REFERENZING
==================================================================

Thank you for purchasing ReferenZing by Great Bear Technology. 
This file contains information that is not found in the Users Guide.

I.  Installation
    a. Installing on hard drives compressed by compression software
    b. Adding ReferenZing to your word processor

II. If You Have Problems


INSTALLATION

a. Installing on Hard Drives Compressed by Compression Software    

    If your hard drive uses compression software such as Stacker
    by Stac, DoubleSpace included with MS-DOS 6.0 through 6.21 or
    DriveSpace included with MS-DOS 6.22, your system ESTIMATES
    available disk space using compression ratio algorithms, and
    assumes that most files will be compressable by 1.8 times 
    (nearly 1/2 original file size).  

    ReferenZing's database is a highly compressed file, and may 
    prevent you from installing ReferenZing 1.0 on a compressed 
    hard disk which reports adequate disk space.  For example, 
    ReferenZing will occupy approximately 13.8 Mb (or 13,800 Kb) 
    on your hard drive for a full installation on an uncompressed 
    hard drive.  The same installation on a compressed hard drive 
    may require 25 Mb of reported free space to complete instal-
    lation (13.8 Mb x 1.8 = 24.8 Mb).  You may need more hard 
    disk space to complete installation if your compression ratio 
    is higher than 1.8.

    If you receive errors such as "Unable to Write (filename)",
    or "Unable to Join File", temporarily remove other programs or
    files until you have approximately 25 Mb (or more) of available 
    disk space and re-run the installation.


b. Adding ReferenZing to your word processor

    We have included several macros for use with the most popular
    word processors. Consult ReferenZing Help for information about 
    installing these macros.  Be sure to follow the instructions 
    to ensure a successful installation.



IF YOU HAVE PROBLEMS

    If you experience problems installing or operating the software,
    call Great Bear Technology's Technical Support staff from 8AM to
    5PM PST Monday through Friday (telephone or fax numbers are 
    supplied with registration material).  Leave a message on even-
    ings or weekends, and a technical support representative will 
    return your call within 24 hours or on the next business day.  
    Please have the software title, serial numbers and registration 
    information ready before you call.