home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware 1 2 the Maxx
/
sw_1.zip
/
sw_1
/
DTP
/
AS_UTILS.ZIP
/
LFONT501.EXE
/
lha
/
LOADFONT.DOC
< prev
next >
Wrap
Text File
|
1992-02-07
|
13KB
|
316 lines
LoadFont 5.01 (c)1988-91 Advance Systems 11/30/91
HP Laser-Jet SoftFont Manager
LoadFont reads a directory of, or PKZIP Archive of, SoftFonts and lets you:
Point and Pick the SoftFonts to Download to the printer.
Build a batch file for downloading the SoftFonts from DOS. This is
useful for downloading often used groups of SoftFonts to the printer.
Create custom SoftModules. A SoftModule is a grouping of SoftFonts
combined into a single file or archive that can be loaded into the
printer without a special download program.
Print sample sheets of selected SoftFonts.
Make a catalog of the Font Descriptors of selected SoftFonts.
Perform all of the above options in one operation
Download individual SoftFonts, print sample sheets of ALL SoftFonts or
make a catalog of ALL SoftFonts from the DOS command line.
WHAT'S NEW IN THIS RELEASE
Mouse Support
Font Width Tables, includes printer memory required for SoftFont
Font Descriptor File can be read on line
Improved memory allocation and speed of operation
Shell to DOS
When downloading from DOS, SoftFonts are not required to be in the
current directory
INSTALLATION and START-UP
Copy the distrubition files into an existing SoftFont directory or
create a new directory to hold the files. To run LoadFont from any
directory on the system, the SoftFont Directory must be in the PATH
as Set in the AUTOEXEC.BAT file.
Change to the SoftFont Directory C>CD\FONT [Enter], Then type
LOADFONT [Enter], to read the SoftFonts from that directory.
Use LOADFONT /Z=C:\FONT\SOFTFONTS.ZIP, to read the SoftFonts in a
PKZIP Archive. The file PKUNZIP.EXE must be in the PATH.
START-UP OPTIONS
/P=LPTn: or /P=COMn: sets the printer port. Replace n with the port
number. /P=LPT1: is the default.
/ID has LoadFont provide ID numbers for SoftFonts.
/T will print out a sample sheet for each SoftFont in the current
directory or Archive.
/D makes a catalog of the SoftFont Descriptors of all the SoftFonts in
the current directory or Archive. The file DESCRIPT.DAT will contain
the SoftFont Descriptor report.
/W creates a Width Table for each SoftFont in the current directory or
Archive. The printer memory needed to store the SoftFont is also
reported. A Width Table file has the same name as the SoftFont file
with the last character of the extension changed to a `W'.
SoftFont Descriptors and Width Tables contain information needed by some
programs that use SoftFonts. These files provide general information
and are not formatted for use with any specific program.
/T /D and /W work on ALL SoftFonts in the current directory or Archive.
These operations can be used on individual fonts from within LoadFont.
The SoftFont Descriptor file and Width Table files can be read on line
from within loadfont.
DOS DOWNLOAD
A SoftFont can be downloaded to the printer from the DOS Command line.
Example: C>LOADFONT C:\FONT\MYFONT.USP 10 P S or
C>LOADFONT /Z=C:\FONT\FONTS.ZIP MYFONT.USP 10 P S
This downloads the SoftFont MYFONT.USP to LPT1: with an ID number of 10
and designates it as Permanent and Secondary. If the printer port is
not LPT1: use the /P switch to set the proper port.
LoadFont can build a Batch file to download one or more SoftFonts from
the DOS Command line.
The files LOADFONT.EXE and PKUNZIP.EXE should be in the PATH or the
current directory.
Using a PKZIP Archive of SoftFonts saves significant disk space, the
trade off is a slight reduction in speed.
USING LOADFONT
LoadFont displays a listing of the SoftFont files from the current
Directory or Archive named with /Z= command line option.
The PgUp PgDn and Arrow keys move through the SoftFont listing.
The INS Key is used to select the SoftFont(s). Move the cursor next
to the SoftFont you want to select and press INS.
Assign an ID number between 0 and 32767 then [ENTER].
If the /ID start-up switch is used this step is skipped.
The default settings are Permanent and Primary. To use
these settings press [ENTER], or change them first. If
you're not sure press [ENTER].
The DEL Key is used to cancel a SoftFont selection.
F10 is used to select the destination(s) for the SoftFonts. You must
first select the SoftFonts as outlined above. Select one
or more destinations, then press G to execute.
If you select the Batch file option, you will be prompted
for the name of the batch file, enter the full PATH.
EXAMPLE: C:\WORD\MYBATCH.BAT
You will then be prompted for the PATH to your SoftFonts.
This will enable the Batch file to find the SoftFonts.
Remember, LOADFONT.EXE must in a PATH set in AUTOEXEC.BAT
when the Batch file is run.
If the /Z=d:\PATH\MYFONT.ZIP start-up switch is used the
PATH on the command line is used and this step is skipped.
If you select SoftModule you will be prompted for the name
of the SoftModule to build. Make sure there is room on your
disk for the file.
EXAMPLE: C:\WORD\CENTUS.MOD
To load a SoftModule into the Printer use the following DOS
command. COPY /B C:\WORD\CENTUS.MOD PRN
Archived SoftModules can be PKUNZIPed to LPT1: by using
PKUNZIP -pb SoftMod.ZIP. Use -pb2 for LPT2:, -pbc1 for COM1:
and -pbc2 for COM2:.
