home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 10 Tools
/
10-Tools.zip
/
tolkit45.zip
/
os2tk45
/
help
/
fontedit.hlp
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1999-05-12
|
29KB
|
1,011 lines
ΓòÉΓòÉΓòÉ 1. Help for the Edit Menu ΓòÉΓòÉΓòÉ
Edit Help
Use these choices to move characters in and out of the clipboard.
Cut
Moves the selected character to the clipboard.
Copy
Copies the selected character to the clipboard.
Paste
Puts the contents of the clipboard into the editing window.
Undo
Removes the last change made to a character.
Reset
Removes all changes made to a character.
ΓòÉΓòÉΓòÉ 2. Cut Help ΓòÉΓòÉΓòÉ
Puts the character from the editing window into a temporary buffer called the
clipboard, and erases it from the editing window.
To copy the character in the clipboard into a particular code point, select the
character with that code point. Then use PASTE (on the EDIT pull-down) to copy
the clipboard character into the editing window. It replaces the selected
character, and is given the code point of that character. You can then alter
the new character.
ΓòÉΓòÉΓòÉ 3. Copy Help ΓòÉΓòