Share Gallery 1/share_gal_1.zip/share_gal_1/HR/HR001A.ZIP/TOTLHAMP.DOC

Text File | 1989-06-07 | 10KB | 263 lines

                             TOTAL HAM PLUS

For those who have not seen the TOTAL HAM Series, this is a program designed
to be used online while on the air. For those who have, enchancements follow.

TOTAL HAM PLUS is lite bar menu driven & very fast on hard drives.

TOTAL HAM PLUS gives you while online: logging(3 modes),Beam headings from your
QTH, DXCC,WAS,WAZ,WAC,COUNTY HUNTERS,ITU ZONE & DX ZONE checklists,
QSL managers info, QSL card handling, log maintenence & more.

In the logging mode (Regular,contest & net formats available) you have at your
finger tips, your country, state, county, continent & itu & cq dx zone
checklists. You also have special info screens available such as the
international prefix allocation table, authorized & unauthorized frequencies
for classes of licenses. A user kept QSL managers list is also available.
Entering a call sign at the prompt will display any other contacts made with
that callsign. If that callsign has any QSL manager listed in the QSL managers
list, that manager will be displayed also. Adding a qsl manager or changing an
existing manager while logging the contact will automatically update the QSL
managers list. All logging modes automatically enter the time & date
(converted to UTC from you computers system clock), band,mode, & will carry
over the previous signal reports & frequency (changable if you wish after
entry). A flag is available to flag this contact as wanted for QSL purposes
(new country, rare, etc).

The contest mode is a shortened, fast entry version of regular logging. Along
with auto entry of time & date, the contest name & a 59 signal report is auto
entered (changable if you wish after entry). A Contact number is displayed &
automatically incremented for use if the contest uses contact numbers.

The net mode is the same as regular logging except that it will keep track of
the stations worked while in the net mode & will display, at the touch of a
function key, all contacts made & info you have entered. Who's on the net with
you????

The country,state,county,dx zone & itu zone checklists give you online info
about whether you have confirmed or need a confirmation from a station. They
display all bands & SSB or CW modes with X's for those confirmed.

The QSL manager list mentioned above can be kept up to date by entering info
found in any source. You may also edit,delete or print the list.

The QSL card handling option allows you to enter a QSL card you have received
by entering the call sign. your log is searched & displays all contacts with
that callsign not already marked as received. This will flag your log entry
with the fact that a card was recieved & allow you to also enter this card as
a new country,state,county or zone into one of the checklists at this time.
When you are ready to send QSL cards, you may print lists to send cards to.
or print information labels for use on QSL Cards.
The first list printed is all those you flagged as wanted & the second list
is all those you need to send to. There is also an option to flag contacts as
not wanting to qsl to prevent unneeded contacts from showing in these lists.

The log maintenance option allows editing & listing or printing of your log.
It allows print outs by date, month, whole log or log since last printing.
The log can be printed in two formats.

Those who have used the shareware version "THE TOTAL HAM" will find many
enhancements, changes or additions in "THE TOTAL HAM PLUS".










As of TOTAL HAM PLUS Version 3.0 the following new & enhanced features are
available to the user over the shareware TOTAL HAM version 9.0.

SUMMARY:

Comes with a printed manual.

Much faster, easier to use menus (lite bar).

Much more info is now available from the input of all logging modes.
ALL checklists including the new zones checklist, the callsign allocation
table (for all the strange prefixes), authorized frequencies for class of
license.

Net & contest modes now allow picking up a previously used file. Useful for
on-going nets & contests.

Personalized print outs.

DETAILS OF SOME OF THE CHANGES & ENHANCEMENTS:

1  - Menus are now lite bar selections. Light up the option & hit return.
     Zap your there. ( Comming back to this version after developing the
     plus versions shows me the value of them ). The menus also have a
     short help box describing the option.

2  - Most print outs now are personalized with your callsign & the date of
     the printing.

3  - Printed logs now have page numbers. Printing the whole log starts from 1 &
     printing since last printing will pick up the number it left off at last.

4  - You can now search the beam heading file by country name if the prefix
     is not remembered.

5  - added an abort to all printer functions. ESC will abort, & form feed.

