home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Der Mediaplex Sampler - Die 6 von Plex
/
6_v_plex.zip
/
6_v_plex
/
DISK3
/
DFUE_25
/
BGFAX110.ZIP
/
HELPME.ZIP
/
D'BRIDGE.TXT
< prev
next >
Wrap
Text File
|
1993-12-11
|
2KB
|
51 lines
--------------------------------------------------------------------------
Setup hints for using BGFAX with D'bridge 06-18-93
Randy Fox
FidoNet 1:363/60
--------------------------------------------------------------------------
Here is the Dbridge set up that we discussed about the other night.
All the people need to do is the following:
Edit the MCF File they are using. in my case BOCA3242.mcf
2) Change the "INIT" Line to look something like this:
(some additional commands may be needed for regular modem use. I left
my extras out for less confusion.)
The file starts off looking like this:
MCF Boca3242 Boca V32b/MNP/V42b
BAUD 38400
LOCKED
DELAY 60
TIMEOUT 65
PREINIT ATZ <----This line can be ommited or altered, but is only sent
once upon loading D'bridge
Boca-> INIT ATH0N1&K3+FCR=1+FAA=1+FLID="MY FAX MACHINE"
Zoom-> INIT ATN1&K3+FCR=1+FAA=1+FLID="MY FAX MACHINE"
OFFHOOK ATM0H1
etc....
(Note: in the mcf there is no blank lines between the entries, I just ran out
of room for the explaination.)
Then, they need to load dbridge and go under Utilities;Security/Miscellaneous.
In the EXTERNAL RECIEVERS box they need to enter:
FAX|C:\FAX\BGFAX /FAX
The word FAX before the pipe is the modem response, may need to be
CONNECT FAX is some instances, or +FCON. After the pipe is the command
line for the reciever. This is the quickest way to load BGFAX if you
have enough overhead ram. this is just a small dos shell method.
Another option: after the PIPE symbol, they may speccify a batch file to call
BGFAX. ie: FAX|FAX.BAT
If there is not enough over head ram, they may try swapping Dbridge out by
placing a "+" sign in front of the command line: FAX|+FAX.BAT
Or the may drop Dbridge and exit at errorlevel: FAX|*X100 (100 errorlevel)