home *** CD-ROM | disk | FTP | other *** search
/ Media Share 9 / MEDIASHARE_09.ISO / utility / asw1410.zip / AFDISK.CWA (.txt) next >
C-Worthy Form  |  1991-06-20  |  23KB  |  626 lines

  1. C-Worthy (R) Form File Version 2.0
  2.                                                                                                                                                                                                     
  3. FORMCREATE_PARTITION
  4. HELP_ABOVE_256
  5. HELP_BAD_TRANSLATION
  6. HELP_BETA_BANNER
  7. HELP_CREATE_PARTITION
  8. HELP_DATA_PROTECT
  9. HELP_DELETE_PARTITION
  10. HELP_DIVIDE_256MB
  11. HELP_INTERNAL_256MB
  12. HELP_NOT_READY
  13. HELP_OLD_ASPI    
  14. HELP_PART_FORM
  15. HELP_PART_LIST
  16. HELP_SCSI_LIST
  17. HELP_UNDER_BIOS
  18. HELP_UNIT_ATTENTION
  19. <No Help Context>
  20. Create a DOS PartitionHELP_PART_FORMPartitionFormAction    
  21. START_CYLINTEGERStart Cylinder:
  22. 0..32767
  23. END_CYLINDERINTEGEREnd Cylinder:
  24. 0..32767
  25. ABANDON_CHANGES
  26. Abandon Changes
  27. ALIGNCHANGEDLIST_EL_NOT_FOUND
  28. AlignChangedList was called with the element "%s", but that element was not found in the currently selected list.
  29. ALIGNLISTDISPLAY_EL_NOT_FOUND
  30. AlignListDisplay was called with the element "%s", but that element was not found in the currently selected list.
  31. ALREADY_IN_HELP
  32. No More Help Available.
  33. ANTE_MERIDIAN
  34. BAD_FILE_HANDLE_TABLE_SIZE
  35. An attempt to allocate %d file handles failed, must be in the range of 5 to 260.
  36. BAD_HELP_FILE_HEADERY
  37. The help file "%s" is the wrong version.
  38. BAD_PARAMETERS
  39. Invalid parameters encountered.
  40. CANCEL_CHANGESP
  41. Cancel All Changes
  42. CHECKHEADER_READ_ERROR
  43. A read error occurred while reading the data file.
  44. CHECKHEADER_WRONG_TYPE
  45. The data file was not of the correct type.
  46. CHECKHEADER_WRONG_VERSION
  47. The data file format is the wrong version.
  48. CLOSE_FAILURE
  49. An attempt to close the file "%s" failed.
  50. CLOSE_FILE_FAILED
  51. An attempt to close a file in the extended table failed.
  52. CLOSE_INVALID_HANDLEN
  53. An attempt to close the file "%s" failed because the specified file handle is invalid.
  54. COUNTRY_FAILURE_
  55. An attempt to get the DOS country information failed.
  56. COUNTRY_FILE_NOT_FOUNDD
  57. An attempt to get the DOS country information failed because the alternate keyboard handler file was not found.
  58. CREATE_DIR_ACCESS_DENIED\
