol is preferred since the CRC error checking method
is more accurate.
YMODEM & BATCH YMODEM: These protocols are similar to the XMODEM
protocols except they are slightly faster since one error check takes
place for every 1024 characters transmitted. BATCH YMODEM allows
groups of file names to be transmitted at the start of the transfer.
Wildcards may also be used to describe the group of files to be
transferred. If you often transfer groups of similarly named files
then BATCH YMODEM would be good choice for default transfer protocol.
ASCII: The ascii method will only transfer files consisting entirely
of ASCII text and does not perform any error checking. This method
should only be used if none of the others are available.
INACTIVITY RESET:
In the event that a caller "forgets" that a communications session is
taking place, the INACTIVITY RESET will automatically warn the user of the
inactivity and then disconnect the line if a key is not pressed. The
INACTIVITY RESET is temporarily disabled during file transfers and is
reactivated when file transfers are completed. If the INACTIVITY RESET is
set to zero then PRIVATE ACCESS will provide a default reset time of ten
minutes. There may be instances when you would like the call to terminate
automatically after an inactive period. For instance, if you set a 60
second INACTIVITY RESET time then one minute after a file transfer PRIVATE
ACCESS will automatically disconnect the line and reset
ACCIDENTAL CARRIER LOSS:
In the event of an accidental carrier loss one of two actions may be taken.
PRIVATE ACCESS can attempt to disable the modem and recycle the software to
wait for another call or the computer can be "BOOTED" effectively
restarting the entire computer and the PRIVATE ACCESS software. The
"Recycle" option does not work when the "SHELL" is active. The "Boot"
option is recommended since it will work under all conditions including the
rare instance that the PRIVATE ACCESS program should "hang" or lock up.
If you have installed the software as recommended then you should be able
to use the "BOOT" option with no difficulty.
COMMUNICATIONS SESSIONS:
To get access to the host computer the remote user must first call and ring
once, then call back within the time specified as the RESET TIME. If the
"PASSWORD" was used on the SETTINGS screen then the remote user must type a
password to gain full access to the host computer. Once full access has
been accomplished either a long or short menu will appear depending on
whether "Expert" or "Novice" was selected for "MENU TYPE". The main menu
allows the choice of the following options:
S) SHELL: This option allows the remote user to access a DOS command line
and perform many DOS tasks. The most common usage might be to locate files
on the host computer and to "ARCHIVE" the programs that are to be
transmitted to the remote computer (downloaded). Type "EXIT" and press the
[Enter] key to return to the main menu.
U) UPLOAD: To "upload" a file is to electronically transfer the file from
the remote computer to the host computer. When calling PRIVATE ACCESS, to
"upload" a file is to send a file to PRIVATE ACCESS.
D) DOWNLOAD: To "download" a file is to electronically transfer the file
from the host computer to the remote computer. When calling PRIVATE
ACCESS, to "download" a file is to receive a file from PRIVATE ACCESS.
P) PROTOCOL: The advantages of each transfer protocol is described in the
DEFAULT PROTOCOL section later in this manual. The PROTOCOL selection
which is available during the communications session will allow the user to
select a transfer protocol other than the one that was provided as a
default.
?) EXPERT TOGGLE: Pressing the question mark key (?) will toggle the
PRIVATE ACCESS menu between novice and expert modes. For a full
description of each mode read the "DEFAULT MENU" paragraph which appears
earlier in this manual.
G) GOODBYE: When "G" is pressed the PRIVATE ACCESS program will deliver a
final message which includes the connect time and then the call will be
terminated. This is the proper way to end a communication session and will
result in the most trouble free PRIVATE ACCESS operation.
-----------------------------------------------------------------------
FoneCall!/PRIVATE ACCESS REGISTRATION FORM:
Please make your $50 PRIVATE ACCESS donation or your
$30 FoneCall! donation payable to Charles Eglinton
REGISTERED VERSION ENHANCEMENTS FOR BOTH FoneCall! and PRIVATE ACCESS:
1) MESSAGE ALERT CAN BE USED WITH "DIAL 9" SYSTEMS, LONG DISTANCE
PAGER NUMBERS AND DIGITAL DISPLAY PAGERS.
ENHANCEMENTS FOR PRIVATE ACCESS ONLY:
2) UNLIMITED HOST COMMUNICATION CONNECT TIME
3) UNLIMITED NUMBER OF HOST CALLS PER DAY
4) UNLIMITED HOST FILE TRANSFER SIZES
MAIL TO: Charles Eglinton
3985 S. Rochester Road, Suite H.
Rochester, MI 48063
NAME:____________________________________________________
ADDRESS:____________________________________________________
CITY:____________________________________________________
STATE:________________________ ZIP CODE:_________________
PHONE:________________________
PLEASE ANSWER THE FOLLOWING QUESTIONS SO THAT WE MAY SERVE YOU BETTER
IN THE FUTURE:
WHAT IS THE NAME AND
NUMBER OF THE BBS WHERE
YOU FOUND THIS PROGRAM?____________________________________________
WHAT KIND OF COMPUTER DO YOU USE?__________________________________
WHAT KIND OF MODEM DO YOU USE?_____________________________________
WHAT IS YOUR OCCUPATION?___________________________________________
HOW DO YOU INTEND TO USE THIS PROGRAM?_____________________________
___________________________________________________________________
DO YOU FEEL THE DONATION IS TOO HIGH, JUST RIGHT or TOO LOW?_______