home *** CD-ROM | disk | FTP | other *** search
- +-------------------------------------------------------------+
- | II07094 |
- | |
- | COMMUNICATIONS MANAGER INFORMATION APAR |
- | |
- | HOW TO INSTALL NOVELL NETWARE NETVIEW ALERT SUPPORT |
- | WITH COMMUNICATION MANAGER/2 UPSTREAM OR DOWNSTREAM |
- | |
- |LAST UPDATE: 07/07/93 BY: GMB |
- | |
- |PURPOSE: THIS INFORMATION APAR PROVIDES INSTRUCTIONS ON HOW |
- | TO INSTALL THE NETVIEW ALERT SUPPORT CODE |
- | |
- +-------------------------------------------------------------+
- |
- |1. 06/29/93 REFERENCE PUBLICATION
- |
- | 1. CSD WR06050 README file on Disk number 1
- | 2. Novell NetWare Version 3.11 Installation Manual
- | 3. Novell NetWare for SAA 1.3 Rev.B Administration Guide
- | 4. II07093
- |
- | IBM OS2 EE 1.3 (CSD 5050+) or Version 2.X base code,
- | Communication Manager 2, LAPS from either ES (previously
- | installed), NTS/2, or Lan Services (Version 2 or 3) and
- | Novell NetWare Version 3.1X are required.
- | Novell NetWare NWSAA Version 1.3.30C or above must be
- | installed on the NetWare file server. Communications
- | Manager/2 ServicePack MUST be installed. (CSD LEVEL AT
- | WR06050)
- |
- |2. 06/29/93 INSTALLING OVERVIEW FOR THE OS2 WORKSTATION
- | NOT SNA GATEWAY OR LAN NETWORK MANAGER
- |
- | A. The OS2 Workstation can be UPSTREAM (has the host
- | connection) or DOWNSTREAM. It can be the SNA Gateway
- | or have LAN Network Manager installed.
- |
- |3. 06/29/93 INSTALLING OVERVIEW FOR THE OS2 WORKSTATION
- | NOT SNA GATEWAY OR LAN NETWORK MANAGER
- |
- | A. The OS2 Workstation can be UPSTREAM (has the host
- | connection) or DOWNSTREAM. It can be the SNA Gateway
- | or have LAN Network Manager installed.
- |
- | B. Refer to Information APAR II07093 for assistance
- | installing the OS2 Workstation. A successful
- | install of the workstation will give a positive
- | response to "L:" entered from the command line.
- |
- | C. FFST/2 (First Failure Support Technology) must be
- | running in the OS2 workstation. FFST/2 packages the
- | alert in a format understood by Netview.
- |
- | D. OS2 Service Point Application Router (RTR) and OS2
- | Remote Operation Service (ROP) must be started if Run
- | Commands (RUNCMD) are to be sent from Netview to the
- | workstation. Start the Router first and wait for the
- | response. They can be started by the ICON or by
- | issuing "START RTR" or "START ROP" from the command
- | line.
- |
- |4. 06/29/93 INSTALLING OVERVIEW FOR THE NETWARE SERVER
- |
- | A. Install NetWare Version 3.1X Server code per Novell's
- | NetWare Installation. Install a NetWare workstation
- | (can be DOS or OS2 for this purpose). Login with this
- | workstation as Supervisor to install NWSAA. The
- | NetWare for SAA Administration Guide will provide the
- | needed information for this install.
- |
- | B. If the NetWare Server is UPSTREAM (has host connection)
- | a "Profile" will need to be defined.
- |
- | C. The COMMEXEC will need to be loaded ("LOAD COMMEXEC")
- | on the NetWare File Server. If the Server is UPSTREAM
- | the Profile will need to be loaded ("LOAD XXXXXXX").
- |
- +-------------------------------------------------------------+
- |KEYWORDS: CMINFO 566933602 R130 562125400 R100 CM 0964137 |
- |NWSAA Rev.B CM2INFO |
- | |
- | |
- | |
- +-------------------------------------------------------------+
-