  59. An attempt to create the directory "%s" failed because access was denied.
  60. CREATE_DIR_PATH_NOT_FOUND[
  61. An attempt to create the directory "%s" failed because the specified path was not found.
  62. CREATE_FILE_ACCESS_DENIEDS
  63. An attempt to create the file "%s" failed because access was denied.
  64. CREATE_FILE_FAILUREF
  65. An attempt to create the file "%s" failed.
  66. CREATE_FILE_PATH_NOT_FOUNDQ
  67. An attempt to create the file "%s" failed because the specified directory was not found.
  68. CREATE_FILE_TO_MANY_OPEN_FILESR
  69. An attempt to create the file "%s" failed because there are too many open files.
  70. CUT_TOO_BIGU
  71. The Marked Block Is Too Big For Available Memory.
  72. DAY_FRIDAY?
  73. Friday
  74. DAY_MONDAY;
  75. Monday
  76. DAY_SATURDAY@
  77. Saturday
  78. DAY_SUNDAY:
  79. Sunday
  80. DAY_THURSDAY>
  81. Thursday
  82. DAY_TUESDAY<
  83. Tuesday
  84. DAY_WEDNESDAY=
  85. Wednesday
  86. DELETEDIRECTORY_ERROR_IN_USE
  87. An attempt was made to delete directory "%s", but the directory is currently being used by another station.
  88. DIRECTORY_ALREADY_EXISTS
  89. The directory "%s" already exists.
  90. DISK_ERROR_HEADER
  91. Disk Error Drive:  
  92. DISPLAYHEADER_FAILURE
  93. The attempt to display the utility header, with the current date and time, failed.
  94. DISPLAYTEXTINPORTAL_DOESNT_FIT_
  95. The text to be displayed in the current portal was too long to fit in the portal.
  96. DISPLAYTEXTINPORTAL_NO_PORTAL`
  97. There is not a currently selected portal in which to display the text.
  98. DUP_HANDLE_FAILURE`
  99. An attempt to duplicate a file handle failed.
  100. DUP_HANDLE_INVALID_HANDLEJ
  101. An attempt to duplicate a file handle failed because the specified file handle was invalid.
  102. DUP_HANDLE_TO_MANY_OPEN_FILESI
  103. An attempt to duplicate a file handle failed because there are too many open files.
  104. EDITPORTALSTRING_BAD_STRINGH
  105. The string that was passed to EditPortalString was longer than the maximum length allowed.  Possibly the string was not properly initialized.
  106. ERROR_CANT_CREATE_ERROR_PORTAL
  107. The error portal could not be created during program initialization.
  108. ERROR_DESCRIPTION_HEADER
  109. DESCRIPTION
  110. ERROR_DESCRIPTION_NOT_AVAILABLE
  111. The description for this error is not available.
  112. ERROR_ERROR_HEADER
  113. ERROR
  114. ERROR_PORTAL_HEADER
  115. Error Report
  116. ERROR_REPORT_HEADER
  117.               *** ERROR REPORT ***
  118. ERROR_RETURNED_CODE_OF
  119. %s returned an error code of %d.
