Labels:text | screenshot | font | black and white | white | document | number OCR: The Name Puzzle How To Make It 1. Lumber I used standard 2X4 or 2X6 to make my name wood. puzzle. be sure to find the clearest dryest 2. Starting Begin by cutting out the hook. Use the opening created by the hook to cut out the Saw blade rest of the letters. you may be able to entrance. enter and exit at the same place, keeping your frame in one piece. I had to exit the 3. bottom. Backboard once the letters are cut out and removed glue the frame to a thin backboard, Masonite works. If you had to exit the bottom of the board .T now is the time the two parts as smoothly as possible. are put together 4. Make it thinner A The dimensions of your 2X4 are really 3.5X 1.5. Lay the board on edge and Make_it 3.5 X 1. Saw off .5" of the thickness. This will K 5. Finish Make your letters stick out hal ...