C-Worthy (R) Form File Version 2.0
                                                                                                                                                                                                    
FORMCREATE_PARTITION
HELP_ABOVE_256
HELP_BAD_TRANSLATION
HELP_BETA_BANNER
HELP_CREATE_PARTITION
HELP_DATA_PROTECT
HELP_DELETE_PARTITION
HELP_DIVIDE_256MB
HELP_INTERNAL_256MB
HELP_NOT_READY
HELP_OLD_ASPI	
HELP_PART_FORM
HELP_PART_LIST
HELP_SCSI_LIST
HELP_UNDER_BIOS
HELP_UNIT_ATTENTION
<No Help Context>
Create a DOS PartitionHELP_PART_FORMPartitionFormAction	
START_CYLINTEGERStart Cylinder:
0..32767
END_CYLINDERINTEGEREnd Cylinder:
0..32767
ABANDON_CHANGES
Abandon Changes
ALIGNCHANGEDLIST_EL_NOT_FOUND
AlignChangedList was called with the element "%s", but that element was not found in the currently selected list.
ALIGNLISTDISPLAY_EL_NOT_FOUND
AlignListDisplay was called with the element "%s", but that element was not found in the currently selected list.
ALREADY_IN_HELP
No More Help Available.
ANTE_MERIDIAN
BAD_FILE_HANDLE_TABLE_SIZE
An attempt to allocate %d file handles failed, must be in the range of 5 to 260.
BAD_HELP_FILE_HEADERY
The help file "%s" is the wrong version.
BAD_PARAMETERS
Invalid parameters encountered.
CANCEL_CHANGESP
Cancel All Changes
CHECKHEADER_READ_ERROR
A read error occurred while reading the data file.
CHECKHEADER_WRONG_TYPE
The data file was not of the correct type.
CHECKHEADER_WRONG_VERSION
The data file format is the wrong version.
CLOSE_FAILURE
An attempt to close the file "%s" failed.
CLOSE_FILE_FAILED
An attempt to close a file in the extended table failed.
CLOSE_INVALID_HANDLEN
An attempt to close the file "%s" failed because the specified file handle is invalid.
COUNTRY_FAILURE_
An attempt to get the DOS country information failed.
COUNTRY_FILE_NOT_FOUNDD
An attempt to get the DOS country information failed because the alternate keyboard handler file was not found.
CREATE_DIR_ACCESS_DENIED\
An attempt to create the directory "%s" failed because access was denied.
CREATE_DIR_PATH_NOT_FOUND[
An attempt to create the directory "%s" failed because the specified path was not found.
CREATE_FILE_ACCESS_DENIEDS
An attempt to create the file "%s" failed because access was denied.
CREATE_FILE_FAILUREF
An attempt to create the file "%s" failed.
CREATE_FILE_PATH_NOT_FOUNDQ
An attempt to create the file "%s" failed because the specified directory was not found.
CREATE_FILE_TO_MANY_OPEN_FILESR
An attempt to create the file "%s" failed because there are too many open files.
CUT_TOO_BIGU
The Marked Block Is Too Big For Available Memory.
DAY_FRIDAY?
Friday
DAY_MONDAY;
Monday
DAY_SATURDAY@
Saturday
DAY_SUNDAY:
Sunday
DAY_THURSDAY>
Thursday
DAY_TUESDAY<
Tuesday
DAY_WEDNESDAY=
Wednesday
DELETEDIRECTORY_ERROR_IN_USE
An attempt was made to delete directory "%s", but the directory is currently being used by another station.
DIRECTORY_ALREADY_EXISTS
The directory "%s" already exists.
DISK_ERROR_HEADER
Disk Error Drive:  
DISPLAYHEADER_FAILURE
The attempt to display the utility header, with the current date and time, failed.
DISPLAYTEXTINPORTAL_DOESNT_FIT_
The text to be displayed in the current portal was too long to fit in the portal.
DISPLAYTEXTINPORTAL_NO_PORTAL`
There is not a currently selected portal in which to display the text.
DUP_HANDLE_FAILURE`
An attempt to duplicate a file handle failed.