  120. ERROR_SEVERITY_FATAL
  121. Further program execution is not possible.
  122. ERROR_SEVERITY_HEADER
  123. SEVERITY
  124. ERROR_SEVERITY_INFORM
  125. Program execution should continue normally.
  126. ERROR_SEVERITY_WARNING
  127. The current operation cannot be completed.
  128. ERROR_SYSTEM_FILE_MISSING
  129. The system error library file "%s" is missing.
  130. ETC_TEXTI
  131. EXITG
  132. F_ANSWERED
  133. Answered
  134. F_CANCEL_ALL_CHANGES
  135. Cancel All Changes And Exit
  136. F_CANCEL_EDIT
  137. Cancel Edit
  138. F_CONTINUE_EDIT
  139. Continue Edit
  140. F_EDIT_FIRST_UNANSWERED
  141. Edit First Unanswered Field
  142. F_EDIT_UNANSWERED
  143. Edit Unanswered Field    
  144. F_INVALID
  145. Invalid
  146. F_LEAVE_INVALID
  147. Leave Invalid
  148. F_LEAVE_UNANSWERED
  149. Leave Unanswered
  150. F_MANY_REQUIRED_FIELDS
  151. There are %d required fields that have not been answered.
  152. F_MARK_FIELD
  153. Mark Field
  154. F_ONE_REQUIRED_FIELD
  155. There is 1 required field that has not been answered.
  156. F_TENTATIVE
  157. Tentative    
  158. F_THROUGH
  159. through
  160. F_UNANSWERED
  161. Unanswered
  162. F_VALUE_NOT_VALID
  163. %s is not valid.  The value must be in the range 
  164. FAILED_APPEND_TO_LIST
  165. An attempt to allocate additional memory to add element "%s" to the current list was unsuccessful.
  166. FREE_FAILURE%
  167. An attempt to free a section of memory that was previously allocated failed.
  168. FUNCTIONAL_HELP_HEADER
  169. The function key assignments on your machine are:
  170. GETERROR_DELETED_ERRORr
  171. GetError was called, but the specified procedure has been deleted.
  172. GETLISTHEAD_FAILURE!
  173. An attempt was made to get the first element in a list and the list was empty.
  174. GETLISTINDEX_ELEMENT_NOT_FOUND
  175. GetListIndex was called with the element "%s", but that element was not found in the currently selected list.
  176. GETLISTTAIL_FAILURE"
  177. An attempt was made to get the last element in a list and the list was empty.
  178. GETMESSAGE_DELETED_MESSAGEp
  179. GetMessage was called, but the requested system message has been deleted.
  180. GETMESSAGE_NO_MESSAGEo
  181. GetMessage was called, but no message was specified.
  182. GETPORTALINFO_NO_PORTALE
  183. An attempt was made to get the current portals information, and there was not a currently selected portal.
  184. HEADER_MESSAGE_TOO_WIDEb
  185. The combined width of the program header and the version number is greater than 34.  This means that the header will be overwritten by the date and time for certain days in certain months (ie. Wednesdays in September).  Please shorten the header message.
  186. HELP_CONTEXT_STACK_EMPTY
  187. An attempt was made to return to the previous help context, but there is no previous help context on the help context stack.
  188. HELP_CONTEXT_STACK_FULL
  189. PushHelpContext was called to push the help context number %d, but the help context stack is already full.
  190. HELP_DEFAULT_TEXT^
  191. No application specific help is available at this point.  Pressing the HELP key again will display a list of the function key assignments on your machine.
  192. HELP_ESCAPE_DESCRIPTIONk
  193. Exits help.
  194. HELP_HELP_DESCRIPTIONi
  195. Displays a list of the function key assignments on your machine.
  196. HELP_HELP_HEADERc
  197. The following keys are available while viewing help:
  198. HELP_PDOWN_DESCRIPTIONg
  199. Moves to the next help screen.
  200. HELP_PUP_DESCRIPTIONe
  201. Backs up to the previous help screen.
  202. INITHELP_READ_ERROR\
  203. The Help Librarian Data File "%s" could not be read.  The help system will not be able to provide some contextual help for this utility.
  204. INITHELP_UNABLE_TO_OPEN_FILE[
  205. The Help Librarian Data File "%s" could not be found.  The help system will not be able to provide some contextual help for this utility.
  206. INITHELP_WRONG_VERSION]
  207. The Help Librarian Data File "%s" is the wrong version.  The help system will not be able to provide some contextual help for this utility.
  208. INVALID_DRIVE
  209. An invalid drive was used.
  210. INVALID_DYNAMIC_MESSAGE_NUMBERX
  211. An attempt was made to set Dynamic Message Number %d.  There is no such dynamic message pointer.
  212. INVALID_HELP_CONTEXT
  213. An attempt was made to set the help context to number %d, but there are only %d help contexts defined (help context numbers are zero based).
