October 11-15, 1993 at the Bill Graham Civic Auditorium, San Francisco.
For more information about Autodesk University, call 415-905-2354, or fax 415-905-2220.
Tuesday, October 12
CAD 011 Printing & Plotting
Jessica Freiberg and Christal Moreno
Plotting is where all CAD work comes to fruition. This class emphasizes AutoCAD Release 12's powerful new plotting features. You'll learn the best techniques for plotting on the DOS 386, Windows, and Macintosh platforms. The class is repeated in CAD 112, 8:30-10:00 on Thursday.
CAD 012 AutoCAD Systems Management
Michael Berman
Learn not only how to maintain your AutoCAD system, but also how to manage the CAD workstations for your workgroup or department. Topics to be covered include networks, standards, and data management. This was the most popular class at NAAUG ╘92, so don't miss it this year! The class is repeated in CAD 062, 8:30-10:00 am, Wednesday.
CAD 013 Understanding Paper Space
Richard Weiss
AutoCAD allows you to work on drawings in both Model Space and Paper Space. Most of the design and drafting work on 2D and 3D models is done in Model Space, while the drawing sheet layout is done in Paper Space, allowing WYSIWYG plotted at a 1:1 plot scale. This hands-on session teaches how Paper Space lets you create viewports that can be arranged, scaled, and annotated on a full-size drawing sheet, with each viewport showing a different part of the model or displaying it from a different viewpoint.
ACT 021 The Autodesk Unique Application Reseller Program: Opportunities for Niche Developers
Hazel Wood
Attention developers: Learn about how Autodesk's UAR Program, designed to focus on developers and companies who offer highly specialized solutions and/or opportunities beyond the traditional CAD market. You'll learn how Autodesk products can be provided within a bundled solution and used outside the CAD arena, the requirements of the program, and how to focus on niche markets and opportunities.
AEC 021 Overview of AEC CAD for Managers
Craig Sharp
A short, non-jargonized course to help you understand what you can expect from an AutoCAD system in your office. You'll learn methods for the economical and quick review of CAD work so that you can keep up with the everyday progress of the work even if you don't use AutoCAD. You'll also learn how to organize workflow to take advantage of AutoCAD's capabilities. The course also discusses ways that you can improve your own computer literacy.
AEC 022 CAD Management Using AutoCAD Part 1: Standards and Projects
Mark Middlebrook
Why standardize? How can standards be realistically implemented and enforced? This class discusses taking advantage of AutoCAD by building standards into your workflow, with the goal of making standards enforcement not only easier, but automatic. You'll learn how to work towards this goal and which software tools are available to help. The class also teaches how to manage AutoCAD standards for projects, including those with special requirements, with an emphasis on planning, project setup, and enforcement. The class is repeated in AEC 031, 1:30-3:00 on Tuesday.
AEC 023 Introduction
to AEC Drafting with AutoCAD
Ted Boardman
This session uses AutoCAD to demonstrate the fundamentals of CAD in an AEC setting, showing simple customizing enhancements for streamlining AutoCAD. This class features demonstrations of add-in packages from Autodesk's strategic developers. A discussion follows on the importance of enveloping standards and the role of proper training so that operators and managers can utilize AutoCAD's full potential.
CAD 021 File Interchange: Working with DWG, DXF, and IGES
Ralph Grabowski
No two CAD packages use the same file format to store design files. To exchange drawings between different CAD packages, the design file must be translated. Among host-based CAD systems, IGES (initial graphics exchange specification) is the neutral exchange format of choice, while DXF (drawing interchange format) is preferred among desktop CAD systems. But fast becoming the new exchange standard is AutoCAD's own DWG format. This session de-scribes the pros and cons of these different formats, and offers workarounds for the problems imposed by drawing translation.
CAD 022 Introduction to AutoLISP
Lynn Allen
AutoLISP has long been the programming language used to enhance the productivity of AutoCAD. This simple and flexible language can be used to tailor AutoCAD for your specific application. With even a basic knowledge of AutoLISP, you can create simple macros and functions to improve the performance of AutoCAD. This introductory class for non-programmers establishes a good foundation of AutoLISP knowledge and starts you on the road to writing your own programs. The class is repeated in CAD 032, 1:30-3:00 on Tuesday.
CAD 023 How to Use Programmable Dialog Boxes (DCL)
Brad Zehring
This course teaches intermediate AutoCAD users the fundamentals of designing, posting, and managing dialogue boxes in Release 12. The class covers the syntax and structure of the dialogue control language. You'll leave with handouts for all the examples used in the session, as well as the Autodesk Training Depart-ment curriculum for its three-day course in programmable dialogues. The class is repeated in CAD 131, 1:30-3:00 on Thursday.
CAD 024 Introduction to Generic CADD, Part 1: True CADD
Dave Nurney
Potential and beginning-level users will learn the difference between true CADD software and ordinary draw or paint programs, and the advantages of CADD over manual drafting methods. The class then provides an overview of Generic CADD's capabilities and procedures, including basic CADD terms and concepts, command and data entry, coordinate systems, drawing with Generic CADD, viewing the drawing, layers, snaps and trims, editing, adding text, use of components, dimensioning, importing and exporting files, and plotting and printing.
CAD 025 Developing a CAD Standard
Marc Hanson
This session covers the nuts-and-bolts development and implementation of CAD standards in your organization. The discussion includes the purpose of standards, aesthetics, style, accuracy, layering, lettering, linetypes, file naming, drawing sizes, plotting, scaling, revision control, and the use of sophisticated AutoCAD features such as Paper Space. We'll consider the impact of potential hardware and software configurations, international locations, multiple disciplines, and future uses for the CAD data, as well as the quality is-sues associated with documentation of standards. The class is repeated in CAD 036, 1:30-3:00.
CAD 026 Platform Bench-marks -- Read' Em and Weep
Greg Robinson
How fast is fast? This class explores the various industry benchmarking tests for AutoCAD, video graphics and hardware. You'll learn the pitfalls of benchmarking, and review both the strong and weak points of many benchmarks. You're receive not only course handouts outlining benchmarking results for today's hottest CAD hardware platforms, but also a complimentary copy of the Delucchi Benchmark Version 2.0.
CAD 027 Networking AutoCAD with a PC-based Network
Vincent Everts
This intermediate-level course in PC networking examines the elements and choice in PC networks. You'll learn how to estimate costs, calculate return on investment, and design an implementation strategy. The course covers installing AutoCAD on a network, running Windows effectively, and sharing peripherals and data. Special topics include the server strategy vs. local stations; how networking affects your company's organization and work flow; and the future of networking, including NetWare 4.0 and Windows NT. You'll benefit most from this class if you already have a basic understanding of the functions of a local-area network.
MCH 021 Overview of Mechanical CAD for Managers and Executives
Mike Tanner
This class presents an overview of mechanical CAD for managers. You'll learn about issues of interest such as implementing mechanical CAD in your organization, integrating design and manufacturing, and the kinds of programs and procedures needed to make your mechanical CAD installation a success. This class repeats on Thursday.
MCH 022 Working with ManufacturingExpert
Jeff Hock
This session focuses on the process used to create a numerically controlled cutter path in order to automate the machining process using ManufacturingExpert. You should have a clear understanding of AutoCAD and 3D design for mechanical applications. The class is repeated in MCH 042, 3:30-5:00 on Tuesday.
MCH 023 Creating 2D Drawings from 3D Data
Michelle Pillers
This session shows you, the power user, how to bring AME's 3D modeling drawings into a 2D format that can be used by any AutoCAD user, be it client, vendor, or co-worker. You'll explore the appropriate use of SOLVIEW, SOLDRAW, 3D point filtering, layering, and Paper Space viewports. This session is for the high-end AutoCAD users. Familiarity with AME is necessary. The class is repeated in MCH 093, 3:30-5:00 on Wednesday.
MM 021 Designing in 3D Using AutoCAD and 3D Studio
Steven Elliott
3D Studio contains a very powerful surface modeler capable of many feats beyond the scope of AutoCAD. AutoCAD, on the other hand, has control and precision that allow modeling techniques that would be impossible to achieve in 3D Studio. You'll learn how AutoCAD entities translate into 3D Studio objects; how the characteristics of each entity type impact decisions concerning model detail, layer organization, and smoothing groups; effective use of the Region modeler and AME; how to maintain the relationship between DWG and 3DS files; and more. To maximize your benefits from this class, you should have some experience with AutoCAD and 3D Studio. The class is repeated in MM 042, 3:30-5:00 on Tuesday.
