System Configuration Warning: ASPI ManagerINTR_ASPIOVFORM_ENT_PROC
ASPI_TEXTVTEXT
The Install Utility has detected that Adaptec's ASPI Manager program has not been installed yet. The ASW-410 CD-ROM device driver requires an ASPI Manager to be installed before it can load properly. It is suggested that you quit this installation and install the ASPI Manager first, or you may continue installing the CD-ROM driver and install the ASPI Manager at a later time.
The ASW-410 ASPI CD-ROM driver for DOS has now been successfully installed. To make these changes effective, you must reboot the computer by pressing <CTRL> <ALT> <DEL> after exiting this installation. If you chose to modify your AUTOEXEC.BAT and CONFIG.SYS files, the old files were saved as AUTOEXEC.SAV and CONFIG.SAV respectively. If you have not modified these files, you will need to modify them and reboot before running any CD-ROM applications.
BEXIT_1BUTTON
Press <Enter> to return to DOS
BEXIT_2BUTTON
<F1>=Help
Command Line Options: Microsoft CD-ROM Extensions (MSCDEX)
DRIVE_LETTERCHARACTERFirst Drive Letter Reserved for CD-ROM : ('D' to 'Z')DRIVE_FIELD
d..z/D..ZH
CACHE_BUFFERBYTENumber of Reserved Cache Sector Buffers: ( 8 to 15 )CACHE_FIELD
8..15
VERBOSEBOOLEANDisplay Verbose Messages during Booting: ('Y' or 'N')VERBOSE_FIELD
NoYes
EMS_USEDBOOLEANInstall MSCDEX.EXE in Expanded Memory : ('Y' or 'N')EMS_FIELD
NoYes
CDEXT_6BUTTON
<Enter>=Continue
CDEXT_5BUTTON
<Insert>=Edit
CDX_ESCBUTTON
<ESC>=Return to Previous Screen
CDEXT_0BUTTON
<Alt-F10>=Exit to DOS
CDEXT_7BUTTON
<F1>=Help
Total System CD-ROM Drive CountDRVCOUNT_FORM
DRVCNT_TEXTVTEXT,
The Install Utility requires you to tell it how many CD-ROM drives are installed in your system. This count is needed in order to correctly specify the LASTDRIVE statement in your CONFIG.SYS file. Below, you must enter the total number of CD-ROM drives in your system.
DRIVE_COUNTBYTETotal number of CD-ROM drives in your system: ( 1 to 7 )
SAMA_ENTERBUTTON
<Enter>=Continue
SAMA_INSBUTTON
<Insert>=Edit
SAMA_HELPBUTTON
<F1>=Help
SAMA_ESCBUTTON
<ESC>=Return to Previous Screen
SAMA_CANCELBUTTON
<Alt-F10>=Exit to DOS
CD-ROM Drive-Type Selection List: Select All Drives to be InstalledCDDRIVES_FORM
CHINONBOOLEANChinon: ('Y' or 'N')
NoYes
DECBOOLEANDEC: ('Y' or 'N')
NoYes
DENONBOOLEANDenon: ('Y' or 'N')
NoYes
HITACHIBOOLEANHitachi: ('Y' or 'N')
NoYes
LMSIBOOLEANLMSI: ('Y' or 'N')
NoYes
NECBOOLEANNEC: ('Y' or 'N')
NoYes
PANBOOLEANPanasonic: ('Y' or 'N')
NoYes
SONYBOOLEANSony: ('Y' or 'N')
NoYes
TOSHIBABOOLEANToshiba: ('Y' or 'N')
NoYes
GENERICBOOLEANGeneric Data: ('Y' or 'N')
NoYes
B_ENTERBUTTON
<Enter>=Continue
B_INSBUTTON
<Insert>=Edit
B_HELPBUTTON
<F1>=Help
DRV_ESCBUTTON
<ESC>=Return to Previous Screen
DRV_CANCELBUTTON
<Alt-F10>=Exit to DOS
ASW-410 Installation Directory Selection
DST_DIRSTRINGDestination Directory to Install Files:DEST_DIR
C:\ASW410
INST_DIR_3BUTTON
<Enter>=Continue
INST_DIR_2BUTTON
<Insert>=Edit
INST_DIR_4BUTTON
<F1>=Help
DIR_ESCBUTTON
<ESC>=Return to Previous Screen
INST_ABORTBUTTON
<Alt-F10>=Exit to DOS
Should the Install Utility modify the following files?
