home *** CD-ROM | disk | FTP | other *** search
-
- PRINT SELECTION FOR APAR - II06579 93/04/27
- PIN INFO-PC-LIB-104 II06579-MS-MESSAGE
- F - - -
- CM PROBLEMS IN THE AREA OF LAN PROTOCOL AND ADAPTER SUPPORT OR
- LAN TRANSPORT ( LAPS )
- END OF ABSTRACT FESN5NFO000-000
- REPORTED RELEASE R001
- ERROR DESCRIPTION:
-
- +-------------------------------------------------------------+
- |II06579 |
- | Communications Manager Information APAR |
- | |
- | ES/1 |
- | |
- | CM problems in the area of Lan Protocol and |
- | Adapter support or Lan Transport ( LAPS ) |
- | |
- | |
- |LAST UPDATE: 02/03/93 BY: GMB |
- | |
- |Purpose: This information APAR provides information on |
- | CM problems in the area of Lan Protocol and |
- | Adapter Support or Lan Transport |
- | |
- +-------------------------------------------------------------+
- |
- | Overview.
- |
- | 1. Frequent problems
- | 2. Duplicate address test at initialization
- | 3. References
- |
- |
- +-------------------------------------------------------------+
- | 1. Frequent problems
- +-------------------------------------------------------------+
- |
- |12/08/92
- |Problem: - Communications Manager will not load
- | Token-Ring driver
- | - Message: ACS0111 (CM message: Main CM Menu)
- | LT00050 (Lan Transport: in LANTRAN.LOG)
- | - Error: Type 0017 00000002 ALERT 3EF789B7
- | - Duplicate address appears to be returned by the
- | network, although there is not a duplicate address.
- | this is caused by a device (S/W or H/W)
- | probably echoing back the address.
- | - A duplicate address is present on the ring.
- |
- |Solution: Resolve the duplicate address.
- |
- |Suggestions:
- | 1. Change the T/R address to insure it is unique.
- | 2. Find the duplicate address:
- | -ask the IBM Account Team to use OS2PING from the
- | IBM tools disks or
- | -use a LAN manager program to query the adapter
- | address or
- | -use a sniffer trace
- | 3. Try adding "NETFLAGS = 0x0100" after the link
- | statement in the PROTOCOL.INI file. The NETFLAGS
- | parameter is a circumvention until the S/W or H/W
- | that is incorrectly echoing or incorrectly
- | sending a duplicate address can be identified
- | and corrected. After the S/W or H/W (bridge,
- | router, etc.) is found and corrected, then
- | the parameter should be removed to allow Lan
- | Transport to continue checking for the error of
- | a duplicate address.
- |
- |01/29/93
- |Problem: - Communications Manager gets TRAP 000D Indicating
- | the PROTMAN$ driver as originator
- | - Message: TRAP 000D ORIGINATOR: PROTMAN$
- |
- | - If the TOKEN entry found under the MAC SECTION
- | DEFINITION of the PROTOCOL.INI file is BLANK or
- | contains a NULL a TRAP 000D will occur.
- | (EVEN IF THE TOKEN ENTRY IS NOT BEING USED)
- |SOLUTION:
- | 1. Add a value on the line below the TOKEN entry
- | found under the MAC SECTION DEFINITION.
- | EG.
- |
- |----------------- MAC SECTION -------------------------------*
- |-------------------------------------------------------------*
- |
- | TOKEN
- | TOKEN$
- |
- +-------------------------------------------------------------+
- | 2. Duplicate address test at initialization
- +-------------------------------------------------------------+
- |12/17/92
- |
- | There are 3 XID frames sent out at initialization time
- | requesting a response by any adapter having the same
- | address as the local adapter. If another adapter has this
- | address as well, it will respond by sending its own XID frame.
- |
- | This test for LANDD.OS2 (CM ES 1.0 LAPS) will cross
- | all bridges in the network, unlike LANDD.SYS (CM EE 1.3)
- | which tests only locally.
- |
- | There is a wait period of 1.5 seconds for the
- | responses to arrive. After this time, if more than
- | the original 3 XID frames for this address have been
- | received, then the assumption is made that a
- | duplicate address has been detected. In some cases,
- | a bridge in diagnostic mode, or one not functioning
- | properly will echo these XID frames back to the
- | network causing extra frames to arrive at the
- | initializing adapter, and a false indication of a duplicate
- | address will occur.
- |
- | NETBIOS does not have a similar test, which can cause
- | failures later if a duplicate address exists on the network.
- |
- +-------------------------------------------------------------+
- | 3. REFERENCES
- +-------------------------------------------------------------+
- | 12/17/92
- | Extended Services for OS/2 CM Tuning Guide for LAN Adapter
- | and Protocol Support (LAPS) Feature GG66-3243
- |
- +-------------------------------------------------------------+
- | |
- |KEYWORDS: CMINFO 562121301 R100 CM |
- | LT00050 LAPS TRAP000D TRAP 000D DUPLICATE ADDRESS |
- | ACS0111 |
- | |
- | |
- +-------------------------------------------------------------+
-
- COMMENTS:
- SEE ERROR DESCRIPTION FOR INFORMATION
- CIRCUMVENTION:
- REPINNED 93/02/08 RALFS/ATD
- 93/02/08,UNKNOWN
-
-