home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
64'er
/
64ER_CD.iso
/
utilpc
/
trans64
/
trans64.txt
< prev
next >
Wrap
Text File
|
1994-10-04
|
1KB
|
20 lines
Trans64 Version 1.15
Trans64 is a program to transfer files between the PC and a C64 floppydrive.
The floppy is connected with a simple cable to the parallelport of the PC.
You can transfer files among virtual disks, virtual tapes, dos and the
floppydrive. Also you can transfer whole disks if a 1541, 1570 or 1571 is
connected. You can use fast transferroutines for the filetransfer. So you
can transfer a whole disk in 2 1/2 minutes to the PC and in 6 1/2 from the PC
to the floppy. With normal speed you will need 8 minutes to read the whole
disk and 13 1/2 minutes to write the whole disk.
The cable used for the connection is either the cable used by X1541 or the
cable used by Disk64E. To build the cable read the section 'cable' of the
online-help.
If you have already built a cable connect the floppy to the PC and switch it
on before you start the program. So the program will automatically detect the
cable and floppydrive connected with the PC. Otherwise select the menupoint
'configuration' and select your setup.
Bernhard Schwall
e-mail: schwall@athene.informatik.uni-bonn.de