MM 022 Creating Excellent Animation with AnimatorPro and AutoCAD
Randy Randall
This course focuses on computer graphics as an information language; the choice of 2D, 2 1/2 D or 3D; pre-production planning; art direction and "style"; the details of production such as storyboards and effect tracks; and final display considerations. The session examines the capabilities and limitations of animation products, their appropriateness for certain situations and the techniques required for animation production. Although this course covers attributes of AutoCAD and AnimatorPro, this is not a step-by-step class in their use. The class is repeated in MM 033, 1:30-3:00 on Tuesday.
TAC 021 Instructor Development for AutoCAD Release 12, Level 1
Phil Dollan
This workshop tackles the problem of curriculum development for an introductory course for AutoCAD Release 12 for Windows. The discussion includes the delivery of the requisite knowledge and skills for such a course, and suggestions on how you, as an instructor, can develop or improve your abilities as an educator.
AEC 031 CAD Management Using AutoCAD Part 1: Standards and Projects
Mark Middlebrook
A repeat of AEC 022, 10:30-12:00 on Tuesday.
AEC 032 Using Generic CADD for Facilities Management
Jim Larson
The design of a corporate environment is usually not the task of one person. It has become a process which starts in the front office and works its way down through the organization. What is the role of computer-aided design and drafting in the corporate environment? Is it merely the creation of drawings that show the existing walls of a facility, or is it more?
AEC 033 Intermediate AEC Design Applications with AutoCAD
Ted Boardman
This session explores the uses of AutoCAD, third party or strategic developer AEC software and 3D Studio to extend the capability of an AEC office. You'll examine strategic software which provide seamless enhancements and added functionality using HVAC, Plumbing, and Electrical modules. The class also shows how to use 3D Studio to produce a professional-quality animated site and a rendered architectural model.
CAD 031 Using the AutoCAD Visualization Extension (R12 Rendering)
Larry Knott
This course discusses how to use AutoCAD Release 12's built-in rendering capabilities in the AVE module. You'll learn about proper model design, rendering, and hardcopy output.
CAD 032 Introduction to AutoLISP
Lynn Allen
A repeat of CAD 022, 10:30-12:00 on Tuesday.
CAD 033 Intermediate AutoLISP
David Pitzer
If you have a working acquaintance with AutoLISP and wish to expand your programming knowledge, you'll benefit from this class. You'll learn new methods of writing, testing, and debugging practical programs, with a focus on improving present skills and learning methods to increase the speed, efficiency, and "friendliness" of user-defined functions. The class is repeated in CAD 071, 10:30-12:00 on Wednesday.
CAD 034 Moving to 3D Design with Generic 3D Drafting
Ray Freeman
For anyone involved in the design of three-dimensional objects, from industrial products to buildings, working in 3D has tremendous benefits. This course focuses on using 3D in the design process. You'll learn how to use Generic 3D's database as a simulation of reality, leading to an exploration of the purposes and uses of 3D modeling in design. Beginning with basic drawing techniques and similarities to 2D, this course deals with new uses of layers and groups for design purposes, specific techniques for developing design alternatives, and links to Generic CADD and other software.
CAD 035 Introduction to Generic CADD, Part 2: Productivity
Dave Nurney
Ready to use Generic CADD faster and more efficiently? If you're a beginning Generic CADD user, or have attended class CAD 024, this class will teach you great power features. You'll learn about more advanced but easy to use data entry techniques such as manual coordinate entry modes, direct distance entry, use of mathematical expressions, snaps, tracking, ortho angle, and cursor free. The course discusses Generic CADD's famous 2-letter commands, including nesting commands within other commands. You'll also review other Generic CADD productivity features, such as advanced editing selection tools, named layers, importing text, showing by example, customizing menus and function keys, component attributes, and more.
CAD 036 Developing a CAD Standard
Marc Hanson
A repeat of CAD 025, 10:30-12:00 on Tuesday.
GIS 031 AutoCAD and GIS: Overview for Managers
Roy Chursinoff
In this session, you'll hear a management-level overview of GIS which highlights the differences between CAD, automated mapping, and GIS applications using actual examples. We'll develop an understanding of GIS by describing and giving working examples of its major components: data capture, attribute management, spatial manipulation, analysis, and output. The class also discusses management topics such as data issues, critical success factors, costs and benefits, senior management commitment, implementation, and training.
MCH 031 Using XREFs and Paper Space in Mechanical Design
Michelle Pillers
Paper Space is a powerful AutoCAD concept used to create presentation-quality 2D drawings from 3D models. This session teaches effective techniques for using Paper Space and Model Space layering conventions, viewports, dimensioning, UCS, point filtering, zooming, and transferring entities from one space to another. You'll learn how to move from one space to another effortlessly, and make effective use of AutoCAD's most misunderstood facility. The class is repeated in MCH 074, 10:30-12:00 on Wednesday.
MCH 032 Using Attributes, Extended Entities, and Databases in Mechanical
LeAnne Thurmond
This class for the intermediate or advanced AutoCAD user shows how to add intelligence to your AutoCAD drawings. One method is to attach attribute information to block insertions. Another technique is to use extended entity data to attach additional information to any AutoCAD entity. Or, you can use ASE to provide direct communication to external databases. This class examines the benefits of each method of adding intelligence for specific applications. The class is repeated in MCH 122, 10:30-12:00, Thursday.
MCH 033 Introduction to Mechanical Drafting Using AutoCAD
J.C. Malitzke
This session covers the use of AutoCAD in the mechanical drafting field, presenting real-world examples that confront mechanical drafters with the basic concepts, commands, and features of AutoCAD necessary to create a drawing. If you're looking for a greater understanding of the uses of AutoCAD in increasing your mechanical productivity, this class is for you; you'll learn about drawing setup, entity creation and manipulation, editing techniques, display commands, coordinate systems, symbol libraries, drawing file manipulation, and storage and plotting. The class is repeated in MCH 123, 10:30-12:00 on Thursday.
MCH 034 Using AutoCAD with Rapid-Prototyping Machines
Terry Wohlers
Users of rapid prototyping (RP) systems have saved impressive amounts of money and time while enhancing the design and manufacture process. You'll see how organizations use RP systems for conceptualizing, modeling, design review, and fit and function testing, even showing RP parts to potential customers or sending them with requests for bids to suppliers. If you use AME 2.1, you can output to the STL format required by most RP systems. You'll learn AME modeling techniques and data preparation requirements and RP system costs and applications, compare RP technologies and see how RP then fits into your company's concurrent
engineering strategy.
MM 031 Wishlist: What Multimedia Users Want
Bob Bennett
Bring your suggestions for improving Autodesk's multimedia software products including 3D Studio and Animator Pro to this session. What do you need to make your job easier? All suggestions are welcome, including your desires for new features, command enhancements, documentation changes, sample files, and packaging. Make a list and bring it to this session for direct feedback from the product managers responsible for these software products.
MM 032 Desktop VR: Hardware and Software Applications
Ben Delaney
Virtual reality (VR) is one of the hot topics in computing today and a natural adjunct to CAD and other design tools. However, the state of the art, and the tools required to implement it, are not well known. Despite the common perception that VR is expensive and difficult to work with, there are many low-cost and relatively simple ways to get started. You'll learn what it takes to put VR on a desktop computer. We'll explore questions such as: What is desktop VR good for? What are the minimum requirements for a desktop VR system? How far can it go? The class is repeated in MM 072, 10:30-12:00 on Wednesday.
MM 033 Creating Excellent Animation with AnimatorPro and AutoCAD
Randy Randall
A repeat of MM 022, 10:30-12:00 on Tuesday.
ACT 041 Autodesk's Strategy in Technical Data Management
John Stetak
This session by the product manager of Autodesk's Technical Data Management Division reveals the company's plans for a unified data infrastructure common to Autosketch, Generic CADD, AutoCAD, and other design-automation products.
AEC 041 Cost Estimating with AutoCAD
Michael Dakan
Being able to generate accurate cost estimates directly from architectural CAD drawings has a lot of appeal for design professionals as well as AutoCAD third-party developers. This session looks at software for construction cost estimating, and the AutoCAD methodologies available for linking cost database information to CAD drawings. The accuracy of the estimates produced directly from CAD information, while potentially very high, is entirely dependent on the reliability of the construction cost database information used; this is the most crucial element of the equation. The class also looks at construction-cost catalogs available for use with AutoCAD and other software programs, and their maintenance.