  214. KEY_BACK_DESCRIPTIONy
  215. Delete the character to the left of the cursor.
  216. KEY_BACK_NAMEx
  217. BACKSPACE
  218. KEY_CANCEL_DESCRIPTIONw
  219. Cancel markings or edit changes.
  220. KEY_CANCEL_NAMEv
  221. CANCEL
  222. KEY_CYCLE_DESCRIPTION
  223. Cycle through menus or screens.
  224. KEY_CYCLE_NAME
  225. CYCLE
  226. KEY_DELETE_DESCRIPTION|
  227. Delete an item.
  228. KEY_DELETE_NAME}
  229. DELETE
  230. KEY_DOWN_DESCRIPTION
  231. Move down one line.
  232. KEY_DOWN_NAME
  233. KEY_ESCAPE_DESCRIPTIONs
  234. Back up to the previous level.
  235. KEY_ESCAPE_NAMEj
  236. ESCAPE
  237. KEY_EXIT_DESCRIPTIONu
  238. Exit the program.
  239. KEY_EXIT_NAMEt
  240. KEY_FLEFT_DESCRIPTION
  241. Move left one field or word.
  242. KEY_FLEFT_NAME
  243. FIELD LEFT
  244. KEY_FRIGHT_DESCRIPTION
  245. Move right one field or word.
  246. KEY_FRIGHT_NAME
  247. FIELD RIGHT
  248. KEY_HELP_DESCRIPTION
  249. Provide on-line help.
  250. KEY_HELP_NAMEh
  251. KEY_INSERT_DESCRIPTION{
  252. Insert a new item.
  253. KEY_INSERT_NAMEz
  254. INSERT
  255. KEY_LEFT_DESCRIPTION
  256. Move left one position.
  257. KEY_LEFT_NAME
  258. KEY_MARK_DESCRIPTION
  259. Toggle marking for current item.
  260. KEY_MARK_NAME
  261. KEY_MODE_DESCRIPTION
  262. Change Modes.
  263. KEY_MODE_NAME
  264. KEY_MODIFY_DESCRIPTION
  265. Rename/modify/edit the item.
  266. KEY_MODIFY_NAME~
  267. MODIFY
  268. KEY_PDOWN_DESCRIPTION
  269. Move down one page.
  270. KEY_PDOWN_NAMEf
  271. PAGE DOWN
  272. KEY_PUP_DESCRIPTION
  273. Move up one page.
  274. KEY_PUP_NAMEd
  275. PAGE UP
  276. KEY_RIGHT_DESCRIPTION
  277. Move right one position
  278. KEY_RIGHT_NAME
  279. RIGHT
  280. KEY_SDOWN_DESCRIPTION
  281. Move to the very end.
  282. KEY_SDOWN_NAME
  283. SPECIAL DOWN
  284. KEY_SELECT_DESCRIPTION
  285. Accept information entered or select the item.
  286. KEY_SELECT_NAME
  287. SELECT
  288. KEY_SLEFT_DESCRIPTION
  289. Move to the left-most position on the line.
  290. KEY_SLEFT_NAME
  291. SPECIAL LEFT
  292. KEY_SRIGHT_DESCRIPTION
  293. Move to the right-most position on the line.
  294. KEY_SRIGHT_NAME
  295. SPECIAL RIGHT
  296. KEY_SUP_DESCRIPTION
  297. Move to the very beginning.
  298. KEY_SUP_NAME
  299. SPECIAL UP
  300. KEY_UP_DESCRIPTION
  301. Move up one line.
  302. KEY_UP_NAME
  303. LIST_STACK_EMPTY
  304. An attempt was made to pop a list from the list stack, and the list stack was empty.
  305. LIST_STACK_FULL
  306. An attempt was made to push a list on the list stack, and the list stack is already full.
  307. LSEEK_FAILURE
  308. An attempt to seek to a specific position in the file "%s" failed.
  309. LSEEK_INVALID_HANDLEP
  310. An attempt to seek to a specific position in the file "%s" failed because the handle is invalid.
  311. LSEEK_INVALID_MODEO
  312. An attempt to seek to a specific position in the file "%s" failed because the mode is invalid.
  313. MALLOC_FAILURE
  314. An attempt to allocate %u bytes of additional memory failed.
  315. MARK_IS_ONT
  316. No Insertions Allowed While Mark is On.
  317. MENU_TOO_LARGE
  318. The number of items in the current menu will not fit on the screen.
  319. MONTH_APRIL1
  320. April
  321. MONTH_AUGUST5
  322. August
  323. MONTH_DECEMBER9
  324. December
  325. MONTH_FEBRUARY/
  326. February
  327. MONTH_JANUARY.
  328. January
  329. MONTH_JULY4
  330. MONTH_JUNE3
  331. MONTH_MARCH0
  332. March    
  333. MONTH_MAY2
  334. MONTH_NOVEMBER8
  335. November
  336. MONTH_OCTOBER7
  337. October
  338. MONTH_SEPTEMBER6