DUP_HANDLE_INVALID_HANDLEJ
An attempt to duplicate a file handle failed because the specified file handle was invalid.
DUP_HANDLE_TO_MANY_OPEN_FILESI
An attempt to duplicate a file handle failed because there are too many open files.
EDITPORTALSTRING_BAD_STRINGH
The string that was passed to EditPortalString was longer than the maximum length allowed.  Possibly the string was not properly initialized.
ERROR_CANT_CREATE_ERROR_PORTAL
The error portal could not be created during program initialization.
ERROR_DESCRIPTION_HEADER
DESCRIPTION
ERROR_DESCRIPTION_NOT_AVAILABLE
The description for this error is not available.
ERROR_ERROR_HEADER
ERROR
ERROR_PORTAL_HEADER
Error Report
ERROR_REPORT_HEADER
              *** ERROR REPORT ***
ERROR_RETURNED_CODE_OF
%s returned an error code of %d.
ERROR_SEVERITY_FATAL
Further program execution is not possible.
ERROR_SEVERITY_HEADER
SEVERITY
ERROR_SEVERITY_INFORM
Program execution should continue normally.
ERROR_SEVERITY_WARNING
The current operation cannot be completed.
ERROR_SYSTEM_FILE_MISSING
The system error library file "%s" is missing.
ETC_TEXTI
EXITG
F_ANSWERED
Answered
F_CANCEL_ALL_CHANGES
Cancel All Changes And Exit
F_CANCEL_EDIT
Cancel Edit
F_CONTINUE_EDIT
Continue Edit
F_EDIT_FIRST_UNANSWERED
Edit First Unanswered Field
F_EDIT_UNANSWERED
Edit Unanswered Field	
F_INVALID
Invalid
F_LEAVE_INVALID
Leave Invalid
F_LEAVE_UNANSWERED
Leave Unanswered
F_MANY_REQUIRED_FIELDS
There are %d required fields that have not been answered.
F_MARK_FIELD
Mark Field
F_ONE_REQUIRED_FIELD
There is 1 required field that has not been answered.
F_TENTATIVE
Tentative	
F_THROUGH
through
F_UNANSWERED
Unanswered
F_VALUE_NOT_VALID
%s is not valid.  The value must be in the range 
FAILED_APPEND_TO_LIST
An attempt to allocate additional memory to add element "%s" to the current list was unsuccessful.
FREE_FAILURE%
An attempt to free a section of memory that was previously allocated failed.
FUNCTIONAL_HELP_HEADER
The function key assignments on your machine are:
GETERROR_DELETED_ERRORr
GetError was called, but the specified procedure has been deleted.
GETLISTHEAD_FAILURE!
An attempt was made to get the first element in a list and the list was empty.
GETLISTINDEX_ELEMENT_NOT_FOUND
GetListIndex was called with the element "%s", but that element was not found in the currently selected list.
GETLISTTAIL_FAILURE"
An attempt was made to get the last element in a list and the list was empty.
GETMESSAGE_DELETED_MESSAGEp
GetMessage was called, but the requested system message has been deleted.
GETMESSAGE_NO_MESSAGEo
GetMessage was called, but no message was specified.
GETPORTALINFO_NO_PORTALE
An attempt was made to get the current portals information, and there was not a currently selected portal.
HEADER_MESSAGE_TOO_WIDEb
The combined width of the program header and the version number is greater than 34.  This means that the header will be overwritten by the date and time for certain days in certain months (ie. Wednesdays in September).  Please shorten the header message.
HELP_CONTEXT_STACK_EMPTY
An attempt was made to return to the previous help context, but there is no previous help context on the help context stack.
HELP_CONTEXT_STACK_FULL
PushHelpContext was called to push the help context number %d, but the help context stack is already full.
HELP_DEFAULT_TEXT^
No application specific help is available at this point.  Pressing the HELP key again will display a list of the function key assignments on your machine.
HELP_ESCAPE_DESCRIPTIONk
Exits help.
HELP_HELP_DESCRIPTIONi
Displays a list of the function key assignments on your machine.