AEC 042 CAD Management Using AutoCAD Part 2: Customization and Training
Mark Middlebrook
This class lays out a reasonable route by which the harried CAD manager can make better progress on customization and training. You'll learn a task-oriented approach to narrow AutoCAD's many customization options to something realistic and effective. Several examples of customization needs faced by CAD managers show the approach in action. Training presents a different set of challenges, so the course offers ideas for developing a workable training method that brings your drafters along with each software advance. The class is repeated in AEC 141, 3:30-5:00 on Thursday.
CAD 041 Display-List Processing
Ralph Grabowski
The most cost-effective way to speed up AutoCAD for 386 DOS is to replace the display driver with a display-list processing driver, which lets AutoCAD redraw, zoom, and pan five to 50 times faster than before. This course examines third-party display-list drivers. You'll learn about the basic issues, like memory consumption and altered user interfaces; we'll also examine add-value items like iconic menus, drawing viewers, and bird's-eye views. And we'll look at the pros and cons of display-list processing instead of a regular display driver, with a focus on optimizing AutoCAD for the needs of your design office.
CAD 042 Introduction to 3D Modeling with AME
Michelle Pillers
Welcome to the third dimension! This session focuses on introducing you, a 2D AutoCAD user, to the world of 3D modeling. This course teaches you how to use AME to create 3D primitives, extrusions, and surfaces of revolution, and then combine them into complex, useful objects in as few as two commands. We'll discuss solid editing, how to make 2D representations of the models for part drawings, and some of AutoCAD's rendering and shading capabilities. This class also explores pitfalls and limitations of AME, and presents useful work-arounds. You'll leave this class with not only an appreciation for using solids modeling, but with the skill to begin producing your own complex 3D models.
CAD 043 Customizing AutoCAD Release 12
Lynn Allen
Even if you're a beginning AutoCAD user, and have never worked with AutoLISP or other customizing tools, this class is for you! AutoCAD Release 12 incorporated several new customizable features which don't require programming. You'll learn how to create the new cascading menus and cursor menus under the DOS platform; the course also covers the toolbar, toolbox icons, and and other customization techniques for AutoCAD Release 12 for Windows.
CAD 044 Programming R12 for Windows
Using Visual Basic
Rick Barrientos
This class gives an overview of how to use Visual Basic to customize AutoCAD Release 12 for Windows. The power of Visual Basic combined with AutoCAD provides what many people feel is the most powerful AutoCAD development environment ever.
CAD 045 Tips, Tricks, andTechniques for the Generic CADD User
Brian Smith
This session presents tips, tricks, and techniques to help you use Generic CADD to its full potential. Each lesson explores a different area, from using commands and macros to dimensioning and printing. The session provides a close-up look at the more powerful features of Generic CADD and how they can be implemented. Topics include: how macros can speed up your work; using snaps effectively; using the Bill-of-Materials; different types of hatch and fill placements; manual entry of coordinates and distances vs. using the mouse; using the Like= command; powerful editing with Selection Filters; dimensioning styles and conventions; using a digitizer and overlays; the power of viewports; and printing and scale.
CAD 046 Computer-Aided Project Management with AutoCAD
Ken Alton
Come to this session to learn how computer solutions can improve project document management. The emphasis is on areas in which the industry needs training, on product software features that are needed, and ways in which industry awareness of automated project management can be raised.
GIS 041 Using AutoCAD for Land Use Planning and Management
James Pollock and Paul Smith
This session focuses on the tools available to land planners in the analysis, design, and presentation of their land use ideas. You'll see how AutoCAD and third-party applications offer a wealth of solutions for communicating ideas with maps and graphics through case studies featuring a 17,000-acre new community being planned on the East Coast. Other topics include presentation and visualization techniques, production management, image processing, and more.
GIS 042 Highway Design
Instructor to be announced
This course covers the design of roads and highways using AutoCAD and associated third-party products. Topics include surveying, cut and fill, and other aspects of road design.
MCH 041 3D Design and Wireframe Modeling in AutoCAD
John Wilson
This class teaches you how to create 3D models using AutoCAD and Paper Space. Topics include the differences between wire-frame, surface, and solid modeling; AutoCAD's coordinate systems; viewpoints and viewports; how 2D techniques work to make 3D wireframe models; adding surfaces to the 3D model; and transferring the 3D model to paper.
MCH 042 Working with ManufacturingExpert
Jeff Hock
A repeat of MCH 022, 10:30-12:00 on Tuesday.
MCH 043 Intermediate Mechanical Drafting Applications Using AutoCAD
J.C. Malitzke
This session concentrates on intermediate AutoCAD concepts and commands. Learn how to increase productivity by implementing intermediate drawing tools and techniques using 2D and 3D features in the mechanical drawing field. Topics include 3D solids to 2D working drawings using SOLVIEW and SOLDRAW, drawing setup and usage in Paper Space and Model Space with external references, dimensioning techniques, entity enhancements with grips, and plotting techniques.
MM 041 Designing Virtual Worlds Using 3D Studio
Charles Newcombe
Virtual reality requires a delicate balance of environmental realism against an ultimate frames-per-second. 3D Studio, with its rich collection of intuitive modeling and animation tools, is an ideal application for the design and implementation of virtual spaces. This course discusses strategies for dealing with such issues as polygonal complexity, textural vs. shading techniques, animated vs. static objects, lighting technique, virtual personae, platform considerations, and making use of the new features of Release 3. The class is repeated in MM 134, 1:30-3:00 on Thursday.
MM 042 Designing in 3D Using AutoCAD and 3D Studio
Steven Elliott
A repeat of MM 021, 10:30-12:00 on Tuesday.
TAC 041 Getting Prepped for Certification
Alan Kalameja
This class presents an overview of AutoCAD Certification, and the techniques needed to pass the examination. AutoCAD Certification is designed as a first-level examination and is intended for the operator who has completed 48 hours of intensive instruction in AutoCAD and used AutoCAD regularly for several months. The AutoCAD Certification is also suitable for the new graduate of a for-credit CAD drafting program such as those typically found in community colleges and technical schools. The class is repeated in TAC 071, 10:30-12:00 on Wednesday.
PAN 051 Is Virtual Reality Worth Doing Today?
With the introduction of the Cyberspace Developer's Kit, Autodesk has become a major force in the virtual reality community. In this panel, fans and skeptics debate the value of this technology for today's AutoCAD and 3D Studio users.
PAN 052 Pick a Platform: DOS, Macintosh, UNIX?
AutoCAD runs on a variety of hardware and operating systems, including DOS, Windows, Macintosh, and several varieties of UNIX. Representatives of major hardware manufacturers discuss the merits of their own systems for AutoCAD users.
PAN 053 How to Write AutoCAD Books
Have you ever thought about writing a book? Come to this panel, in which popular authors and book publishers get together to discuss the process of writing books for the AutoCAD market. The panelists will cover developing a concept, finding a publisher, and marketing books.
Wednesday, October 13
CAD 061 How to Install AutoCAD Under All Conditions
Heidi Hewett and Joe Sarcona
This session covers the installation and configuration process of AutoCAD Release 12 on the DOS, Windows, and Macintosh platforms. Issues include hardware requirements, memory management, and peripheral configuration. We'll discuss benefits of running AutoCAD on a network versus on stand-alone systems and will examine common errors and proven trouble-shooting techniques. The class is repeated in CAD 113, 8:30-10:00 on Thursday.
CAD 062 AutoCAD Systems Management
Michael Berman
A repeat of CAD 012, 8:30-10:00 on Tuesday.
SCI 061 Introduction to Molecular Modeling with HyperChem
Bill Glauser
After a basic introduction to the HyperChem graphical user interface, this class navigates the following four areas: building and visualization; biomolecular visualization; spectroscopic prediction; and interfacing with other applications. You'll also learn about new features present in HyperChem Release 3.
ACT 071 Autodesk's Strategy in Multimedia, Animation, and VR
Jack Strange
This session by the director of marketing for Autodesk's Multimedia Division points out the company's direction for high-end graphical software, including 3D Studio and the Cyberspace Development Kit.
ACT 072 How to Become an Autodesk Developer
Neele Johnston
More than 1500 software developers worldwide have created nearly 4000 add-on programs for Autodesk's AutoCAD software, making the Autodesk Registered Developer program premier in the CAD industry. This session details the advantages of a partnership with Autodesk and the benefits Autodesk provides to Autodesk Registered Developers. Topics include the size and demographics of the developer community, how Autodesk classifies a developer, how to qualify, and how to apply.
AEC 071 Plant Design with AutoCAD, Part 1: State of the Art
Tom Scherz
This session examines the non-platform specific characteristics of plant design from the perspective of an engineering, design, and construction user. We'll explore the current state of commer- cial applications in the context of historical developments and future expectations, and work through specific examples of features and benefits inherent to plant design.
AEC 072 Using Generic CADD for Home Improvements and Landscaping
Jim Larson
Many people dream of designing their own home or garden. Now, with mini-CADD products such as the Autodesk Home Series, deck additions, fire escape routes, communicating ideas to professional architects -- all become much easier to manage using software. This introductory class follows the whole home-design process, from deciding which household projects and tasks can benefit from CADD through selecting and using the right software package.
AEC 073 AutoCAD in the Structural Engineering Office
Mark Middlebrook
How can AutoCAD best be used in the structural engineering office, both now and in the future? This class addresses current CAD practices in structural firms and uses case studies to cover the transition from manual drawing to CADD. The course also presents an assessment of the growing number of applications bringing structural analysis and design activities under the wing of AutoCAD. You'll learn what do these applications do, how useful they are, and what they foretell about the future of computer aided design in structural offices.
CAD 071 Intermediate AutoLISP
David Pitzer
A repeat of CAD 033, 1:30-3:00 on Tuesday.
CAD 073 Intro to AutoSketch for Windows
Art Voss
This course presents an overview of AutoSketch and its use as a precision drawing tool, highlighting the Windows interface. You'll learn how to use AutoSketch for conceptual design, taking advantage of features like customizable toolboxes, SmartCursor, the Aerial view, and AutoSketch macros.
CAD 074 Moving to Digital: How to Cope With Old Drawings
Marc Hanson
In this session, you'll learn how to develop and implement a plan to handle paper drawings in a CAD environment. The session considers electronic management of paper documents, microfilm, imaging, conversion of paper to CAD files and combinations of the above options. Topics include barcode tracking, database applications, automatic raster to vector conversion, CAD overlay conversion, manual redrafting, and the use of service bureaus.
GIS 071 Spatial Modeling for Property, Environmental, and Resource Management
Will Crichton
Spatial data organized in a topological structure can be used to perform a variety of analyses. The intersection of separate overlays, consisting of common spatial factors, generates an analytical model or composite overlay which can be used to gain a broad perspective of a situation encompassing both spatial relationships and statistical data. You'll learn how to create spatial overlays using standard AutoCAD drafting techniques, processing primitive AutoCAD entities to form a single intelligent overlay representing factors as diverse as parcel lots, soil types, wetland areas, or species habitat.
GIS 072 Emergency Response Management Using GIS and AutoCAD
Roy Chursinoff
GIS is an ideal tool for emergency response management because it can graphically identify the shortest or fastest routes between two or more points. The session illustrates the GIS and database requirements for an emergency response application using actual application examples. Other examples explain the various types of problems that can be solved with a transportation-based GIS such as emergency vehicle routing, address matching, and integration with new technologies such as global positioning systems
MCH 071 Designing with NURBS, Surfaces, and Curves
Scott Duncan
This class presents the surface design capabilities of AutoSurf, a powerful surface modeler which uses NURBS definitions for all of the geometry it creates. Learn about surface creation ranging from simple surfaces such as extrusions and surfaces of revolution, in addition to more advanced surface types such as trim surfaces, variable radius fillets, and automatically trimmed corner fillets. The class is repeated in MCH 094, 3:30-5:00 on Wednesday.
MCH 072 Solid Modeling with AutoCAD and AME Part 1
Thomas Short
This class explains how to use AME to create 2D regions; create solid primitives and solids by extruding and revolving; combine primitives using intersect, subtract and union techniques to optimize the combination procedure; display solids as wire frames and meshes; and display solids with the "3D" look using hide, shade, and render.
MCH 073 Techniques for FEM and FEA
Larry Bartoszek
This class describes finite element methods and the different types of analyses that are available. FEM can improve designs by giving the designer very intimate knowledge of the behavior of a part subjected to working loads. The class primarily focuses on using FEM to solve structural problems including stresses, deflection, normal modes of vibration, and optimization, showing how to use AutoCAD drawings as the basis for the finite element model. You'll learn the strengths and weakness of various third-party FEA packages, and how to pick what's best for you.
MCH 074 Using XREFs and Paper Space in Mechanical Design
Michelle Pillers
A repeat of MCH 031, 1:30-3:00 on Tuesday.
MM 071 Using Autodesk Tools in the Multimedia Environment
Ray Freeman
This course explores the use of Autodesk's 3D vector-based products in the multimedia world of images, dealing with the physical methods for getting images out of Generic 3D and Autodesk 3D Concepts into Autodesk Animator, Anima-tor Pro, and 3D Studio. You'll learn techniques for building models compatible with 3D Studio, and how to use both Autodesk and third-party products for file exchange and conversion
MM 072 Desktop VR: Hardware and Software Applications
Ben Delaney
A repeat of MM 032, 1:30-3:00 on Tuesday.
MM 073 Industrial Design with 3D Studio
Brent Blackett
This class explores visualization software -- the designer's secret weapon for keeping pace with rapid product development -- for its significant enhancement of the iterative process while minimizing turnaround time necessitated by traditional hardmodels and prototyping. The class also discusses the benefits of showing clients photorealistic proposals, including animations, that can accelerate decisions, providing the designer with up-to-the-minute feedback as well as jumpstart marketing and sales efforts -- all before the tooling die is cast.
TAC 071 Getting Prepped for Certification
Alan Kalameja
A repeat of TAC 041, 3:30-5:00 on Tuesday.
ACT 081 Autodesk's Design Automation Strategy
Len Rand
Autodesk's vice president for design automation talks about the future of AutoCAD and related products.
AEC 081 Plant Design with AutoCAD, Part II: Project Management
John McQuary
This session covers all aspects of planning and implementing plant design systems in a project environment. Topics include project systems planning, forecasts and schedules, and progress measurement. You'll learn the requirements for a service oriented support organization, and take part in an analysis of the future of plant design and the role that AutoCAD and various developers will play.
AEC 082 3D Design for AEC Using AutoCAD
Lynn Allen
AutoCAD's surface modeler is suitable for many AEC applications. This beginning 3D class lays the foundation for 3D concepts as it covers elevations and extrusions, 3DFACES, Viewpoints, DVIEW and the User Coordinate system as they relate to AEC.
CAD 081 Tips & Tricks for the Lazy AutoCAD User
Michelle Pillers
Why use CAD if it makes you work harder? The real reason for using AutoCAD is to make the computer do all the work for you so you can relax! This session provides you with a host of shortcuts and tips for making the computer do more of your work so you can go home early or take an early lunch. These aren't fancy AutoLISP routines that require lots of programming, but simple ways of working with little-known commands and facilities built into AutoCAD Release 12.
CAD 083 AutoCAD and Generic CADD in a Mixed Work Environment
Ralph Grabowski
Just how practical is a dual-CAD design office using AutoCAD and Generic CADD? AutoCAD is a full-featured networkable 3D CAD package. Generic CADD is a 2D-only CAD package that costs one-tenth as much as AutoCAD. Can the two software packages co-exist ╔ or, more important, should the two co-exist in the same office? You'll learn the advantages to outfitting some CAD workstations with the more capable AutoCAD, and others with the less costly Generic CADD, and how to integrate them into a working CAD office.
CAD 084 The ADS Develop-ment Environment for DOS
Cliff Gauntlett
This course gives an overview of developing ADS applications in the DOS environment. Topics include supported compilers and linkers, the ADS interface, and recommended methods of program design and development.
GIS 081 Using AutoCAD for Water and Wastewater Distribution
Dave Richardson
Designing a collection system for wastewater or stormwater involves the merging of geographic information like topology, land usage, and rainfall patterns with the results of hydraulic and engineering analysis. Once upon a time, it was necessary to manually include this information in construction drawings; now, with AutoCAD, you'll learn how to automatically generate construction drawings once the necessary information is available. The process involves the use of a database, simple database tools, and AutoCAD.
GIS 082 Aerial Photogrammetry Techniques for AutoCAD
Mark Safran
This introductory course teaches AutoCAD users who work with topographic and planimetric maps, 3D terrain data, or aerial photographs the basic steps for generating digital maps using aerial photogrammetry. The class discusses key elements that go into designing an aerial mapping project, as well as the many variables affecting the final cost, such as photo scale, mapping area, and desired accuracy. You'll learn about different applications that make use of digital mapping data such as geographic information systems (GIS) and 3D terrain model manipulations.
MCH 081 Solid Modeling with AutoCAD and AME, Part II: Complex Solids
Thomas Short
This class explains and demonstrates how to edit solids and change primitives; add fillets and rounds; find geometric properties including changing units and materials, accuracy, and optimization; take sections and profiles, and more. You should have some experience with AME, or have taken class MCH 072.
MCH 082 Working with DesignExpert
Jeff Hock
This session covers the needs and methods behind creating a true three-dimensional model, using both wireframing and surfacing techniques. There's a special focus on the creation and manipulation of complex free-form surfaces. The class is repeated in MCH 094, 3:30-5:00 on Wednesday.
MCH 083 Parametric Design for Mechanical Applications
LeAnne Thurmond
In many mechanical applications, a part or design will be used again and again with modifications. This class looks at ways to automate the modifications parametrically, using third-party software and programming, to increase productivity in design and drafting.
MM 081 Introduction to 3D Studio
Mark Gerhard
In this hands-on lab, you'll take a 3D model created in AutoCAD, import it into 3D Studio, and bring it to life by producing a full color animation. You learn how to design materials with photorealistic looks, place lights and cameras interactively, and discover the fun of keyframe animation. By the end of the lab you'll use the video post module to create a finished computer movie ready to play back on a VGA screen.
MM 082 3D Studio Special Effects: Expendability with IPAS
Gary Yost
IPAS is the 3D Studio interface for adding "plug-in" effects routines for image processing, procedural modeling, animated stand-ins and solid textures. 3D Studio is unique in offering these very advanced procedural effects capabilities to the PC market. This class discusses how to use IPAS to simulate natural phenomena such as rain, snow, water, smoke, explosions, foliage, and optical lens characteristics. You'll also learn how to integrate these techniques into broadcast video applications.
MM 083 Modeling with Mapped Materials and Textures
Steven Elliott
This session focuses on creating and using mapped materials for special effects. You'll explore the 3D Studio Materials Editor, seeing how multiple maps can be used within the definition of a single material, and how to mix maps, color, transparency, and shininess to create special effects and convincing materials. The class shows how to apply mapping coordinates through the lofter, apply transparent maps to nested or layered objects to achieve special effects, and use AnimatorPro and AutoCAD Release 12 to explore a process of creating precise 2D cut-outs of mapped objects for placement as entourage in 3D Studio. You'll benefit from this class if you're an intermediate to advanced 3D Studio user familiar with the Materials Editor.
MM084 Enhanced 3D Visualization with AutoCAD
Autodesk Personnel
This session will introduce you to photo realistic rendering, as well as provide you with tips and techniques so you can be productive in just minutes. You'll lean how to work in 3D and Autodesk will show you how to create top quality images with materials, light sources, shadows, texture mapping and much more. Join us for this course and discover how easy 3D visualization can be. Repeated in MM 091, 3:30-5:00 Wed.
TAC 081 Instructor Development for AutoCAD Release 12 for Windows
Milt McGrew
This workshop incorporates the power of AutoCAD Release 12 and the advantages of the Windows operating systems. The session addresses the problems of curriculum development for an introductory course for this release. We'll also discuss the delivery of the requisite knowledge and skills for such a course, and how you as an instructor can develop or improve your current abilities as an educator.
ACT 091 Autodesk's Strategy in Mechanical CAD
Ken Spenser
The general manager of Autodesk's Mechanical Division (formerly Micro Engineering Solu-tions) talks about the present and future of the company's mechanical CAD product line, including DesignExpert and Manufacturing Expert.
AEC 091 Solid Modeling Using AutoCAD & AME for AEC Applications
Dave Aguilar
This course introduces you to the Advanced Modeling Extension. You'll learn about how to improve your AEC projects with AME's basic Boolean functions (unions/subtractions/intersections), surface modeling from solids, external referencing, basic volumetrics, and "sweep" techniques. From walls and furniture to highways and digital terrain models, this tool is vital for anyone working in 3D.
AEC 092 Introduction to Facilities Management Using AutoCAD
Bryan Wallace
Many companies have turned to computer-aided facilities management and have seen their productivity and accuracy increase. In this session, you'll review some of the facilities management software packages currently available. You'll also learn how to calculate startup costs and determine the time required to switch from your current method to a computerized one. You'll leave knowing how to find the correct software for your company. The class is repeated in AEC 123, 10:30-12:00 on Thursday.
AEC 093 Using XREFs and Paper Space for AEC Applications
Craig Sharp
The combined effects of XREFs and Paper Space go well beyond "cut and paste." This class shows the benefits of XREFs and Paper Space as they pertain to all phases of the architectural practice, such as the management of documents for both in-house and consultant coordination, plotting made easy and error proof, coordination of dimensions and text with drawing scale, and a plan for the development of a dynamic, automatically updating drawing set hierarchy. The class also covers the pitfalls of the implementation of XREFs and Paper Space and the limits of their capabilities. The class is repeated in AEC 142, 3:30-5:00 on Thursday.
CAD 091 Desktop Publishing with AutoCAD
Nancy Moss
This lecture will explore the links AutoCAD has to the desktop publishing industry. Getting graphics in and out of AutoCAD in the Windows environment is covered. Topics include using PostScript fonts and adding your own fonts to AutoCAD, reading and writing PostScript files, and using PostScript fill patterns. Also covered is the rastering feature.
CAD 092 Automating AutoCAD with DIESEL
David Pitzer
AutoCAD Release 12 saw the introduction of a new macro programming language within AutoCAD. Given the memorable name of DIESEL, it provides a direct, easy-to-use means of customizing AutoCAD's screen mode status line and augmenting AutoCAD's native menu language. This session explores the 28 native DIESEL functions and explores the ways in which DIESEL can enhance both the Mode Status line (giving it sophisticated intelligence) and various menu macro applications.
CAD 093 Using AutoSketch in the Real World
Art Voss
In this session, see how one major company uses AutoSketch as the basis for creating custom architectural applications. The class discusses the advantages of using AutoSketch as a foundation for applications, highlighting specific methods employed by one home-construction firm to create an application to help clients visualize, make changes, and build their dream home. You'll learn how to develop custom options, and how to use the macro capabilities to fit your particular need.
CAD 094 PC Graphics Technology and Performance
Jake Richter
Almost daily, hardware (and software) companies announce "breakthroughs" in display performance and technology. This session discusses what's currently out there, and what can be expected to arrive in the coming year for both DOS and Windows. Topics include local bus, new graphics boards and chips, replacing bulky monitors with color flat panels, smart monitors, and system bottlenecks.
CAD 095 OSHA Requirements in Process Safety
Cindy Lancaster
This workshop covers OSHA's CFR-1910/ Process Safety Management and the effects of compliance on the industry. Topics include the problems facing owner/operating companies, an overview of the regulations, and the role of the drafting community in process safety management. The class debates PI&Ds, application customization, drafting specifications, training, and other future needs. The class is repeated in CAD 145, 3:30-5:00 on Thursday.
GIS 091 Intermediate GIS Applications with AutoCAD
Ken Flesher
This session covers applying AutoCAD in a mapping/GIS system, using ESRI's ArcCAD as the link between the graphical map and an attribute database. The course introduces GIS theory, and shows how to use AutoCAD to build and maintain maps, digitize existing maps, link a database to the AutoCAD entities (ArcCAD and ASE), and ArcCAD's spatial-analysis features.
GIS 092 Using Digital Maps for GIS and Civil Applications
Patrick Liebmann
Although there is an abundance of available digital data for GIS users, it must be converted to a format suitable for AutoCAD. Data currently available consists of Census TIGER/Line, Digital Line Graph files (DLG), ETAK Map Base data and SPOT Satellite Imagery. You'll learn the data structures of these data products, how the data is made cartographically appealing through sophisticated enhancement processing, and how Satellite Imagery is integrated into AutoCAD. The course describes how supporting databases, such as the Geographic Names Information System (GNIS) and Digital Elevation Model data (DEM), add additional value to this base information.
MCH 091 AutoCAD Productivity Tools for Mechanical Engineering
Bill Kramer and John Wilson
AutoCAD's third-party developers have created a workbench full of tools to ease the job of generating documents and models for mechanical engineering. This course provides an overview of what is available on the market today for annotation and design. The class explains fastener libraries, bill of materials, layer management, productivity commands, construction lines, ortho and iso projection tools, advanced material handling, parametrics, and more. The class is repeated in MCH 141, 3:30-5:00 on Thursday.
