--A Guide To Telescum Australia's Easycall Functions-- Call Waiting~~~~~~~~~~~~To Turn Call Waiting On lift reciever type in the following buttons:* 43 # Then Hang Up.To Turn Call Waiting Off lift reciever and type the following buttons:# 43 # Then Hang Up. To answer a call coming in while already talking to someone:You will hear two short "BIPS" every 5 seconds which means there isanother call coming in. To answer this call use the following buttons:RECALL 2. To Alternate Between calls RECALL 2. To release one call andhold the other RECALL 2 till you hear the person you want to releasethen RECALL 1. Third Party Enquiry/Conference~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~To create a third party in a existing call hit RECALL and then thepersons phone number. Alternating between the calls is done by RECALL 2as above and to confrenece all three people you do RECALL 3. To releaseone caller and retain the other hit RECALL 2 till you get the person youwant to hang up and then do RECALL 1. Call Control~~~~~~~~~~~~To activate facility and restrict access to phone type in the followingsequence: Lift reciever then * 33 Call Control Code # then hang up.To deactivate facility facility and restore normal access to phone:Lift reciever then # 33 Call Control Code # then hang up. Call Diversion~~~~~~~~~~~~~~To activate facility type in the following sequence into your touchfone:Lift reciever * 21 Number to which calls are to be diverted # thenhang up.To check your calls are being diverted:Dial your OWN number and see if you get a ringing tone.To deactivate facility:Lift reciever # 21 # then hang up.NB: Calls Can only be diverted to a restricted area.Call Diversion On Busy~~~~~~~~~~~~~~~~~~~~~~To activate facility:Lift reciever * 24 Number to which calls are to be diverted to # hangup.To check for diversion dial number and see if it rings.To deactivate facility:lift reciever # 24 # then hang up. Call Diversion On No Answer~~~~~~~~~~~~~~~~~~~~~~~~~~~To activate facility:Lift reciever * 61 # then hang up.To chech for diversion lift reciever * # 61 # listen for tone.To deactivate facility:Lift handset # 61 # hang Up. Delayed Hotline~~~~~~~~~~~~~~~To program a hotline number:Lift handset * 53 Hotline Number # hang up.To deactivate facility:Lift Reciever # 53 # then hang up. To Get Easycall Connected~~~~~~~~~~~~~~~~~~~~~~~~~Ring your nearest Telecom business office and they will tell you if itis available at your telephone exchange and connect if requested.Most new areas/exchanges allow easycall, as exchanges are currently
being swapped over to the new microprocessor based systems. **END OF HELP FILE**
