home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
LivePix (Special Edition)
/
LIVEPIX.iso
/
mac
/
LivePix
/
Register
/
Register.rsrc
/
STR#_8022.txt
< prev
next >
Wrap
Text File
|
1996-11-20
|
2KB
|
127 lines
4|Exiting dial modem procedure because an error occurred; error = ^0; category = ^1.
4|Received ENQ.
4|Received NAK.
4|Received ACK.
4|Block ^0 bytes long after packetizing.
4|EOF detected after ^0 total bytes read from file.
4|^0 bytes read from file.
4|Error occured reading file; error = ^0.
4|Error occured opening file; error = ^0.
4|DTR asserted.
4|DTR negated.
4|Exiting wait procedure because an abort request was detected.
4|Exiting wait procedure because an error occurred; error = ^0; category = ^1.
4|Timed out waiting for response.
4|Found "^2" in input stream at buffer position ^0.
4|Scanning ^1 bytes in input buffer starting at position ^0.
4|Waiting for ^2 in input stream within ^0 60ths of a second.
4|Read ^0 bytes from the $P.
4|Input buffer overflow by ^0 bytes.
4|Error occured on read from serial port; error = ^0.
4|Error occured on write to serial port; error = ^0.
4|Error occured on serial port SerStatus call; error = ^0.
4|Timout occured on write while waiting for serial port.
4|Writing ^0 bytes to the $P.
4| ^2
4|The $P driver was successfully opened.
4|^0 error opening the $P input driver.
4|^0 error opening the $P output driver.
4|Closing the $P driver.
4|Opening the $P driver.
1|CRC data resource missing.
1|Transmission failed!
1|Transmission aborted!
1|Aborting transmission.
1|The modem is in use; Press and hold the Option key to force it open.
1|Unable to locate a modem!
1|Transmission successful!
2|Unable to hang up the modem!
2|Hang up successful.
1|Hanging up the modem.
2|Transmission failed!
2|Transmission successful.
1|Transmitting the information using EREG protocol.
2|Login successful.
2|Unable to get login verification.
3|Waiting for login verification.
1|Logging into the server.
1|Connected to the server.
1|Can not connect to server.
1|Connecting to the server.
3|The line is too noisy to transmit.
3|Checking for noise on the line.
3|Connected at $C baud.
2|The modem is unable to detect a dial tone.
2|The modem is unable to detect a carrier.
2|The line is busy.
2|Dial failed!
1|Dialing the modem.
3|Can't initialize the modem on the $P.
2|Modem found on the $P.
3|The $P is busy and was not forced open.
3|Switching to $B baud.
2|Looking for a modem on the $P at $B baud.