MCH 092 Working with DesignExpert
Jeff Hock
A repeat of MCH 082, 1:30-3:00 on Wednesday.
MCH 093 Creating 2D Drawings from 3D Data
Michelle Pillers
A repeat of MCH 023, 10:30-12:00 on Tuesday.
MCH 094 Designing with NURBs, Surfaces, and Curves
Scott Duncan
A repeat of MCH 071, 10:30-12:00 on Wed.
MM 091 Enhanced 3D Visualization with AutoCAD
Autodesk Personnel
Repeat of MM 084, 1:30-3:00 Wed.
MM 092 Hi-Res Still Frame Rendering with 3D Studio
Michael Sechman
You'll learn about four critical areas involved in producing photorealistic renderings: CAD modeling (the preparation of CAD models for rendering is different than that for traditional architectural models); photographing the background site and materials for accurate representation of the building; using compositing software to merge the computer-rendered image and the photobackground; and output, producing large format still renderings and animations to video.
MM 093 Introduction to Animator Pro
Dave Aguilar
This course gives you, the new user, an overview of the capabilities of the latest release of Animator Pro 1.3. It covers tools, ink types, palette control, creation and manipulation of cells, graphic file formats and conversion processes, animation techniques, image processing, external scripting of generated files, and 3D Studio post-production techniques.
TAC 091 Instructor Development for Multimedia
Matt Murphy
This workshop is designed for trainers and educators who wish to implement or improve the quality of instruction for using Autodesk Animator Pro and Autodesk 3D Studio. You'll learn how to plan and implement a multimedia program as an integrated part of an existing AutoCAD program and as an independent course of study. The class also covers classroom management, evaluating student work, individual and team projects, and using available instructional resources.
CAD 101 Wishlist -- What AutoCAD Users Want
Phil Kreiker
Join your fellow AutoCAD users as they discuss future enhancements to AutoCAD with a panel of Autodesk senior programmers and North American AutoCAD User Group (NAAUG) representatives. Questions and suggestions for enhancements to the product will be taken from the audience and discussed in this
interactive forum.
PAN 101 The Future of CAD
Today's CAD users are doing far more than design; they're networked, handle huge documents, tie into relational databases, and practice concurrent engineering. Our panelists use their crystal balls to predict what CAD will mean over the next decade.
PAN 102 Understanding Graphics Technologies
Autodesk's software requires sophisticated graphics capability -- and in the PC arena, new graphics hardware standards seemingly emerge daily. This panel looks at today's choices, and tomorrow's trends.
PAN 103 Where Should I Send My Plot?
Pen plotters, ink-jet plotters, die-sublimation printers, laser printers -- there's never been a larger selection of output devices for AutoCAD users. On this panel, hardware manufacturers try to show why their brand of technology is the best for you and your company.
PAN 104 Pen-Based Computing
Pen-based computing means a lot more than digitizing tablets: laptop computers use pens, there's a version of Windows for pen computers, and CAD manufacturers are talking about pen input. How will pen technology affect you? Come and find out.
Thursday, October 14
CAD 111 AutoSketch Lab
Art Voss
This hands-on session demonstrates Auto-Sketch's more advanced applications and functionality. You'll learn how to go beyond simple beginning features and explore the macros capabilities included with AutoSketch. Develop templates to automate the initial drawing settings. Become familiar with easy-to-use features that increase the power of AutoSketch. You'll benefit from this class if you have some experience with AutoSketch.
CAD 112 Printing & Plotting
Jessica Freiberg and Christal Moreno
A repeat of CAD 011, 8:30-10:00 on Tuesday.
CAD 113 How to Install AutoCAD Under All Conditions
Heidi Hewett and Joe Sarcona
A repeat of CAD 061, 8:30-10:00 on Wednesday.
ACT 121 Autodesk's Strategy in AEC CAD
Ian Matthew
This session walks you through two new Autodesk divisions, Process & Power and Facilities Design, Construction, and Management.
AEC 121 HVAC Engineering Using AutoCAD
Michael Dakan
This course investigates the application of AutoCAD to heating, ventilation, and air conditioning systems design and drafting. You'll explore both 2D construction document production and automated 3D drafting of ductwork and terminal equipment. The class examines current state-of-the-art AutoCAD application software for HVAC, as well as HVAC engineering software that provides dynamic links to the AutoCAD database for design analysis of ductwork systems.
AEC 122 Using Generic CADD for Architecture
Dave Nurney
This session starts with an overview of Generic CADD's drafting features, then focuses on architectural features like double line and multi line commands, multi trim and multi extend, editing functions, named layers (including an overview of the layer naming system recommended by the AIA), use of architectural measurement units, text, autodimensioning functions, importing and exporting drawings with other CADD packages, use of components, area calculation, crosshatching, and the use of attributes for cost estimating and facilities management.
AEC 123 Introduction to Facilities Management Using AutoCAD
Bryan Wallace
A repeat of AEC 092, 3:30-5:00 on Wednesday.
AEC 124 Implementing Architectural Standards Using AutoCAD
Craig Sharp
Wedding of firm practices and standards with the AutoCAD environment can produce a completely integrated office database which benefits all areas of your architectural practice, from marketing to total quality management. This class examines drawing, file management, and CAD practices as they relate to existing office practices. You'll explore standard drawings, office forms, linking AutoCAD drawings to brochures and presentations, development of an office CAD manual, and where to look for examples and help are also reviewed.
CAD 121 Accelerating AutoCAD Release 12 for Windows
Greg Robinson
Increase your productivity by optimizing your AutoCAD 12 for Windows performance, so that your AutoCAD and other Windows programs will run faster. Topics include the ever-confusing EXPanded, EXTended, Conventional, System, and Upper Memory, bitmapped vs. vector graphics, and the best way to write your AUTOEXEC.BAT and CONFIG.SYS files. You'll also learn how to tune your SYSTEM.INI file, and understand graphics-cards standards for improving Windows stability and performance.
CAD 122 Successful Client Presentations
Ray Freeman
Sophisticated renderings and animations are usually thought of as only possible once a design has progressed to a point where there is enough information to build a complex model. Not true! This course focuses on techniques for generating impressive and effective renderings and animations early in the design process, where they do everyone more good. We'll look at Generic CADD, Generic 3D, 3D Concepts, Chaos, Animator Pro, and 3D Studio.
CAD 123 Networking AutoCAD with UNIX
Marc Hanson
This session covers the planning and technical implementation of an AutoCAD station network with a UNIX-based server. We'll consider the simultaneous use of DOS, Windows, Macintosh, and UNIX computers as AutoCAD workstations as well as providing all workstations with terminal access to other enterprise-wide computer systems such as IBM mainframes, midrange, or VAX minicomputers. Topics include relevant industry standards, network topology and protocol, disk management, backup, long-term archival of drawings, wide-area networks, remote access, security, and how to maintain the integrity of the CAD database.
CAD 124 CheckMark
William Parker
Checkmark, Autodesk's "CAD access" product, provides access to CAD data from most CAD systems at electronic speed and reduces the need for paper-based communication. With Checkmark, users can measure distances, cut sections, and produce layouts from 3D CAD models. In this session, you'll learn about actual applications where users access 2D and 3D data electronically, thereby reducing checker time, decision cycle time, communication time, and build time.
CAD 125 Windows-ADS Development Environment
Phil Ford
This course covers the development of ADS applications in the Windows environment. Topics include supported compilers and linkers, the Windows ADS interface, and recommended methods of program design and development.
GIS 121 Implementing a Municipal Public-Works System Using AutoCAD
Carey Moore
This course offers a short introduction to GIS technology, followed by a detailed focus on the steps required to implement a municipal infrastructure management system using AutoCAD and related GIS applications. The workshop covers the development of comprehensive systems including the integration of road and pavement management data, sanitary, storm and watermain information, and maintenance tracking/management. You'll explore examples showing the methodologies employed toward the development of alternative systems, the implications of GIS data sharing, and the differences between relational database managers. This workshop also covers the basic differences among the various AutoCAD third-party GIS products.
What should a telecommunications company expect from a GIS? This presentation addresses the issues that must be considered in a telecommunications GIS, such as identifying and analyzing existing source documents, determining the accuracy requirements of the landbase, comparing and selecting hardware and software, looking realistically at conversion issues, implementing work order processing and workprint generation, understanding the importance of user training and support, and realizing the day-to-day benefits of your GIS.