HELP_HELP_HEADERc
The following keys are available while viewing help:
HELP_PDOWN_DESCRIPTIONg
Moves to the next help screen.
HELP_PUP_DESCRIPTIONe
Backs up to the previous help screen.
INITHELP_READ_ERROR\
The Help Librarian Data File "%s" could not be read.  The help system will not be able to provide some contextual help for this utility.
INITHELP_UNABLE_TO_OPEN_FILE[
The Help Librarian Data File "%s" could not be found.  The help system will not be able to provide some contextual help for this utility.
INITHELP_WRONG_VERSION]
The Help Librarian Data File "%s" is the wrong version.  The help system will not be able to provide some contextual help for this utility.
INVALID_DRIVE
An invalid drive was used.
INVALID_DYNAMIC_MESSAGE_NUMBERX
An attempt was made to set Dynamic Message Number %d.  There is no such dynamic message pointer.
INVALID_HELP_CONTEXT
An attempt was made to set the help context to number %d, but there are only %d help contexts defined (help context numbers are zero based).
KEY_BACK_DESCRIPTIONy
Delete the character to the left of the cursor.
KEY_BACK_NAMEx
BACKSPACE
KEY_CANCEL_DESCRIPTIONw
Cancel markings or edit changes.
KEY_CANCEL_NAMEv
CANCEL
KEY_CYCLE_DESCRIPTION
Cycle through menus or screens.
KEY_CYCLE_NAME
CYCLE
KEY_DELETE_DESCRIPTION|
Delete an item.
KEY_DELETE_NAME}
DELETE
KEY_DOWN_DESCRIPTION
Move down one line.
KEY_DOWN_NAME
KEY_ESCAPE_DESCRIPTIONs
Back up to the previous level.
KEY_ESCAPE_NAMEj
ESCAPE
KEY_EXIT_DESCRIPTIONu
Exit the program.
KEY_EXIT_NAMEt
KEY_FLEFT_DESCRIPTION
Move left one field or word.
KEY_FLEFT_NAME
FIELD LEFT
KEY_FRIGHT_DESCRIPTION
Move right one field or word.
KEY_FRIGHT_NAME
FIELD RIGHT
KEY_HELP_DESCRIPTION
Provide on-line help.
KEY_HELP_NAMEh
KEY_INSERT_DESCRIPTION{
Insert a new item.
KEY_INSERT_NAMEz
INSERT
KEY_LEFT_DESCRIPTION
Move left one position.
KEY_LEFT_NAME
KEY_MARK_DESCRIPTION
Toggle marking for current item.
KEY_MARK_NAME
KEY_MODE_DESCRIPTION
Change Modes.
KEY_MODE_NAME
KEY_MODIFY_DESCRIPTION
Rename/modify/edit the item.
KEY_MODIFY_NAME~
MODIFY
KEY_PDOWN_DESCRIPTION
Move down one page.
KEY_PDOWN_NAMEf
PAGE DOWN
KEY_PUP_DESCRIPTION
Move up one page.
KEY_PUP_NAMEd
PAGE UP
KEY_RIGHT_DESCRIPTION
Move right one position
KEY_RIGHT_NAME
RIGHT
KEY_SDOWN_DESCRIPTION
Move to the very end.
KEY_SDOWN_NAME
SPECIAL DOWN
KEY_SELECT_DESCRIPTION
Accept information entered or select the item.
KEY_SELECT_NAME
SELECT
KEY_SLEFT_DESCRIPTION
Move to the left-most position on the line.
KEY_SLEFT_NAME
SPECIAL LEFT
KEY_SRIGHT_DESCRIPTION
Move to the right-most position on the line.
KEY_SRIGHT_NAME
SPECIAL RIGHT
KEY_SUP_DESCRIPTION
Move to the very beginning.
KEY_SUP_NAME
SPECIAL UP
KEY_UP_DESCRIPTION
Move up one line.
KEY_UP_NAME
LIST_STACK_EMPTY
An attempt was made to pop a list from the list stack, and the list stack was empty.
LIST_STACK_FULL
An attempt was made to push a list on the list stack, and the list stack is already full.
LSEEK_FAILURE
An attempt to seek to a specific position in the file "%s" failed.
LSEEK_INVALID_HANDLEP
An attempt to seek to a specific position in the file "%s" failed because the handle is invalid.
LSEEK_INVALID_MODEO
An attempt to seek to a specific position in the file "%s" failed because the mode is invalid.
MALLOC_FAILURE
An attempt to allocate %u bytes of additional memory failed.
MARK_IS_ONT
No Insertions Allowed While Mark is On.
MENU_TOO_LARGE
The number of items in the current menu will not fit on the screen.
MONTH_APRIL1
April
MONTH_AUGUST5
August
MONTH_DECEMBER9
December
MONTH_FEBRUARY/
February
MONTH_JANUARY.
January
MONTH_JULY4
MONTH_JUNE3
MONTH_MARCH0
March	
MONTH_MAY2
MONTH_NOVEMBER8
November
MONTH_OCTOBER7
October
MONTH_SEPTEMBER6
September
NO_CHARS_MARKEDV
There are No Characters in the Marked Block.
NO_ERROR_RETURNED
No error is returned from this function call.
NO_RIGHT_CREATE_DIRECTORY
You have no rights to create the directory "%s".
NOT_FOUND_DIRECTORY
The specified directory cannot be found.
ON_FIRST_HELP_SCREENa
There is no preceding help screen.
ON_LAST_HELP_SCREENb
This is the last help screen.
OPEN_ACCESS_DENIEDW
An attempt to open the file "%s" failed because access was denied.
OPEN_FAILURE
An attempt to open the file "%s" failed.
OPEN_FILE_NOT_FOUNDT
An attempt to open the file "%s" failed because the specified file was not found.
OPEN_INVALID_ACCESS_CODEX
An attempt to open the file "%s" failed because the specified access code is invalid.
OPEN_PATH_NOT_FOUNDU
An attempt to open the file "%s" failed because the specified directory was not found.
OPEN_TO_MANY_OPEN_FILESV
An attempt to open the file "%s" failed because there are too many open files.
OVERLAY_NOT_FOUND
Unable to load overlay file "%s$RUN.OVL".
OVERLAY_READ_ERRORm
A read error occurred while reading the overlay file "%s$RUN.OVL".
OVERLAY_WRONG_VERSIONn
The overlay file "%s$RUN.OVL" is the wrong version for this utility.
PALEDIT_DEFAULT_PALETTE+
Default
PALEDIT_DELETE_CONFIRM
Delete Palette(s)?
PALEDIT_ERROR_PALETTE,
Error
PALEDIT_ESCAPE_MESSAGE
Press Escape to Exit
PALEDIT_GRAY&
  Gray
PALEDIT_HEADER-
Select Attribute
PALEDIT_HELP_PALETTEA
PALEDIT_INITIAL_PALETTEB
Initial
PALEDIT_INTENSE'
  Intense
PALEDIT_MUST_KEEP_ZEROC
Palette 0 may not be deleted.
PALEDIT_NO_MORE_SPACED
No more space available
PALEDIT_NORMAL)
  Normal
PALEDIT_PALETTE_HEADERJ
Palette List
PALEDIT_REVERSE
  Reverse
PALEDIT_SAMPLE_GRAYK
Gray Text
PALEDIT_SAMPLE_HEADERL
Text Style Samples
PALEDIT_SAMPLE_INTENSE
Intense Text
PALEDIT_SAMPLE_NORMALM
Normal Text
PALEDIT_SAMPLE_REVERSEN
Reverse Text
PALEDIT_SAMPLE_SHADOWW
Shadow Text
PALEDIT_SAVE_HEADERZ
Save Palette?
PALEDIT_SHADOW*
  Shadow
PALEDIT_UNTITLED_PALETTEl
PALEDIT_WARNING_PALETTE
Warning
PALETTE_STACK_EMPTY
The Palette Stack is Empty.
PALETTE_STACK_FULL
The Palette Stack is Full.
PASTE_BUF_EMPTYR
The Paste Buffer is Empty.
PORTAL_PCB_TABLE_FULL
The portal control block table is full, and an attempt was made to create another portal.
PORTAL_TOO_LARGE
An attempt was made to create a portal of height %d and width %d.
POST_MERIDIAN
PRESS_ESCAPE_TO_CONTINUE
--Press <Esc> to continue--
READ_ACCESS_DENIEDY
An attempt to read from the file "%s" failed because access was denied. The read request was for %u bytes.
READ_END_OF_FILE
An attempt to read from the file "%s" returned an end of file error. The read request was for %d bytes.
READ_FAILURE
An attempt to read from the file "%s" failed. The read request was for %u bytes.
READ_INVALID_HANDLEZ
An attempt to read from the file "%s" failed because the specified file handle was invalid. The read request was for %u bytes.
READ_WRONG_NUMBER
File "%s" should have had %u bytes read from it.
REMOVE_DIR_ACCESS_DENIEDL
An attempt to remove the directory "%s" failed because access was denied.
REMOVE_DIR_FAILUREa
An attempt to remove the directory "%s" failed.
REMOVE_DIR_INVALID_DRIVEM
An attempt to remove the directory "%s" failed because the specified drive is invalid.
REMOVE_DIR_PATH_NOT_FOUNDK
An attempt to remove the directory "%s" failed because the specified directory was not found.
REMOVE_FAILURE
An attempt to remove the file "%s" failed.
RENAME_ACCESS_DENIEDG
An attempt to rename the file "%s" to "%s" failed because access was denied.
RENAME_FAILURE
An attempt to rename the file "%s" to "%s" failed.
RENAME_FILE_NOT_FOUNDE
An attempt to rename the file "%s" to "%s" failed because the specified file was not found.
RENAME_NOT_SAME_DEVICEH
An attempt to rename the file "%s" to "%s" failed because the destination device was not the same.
RENAME_PATH_NOT_FOUNDF
An attempt to rename the file "%s" to "%s" failed because the specified path was not found.
RESTORELIST_FAILURE#
An attempt was made to restore the current list from an invalid list buffer number %d.
SAVE_CHANGESQ
Save Changes
SAVELIST_FAILURE$
An attempt was made to save the current list to an invalid list save buffer number %d.
SECURE_FIELD
This field is secure and cannot be edited.
SHORT_MONTH_APRIL
SHORT_MONTH_AUGUST
SHORT_MONTH_DECEMBER
SHORT_MONTH_FEBRUARY
SHORT_MONTH_JANUARY
SHORT_MONTH_JULY
SHORT_MONTH_JUNE
SHORT_MONTH_MARCH
SHORT_MONTH_MAY
SHORT_MONTH_NOVEMBER
SHORT_MONTH_OCTOBER
SHORT_MONTH_SEPTEMBER
Sept.
SORTFILE_READ;
An attempt to Read a record from the Source file failed.
SORTFILE_SEEK:
An attempt to Seek within the Source file failed.
SORTFILE_VERSION9
Version 3.0 Compiler Required
SORTFILE_WRITE<
An attempt to Write to the temporary file failed.
TEXT_BUF_FULLS
The Text Buffer Is Full.
TEXTEDIT_INPUT_TOO_LONGO
The procedure "EditText" failed because the default text was longer than the specified maximum length.
TRACE_EXIT_MESSAGE
Trace forced to exit because it could not create a portal.
TRACE_PORTAL_HEADER
Program Trace Portal
TYPE_UNDEFINED(
The current field type is not defined.
UNABLE_TO_ALLOCATE_MEMORY
An attempt to allocate additional memory was unsuccessful.
UNKNOWN_PROCEDUREq
An unknown procedure
UNLINK_ACCESS_DENIEDC
An attempt to unlink the file "%s" failed because access was denied.
UNLINK_FILE_NOT_FOUNDA
An attempt to unlink the file "%s" failed because the file was not found.
UNLINK_PATH_NOT_FOUNDB
An attempt to unlink the file "%s" failed because the specified path was not found.
WAIT_MESSAGE
Please Wait
WRITE_ACCESS_DENIED]
An attempt to write to the file "%s" failed because access was denied. The write request was for %u bytes.