MCONFIGBOOLEANModify your current CONFIG.SYS? ('Y' or 'N')MCONFIG_FIELD
NoYes
MAUTOEXECBOOLEANModify your current AUTOEXEC.BAT? ('Y' or 'N')MAUTO_FIELD
NoYes
MODIFY_3BUTTON
<Enter>=Continue
MODIFY_2BUTTON
<Insert>=Edit
MODIFY_4BUTTON
<F1>=Help
MOD_ESCBUTTON
<ESC>=Return to Previous Screen
MOD_ABORTBUTTON
<Alt-F10>=Exit to DOS
Welcome to the Adaptec ASW-410 Installation Utility!OVER_FORMOVFORM_ENT_PROC
OVER_TEXTVTEXTOVER_FORMOVFORM_ENT_PROCq
The ASW-410 Install Utility provides an easy way for you to copy and install the ASW-410 ASPI CD-ROM driver for DOS onto your system. During this installation, you must specify your system's destination directory in which to copy the selected CD-ROM drivers and the provided Microsoft CD-ROM DOS Extensions (MSCDEX). You also must select which CD-ROM drive types your system uses from a list of drivers supported by the ASW-410. The MSCDEX command line options must also be specified. Finally, it will optionally modify your AUTOEXEC.BAT and CONFIG.SYS files to install the ASW-410 on your system.
Since you instructed the Install Utility not to modify your AUTOEXEC.BAT file, it could create a sample file named AUTOEXEC.ADP as an example of what those modifications might look like.
Since you instructed the Install Utility not to modify your CONFIG.SYS file, it could create a sample file named CONFIG.ADP as an example of what those modifications might look like.
CNFADPBOOLEANCreate CONFIG.ADP? ('Y' or 'N')
NoYes
SAMPLECNF_2BUTTON
<Enter>=Continue
SAMPLECNF_3BUTTON
<Insert>=Edit
SAMPLECNF_4BUTTON
<F1>=Help
SAMPLECNF_5BUTTON
<ESC>=Return to Previous Screen
SAMPLECNF_6BUTTON
<Alt-F10>=Exit to DOS
ABANDON_CHANGES
Abandon Changes
ALIGNCHANGEDLIST_EL_NOT_FOUND
AlignChangedList was called with the element "%s", but that element was not found in the currently selected list.
ALIGNLISTDISPLAY_EL_NOT_FOUND
AlignListDisplay was called with the element "%s", but that element was not found in the currently selected list.
ALREADY_IN_HELP
No More Help Available.
ANTE_MERIDIAN
BAD_FILE_HANDLE_TABLE_SIZE
An attempt to allocate %d file handles failed, must be in the range of 5 to 260.
BAD_HELP_FILE_HEADERY
The help file "%s" is the wrong version.
BAD_PARAMETERS
Invalid parameters encountered.
CANCEL_CHANGESP
Cancel All Changes
CHECKHEADER_READ_ERROR
A read error occurred while reading the data file.
CHECKHEADER_WRONG_TYPE
The data file was not of the correct type.
CHECKHEADER_WRONG_VERSION
The data file format is the wrong version.
CLOSE_FAILURE
An attempt to close the file "%s" failed.
CLOSE_FILE_FAILED
An attempt to close a file in the extended table failed.
CLOSE_INVALID_HANDLEN
An attempt to close the file "%s" failed because the specified file handle is invalid.
COUNTRY_FAILURE_
An attempt to get the DOS country information failed.
COUNTRY_FILE_NOT_FOUNDD
An attempt to get the DOS country information failed because the alternate keyboard handler file was not found.