  339. September
  340. NO_CHARS_MARKEDV
  341. There are No Characters in the Marked Block.
  342. NO_ERROR_RETURNED
  343. No error is returned from this function call.
  344. NO_RIGHT_CREATE_DIRECTORY
  345. You have no rights to create the directory "%s".
  346. NOT_FOUND_DIRECTORY
  347. The specified directory cannot be found.
  348. ON_FIRST_HELP_SCREENa
  349. There is no preceding help screen.
  350. ON_LAST_HELP_SCREENb
  351. This is the last help screen.
  352. OPEN_ACCESS_DENIEDW
  353. An attempt to open the file "%s" failed because access was denied.
  354. OPEN_FAILURE
  355. An attempt to open the file "%s" failed.
  356. OPEN_FILE_NOT_FOUNDT
  357. An attempt to open the file "%s" failed because the specified file was not found.
  358. OPEN_INVALID_ACCESS_CODEX
  359. An attempt to open the file "%s" failed because the specified access code is invalid.
  360. OPEN_PATH_NOT_FOUNDU
  361. An attempt to open the file "%s" failed because the specified directory was not found.
  362. OPEN_TO_MANY_OPEN_FILESV
  363. An attempt to open the file "%s" failed because there are too many open files.
  364. OVERLAY_NOT_FOUND
  365. Unable to load overlay file "%s$RUN.OVL".
  366. OVERLAY_READ_ERRORm
  367. A read error occurred while reading the overlay file "%s$RUN.OVL".
  368. OVERLAY_WRONG_VERSIONn
  369. The overlay file "%s$RUN.OVL" is the wrong version for this utility.
  370. PALEDIT_DEFAULT_PALETTE+
  371. Default
  372. PALEDIT_DELETE_CONFIRM
  373. Delete Palette(s)?
  374. PALEDIT_ERROR_PALETTE,
  375. Error
  376. PALEDIT_ESCAPE_MESSAGE
  377. Press Escape to Exit
  378. PALEDIT_GRAY&
  379.   Gray
  380. PALEDIT_HEADER-
  381. Select Attribute
  382. PALEDIT_HELP_PALETTEA
  383. PALEDIT_INITIAL_PALETTEB
  384. Initial
  385. PALEDIT_INTENSE'
  386.   Intense
  387. PALEDIT_MUST_KEEP_ZEROC
  388. Palette 0 may not be deleted.
  389. PALEDIT_NO_MORE_SPACED
  390. No more space available
  391. PALEDIT_NORMAL)
  392.   Normal
  393. PALEDIT_PALETTE_HEADERJ
  394. Palette List
  395. PALEDIT_REVERSE
  396.   Reverse
  397. PALEDIT_SAMPLE_GRAYK
  398. Gray Text
  399. PALEDIT_SAMPLE_HEADERL
  400. Text Style Samples
  401. PALEDIT_SAMPLE_INTENSE
  402. Intense Text
  403. PALEDIT_SAMPLE_NORMALM
  404. Normal Text
  405. PALEDIT_SAMPLE_REVERSEN
  406. Reverse Text
  407. PALEDIT_SAMPLE_SHADOWW
  408. Shadow Text
  409. PALEDIT_SAVE_HEADERZ
  410. Save Palette?
  411. PALEDIT_SHADOW*
  412.   Shadow
  413. PALEDIT_UNTITLED_PALETTEl
  414. PALEDIT_WARNING_PALETTE
  415. Warning
  416. PALETTE_STACK_EMPTY
  417. The Palette Stack is Empty.
  418. PALETTE_STACK_FULL
  419. The Palette Stack is Full.
  420. PASTE_BUF_EMPTYR
  421. The Paste Buffer is Empty.
  422. PORTAL_PCB_TABLE_FULL
  423. The portal control block table is full, and an attempt was made to create another portal.
  424. PORTAL_TOO_LARGE
  425. An attempt was made to create a portal of height %d and width %d.
  426. POST_MERIDIAN
  427. PRESS_ESCAPE_TO_CONTINUE
  428. --Press <Esc> to continue--
  429. READ_ACCESS_DENIEDY
  430. An attempt to read from the file "%s" failed because access was denied. The read request was for %u bytes.
  431. READ_END_OF_FILE
  432. An attempt to read from the file "%s" returned an end of file error. The read request was for %d bytes.
  433. READ_FAILURE
  434. An attempt to read from the file "%s" failed. The read request was for %u bytes.
  435. READ_INVALID_HANDLEZ
  436. An attempt to read from the file "%s" failed because the specified file handle was invalid. The read request was for %u bytes.