GIS 123 Introduction to GIS with AutoCAD
Ken Flesher
This session covers the application of AutoCAD in a mapping/GIS system. Concepts include an introduction to GIS theory, using AutoCAD for building and maintaining maps, digitizing existing maps, and input and reduction methods. The class shows how third-party packages enhance AutoCAD's ability to handle coordinate geometry, site design, and analysis.
MCH 121 Concurrent Engineering in Mechanical CAD
Ken Alton
The goal of decreasing product time-to-market can be facilitated with concurrent engineering (CE) philosophies and procedures. This class discusses the steps that are necessary to implement CE, the equipment and training requirements, and realistic results that you might expect.
MCH 122 Using Attributes, Extended Entities, and Databases in Mechanical
LeAnne Thurmond
A repeat of MCH 032, 1:30-3:00 on Tuesday.
MCH 123 Introduction to Mechanical Drafting Using AutoCAD
J.C. Malitzke
A repeat of MCH 033, 1:30-3:00 on Tuesday.
MCH 124 Using AutoCAD for NC Programming
Bill Kramer
Autodesk and a host of third-party vendors offer a cornucopia of NC/CNC programming options for AutoCAD. This course covers just what the differences are in the various generic product philosophies and how the different approaches can be exploited in both small and large shop environments. AutoCAD to NC/CNC integration topics range from fully automated "expert systems" to very basic point-and-shoot type systems.
MM 121 Advanced Animation with 3D Studio/ Professional Animation
Tom Hopper
If you're interested in high quality computer animation recorded frame by frame to professional video recorders, this course provides an overview of video fundamentals like recording formats, animation controllers, genlock, scan rates, editing recorders, time code, servos, time base correctors, stripping, frame by frame recording vs. FLC real-time output, and combining live video with 24-bit animation. This combination allows both outputting animation and being able to digitally composite live video with 24-bit animation. Video examples show rotoscoping and field rendering. The class is repeated in MM 131, 1:30-3:00 on Thursday.
MM 122 Recording to Video with 3D Studio
Steven Elliott
Many users of 3D Studio have modest requirements for the delivery and presentation of their animations. This session looks at what you'll need to record computer animation to videotape using relatively inexpensive real-time recording equipment. The session concludes with examples of writing AnimatorPro Player script files to control flic playback during recording and a brief demonstration of assemble editing techniques on entry-level professional VTRs. Attend this session if you're a beginning to intermediate users of 3D Studio, and if you are familiar with the features of the keymaker in 3D Studio and know how to edit FCL files in AnimatorPro.
ACT 131 Autodesk's Strategy in Geographic Information Systems
Blair LaCorte
You'll learn where Autodesk is heading right from the director of the company's new Mapping, GIS, and Infrastructure Division.
ACT 132 Autodesk's Strategy in Product Development
John Lynch
The vice-president of the Autodesk's Product Development Group will explain the company's plans for core CAD technologies, and how new products will be developed in the future.
AEC 131 Advanced Uses of AutoCAD for Facilities Design & Management
Bob Callori
AutoCAD now provides the Structured Query Language as a new interface to access database management systems. This session shows how a facilities manager uses ASE to keep track of individuals who occupy rooms in a dormitory. You'll learn step-by-step procedures for making a DOS batch file with the appropriate set commands, creating the SQL database, and querying the drawing. This class highlights ASE's real benefits: enabling users to input, edit, and update data either in the drawing or directly in the external database while maintaining a single source of accurate interchangeable information.
AEC 132 Building Architectural Walkthroughs with AutoCAD and 3D Studio
Noah Kennedy
Here's a practical overview of the process of conceiving, developing, and producing animation of an architectural space using AutoCAD, Animator Pro, and 3D Studio. You'll study potential production glitches so that they can be avoided, while learning strategies for speeding rendering and enhancing final imagery. A major topic is understanding final outputs and their implications in producing the animation. Other topics include network rendering, saving time with Video Post, using service bureaus, IPAS programming, rotoscoping for added realism, and avoiding common problems with texture maps, shadow maps, turbo mode, and field rendering. This class is for beginning and intermediate users of 3D Studio.
AEC 133 Using Extended Attributes and Databases in the AEC Domain
Mark Middlebrook
What is the best way to manage non-graphical data in architectural, engineering, and construction CAD drawings? This class assesses three methods for storing and linking text and numbers with AutoCAD drawings: block attributes, extended entity data, and external databases. You'll explore tools and methods, including Release 12's ASE available for linking AutoCAD entities to external databases. You should be familiar with AutoLISP in order to follow some of the examples.
AEC 134 Implementing a CAD System into an Architectural Practice
Craig Sharp
Setting up a computer, installing AutoCAD, and learning how to use it represents less than half of the effort required to make CAD effective in most architectural firms. This class presents the other half, including a strategy for implementation that starts prior to the purchase of the CAD system, evaluation of the firm's current practices as they pertain to CAD and computers in general, expanding the use of computers for benefit on a firm-wide basis, development of an implementation plan, introduction of CAD benefits to all firm members whether they will be users or not, development of expansion and maintenance budgets and general practices required for successful use of CAD.
CAD 131 How to Use Programmable Dialog Boxes (DCL)
Brad Zehring
A repeat of CAD 023, 10:30-12:00 on Tuesday.
CAD 132 Using OLE and DDE for AutoCAD Release 12 for Windows
Ralph Grabowski
Object linking and embedding (OLE) and dynamic data exchange (DDE) are two key Windows technologies that let AutoCAD automatically exchange data with other applications. In this class, you'll learn how OLE lets you embed AutoCAD drawings as graphical objects within word processors, spreadsheets and databases, and how DDE lets you exchange DXF-like data between AutoCAD and a spreadsheet. You'll leave with practical uses for OLE and DDE to help automate your CAD design office; familiarity with Microsoft Windows is strongly recommended.
CAD 133 The CAD Spectrum: Integrating AutoSketch, Generic, and AutoCAD
Tim Leavitt and Barry Pfahl
Autodesk has three distinct design solutions geared to cover the entire CAD spectrum. In this session, you'll learn about the benefits of sharing CAD among multiple users with different needs. The class covers the differences -- and similarities -- between AutoSketch, Generic CADD, and AutoCAD. Other topics include the translation issues, and the best way to share files in both networked and non-networked environments.
CAD 134 Advanced 2D Design with Generic CADD
Ray Freeman
This class presents advanced topics in using Generic CADD throughout the development process, from conceptual and schematic planning, through development stages of design, and into the documentation process. Emphasis is on maximizing the advanced capabilities of CADD, including the use of replaceable components in drawing development and sheet assembly, use of layering standards and techniques to create drawings within drawings, and the various uses of attributes for both drawing notation and data extraction.
MCH 131 Solid Modeling Lab with AME
Dieter Schlaepfer
The Advanced Modeling Extension is a powerful solid-modeling tool integrated into AutoCAD. With a total of 30 commands and 19 variables, it is easy to learn and to use. This hands-on lab lets you work with AME topics, including creating solids using primitives, swept solids, and Boolean operations; modifying solids and extracting mass properties information; using AME presentation commands; and designing efficiently with solids.
MCH 132 Overview of Mechanical CAD for Managers and Executives
Mike Tanner
A repeat of MCH 021, 10:30-12:00 on Tuesday.
MCH 133 Using AutoCAD for Printed Circuit Design
John Sovinsky and Tom Woznick
AutoCAD is a great tool for designing circuit boards. This session shows you how to use AutoCAD's powerful commands to create PC board databases and communicate that information clearly to your board shop. RF, microwave, analog, digital, and flexible boards will be covered. Unusual shapes and angles found in RF, microwave, and analog PCBs pose no difficulty to AutoCAD, and flex circuit designs usually originate in mechanical engineering groups already using AutoCAD anyway.
MM 131 Advanced Animation with 3D Studio/ Professional Animation
Tom Hopper
A repeat of MM 121, 10:30-12:00 on Thursday.
MM 132 From Screen to Paper: How to Create the Best Image
Tim Forcade
Getting professional quality results from 3D Studio means not only producing the highest quality 3D images and animations possible, but producing them quickly, efficiently, and elegantly. You'll learn about rendering variables, image mapping controls, system memory use, and file storage as they relate to print and video production applications is essential. The class offers tips for efficiently creating and applying image maps use of shading limits, light and shadow control, and anti-aliasing parameters. An understanding of basic 3D Studio concepts as well as the use of the Render Still Image and Render Animation dialogs is non-essential but desirable.