CREATE_DIR_ACCESS_DENIED\
An attempt to create the directory "%s" failed because access was denied.
CREATE_DIR_PATH_NOT_FOUND[
An attempt to create the directory "%s" failed because the specified path was not found.
CREATE_FILE_ACCESS_DENIEDS
An attempt to create the file "%s" failed because access was denied.
CREATE_FILE_FAILUREF
An attempt to create the file "%s" failed.
CREATE_FILE_PATH_NOT_FOUNDQ
An attempt to create the file "%s" failed because the specified directory was not found.
CREATE_FILE_TO_MANY_OPEN_FILESR
An attempt to create the file "%s" failed because there are too many open files.
CUT_TOO_BIGU
The Marked Block Is Too Big For Available Memory.
DAY_FRIDAY?
Friday
DAY_MONDAY;
Monday
DAY_SATURDAY@
Saturday
DAY_SUNDAY:
Sunday
DAY_THURSDAY>
Thursday
DAY_TUESDAY<
Tuesday
DAY_WEDNESDAY=
Wednesday
DELETEDIRECTORY_ERROR_IN_USE
An attempt was made to delete directory "%s", but the directory is currently being used by another station.
DIRECTORY_ALREADY_EXISTS
The directory "%s" already exists.
DISK_ERROR_HEADER
Disk Error Drive:
DISPLAYHEADER_FAILURE
The attempt to display the utility header, with the current date and time, failed.
DISPLAYTEXTINPORTAL_DOESNT_FIT_
The text to be displayed in the current portal was too long to fit in the portal.
DISPLAYTEXTINPORTAL_NO_PORTAL`
There is not a currently selected portal in which to display the text.
DUP_HANDLE_FAILURE`
An attempt to duplicate a file handle failed.
DUP_HANDLE_INVALID_HANDLEJ
An attempt to duplicate a file handle failed because the specified file handle was invalid.
DUP_HANDLE_TO_MANY_OPEN_FILESI
An attempt to duplicate a file handle failed because there are too many open files.
EDITPORTALSTRING_BAD_STRINGH
The string that was passed to EditPortalString was longer than the maximum length allowed. Possibly the string was not properly initialized.
ERROR_CANT_CREATE_ERROR_PORTAL
The error portal could not be created during program initialization.
ERROR_DESCRIPTION_HEADER
DESCRIPTION
ERROR_DESCRIPTION_NOT_AVAILABLE
The description for this error is not available.
ERROR_ERROR_HEADER
ERROR
ERROR_PORTAL_HEADER
Error Report
ERROR_REPORT_HEADER
*** ERROR REPORT ***
ERROR_RETURNED_CODE_OF
%s returned an error code of %d.
ERROR_SEVERITY_FATAL
Further program execution is not possible.
ERROR_SEVERITY_HEADER
SEVERITY
ERROR_SEVERITY_INFORM
Program execution should continue normally.
ERROR_SEVERITY_WARNING
The current operation cannot be completed.
ERROR_SYSTEM_FILE_MISSING
The system error library file "%s" is missing.
ETC_TEXTI
EXITG
F_ANSWERED
Answered
F_CANCEL_ALL_CHANGES
Cancel All Changes And Exit
F_CANCEL_EDIT
Cancel Edit
F_CONTINUE_EDIT
Continue Edit
F_EDIT_FIRST_UNANSWERED
Edit First Unanswered Field
F_EDIT_UNANSWERED
Edit Unanswered Field
F_INVALID
Invalid
F_LEAVE_INVALID
Leave Invalid
F_LEAVE_UNANSWERED
Leave Unanswered
F_MANY_REQUIRED_FIELDS
There are %d required fields that have not been answered.
F_MARK_FIELD
Mark Field
F_ONE_REQUIRED_FIELD
There is 1 required field that has not been answered.
F_TENTATIVE
Tentative
F_THROUGH
through
F_UNANSWERED
Unanswered
F_VALUE_NOT_VALID
%s is not valid. The value must be in the range
FAILED_APPEND_TO_LIST
An attempt to allocate additional memory to add element "%s" to the current list was unsuccessful.
