;--------------------------------------¢;áIJמáדןIJלסכדáכחצקחמוáהנפáגדלנמצקפIJקחמוá¢;áקזדáקרפאנáIJצצדלאכדפ«ááááááááááááááááá¢;áת≥Θ⌠⌠σ∈áΓ∙áט∩Φ∈áה∩≤δσ⌠⌠ááááמ∩÷º¨Øáááá¢;--------------------------------------¢¢¢;áקΦΘ≤á∮Θ≤⌠Θ∈τáΘ≤á∈∩⌠áβá≡≥∩τ≥βϕ«áח⌠áΘ≤á¢;áϕσ≥σ∮∙áβáπ∩∮∮σπ⌠Θ∩∈á∩µáΘ∈≤⌠≥⌡π⌠Θ∩∈≤áá¢;áβ∈Σá∮βΓσ∮≤á⌠∩áΣσϕ∩∈≤⌠≥β⌠σá⌠Φσáק⌡≥Γ∩áá¢;áIJ≤≤σϕΓ∮σ≥«ááááááááááááááááááááááááááᢢ¢; Blank lines may be used to seperate¢; sections of a listing to create a¢; clearer and a more readable listing.¢; A blank line is obtained by pressing¢; the RETURN key alone.¢¢¢; Everything with one preceeding space¢; is one of the normal 56 instructions.¢; They must be used with the correct¢; syntax otherwise an error will result¢; during assembly.¢¢¢; The semi-colon is used in the same¢; way as basics REM statement. It may¢; be used to begin a line or....¢¢¢ PHA; ....it may be used to follow¢ TXA; an instruction. Note that¢ PHA; no spaces must preceed a¢ TYA; semi-colon. Any character¢ PHA; may follow it.¢¢¢¢¢¢; A semi-colon REM may consist of upto 3 lines as shown here. More than 3 lines will cause the Turbo Assembler¢; to lock up during assembly. However, it is actually easier to type single lines rather than the multiple lines.¢¢¢¢¢¢ LDA 53665¢ LDX 54337¢ LDY #0¢ STA 203¢ BPL LINDA¢ BEQ SUSAN¢ STA 47134¢ LDA 52342,X¢ CMP 207¢ BEQ LINDA¢ CMP 209¢ BEQ LINDA¢ INC 47208¢ BPL ANGELA¢ ADC 22041¢ CLC¢¢¢;--------------------------------------¢LINDA;--This is a label. It may consist¢; of upto eight characters maximum. But¢; it must begin with a letter and it is¢; typed with no preceeding spaces.¢;--------------------------------------¢; Girls names are used as labels within¢; this demonstration listing.¢;--------------------------------------¢¢¢ DEC 23464¢SUSAN¢ BMI TANYA¢ BVS JENNIFER¢ LDA 21477,X¢ INX¢ DEY¢ STX 29445¢ANGELA¢ LDA #0¢ LDX 205¢ LDY 206¢ CPX #64¢ BEQ DANIELA¢ CPX #128¢ BEQ RACHEL¢ CPX #34¢ BPL LINDA¢ BMI SALLY¢ ROL 37994,X¢ ROL 37,X¢;--------------------¢DANIELA¢ STA 47792¢ ASL 47797,X¢ STA 52795¢SALLY¢ LDA 208¢ STA 44535¢RACHEL¢ AND #64¢ STA 208¢ STA 55943¢ AND 206¢ STA 55323¢ AND 33412¢ STA 34435¢ AND 32325,X¢ AND 32326,Y¢JENNIFER¢ LDA #255¢ STA 52133¢ STA 52335,Y¢TANYA¢ LDX 15590¢ STA 42378,X¢ ORA 47779,Y¢ JSR 63597¢ JSR 64118¢;--------------------¢LYNN¢ INC 34523¢ CMP #200¢ BEQ PATRICIA¢ LDA 16647,X¢ STX 205¢ STX 43254¢ STY 54553¢ BEQ JULIE¢ CPY #17¢PATRICIA¢ BEQ GAYNOR¢ BMI DANIELA¢ BPL SAMANTHA¢ LDA 34512¢ CMP 3241¢ BNE LYNN¢ JMP 15572¢SAMANTHA¢ LDA 15512¢ CMP #112¢ BPL PATRICIA¢ LSR 17443¢ LSR 11774¢ LSR 13759,X¢ INY¢ DEX¢JULIE¢ INX¢GAYNOR¢ STX 12779¢ STY 12780¢ CPY #128¢ BEQ NATASHA¢ INX¢ CPX #128¢ BMI NATASHA¢ ADC 51446¢ BIT 204¢ BIT 53418¢ CLC¢ STA 52231¢NATASHA¢ SEC¢ SED¢ SBC 209¢ SBC 32553¢ STA 43254¢CAROL¢ LDX 209¢ INX¢ INC 23743¢ DEC 23746¢ CPX 48337¢ BEQ SAMANTHA¢ LSR 47797,X¢ STA 203¢ LDA 47708¢ CMP 44521¢ BMI KAREN¢ LDX #48¢KAREN¢ CMP 54011¢ BEQ CAROL¢ BVC KAREN¢ BCS JANE¢ INC 52289¢ STA 205¢ CMP 42758¢ BEQ ANITA¢ LDX #255¢ LDY #255¢ANITA¢ CMP 42782¢ BPL KAREN¢ BNE HELEN¢ LDA #0¢ STA 44¢ STA 47288¢ STA 45792¢ STA 45798,X¢ JMP 203¢;--------------------¢HELEN¢ BRK¢ LDA 209,X¢ STA 44353,Y¢;--------------------¢JANE¢ BRK¢ BCC NATASHA¢ LDY 47911¢ LDX 47918¢ LDA 51774¢ STA 21118¢ INX¢ STA 20019¢ ROR 20,X¢ CPX 41187¢ BEQ WENDY¢ CPY 41188¢ BEQ MARIE¢ LDA #255¢WENDY¢ STA 44157¢ STA 44168¢ LDA #0¢ STA 43554¢ STA 42236,X¢ STA 54773,Y¢ ROR 42756,X¢ ROR 38¢MARIE¢ LDA 208¢ CMP 44312¢ BNE LAETITIA¢ LDY 36566¢LAETITIA¢ LDA #44¢ STA 42358¢ STA 23115,X¢ STA 23186,Y¢ INC 32984¢ CMP #57¢ BPL LOUISE¢ LDA 42234¢ STA 32577¢LOUISE¢ CMP #64¢ BNE LOUISE¢;--------------------¢ PLA¢ TAY¢ PLA¢ TAX¢ PLA¢ RTS¢¢¢¢;--------------------------------------¢; The END marker must be formed exactly¢; as shown below otherwise it will not¢; be recognised by the Turbo Assembler¢; and an error will result. It may be¢; positioned anywhere on the line, but¢; placed like a label as shown is the¢; clearest. The END marker must be the¢; very last instruction of any listing¢; since anything that follows it will¢; be ignored. RETURN must terminate it.¢;--------------------------------------¢¢¢<END>;áקΦΘ≤áΘ≤á⌠Φσáדמגáϕβ≥δσ≥á¢---------------------------------------¢Since everything that follows the END marker (ie. after its terminatation) is ignored by the Turbo Assembler, there is no need to use a semi-colon here to begin a line.
