README.TXT FILE  FOR

Tseng Labs, Inc.
Tseng Labs Windows NT 3.51 Display Driver 
(C) Copyright 1997. Tseng Labs, Inc.
All rights reserved.

DRIVER INFORMATION

Driver Name:           Tseng Labs Windows NT 3.51 Display Driver 
                       for ET6000/W32P/W32I/W32/ET4000 chipsets
Driver Date:           10/7/97
Driver Release:        2 
Driver Disk Contents:
        W32.DLL         (DISPLAY DRIVER)
        W32.SYS         (MINIPORT)
        #ET6000.35      (Contains Text String Driver Identification) 
        OEMSETUP.INF    (Win NT 3.51 Driver Installation File)
        README.TXT      (This file you are reading)

SYSTEM REQUIREMENTS

        Operating System:   Windows NT 3.51 build (1057)
        Tseng Graphics chip support:  ET6000/W32P/W32I/W32/ET4000

RELEASE 2:
Release 2 is strictly a bug fix release. No new features have been 
added.

DRIVER INSTALLATION PROCEDURE

1.  Open "Control Panel"
2   Open "Display "
3.  Select "Change Display Type" in the "Display Setting" Window
4.  In the "Adapter Type Section" of the "Display Type" Window ,select 
    change.
5.  Select "other" in the "Select Device" Window
6.  Type A:\ (floppy drive letter) in the "Install from  Disk" Window
    and select "OK"
7.  With 'Tseng Labs ET4000\W32\ET6000' highlighted in the "Select 
    Device" Window, select "Install"
8.  Select "YES" to query "This operation will change your 
    configuration. Do you want to proceed anyway?" in the "Installing
    Driver"  Window.
9.  Select "New" in the "Windows NT Setup" Window 
10. Select "Continue" in the "Windows NT Setup" Window 
11. Select "OK" in "Installing Driver" Window
12. Select "OK" in response to "The driver could not be started 
    dynamically. Please restart Windows NT to run with the new driver"
13. Remove the floppy disk and select "Restart Now" in the "Display
    Settings Change " Window 
14. After restarting, select "OK" in the "Invalid Display Settings" 
    Window to "A new graphics driver has been installed. The default
    display resolution has been temporarily used by the system. Use
    the display option in the Win NT Control Panel to select your 
    preferred resolution" 
15. From the Win NT Control Panel, select "list all modes" and 
    from the list of valid modes, choose a  mode and select "OK"
16. From the Win NT Control Panel, select "test"
17. Select "Restart Now" to query in "Display Settings Change" Window