home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
800 Great Letters
/
greatBear.iso
/
refcd
/
referenz
/
readme.txt
< prev
next >
Wrap
Text File
|
1995-07-12
|
3KB
|
62 lines
REFERENZING
==================================================================
Thank you for purchasing ReferenZing by Great Bear Technology.
This file contains information that is not found in the Users Guide.
I. Installation
a. Installing on hard drives compressed by compression software
b. Adding ReferenZing to your word processor
II. If You Have Problems
INSTALLATION
a. Installing on Hard Drives Compressed by Compression Software
If your hard drive uses compression software such as Stacker
by Stac, DoubleSpace included with MS-DOS 6.0 through 6.21 or
DriveSpace included with MS-DOS 6.22, your system ESTIMATES
available disk space using compression ratio algorithms, and
assumes that most files will be compressable by 1.8 times
(nearly 1/2 original file size).
ReferenZing's database is a highly compressed file, and may
prevent you from installing ReferenZing 1.0 on a compressed
hard disk which reports adequate disk space. For example,
ReferenZing will occupy approximately 13.8 Mb (or 13,800 Kb)
on your hard drive for a full installation on an uncompressed
hard drive. The same installation on a compressed hard drive
may require 25 Mb of reported free space to complete instal-
lation (13.8 Mb x 1.8 = 24.8 Mb). You may need more hard
disk space to complete installation if your compression ratio
is higher than 1.8.
If you receive errors such as "Unable to Write (filename)",
or "Unable to Join File", temporarily remove other programs or
files until you have approximately 25 Mb (or more) of available
disk space and re-run the installation.
b. Adding ReferenZing to your word processor
We have included several macros for use with the most popular
word processors. Consult ReferenZing Help for information about
installing these macros. Be sure to follow the instructions
to ensure a successful installation.
IF YOU HAVE PROBLEMS
If you experience problems installing or operating the software,
call Great Bear Technology's Technical Support staff from 8AM to
5PM PST Monday through Friday (telephone or fax numbers are
supplied with registration material). Leave a message on even-
ings or weekends, and a technical support representative will
return your call within 24 hours or on the next business day.
Please have the software title, serial numbers and registration
information ready before you call.