FREE_FAILURE%
An attempt to free a section of memory that was previously allocated failed.
FUNCTIONAL_HELP_HEADER
The function key assignments on your machine are:
GETERROR_DELETED_ERRORr
GetError was called, but the specified procedure has been deleted.
GETLISTHEAD_FAILURE!
An attempt was made to get the first element in a list and the list was empty.
GETLISTINDEX_ELEMENT_NOT_FOUND
GetListIndex was called with the element "%s", but that element was not found in the currently selected list.
GETLISTTAIL_FAILURE"
An attempt was made to get the last element in a list and the list was empty.
GETMESSAGE_DELETED_MESSAGEp
GetMessage was called, but the requested system message has been deleted.
GETMESSAGE_NO_MESSAGEo
GetMessage was called, but no message was specified.
GETPORTALINFO_NO_PORTALE
An attempt was made to get the current portals information, and there was not a currently selected portal.
HEADER_MESSAGE_TOO_WIDEb
The combined width of the program header and the version number is greater than 34. This means that the header will be overwritten by the date and time for certain days in certain months (ie. Wednesdays in September). Please shorten the header message.
HELP_CONTEXT_STACK_EMPTY
An attempt was made to return to the previous help context, but there is no previous help context on the help context stack.
HELP_CONTEXT_STACK_FULL
PushHelpContext was called to push the help context number %d, but the help context stack is already full.
HELP_DEFAULT_TEXT^
No application specific help is available at this point. Pressing the HELP key again will display a list of the function key assignments on your machine.
HELP_ESCAPE_DESCRIPTIONk
Exits help.
HELP_HELP_DESCRIPTIONi
Displays a list of the function key assignments on your machine.
HELP_HELP_HEADERc
The following keys are available while viewing help:
HELP_PDOWN_DESCRIPTIONg
Moves to the next help screen.
HELP_PUP_DESCRIPTIONe
Backs up to the previous help screen.
INITHELP_READ_ERROR\
The Help Librarian Data File "%s" could not be read. The help system will not be able to provide some contextual help for this utility.
INITHELP_UNABLE_TO_OPEN_FILE[
The Help Librarian Data File "%s" could not be found. The help system will not be able to provide some contextual help for this utility.
INITHELP_WRONG_VERSION]
The Help Librarian Data File "%s" is the wrong version. The help system will not be able to provide some contextual help for this utility.
INVALID_DRIVE
An invalid drive was used.
INVALID_DYNAMIC_MESSAGE_NUMBERX
An attempt was made to set Dynamic Message Number %d. There is no such dynamic message pointer.
INVALID_HELP_CONTEXT
An attempt was made to set the help context to number %d, but there are only %d help contexts defined (help context numbers are zero based).
KEY_BACK_DESCRIPTIONy
Delete the character to the left of the cursor.
KEY_BACK_NAMEx
BACKSPACE
KEY_CANCEL_DESCRIPTIONw
Cancel markings or edit changes.
KEY_CANCEL_NAMEv
CANCEL
KEY_CYCLE_DESCRIPTION
Cycle through menus or screens.
KEY_CYCLE_NAME
CYCLE
KEY_DELETE_DESCRIPTION|
Delete an item.
KEY_DELETE_NAME}
DELETE
KEY_DOWN_DESCRIPTION
Move down one line.
KEY_DOWN_NAME
KEY_ESCAPE_DESCRIPTIONs
Back up to the previous level.
KEY_ESCAPE_NAMEj
ESCAPE
KEY_EXIT_DESCRIPTIONu
Exit the program.
KEY_EXIT_NAMEt
KEY_FLEFT_DESCRIPTION
Move left one field or word.
KEY_FLEFT_NAME
FIELD LEFT
KEY_FRIGHT_DESCRIPTION
Move right one field or word.
KEY_FRIGHT_NAME
FIELD RIGHT
KEY_HELP_DESCRIPTION
Provide on-line help.
KEY_HELP_NAMEh
KEY_INSERT_DESCRIPTION{
Insert a new item.