I like to use the Batch option with the SoftModule option to
list the fonts and ID#'s for future reference.
F1 Help key.
F2 Quit LoadFont and return to DOS.
F3 Display the DESCRIP.DAT file.
F4 DOS COMMAND LINE. Type EXIT to return to LoadFont.
F5 Clear all selected SoftFonts.
F6 Create Width Tables for the selected SoftFonts. If no SoftFonts are
selected, any Width Table files in the current Directory are
displayed.
USING THE MOUSE
Move the Mouse Pointer to one of the Commands at the top of the screen
and Click. Use the Left Button for ENTER the Right Button for ESCAPE.
Click on the up arrow or down arrow to scroll. In the Font Settings
Window move the Mouse Pointer to the empty bar between fields and Click
to accept the settings. In the Destination Window move the Mouse up and
down then Click to select. Use the Left Mouse Cord to Go.
USING SOFTFONTS
Read your word processor manual on using SoftFonts. Each has its own
method for entering Printer Escape Sequences and selecting SoftFonts.
In general, use `ESC(#X' in a document to select a SoftFont. Replace
# with the ID number of the font to use.
The Escape character can be generated by holding down the ALT key while
typing in 27 using the Numeric Key Pad. Using the new editor included
with DOS 5.0 enter `Ctrl P' first. If your word processor won't allow
you to do this try `Ctrl ['.
An alternate method to switch between a Primary and Secondary SoftFont
is to use Shift In (to the current primary font) and Shift Out (to the
secondary font). Shift In (ASCII 15) and Shift Out (ASCII 14) can be
generated by holding down the Alt key then enter the ASCII value using
the Numeric Key Pad.
Look at the files DEMO.BAT and DEMO.DOC to see an example of loading and
selecting SoftFonts using the methods described above. Run DEMO.BAT to
Load the SoftFonts and print DEMO.DOC. Compare the printed document to
the ASCII file to see how the Printer Escape Sequences are used.
Temporary SoftFonts are cleared from the printers memory when the printer
is sent a reset command. A Permanent SoftFont is not cleared until the
printer is shut off.
The SoftFonts in this package can be identified as follows:
First six characters Font Name
Seventh character R = Regular I = Italic G = Ghost
S = Shadow H =Hollow
Eighth character B = Bold On 0 = Bold Off
The first two characters of the file extension are the point size and
the last charter denotes orientation P(ortrait) or L(andscape).
WORDPERFECT PRINTER DRIVER
Register LoadFont and receive the WordPerfect Support Pac, including
the WordPerfect Printer Driver and complete instructions on installing
the LoadFont SoftFonts with WordPerfect 5.0 or 5.1. Use Ctrl F8 4 to
pick the SoftFont to use. Its that easy! Also works with WordPerfect
for Windows.
The WordPerfect Support Pac is in addition to the SoftFonts and utility
programs you receive on registration. The LFWP5x.PRS Printer Definition
file includes the information WordPerfect needs to use all the LoadFont
SoftFonts including the additional SoftFonts shipped with your paid
registration.
80286 80386 80486 CPU's AND WINDOWS
LoadFont v 5.01-op takes advantage of the expanded instruction set of
the 80286 microprocessor to increase performance and speed while
reducing memory requirements. Version 5.01-op is a must for the Windows
environment. LoadFont v 5.01-op is available directly from Advance
Systems and is not distributed through other sources. The registration
fee for this version is $35.00.
IMPORTANT NOTICE
LoadFont is NOT free, this copy is for evaluation purposes only. Repeated
use of the program or SoftFonts, in total or in part, is evidence of
suitability. Evidence of suitability means that you have found this
program package to be useful and you are required to register.
Register LoadFont v 5.01. Receive 2 archived disks of SoftFonts and
LaserJet Utilities - FREE! and the most recent version of LoadFont.
Over 1.3mb of Files! Registration is $25.00.
Print out and fill in the ORDER.FRM file in this package and mail to:
Advance Systems
215 W. Amosland Rd.
Norwood, Pa. 19074-1502
A-Ware ADVERTISING SOFTWARE
This program package is available as A-Ware, Advertising Software. The
registration screen displayed at the beginning and end of LoadFont is
replaced with your full-screen color advertisement. A-Ware is sold in
master disk format and includes unlimited license to copy, distribute and
upload onto computer BBS etc. The A-Ware version of LoadFont contains
the additional SoftFonts and WordPerfect Support Pac included with the
Shareware registration. There are no registration screens or
solicitations in the A-Ware version of LoadFont or the documentation.
Advance Systems will work with you to develop a screen advertisement.
Call 24 hrs for more information.
A-Ware is a service mark of Advance Systems, Norwood, Pa. 215 532-0950
TECHNICAL SUPPORT
Telephone
Help and Tech Support are available to Registered Users Mon-Fri 10am
to 5pm EST.
Voice Mail is accepted from All Users to report any problems or comments
and suggestions. Call Anytime 24 hrs. 215 532-0950
FAX
215 532-5649
EMail
Compuserve 74425,257
Delphi AWARE
Genie J.SAVOIA
LaserColor
Call, FAX, or EMail for information about LaserColor and to receive a
Free Sample. Read the file DEMO.DOC or run DEMO.BAT for more
information.
PRINTER SHARING
Advance Systems is an Authorized Dealer for the Smart Print automatic
electronic printer sharing systems: SmartPrint to share one Laser
Printer with up to six computers and The Intelligent Printer Switch to
use up to six Printers with one computer.
LAST WORD
Advance Systems is a small family business that exist only through the
continued support of our customers, Thank You.