25 No new routing protocols are available for installation.
26 The router service is stopped on the selected machine.\n\nDo you want to start the router service?
27 No new router-managers are available for installation
28 No new LAN adapters are available for installation.
29 No new router interfaces are available for addition.
30 Please select at least one row.
31 Click the network adapter that you want to add, then click OK.
32 Click the interface that you want to enable the routing manager on, then click OK.
33 Click the interface that you want to enable the routing protocol on, then click OK.
34 Click the routing manager that you want to add, then click OK.
35 Click the routing protocol that you want to add, then click OK.
36 &Network adapters:
37 &Interfaces:
38 &Routing managers:
39 &Routing protocols:
40 Check the router-managers that you want to enable on the interface, then click OK.
41 Check the routing-protocols that you want to enable on the interface, then click OK.
42 Select Network Adapter
43 Select Interface
44 Select Routing Manager
45 Select Routing Protocol
46 Select Routing Managers
47 Select Routing Protocols
48 %1 was not added successfully; continue with configuration?
49 Please select at least one column.
50 Scale: 1:%1
51 Unknown
52 Client
53 Home router
54 Demand-dial
55 Internal
56 Dedicated
57 Non-operational
58 Disconnected
59 Calling back
60 Listening
61 Authenticating
62 Authenticated
63 Initializing
64 Unknown
65 You have selected IPX, which will require you to configure the following protocols:\n%1\nDo you still wish to add IPX on the interface?
66 Select Interface for %1
67 %1 second(s) elapsed
68 Waiting for service to start...
69 Waiting for service to stop...
70 %1 second(s)
71 The interface is disconnected.
72 Connecting
73 Disconnected
74 Connected
75 An error occurred while connecting the interface..\n%1
100 General
1000 LAN and Demand Dial Interfaces
1001 Type
1002 Router Manager
1003 Protocols
1004 Last Refresh
1005 Unable to add phonebook entry: make sure you have the necessary permissions and access to the machine.
1006 No ports have been configured for routing. Configure ports for routing in Network in Control Panel by selecting the Routing and Remote Access Service and clicking Properties. In the Remote Access Setup dialog box, select a port and then click Configure. In the Configure Port Usage dialog box, select the Routing check box and click OK.
1007 Error deleting interface: make sure the Router service is running and you have the necessary permissions and access to the machine.
1008 NT MPR Interface Administrator
1009 The interface can not be added remotely. Check the installation of the router administration tool.
1010 The interface phone book entry can not be edited remotely. Check the installation of the router administration tool. This step will be skipped.
1011 ;
1012 Status
1013 Connection State
1014 Connected
1015 Disconnected
1016 The router service is not started. Interfaces can only be added and configured when the router service is running.
1017 No interface is selected.
1018 Enabled
1019 Disabled
1020 Connecting
1021 The selected interface is disabled. Please enable before attempting to connect.
1022 This router is currently configured for LAN routing only.\nPlease enable demand-dial by re-installing before adding demand-dial interfaces.
1025 The Password field is empty.\nPlease press Yes to remove the interface's current password or No to leave it unchanged.
1026 \nInterface was not loaded by the router service. Check event log for details. \n
1027 \nAll devices are busy. There are no ports available for the interface to establish a connection. \n
1028 Last connection attempt failed due to :\n
1029 \nThe router service is paused.\n
1030 Unreachable
1031 \nInterface has been disabled.\n
1032 \nThe router is not running on the specified machine.\n
32781 Remove selected interface from router.\nRemove Interface
32782 Add an interface to the router.\nAdd Interface...
32783 Configure the selected interface.\nConfigure Interface...
32784 Set the dial-out credentials for the interface.\nSet Credentials...
57344 Routing and RAS Administrator
61440 Are you sure you want to remove the selected interface?
61441 The Password and Confirm Password fields do not match.\nPlease enter the same string in both fields.
61442 An error occurred while connecting to the router:\n%1
61443 The interface could not be accessed:\n%1
61444 The credentials for the interface could not be saved:\n%1
61445 Do you wish to continue configuring the interface?\nThe credentials can be set at a later time by choosing the 'Set Credentials' menu-item.
61446 The following error occurred:\n%1
61447 The credentials for this interface could not be retrieved:\n%1
61448 The configuration for this interface is invalid. Please check your configuration:\n%1
61449 \nWAN routing is required to add a demand-dial interface.