KEY_INSERT_NAMEz
INSERT
KEY_LEFT_DESCRIPTION
Move left one position.
KEY_LEFT_NAME
KEY_MARK_DESCRIPTION
Toggle marking for current item.
KEY_MARK_NAME
KEY_MODE_DESCRIPTION
Change Modes.
KEY_MODE_NAME
KEY_MODIFY_DESCRIPTION
Rename/modify/edit the item.
KEY_MODIFY_NAME~
MODIFY
KEY_PDOWN_DESCRIPTION
Move down one page.
KEY_PDOWN_NAMEf
PAGE DOWN
KEY_PUP_DESCRIPTION
Move up one page.
KEY_PUP_NAMEd
PAGE UP
KEY_RIGHT_DESCRIPTION
Move right one position
KEY_RIGHT_NAME
RIGHT
KEY_SDOWN_DESCRIPTION
Move to the very end.
KEY_SDOWN_NAME
SPECIAL DOWN
KEY_SELECT_DESCRIPTION
Accept information entered or select the item.
KEY_SELECT_NAME
SELECT
KEY_SLEFT_DESCRIPTION
Move to the left-most position on the line.
KEY_SLEFT_NAME
SPECIAL LEFT
KEY_SRIGHT_DESCRIPTION
Move to the right-most position on the line.
KEY_SRIGHT_NAME
SPECIAL RIGHT
KEY_SUP_DESCRIPTION
Move to the very beginning.
KEY_SUP_NAME
SPECIAL UP
KEY_UP_DESCRIPTION
Move up one line.
KEY_UP_NAME
LIST_STACK_EMPTY
An attempt was made to pop a list from the list stack, and the list stack was empty.
LIST_STACK_FULL
An attempt was made to push a list on the list stack, and the list stack is already full.
LSEEK_FAILURE
An attempt to seek to a specific position in the file "%s" failed.
LSEEK_INVALID_HANDLEP
An attempt to seek to a specific position in the file "%s" failed because the handle is invalid.
LSEEK_INVALID_MODEO
An attempt to seek to a specific position in the file "%s" failed because the mode is invalid.
MALLOC_FAILURE
An attempt to allocate %u bytes of additional memory failed.
MARK_IS_ONT
No Insertions Allowed While Mark is On.
MENU_TOO_LARGE
The number of items in the current menu will not fit on the screen.
MONTH_APRIL1
April
MONTH_AUGUST5
August
MONTH_DECEMBER9
December
MONTH_FEBRUARY/
February
MONTH_JANUARY.
January
MONTH_JULY4
MONTH_JUNE3
MONTH_MARCH0
March
MONTH_MAY2
MONTH_NOVEMBER8
November
MONTH_OCTOBER7
October
MONTH_SEPTEMBER6
September
NO_CHARS_MARKEDV
There are No Characters in the Marked Block.
NO_ERROR_RETURNED
No error is returned from this function call.
NO_RIGHT_CREATE_DIRECTORY
You have no rights to create the directory "%s".
NOT_FOUND_DIRECTORY
The specified directory cannot be found.
ON_FIRST_HELP_SCREENa
There is no preceding help screen.
ON_LAST_HELP_SCREENb
This is the last help screen.
OPEN_ACCESS_DENIEDW
An attempt to open the file "%s" failed because access was denied.
OPEN_FAILURE
An attempt to open the file "%s" failed.
OPEN_FILE_NOT_FOUNDT
An attempt to open the file "%s" failed because the specified file was not found.
OPEN_INVALID_ACCESS_CODEX
An attempt to open the file "%s" failed because the specified access code is invalid.
OPEN_PATH_NOT_FOUNDU
An attempt to open the file "%s" failed because the specified directory was not found.
OPEN_TO_MANY_OPEN_FILESV
An attempt to open the file "%s" failed because there are too many open files.
OVERLAY_NOT_FOUND
Unable to load overlay file "%s$RUN.OVL".
OVERLAY_READ_ERRORm
A read error occurred while reading the overlay file "%s$RUN.OVL".
