![]() | ![]() |
|
![]() |
|
Locate the latest device driver assembly for your operating system and copy to it to a location available to the host PC.
Install the RocketPort Universal PCI adapter in the host system.
Attach the Octacable or interface box (panel or rackmount ).
Quad/Octacable Interfaces
Make sure that the connectors are properly aligned and forcefully push the connector of the Quad/Octacable with a rocking motion into the card connector. Make sure that the connector is seated tightly before tightening the retaining screws on the connector.
Panel and Rackmount Interface Boxes
Make sure that the connectors are properly aligned. Do NOT use force when connecting the cables to the host adapter card.
Install the device driver for your operating system.
You can refer to the driver installation document for the Linux® or Microsoft® drivers. Drivers for other operating systems contain readme files in the driver assembly that provide installation and configuration procedures.
![]() |
|
Connect the serial devices to the RocketPort Universal PCI ports.
Pin | RS-232 | RS-422* |
---|---|---|
1 | DCD | Not used |
2 | RxD | RxD- |
3 | TxD | TxD+ |
4 | DTR | Not Used |
5 | Gnd | Not Used** |
6 | DSR | Not Used |
7 | RTS | TxD+ |
8 | CTS | RxD+ |
9 | RI | Not used |
![]() |
|
For installation problems, there may be applications available to test the driver or you can run the diagnostic.
![]() |
![]() | 06/11/14 | Home | Comtrol Support | ![]() | |
![]() | Copyright © 2014 Comtrol Corporation. | ![]() |