1	MPRInterfaceAdmin Control
2	MPRInterfaceAdmin Property Page
3	Tables
25	No new routing protocols are available for installation.
26	The router service is stopped on the selected machine.\n\nDo you want to start the router service?
27	No new router-managers are available for installation
28	No new LAN adapters are available for installation.
29	No new router interfaces are available for addition.
30	Please select at least one row.
31	Click the network adapter that you want to add, then click OK.
32	Click the interface that you want to enable the routing manager on, then click OK.
33	Click the interface that you want to enable the routing protocol on, then click OK.
34	Click the routing manager that you want to add, then click OK.
35	Click the routing protocol that you want to add, then click OK.
36	&Network adapters:
37	&Interfaces:
38	&Routing managers:
39	&Routing protocols:
40	Check the router-managers that you want to enable on the interface, then click OK.
41	Check the routing-protocols that you want to enable on the interface, then click OK.
42	Select Network Adapter
43	Select Interface
44	Select Routing Manager
45	Select Routing Protocol
46	Select Routing Managers
47	Select Routing Protocols
48	%1 was not added successfully; continue with configuration?
49	Please select at least one column.
50	Scale: 1:%1
51	Unknown
52	Client
53	Home router
54	Demand-dial
55	Internal
56	Dedicated
57	Non-operational
58	Disconnected
59	Calling back
60	Listening
61	Authenticating
62	Authenticated
63	Initializing
64	Unknown
65	You have selected IPX, which will require you to configure the following protocols:\n%1\nDo you still wish to add IPX on the interface?
66	Select Interface for %1
67	%1 second(s) elapsed
68	Waiting for service to start...
69	Waiting for service to stop...
70	%1 second(s)
71	The interface is disconnected.
72	Connecting
73	Disconnected
74	Connected
75	An error occurred while connecting the interface..\n%1
100	General
1000	LAN and Demand Dial Interfaces
1001	Type
1002	Router Manager
1003	Protocols
1004	Last Refresh
1005	Unable to add phonebook entry:  make sure you have the necessary permissions and access to the machine.
1006	No ports have been configured for routing.  Configure ports for routing in Network in Control Panel by selecting the Routing and Remote Access Service and clicking Properties.  In the Remote Access Setup dialog box, select a port and then click Configure.  In the Configure Port Usage dialog box, select the Routing check box and click OK.
1007	Error deleting interface: make sure the Router service is running and you have the necessary permissions and access to the machine.
1008	NT MPR Interface Administrator
1009	The interface can not be added remotely.  Check the installation of the router administration tool.
1010	The interface phone book entry can not be edited remotely.  Check the installation of the router administration tool.  This step will be skipped.
1011	; 
1012	Status
1013	Connection State
1014	Connected
1015	Disconnected
1016	The router service is not started.  Interfaces can only be added and configured when the router service is running.
1017	No interface is selected.
1018	Enabled
1019	Disabled
1020	Connecting
1021	The selected interface is disabled. Please enable before attempting to connect.
1022	This router is currently configured for LAN routing only.\nPlease enable demand-dial by re-installing before adding demand-dial interfaces.
1025	The Password field is empty.\nPlease press Yes to remove the interface's current password or No to leave it unchanged.
1026	\nInterface was not loaded by the router service.  Check event log for details. \n
1027	\nAll devices are busy.  There are no ports available for the interface to establish a connection.  \n
1028	Last connection attempt failed due to :\n
1029	\nThe router service is paused.\n
1030	Unreachable
1031	\nInterface has been disabled.\n
1032	\nThe router is not running on the specified machine.\n
32781	Remove selected interface from router.\nRemove Interface
32782	Add an interface to the router.\nAdd Interface...
32783	Configure the selected interface.\nConfigure Interface...
32784	Set the dial-out credentials for the interface.\nSet Credentials...
57344	Routing and RAS Administrator
61440	Are you sure you want to remove the selected interface?
61441	The Password and Confirm Password fields do not match.\nPlease enter the same string in both fields.
61442	An error occurred while connecting to the router:\n%1
61443	The interface could not be accessed:\n%1
61444	The credentials for the interface could not be saved:\n%1
61445	Do you wish to continue configuring the interface?\nThe credentials can be set at a later time by choosing the 'Set Credentials' menu-item.
61446	The following error occurred:\n%1
61447	The credentials for this interface could not be retrieved:\n%1
61448	The configuration for this interface is invalid.  Please check your configuration:\n%1
61449	\nWAN routing is required to add a demand-dial interface.