6  - Net logging now saves its additional file (you name it) so you can leave
     the area & come back with out losing it. It also auto enters the net name
     into the contest field, now refered to as the contest/net field.
     the next time you enter net logging you are asked if you want to start a
     new net or if not, all the files *.NET are displayed & you can re-activate
     any of them.

7  - The above now makes it safe to exit the area with the F1 key instead of
     END. Accidental exit before lost the info. F1 is now active through out
     in place of END.

8  - contest logging was changed to to match the net logging format.
     contest file carry the extent of *.CNT.

9  - contest processing was changed to match above.

10 - editing of existing beam heading entries was added.

11 - input of the dates in log printing & log editing was fixed so that a
     2 character field is displayed.










12 - changed the state side K's to W's in the new beam heading files. This
     now matches the countries list which carries W as the primary prefix
     for the USA.

13 - You can now add to, delete from & printout the beam heading file.

14 - In the contest logging mode, if mode is CW '599' is entered as signal
     strength.

15 - Long path has been added to the beam heading file.

16 - Manual entry to the log now carries over the previous freq, time & signal
     reports.

17 - In all logging modes F4 now brings up a checklist menu. This allows any
     checklist to be available at all times.

18 - The above allows county hunters to use any mode & have his checklist
     available. This was the only difference in county hunter net logging so
     that mode was deleted.

19 - This also freed up another function key ( F6 ) to be used for information
     screens. International allocation of callsigns, Frequencies legal for
     class of license are available at this time.

20 - Added a paged display of the qsl managers list when called from logging.
     Allows a partial call to be entered & get a list of matches. example:
     HC will give all HC's with managers.

21 - Added the ability to resort the log by date & time. The log print out
     options print the log as it was entered. If users entered some manually,
     then entered live, then manually again, the log will print out in that
     order. The option in the log maintenance menu will resort the log in the
     proper order, date & time. Will take a little time to do but it should not
     be neccesary to use often.
     BE CAREFUL OF DISK SPACE AVAILABLE & I STRONGLY RECOMMEND YOU REMOVE ALL
     TSR'S BEFORE RUNNING THIS OPTION.

22 - Added ability to set your own left margin on printouts. allows you to
     set up for 3 hole punching of the printouts. Default is 4 spaces.

23 - the frequency is now printed on the log printouts.

24 - Zones are added to the main menu. You have either CQ dx zones (WAZ) or
     ITU zones. You will be asked which you want.
     NEW files zone.dat, zone.idx, zone1.dat & zone1.idx. add to your directory.

25 - Now displays the sent & rec signal reports in the receive qsl card option.

26 - The program no shows leading zero's in all time,date displays & in the
     log.

27 - Added the ability to print information labels for use on QSL Cards.










28 - On entering any logging mode, the bottom frequency of the band entered
     will be entered automatically to the first log entry. change this if you
     wish. the last entered frequency will be carried to the next entry. again
     change if you wish.

29 - Moved the name field down in the logging entry screen. Makes more sense
     since you hardly every now his name as the first thing in the contact.

30 - The log now has two formats. 1. the standard detailed format as before.
     (11 entries per page) 2. A condensed print format that matches the ARRL
     logbook (55 entries per page). The print out page numbers are separate
     for each style.

31 - The [ESC] to abort changes now works as it should.

32 - Entering a recieved QSL card now resets the wanted flag.

33 - Added a reminder to back up all data files as the you leave the program.

34 - Will again run on a 360K floppy system although not recommended.

PLUS many cosmetic & small operational changes to improve the operation.









                       TOTAL HAM PLUS ORDER FORM


Name: _________________________________________Call: __________________

Address: ______________________________________________________________

City & State: _________________________________________________________

Home phone number: ____________________________________________________

Home latitude ( degrees and minutes) __________________________________

Home longitude ( degrees and minutes) _________________________________

Computer make: ______________________________ Color monitor Y/N: ______

Do you have a hard disk? _____________________Size ____________________

Floppy disk size? _____________________________________________________


SEND $59.95 + $2 shipping to:
Virginia residents add 4.5% sales tax


                               REMWARE
                               Po Box 1566
                               Manassas, Va. 22110