MM 133 Adding the Human Element to Animation
Bill Allen
This session offers an overview of commercial products and programs that generate or give ready-to-use human forms. You'll learn how to create and clothe your own human forms. Topics including dealing with specific issues such as linking vs. morphing, managing complexity, dealing with collisions, choreography, and handling movement of clothing and hair.
MM 134 Designing Virtual Worlds Using 3D Studio
Charles Newcombe
A repeat of MM 041, 3:30-5:00 on Tuesday.
SCI 131 The Role of Molecular Visualization and Modeling in Science Education
Bill Glauser
The teaching of chemistry, physics, and biology has traditionally been hampered by the abstract nature of scientific concepts. This has led to the pervasive notion that science itself is perhaps tedious, boring, and irrelevant. Molecular modeling and visualization offers a powerful counter-argument. This class illustrates the ability of scientific visualization to make difficult concepts accessible and enjoyable, with specific examples taken from molecular biology, organic chemistry, and molecular physics.
TAC 131 Instructor Development for DesignExpert and ManufacturingExpert
Phil Leverault
This session addresses the issues of implementation and integration of the AutoSURF software within an educational environment. You'll learn about teaching integrated 3D wireframe design, NURBS surface technology, variable and constant 3D surface filleting, weighted blends, and automatic trimming and dynamic surface editing. The class also offers suggestions for technical and training concept
ACT 141 Developing for Generic CADD: Market Opportunities and Technical Briefing
Tom Brenner and Bob Davison
This class helps you access the full power of Generic CADD's extensive customization potential. Learn why the macro language is perfect for customizing anywhere from simple repetitive tasks to complex programs. Other topics include the Developer's Kit, the basic macro structure and language, and tips and tricks that are useful for developing with Generic CADD. You'll benefit most from this class if you're interested in developing add-on packages for Generic CADD.
ACT 142 Autodesk's Strategy in Solids & Surfaces
Kevin Moore
You'll learn about Autodesk's plans for integrating advanced tachnologies, such as NURBS and ACIS, into its next-generation 2D and 3D design-automation software.
AEC 141 CAD Management Using AutoCAD Part 2: Customization and Training
Mark Middlebrook
A repeat of AEC 042, 3:30-5:00 on Tuesday.
AEC 142 Using XREFs and Paper Space for AEC Applications
Craig Sharp
A repeat of AEC 093, 3:30-5:00 on Wednesday.
AEC 143 Automating Small & Medium Size Architectural Firms
Jim Larson
This class is a guide to CADD for the electronic architect, covering topics including the transition from drafting board to CADD; selecting the first project to put on computer; finding the best initial payback; AIA and CSI guideline layering; component libraries and log books; writing macros and creating fonts; setting drawing conventions; and the future of CADD in bringing it all together.
CAD 141 Creating & Using Custom Menus with AutoCAD Release 12
Lynn Allen
With menu customization you can tailor AutoCAD to your specific application, improving the way AutoCAD works for you. With a working knowledge of AutoCAD, modifying and creating menus is a simple process. This class explores the basics of menu creation encompassing the structure of Screen, Buttons, Pull-down, and Tablet menus.
CAD 142 Database & AutoCAD: Using ASE and SQL
Tom Santelle
This session examines many of the AutoCAD SQL Extension features and capabilities. The class covers fundamental database concepts, the application of the ASE command set, and the AutoCAD SQL Interface (ASI) development toolkit.
CAD 143 Advanced AutoLISP Workshop
David Pitzer
This session addresses topics of interest to experienced programmers. Presented in an interactive rather than a didactic manner, the specific topics depend in large part on participant interest and input. Although no specific agenda is intended, topics might include recursion in AutoLISP, handling extended entity entry, AutoLISP and the GUI (dialog boxes), and programming for efficiency.
CAD 144 Aemulus: Moving from CADAM to AutoCAD
Meg Godfrey
Mainframe CADAM sites are looking for ways to escape mainframe costs without losing their data or retraining their operators. Aemulus assists CADAM operators in three ways: expansion -- the ability to add seats at less-than-mainframe prices; transition -- a safe data migration path to an AutoCAD environment without retraining operators; and communication -- easier data sharing with vendors and off-site locations.
CAD 145 OSHA Requirements in Process Safety
Cindy Lancaster
A repeat of CAD 095, 3:30-5:00 on Wednesday.
GIS 141 Cartography and Mapping with AutoCAD
Carey Moore
AutoCAD provides an ideal environment for mapping and cartographic applications. This workshop focuses on the issues related to map projections, coordinate systems, and datum conversions as they relate to data manipulations in AutoCAD. You'll also learn about alternative data-capture methodologies, such as real-time GPS integration within AutoCAD. Other topics include data clean-up techniques such as rubbersheeting, regression adjustment and edge-matching, alternative AutoCAD-based base map management, seamless mapping tools and the integration of gray-scale, color and false-color imagery with conventional cadastry.
GIS 142 Infrastructure Management Using AutoCAD and GIS
Roy Chursinoff
GIS has tremendous applications for managing our infrastructure, such as roads and utilities. AutoCAD can assist with planning and control of operations as well as providing a fundamental base for integration of existing information systems. Infrastructures are linear (vector) based and as such have more specialized data requirements in terms of referencing systems, attribute management, and GIS than traditional information systems. This session shows how information and management systems for linear infrastructures can be integrated with AutoCAD and GIS.
MCH 141 AutoCAD Productivity Tools for Mechanical Engineering
Bill Kramer and John Wilson
A repeat of MCH 091, 3:30-5:00 on Wednesday.
MCH 142 Surface Modeling Lab with Design Expert
Dave Garbeil
AutoSurf is a sophisticated NURBS-based surface modeling package integrated into AutoCAD. In this hands-on lab, you'll get a basic overview of AutoSurf's features and benefits by working through the AutoSurf command set to create a surface model using a variety of surface techniques including swept, blend, fillet, corner, and trimmed surfaces.
MM 141 Making a Living in Multimedia
Bill Niemeyer
How do you plan and run a successful business in multimedia production? What multimedia job skills are in demand now and will be in the future? This course addresses the near- and long-term opportunities in multimedia production. Topics include how to plan your business or career; recommendations for hardware and software products for a Windows production station; how to market yourself or your business; the steps in a successful multimedia project; and how to get and stay current in a rapidly changing field.
MM 142 Authoring Systems
Richard O'Keefe
This session is an initial course into the use of authoring systems for multimedia design. You'll learn concepts and terminology, and review some of the authoring tools currently on the market as well as ongoing trends. The technology is illustrated by putting together a multimedia application using an authoring system, as animations developed with Animator Pro are imported into the application.
MM 143 Programming the Cyberspace Development Kit
Bob Holt
This course provides an overview of the Cyberspace Development Kit (CDK), a set of C++ classes designed to simplify the construction of "virtual reality" applications. The session also covers the concepts of "deck" and "space," the CDK's geometry and display systems, tips for physics simulations, and suggestions for incorporating audio in a cyberspace.
TAC 141 Instructor Development for AutoCAD Release 12, Level 2
J.C. Malitzke
This workshop is for the trainer and educator wanting to implement, improve, design, or re-design the instruction of AutoCAD as it relates to an intermediate class. You'll develop guidelines, procedures, and problem solving techniques for your company or school. Topics include planning, designing, classroom management, project design, instructional material availability, evaluation, and the implementation of AutoCAD as an integrated part of a course of study.
CAD 151 Wishlist -- What AutoCAD Users Want
Phil Kreiker
A repeat of CAD 101, 5:00-6:00 on Wednesday.
PAN 151 How to Start & Maintain an Autodesk User Group
In the spirit of continuing education, this panel's experts share their experiences with creating and building user groups. They'll talk about working with Autodesk, finding members, and succeeding over the long haul.
PAN 152 Multimedia in Theory and Practice
Multimedia -- the buzzword of the 90s. What does "multimedia" mean for AutoCAD users? On this panel, a wide variety of CAD users discuss how they use multimedia for walkthroughs, animation, presentation, and more.
PAN 153 Using AutoCAD in an International Environment
Databases from Germany. Parts from Japan. European and American standards. If you're working in more than one country, the challenge is to seamlessly integrate multiple standards automatically and efficiently. Here, experienced CAD managers tell how they succeeded.
