Saveas : save screen image to a new file in PCX format.
Print : Laserjet => HP LaserJet @300 dpi.
Color image is mapped into 16 grayscales on printout. Default mapping:
black =>white. white => black. Use Inverse command to reverse the
printout mapping.
Inverse : Reverse the printout color.
*R Dotmatrix: print to Epson compatible printers.
*R Eps-24pin: print in 180 dpi on Epson LQ 24-pin printers.
*R Scale : Magnify or shrink the printout size both in X and Y. Minimum scale is 0.1x. There is no hard-coded upper bound for maximum scale. The output is limited by the paper size. Scaling applies to both full screen and window printing.
*R Window : Define the window area to be printed.
Move cursor around to define the rectangular window area to be printed.
Click left mouse button to define vertices. Press ESC key or right button
when done. Select PRINT command and choose the appropriate printer to
print the window area afterwards.
Quit : quit Finger VGA program.
Edit
Cut : Cut an image into buffer.
Copy: Copy an image into buffer.
Paste: Paste image buffer to screen.
Inverse: Inverse image buffer.
Rotate : Rotate image buffer by 90 degrees.
Horizon: Flip image buffer horizontally.
Vertical: Flip image buffer vertically.
scaleXy : Scale image buffer both in X and Y directions.
Draw
Draw : Free hand drawing.
o Move cursor to the starting point. Press the left button to put pen
down and start drawing. Release left button when done.
o Press right button or ESC key to exit this command.
Line : Draw a line.
o Move cursor to the starting point. Press the left button to put pen
down to define the first point of the line. Move cursor with left button
pressed, and release left button to define the second point of the line
and lift the pen. Repeat the above process for another line.
o Press right button or ESC key to exit this command.
Rectangle : Draw a rectangle.
o Move cursor to the starting vertex. Press the left button to put pen
down to define the first vertex of the rectangle. Move cursor with left
button pressed. Release left button to define the second vertex of the
rectangle and lift the pen. Repeat the above process for another rectangle.
o Press right button or ESC key to exit this command.
Triangle : Draw a line with fixed end points.
o Move cursor to the starting point. Press the left button to put pen down
to define the first point of the base line. Move cursor with left button
pressed. Release left button to define the second point of the base line
and continue moving the cursor to define the middle point. Press the left
button to define the middle point. Repeat the above process for another
triangle.
o Press right button or ESC key to exit this command.
Spray : Press the left mouse button to spray paint the screen. Press
SPACE BAR to bring up the color menu, change color by click the left mouse button, and continue spraying with different color to achieve special effects.
Brush : Brush the screen with selected brush type and size. Use
brush_type under OPTION to change type or size. Use brush as an eraser
with black color selected.
Flood : Move cursor inside an enclosed area and click the left mouse
button to flood the area with foreground color. Flood process stops when
the pixel color is different from the starting point. In case of a wrong
flood, press right button and select UNDO under EDIT to recover the image
before the flood.
Pyramid: Define the base rectangle first and then move the cursor to
define the apex of the pyramid.
DupArea: Duplicate an image area by first pointing the source position
and then the target position. Press left mouse button to start copying
image from source to target area.
Polygon: Click the left mouse button to define vertices of the polygon
and press the right button to close the polygon and exit. If Empty fill
is selected, then the polygon is not filled. Polygon is filled if other
fill patterns are selected.
DupPoint: This is used to select the desired color directly from the
screen image and use the color to paint later. First move mouse to the
position with desired color and click the mouse button to select the color.
Press left mouse button to start drawing or right button to exit.
Curve
Spline : Draw a curve with end point bent.
Bline : Draw a curve with middle point bent.
Circle : Draw a circle.
Ellipse: Draw an ellipse.
Arc : Draw an arc with starting and ending angles.
Text : Write a line of text.
Arrow : Draw an arrow. Use OPTION/Arrow_size to set the size.
Wideline : Draw a thick line. The line width is defined under OPTION
arrow_width.
Pie : Draw a piece of pie.
Screen
Zoom 4x: Magnify the screen by 4x in each dimension.(16x)
Zoom 8x: Magnify the screen by 8x in each dimension.(64x)
Clear : Clear screen with background color(black).
flipX : Flip screen horizontally.
flipY : Flip screen vertically.
Inverse: Inverse the screen color.
Grayscale: toggle between color and grayscale modes.
*R Shrink : shrink the screen image. ( Use Undo to correct any shrink error)
*R Cycle : cycle 256 colors with user defined delay time.
*R Cartoon: continuous display of PCX image files from a control file.
Control file syntax: Use a text editor to create a file with PCX filename
on each line. Start with a blank on each line if the PCX file has the same
palette as the previous one. Start the line without a blank will force
program to reset the palette which can cause some flickering on the screen.
Option
Arrow_size : Set arrow head size.
arrow_Width: Set arrow line size.
>line_Style: Set line style.
>Pattern : Set fill patterns.
>brush_Type: Set brush type.
>color_Back: Set background color.
>color_Front: Set foreground color.
>font_scalE : Set font style and size.
Font_scale
>Type : Set font type.
Triplex
Sansserif
Gothic
Small
Scale : Set font scale.
X_y : Set text orientation, horizontally or vertically.