  437. READ_WRONG_NUMBER
  438. File "%s" should have had %u bytes read from it.
  439. REMOVE_DIR_ACCESS_DENIEDL
  440. An attempt to remove the directory "%s" failed because access was denied.
  441. REMOVE_DIR_FAILUREa
  442. An attempt to remove the directory "%s" failed.
  443. REMOVE_DIR_INVALID_DRIVEM
  444. An attempt to remove the directory "%s" failed because the specified drive is invalid.
  445. REMOVE_DIR_PATH_NOT_FOUNDK
  446. An attempt to remove the directory "%s" failed because the specified directory was not found.
  447. REMOVE_FAILURE
  448. An attempt to remove the file "%s" failed.
  449. RENAME_ACCESS_DENIEDG
  450. An attempt to rename the file "%s" to "%s" failed because access was denied.
  451. RENAME_FAILURE
  452. An attempt to rename the file "%s" to "%s" failed.
  453. RENAME_FILE_NOT_FOUNDE
  454. An attempt to rename the file "%s" to "%s" failed because the specified file was not found.
  455. RENAME_NOT_SAME_DEVICEH
  456. An attempt to rename the file "%s" to "%s" failed because the destination device was not the same.
  457. RENAME_PATH_NOT_FOUNDF
  458. An attempt to rename the file "%s" to "%s" failed because the specified path was not found.
  459. RESTORELIST_FAILURE#
  460. An attempt was made to restore the current list from an invalid list buffer number %d.
  461. SAVE_CHANGESQ
  462. Save Changes
  463. SAVELIST_FAILURE$
  464. An attempt was made to save the current list to an invalid list save buffer number %d.
  465. SECURE_FIELD
  466. This field is secure and cannot be edited.
  467. SHORT_MONTH_APRIL
  468. SHORT_MONTH_AUGUST
  469. SHORT_MONTH_DECEMBER
  470. SHORT_MONTH_FEBRUARY
  471. SHORT_MONTH_JANUARY
  472. SHORT_MONTH_JULY
  473. SHORT_MONTH_JUNE
  474. SHORT_MONTH_MARCH
  475. SHORT_MONTH_MAY
  476. SHORT_MONTH_NOVEMBER
  477. SHORT_MONTH_OCTOBER
  478. SHORT_MONTH_SEPTEMBER
  479. Sept.
  480. SORTFILE_READ;
  481. An attempt to Read a record from the Source file failed.
  482. SORTFILE_SEEK:
  483. An attempt to Seek within the Source file failed.
  484. SORTFILE_VERSION9
  485. Version 3.0 Compiler Required
  486. SORTFILE_WRITE<
  487. An attempt to Write to the temporary file failed.
  488. TEXT_BUF_FULLS
  489. The Text Buffer Is Full.
  490. TEXTEDIT_INPUT_TOO_LONGO
  491. The procedure "EditText" failed because the default text was longer than the specified maximum length.
  492. TRACE_EXIT_MESSAGE
  493. Trace forced to exit because it could not create a portal.
  494. TRACE_PORTAL_HEADER
  495. Program Trace Portal
  496. TYPE_UNDEFINED(
  497. The current field type is not defined.
  498. UNABLE_TO_ALLOCATE_MEMORY
  499. An attempt to allocate additional memory was unsuccessful.
  500. UNKNOWN_PROCEDUREq
  501. An unknown procedure
  502. UNLINK_ACCESS_DENIEDC
  503. An attempt to unlink the file "%s" failed because access was denied.
  504. UNLINK_FILE_NOT_FOUNDA
  505. An attempt to unlink the file "%s" failed because the file was not found.
  506. UNLINK_PATH_NOT_FOUNDB
  507. An attempt to unlink the file "%s" failed because the specified path was not found.
  508. WAIT_MESSAGE
  509. Please Wait
  510. WRITE_ACCESS_DENIED]
  511. An attempt to write to the file "%s" failed because access was denied. The write request was for %u bytes.
  512. WRITE_FAILURE 
  513. An attempt to write to file "%s" failed. The write request was for %u bytes.
  514. WRITE_INVALID_HANDLE^
  515. An attempt to write to the file "%s" failed because the specified file handle was invalid. The write request was for %u bytes.
  516. WRITE_WRONG_NUMBER
  517. File "%s" should have had %d bytes written to it.
  518. M_1024_CYL
  519. AFDISK can only support drives with a max. of 1024 cylinders.  This drive has more cylinders than can be supported by AFDISK.  AFDISK will only use the first 1024 cylinders of this drive.
