home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1998 January
/
CHIPCD1_98.iso
/
drivers
/
grafika
/
tseng
/
et6035
/
readme.txt
< prev
next >
Wrap
Text File
|
1997-10-07
|
3KB
|
126 lines
README.TXT FILE FOR
Tseng Labs, Inc.
Tseng Labs Windows NT 3.51 Display Driver
(C) Copyright 1997. Tseng Labs, Inc.
All rights reserved.
DRIVER INFORMATION
Driver Name: Tseng Labs Windows NT 3.51 Display Driver
for ET6000/W32P/W32I/W32/ET4000 chipsets
Driver Date: 10/7/97
Driver Release: 2
Driver Disk Contents:
W32.DLL (DISPLAY DRIVER)
W32.SYS (MINIPORT)
#ET6000.35 (Contains Text String Driver Identification)
OEMSETUP.INF (Win NT 3.51 Driver Installation File)
README.TXT (This file you are reading)
SYSTEM REQUIREMENTS
Operating System: Windows NT 3.51 build (1057)
Tseng Graphics chip support: ET6000/W32P/W32I/W32/ET4000
RELEASE 2:
Release 2 is strictly a bug fix release. No new features have been
added.
DRIVER INSTALLATION PROCEDURE
1. Open "Control Panel"
2 Open "Display "
3. Select "Change Display Type" in the "Display Setting" Window
4. In the "Adapter Type Section" of the "Display Type" Window ,select
change.
5. Select "other" in the "Select Device" Window
6. Type A:\ (floppy drive letter) in the "Install from Disk" Window
and select "OK"
7. With 'Tseng Labs ET4000\W32\ET6000' highlighted in the "Select
Device" Window, select "Install"
8. Select "YES" to query "This operation will change your
configuration. Do you want to proceed anyway?" in the "Installing
Driver" Window.
9. Select "New" in the "Windows NT Setup" Window
10. Select "Continue" in the "Windows NT Setup" Window
11. Select "OK" in "Installing Driver" Window
12. Select "OK" in response to "The driver could not be started
dynamically. Please restart Windows NT to run with the new driver"
13. Remove the floppy disk and select "Restart Now" in the "Display
Settings Change " Window
14. After restarting, select "OK" in the "Invalid Display Settings"
Window to "A new graphics driver has been installed. The default
display resolution has been temporarily used by the system. Use
the display option in the Win NT Control Panel to select your
preferred resolution"
15. From the Win NT Control Panel, select "list all modes" and
from the list of valid modes, choose a mode and select "OK"
16. From the Win NT Control Panel, select "test"
17. Select "Restart Now" to query in "Display Settings Change" Window