home *** CD-ROM | disk | FTP | other *** search
-
- Boiled Wax Leather Armour (Armor)
- Greymeal on boiled leather:
-
- Here's a little information on "boiled leather."
-
- Boiled leather (cuir boili, or some similar spelling)
- is made by soaking thick leather in a SMELLY,
- DANGEROUSLY FLAMMABLE mixture of boiling parafin and
- bees wax (the exact percentages of each escape me). (I
- don't know how long it needs to boil.) The leather
- becomes innundated (soaked) with the wax mixture.
-
- The wax-soaked leather is removed from the wax mixture
- (with heavy gloves, unless you're Madonna or Willem
- Dafoe) and bent until it cools, retaining its shape.
-
- Because of the smell and the danger of fire, I've read
- that a good way to boil leather is to heat the wax in a
- container (ceramic, I think, or possibly an old
- roasting pan) over an electric hot plate OUTDOORS. I
- don't know if a crock-pot produces enough heat, but its
- another possible option.
-
- [FYI, I learned most of this from an article in the
- Markland PLAGUE newsletter written by one of the
- original Dagorhir, Halfdan (aka Ron Smith, or Elrohir
- of the Dispossed).]
-
- Granifar on boiled leather:
-
- Vereshnik, there are several ways of boiling/waxing leather. For the two
- ways I can think of you need:
-
- your leather
- several pounds of parafin wax (found in any grocery store with the
- canning supplies) amount depends on the amount of leather
- standard stove/oven
- a double boiler (two pots, one just slightly larger than other)
- you probably will want gloves and a fire extinguisher handy...
-
- The harder of the two ways is with the souble boiler. First, boil water in
- your larger pan, then place the small pot inside the larger one, add the
- wax and let it melt. Be careful with the heat, parafin wax melts at a
- relatively low temperature, but it also catches fire when it gets too hot.
- When you have enough wax melted, proceed with dipping your leather into the
- wax until the leather is soaked through with it. Set the leather off to
- the side to cool and proceed with the next piece.
-
- Doing this to your leather will make it very solid and durable. If your
- armor ever softens from getting beat on too much, you can throw it back
- into the oven and reheat it. This will respread the wax and harden the
- leather right up. Also, be careful when working with hot wax, it burns
- like a ****** when you get it on open skin, hence the gloves. Pliers or
- some other cooking utensils are usually good to manipulate the leather.
-
- Just for reference, Pentwyvern allows 9/10
- ounce leather as armor and it does not have to be hardened.
-
- The Viking Girl on boiled leather:
-
- Some helpful hints in addition to those already posted about the
- subject...
-
- 1. I make candles, so I have had experience working with wax..
- First_ ALWAYS use a double boiler! Before I ralized this, I never
- had a problem with fires, but its worth the little extra effort..
- The best, (ie cheapest) way to do it is to melt the wax in an old
- coffee can, sitting in a pot of boiling water. Wax never really gets
- out of a pan, so dont use Moms good Teflon pans! I have pots I got
- at a thrift store I use only for candlemaking.
-
- 2. NEVER put wax in the sink! It will clog your drains and
- disposals and is nearly impossible to get clean.
-
- 3. Wax has a low melting point. To keep your waxed leather from
- "melting" in the sun, add about 3 tablespoons of stearine to each
- pound of wax. You can buy a bag fairly cheaply at MJ Designs. It
- makes the wax harder, melt at a higher temperature (eliminating
- wilted leather) They also sell crystals, but if you can get it, use
- the powder, it dissolves completely. I got a pound bag for 5.99 at
- MJ's. Walnut Hill makes most of the supplies that I have seen, and
- you can get a 10 pound block of wax for about 9 dollars.
-
- 4. A non-messy alternative to dipping the wax, and saves money is by
- brushing the wax onto the leather. I think that Bain and Hendrick
- and maybe Fritz have used this technique with good results. just
- melt the wax and then brush it on the leather. You have to do it a
- couple times, but it works really well, and can save a lot of time
- and mess this way. Try it, see how it does, and talk to someone who
- has done it before.
-
- Just my two cents on the subject...
-