  520. M_ABOVE_256MB
  521. Data above 256MB
  522. M_ASK_DIVIDE_256MB2
  523. Choose Format Option
  524. M_ASK_INTERNAL_256MB/
  525. Partition and Format Data Above 256MB?
  526. M_BELOW_256MB
  527. Data below 256 MB
  528. M_BELOW_OR_ABOVE
  529. Select Part of Drive to Partition
  530. M_CREATE_PARTITION7
  531. Create Partition? - <F1> Help
  532. M_DELETE_PARTITION
  533. Delete Partition? - <F1> Help
  534. M_DELETE_PARTITIONS
  535. Delete Partitions? - <F1> Help
  536. M_DISK_FULL
  537. No more free space on the disk!
  538. M_DIVIDE_256MB0
  539. Divide the disk (DOS compatible format).
  540. M_DOSFORM_HDR
  541. Create a DOS Partition
  542. M_DRIVE_INFO
  543. Logical Drive Info
  544. M_END_PROMPT
  545. End Cylinder: 
  546. M_ERROR_CHKSTAT"
  547.  Check Status Returned.
  548. M_ERROR_MALLOC-
  549.  Not enough memory.
  550. M_ERROR_SPI#
  551.  Illegal Status from SCSI Manager.
  552. M_ERROR_TIMEOUT!
  553.  Timed out waiting for I/O completion.    
  554. M_GET_DEV(
  555.  Get Device Type Command.
  556. M_HA_INQ3
  557. ASPI Command Host Adapter Inquiry.    
  558. M_INQUIRY$
  559.  Inquiry Command. 
  560. M_INSTALLED_DEVICES
  561.   Select SCSI Device to Partition
  562. M_IO_COMMAND.
  563.  I/O Command.
  564. M_IO_ERROR
  565. !!! ERROR OCCURRED DURING IO OPERATION !!!
  566. M_IO_ERROR_MESSAGE 
  567. M_MAX_512
  568. AFDISK can only support devices which use 512 bytes per sector.  Unable to partition the selected device.
  569. M_MAX_PART5
  570. Maximum Number of Partitions Reached!
  571. M_NO_DIVIDE_256MB1
  572. Do not divide the disk (proprietary format).
  573. M_PART_BOOT
  574. Bootable
  575. M_PART_DOS*
  576. M_PART_ERROR_CYL
  577.  Max cylinder is %u. 
  578. M_PART_ERROR_NEG
  579.  This size of the partition must be positive.
  580. M_PART_ERROR_SIZE
  581.  Maximum Partition size is %u.
  582. M_PART_EXTDOS
  583. ExtDOS
  584. M_PART_HDR
  585.  Type      Start    End   Megs
  586. M_PART_NOBOOT
  587. Non-Bootable
  588. M_PART_OTHER    
  589. Non-DOS
  590. M_PART_OVERLAP4
  591. Partitions Overlapped.
  592. M_READ&
  593.  Read Command.
  594. M_READ_CAP%
  595.  Read Capacity Command.
  596. M_REBOOT,
  597. Please reboot the system to save the changes made.  PRESS <CTRL><ALT><DEL> to continue.
  598. M_SCSI_NO_DEVICE
  599. No SCSI disk drives were found.
  600. M_START_PROMPT
  601. Start Cylinder: 
  602. M_VERIFY+
  603.  Verify Command.
  604. M_VERIFY_SYS_ERROR)
  605.  An error occurred when verifying the system sectors.  Please run diagnostics on the disk before using.  (Logical address %u to %u failed on target %u.)
  606. M_WRITE'
  607.  Write Command.
  608. M_YES
  609. PART_FORM_HELP_MESSAGE
  610. <F1> Help, <Esc> Save and Exit
  611. PART_LIST_HELP_MESSAGE
  612. <Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
  613. PART_VIEW_HELP_MESSAGE
  614. <Esc> Exit
  615. PROGRAM_SHORT_NAME
  616. AFDISK
  617. SCSI_LIST_HELP_MESSAGE
  618. <Enter> Select, <arrows> Up and Down, <F1> Help, <Esc> Exit
  619. <No Procedure>
  620. compare_null
  621. compare_text
  622. default_entry_proc
  623. lotus_entry_proc
  624. cworthy20_bug
  625. PartitionFormAction
  626.