OVERLAY_WRONG_VERSIONn
The overlay file "%s$RUN.OVL" is the wrong version for this utility.
PALEDIT_DEFAULT_PALETTE+
Default
PALEDIT_DELETE_CONFIRM
Delete Palette(s)?
PALEDIT_ERROR_PALETTE,
Error
PALEDIT_ESCAPE_MESSAGE
Press Escape to Exit
PALEDIT_GRAY&
Gray
PALEDIT_HEADER-
Select Attribute
PALEDIT_HELP_PALETTEA
PALEDIT_INITIAL_PALETTEB
Initial
PALEDIT_INTENSE'
Intense
PALEDIT_MUST_KEEP_ZEROC
Palette 0 may not be deleted.
PALEDIT_NO_MORE_SPACED
No more space available
PALEDIT_NORMAL)
Normal
PALEDIT_PALETTE_HEADERJ
Palette List
PALEDIT_REVERSE
Reverse
PALEDIT_SAMPLE_GRAYK
Gray Text
PALEDIT_SAMPLE_HEADERL
Text Style Samples
PALEDIT_SAMPLE_INTENSE
Intense Text
PALEDIT_SAMPLE_NORMALM
Normal Text
PALEDIT_SAMPLE_REVERSEN
Reverse Text
PALEDIT_SAMPLE_SHADOWW
Shadow Text
PALEDIT_SAVE_HEADERZ
Save Palette?
PALEDIT_SHADOW*
Shadow
PALEDIT_UNTITLED_PALETTEl
PALEDIT_WARNING_PALETTE
Warning
PALETTE_STACK_EMPTY
The Palette Stack is Empty.
PALETTE_STACK_FULL
The Palette Stack is Full.
PASTE_BUF_EMPTYR
The Paste Buffer is Empty.
PORTAL_PCB_TABLE_FULL
The portal control block table is full, and an attempt was made to create another portal.
PORTAL_TOO_LARGE
An attempt was made to create a portal of height %d and width %d.
POST_MERIDIAN
PRESS_ESCAPE_TO_CONTINUE
--Press <Esc> to continue--
READ_ACCESS_DENIEDY
An attempt to read from the file "%s" failed because access was denied. The read request was for %u bytes.
READ_END_OF_FILE
An attempt to read from the file "%s" returned an end of file error. The read request was for %d bytes.
READ_FAILURE
An attempt to read from the file "%s" failed. The read request was for %u bytes.
READ_INVALID_HANDLEZ
An attempt to read from the file "%s" failed because the specified file handle was invalid. The read request was for %u bytes.
READ_WRONG_NUMBER
File "%s" should have had %u bytes read from it.
REMOVE_DIR_ACCESS_DENIEDL
An attempt to remove the directory "%s" failed because access was denied.
REMOVE_DIR_FAILUREa
An attempt to remove the directory "%s" failed.
REMOVE_DIR_INVALID_DRIVEM
An attempt to remove the directory "%s" failed because the specified drive is invalid.
REMOVE_DIR_PATH_NOT_FOUNDK
An attempt to remove the directory "%s" failed because the specified directory was not found.
REMOVE_FAILURE
An attempt to remove the file "%s" failed.
RENAME_ACCESS_DENIEDG
An attempt to rename the file "%s" to "%s" failed because access was denied.
RENAME_FAILURE
An attempt to rename the file "%s" to "%s" failed.
RENAME_FILE_NOT_FOUNDE
An attempt to rename the file "%s" to "%s" failed because the specified file was not found.
RENAME_NOT_SAME_DEVICEH
An attempt to rename the file "%s" to "%s" failed because the destination device was not the same.
RENAME_PATH_NOT_FOUNDF
An attempt to rename the file "%s" to "%s" failed because the specified path was not found.
RESTORELIST_FAILURE#
An attempt was made to restore the current list from an invalid list buffer number %d.
SAVE_CHANGESQ
Save Changes
SAVELIST_FAILURE$
An attempt was made to save the current list to an invalid list save buffer number %d.
