home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software of the Month Club 1995 December
/
SOFM_Dec1995.bin
/
pc
/
dos
/
biz
/
salesreg
/
prncode.hlp
< prev
next >
Wrap
Text File
|
1995-10-31
|
3KB
|
46 lines
@PrnDesc
Printer Description - The printer description may be up to 30 charac-
ters. This description is used for reference only.
@PrnPort
Printer Port - Enter a number form 1-9. If your printer is connected
to LPT1, enter 1. If your printer is connected to COM1, enter the DOS
mode command, MODE LPT1:=COM1: in your AUTOEXEC.BAT file and enter 1
for the printer port.
@PicaCode
Pica Pitch Codes - Enter the decimal control codes to print Normal 10
characters per inch. You may enter up to ten, three digit codes.
@EliteCode
Elite Pitch Codes - Enter the decimal control codes to print ELITE 12
characters per inch. You may enter up to ten, three digit codes.
@CondCode
Condensed Pitch Codes - Enter the decimal control codes to print Con-
densed 17 characters per inch. You may enter up to ten, three digit
codes.
@ResetCode
Reset Control Codes - Enter the decimal control codes to Reinitialize
your printer.
@LMargCode
Left Margin Codes - Enter the decimal control codes used to set the
left margin.
@LSpceCode
n/216 Line Spacing Codes - Enter the decimal control codes used to
set line spacing to n/216 inch.
@LFeedCode
n/216 Line Feed Codes - Enter the decimal control codes used to per-
perform one n/216 inch line feed.
@GrafCode
Double Densisty 8-bit Graphics - Enter the decimal control codes to
print double density 8-bit graphics.
@The End
This is the end.