WRITE_FAILURE 
An attempt to write to file "%s" failed. The write request was for %u bytes.
WRITE_INVALID_HANDLE^
An attempt to write to the file "%s" failed because the specified file handle was invalid. The write request was for %u bytes.
WRITE_WRONG_NUMBER
File "%s" should have had %d bytes written to it.
M_1024_CYL
AFDISK can only support drives with a max. of 1024 cylinders.  This drive has more cylinders than can be supported by AFDISK.  AFDISK will only use the first 1024 cylinders of this drive.
M_ABOVE_256MB
Data above 256MB
M_ASK_DIVIDE_256MB2
Choose Format Option
M_ASK_INTERNAL_256MB/
Partition and Format Data Above 256MB?
M_BELOW_256MB
Data below 256 MB
M_BELOW_OR_ABOVE
Select Part of Drive to Partition
M_CREATE_PARTITION7
Create Partition? - <F1> Help
M_DELETE_PARTITION
Delete Partition? - <F1> Help
M_DELETE_PARTITIONS
Delete Partitions? - <F1> Help
M_DISK_FULL
No more free space on the disk!
M_DIVIDE_256MB0
Divide the disk (DOS compatible format).
M_DOSFORM_HDR
Create a DOS Partition
M_DRIVE_INFO
Logical Drive Info
M_END_PROMPT
End Cylinder: 
M_ERROR_CHKSTAT"
 Check Status Returned.
M_ERROR_MALLOC-
 Not enough memory.
M_ERROR_SPI#
 Illegal Status from SCSI Manager.
M_ERROR_TIMEOUT!
 Timed out waiting for I/O completion.	
M_GET_DEV(
 Get Device Type Command.
M_HA_INQ3
ASPI Command Host Adapter Inquiry.	
M_INQUIRY$
 Inquiry Command. 
M_INSTALLED_DEVICES
  Select SCSI Device to Partition
M_IO_COMMAND.
 I/O Command.
M_IO_ERROR
!!! ERROR OCCURRED DURING IO OPERATION !!!
M_IO_ERROR_MESSAGE 
M_MAX_512
AFDISK can only support devices which use 512 bytes per sector.  Unable to partition the selected device.
M_MAX_PART5
Maximum Number of Partitions Reached!
M_NO_DIVIDE_256MB1
Do not divide the disk (proprietary format).
M_PART_BOOT
Bootable
M_PART_DOS*
M_PART_ERROR_CYL
 Max cylinder is %u. 
M_PART_ERROR_NEG
 This size of the partition must be positive.
M_PART_ERROR_SIZE
 Maximum Partition size is %u.
M_PART_EXTDOS
ExtDOS
M_PART_HDR
 Type      Start    End   Megs
M_PART_NOBOOT
Non-Bootable
M_PART_OTHER	
Non-DOS
M_PART_OVERLAP4
Partitions Overlapped.
M_READ&
 Read Command.
M_READ_CAP%
 Read Capacity Command.
M_REBOOT,
Please reboot the system to save the changes made.  PRESS <CTRL><ALT><DEL> to continue.
M_SCSI_NO_DEVICE
No SCSI disk drives were found.
M_START_PROMPT
Start Cylinder: 
M_VERIFY+
 Verify Command.
M_VERIFY_SYS_ERROR)
 An error occurred when verifying the system sectors.  Please run diagnostics on the disk before using.  (Logical address %u to %u failed on target %u.)
M_WRITE'
 Write Command.
M_YES
PART_FORM_HELP_MESSAGE
<F1> Help, <Esc> Save and Exit
PART_LIST_HELP_MESSAGE
<Ins> Create, <Del> Delete, <F1> Help, <Esc> Exit
PART_VIEW_HELP_MESSAGE
<Esc> Exit
PROGRAM_SHORT_NAME
AFDISK
SCSI_LIST_HELP_MESSAGE
<Enter> Select, <arrows> Up and Down, <F1> Help, <Esc> Exit
<No Procedure>
compare_null
compare_text
default_entry_proc
lotus_entry_proc
cworthy20_bug
PartitionFormAction