SECURE_FIELD
This field is secure and cannot be edited.
SHORT_MONTH_APRIL
SHORT_MONTH_AUGUST
SHORT_MONTH_DECEMBER
SHORT_MONTH_FEBRUARY
SHORT_MONTH_JANUARY
SHORT_MONTH_JULY
SHORT_MONTH_JUNE
SHORT_MONTH_MARCH
SHORT_MONTH_MAY
SHORT_MONTH_NOVEMBER
SHORT_MONTH_OCTOBER
SHORT_MONTH_SEPTEMBER
Sept.
SORTFILE_READ;
An attempt to Read a record from the Source file failed.
SORTFILE_SEEK:
An attempt to Seek within the Source file failed.
SORTFILE_VERSION9
Version 3.0 Compiler Required
SORTFILE_WRITE<
An attempt to Write to the temporary file failed.
TEXT_BUF_FULLS
The Text Buffer Is Full.
TEXTEDIT_INPUT_TOO_LONGO
The procedure "EditText" failed because the default text was longer than the specified maximum length.
TRACE_EXIT_MESSAGE
Trace forced to exit because it could not create a portal.
TRACE_PORTAL_HEADER
Program Trace Portal
TYPE_UNDEFINED(
The current field type is not defined.
UNABLE_TO_ALLOCATE_MEMORY
An attempt to allocate additional memory was unsuccessful.
UNKNOWN_PROCEDUREq
An unknown procedure
UNLINK_ACCESS_DENIEDC
An attempt to unlink the file "%s" failed because access was denied.
UNLINK_FILE_NOT_FOUNDA
An attempt to unlink the file "%s" failed because the file was not found.
UNLINK_PATH_NOT_FOUNDB
An attempt to unlink the file "%s" failed because the specified path was not found.
WAIT_MESSAGE
Please Wait
WRITE_ACCESS_DENIED]
An attempt to write to the file "%s" failed because access was denied. The write request was for %u bytes.
WRITE_FAILURE
An attempt to write to file "%s" failed. The write request was for %u bytes.
WRITE_INVALID_HANDLE^
An attempt to write to the file "%s" failed because the specified file handle was invalid. The write request was for %u bytes.
The installation directory cannot be created because its parent directory does not exist.
DISP_COPY_MESSAGE
Copying file %s to %s ....
DRIVE_IN_USE$
The drive letter you selected for the CD-ROM is already in use. To change your selection, press <ESC> to clear this message, then press <ESC> again to re-display the Microsoft CD-ROM Extensions screen.
DRIVE_NOT_VALID
The specified drive letter is not valid.
DRIVE_VENDOR_HEADER
CD-ROM DRIVE VENDOR
DRIVER_NOT_FOUND
The Install Utility either could not find the driver you specified, or no selection was made. Please make your choice again.
EXIT_MSG
Goodbye!!
FILE_NOT_CLOSE
File cannot be closed!
FILE_NOT_OPEN
File cannot be opened!
FILE_NOT_READ#
File cannot be read!
FILE_NOT_RENAME
File annot be renamed!
MODADPAUT_TEXT&
Writing .....AUTOEXEC.ADP
MODADPCNF_TEXT%
Writing .....CONFIG.ADP
MODAUT_TEXT
Modifying ....AUTOEXEC.BAT
MODCNF_TEXT
Modifying ....CONFIG.SYS
MSCDEX_NOT_FOUND
The Install Utility could not find the MSCDEX.EXE file. Please check that it is located in the same directory as the Install Utility.
MSCOPY_TEXT
Copying ....MSCDEX.EXE
NO_ASPI_MGR
The Install Utility has determined that Adaptec's ASPI Manager has not been installed yet. The CD-ROM driver requires this manager. Press <ESC> to return to the command line. Please install the ASPI Manager before proceeding.
NO_DRIVE_LETTER
No drive letter is specified in your directory.
NO_DRV_SELECTED
No drive type was selected. Please make a selection to continue.
PATH_TOO_LONG
Cannot get the current working directory because its pathname is too long.
(.txt)