home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Media Share 9
/
MEDIASHARE_09.ISO
/
hamradio
/
mb1501a.zip
/
MB1501X.EXE
/
YTNC.DOC
< prev
Wrap
Text File
|
1992-11-22
|
1KB
|
45 lines
YTNC is a "backend" for the G8BPQ switch.
It works in a similar manner to, and has the same command line
arguments as the G8BPQ supplied equivalent BPQHTNC2.
YTNC <number of COM ports> <first COM port> <first BPQ host port>
Examples:
YTNC 25 1 1
Create 25 COM ports numbered COM1 through COM25, using the first 25 host ports.
YTNC 3 12 19
Create 3 COM ports numbered COM12 through COM14, using host ports 19 - 21.
YTNC does not support unproto or monitoring, and has a minimal command set:
CONVerse - Change stream to Converse mode.
Trans - Change stream to Transparent mode.
^C - Change stream to Command mode. (send break does same)
Connect - Return stream connect status.
Connect CALL - Connect application to callsign.
Disconne - Disconnect application from switch.
K - Connect application to switch.
APPLFlag - Set application flags.
APPL - Set application mask.
BText - Set beacon text.
CONOk - ON/OFF - Allow/disallow connects from users.
CPactime - ON/OFF - Enable packetize-on-inactivity timer for CONV mode.
CR - ON/OFF - SENDP character included/not included in packet.
Paclen - Set packet size.
SEndp - Character that will force tx of packet.
YTNC resets PACLEN to the node default at disconnect.
On the COM port side, YTNC supports the normal DOS functions 1-7,
plus the G8BPQ-specific function 31.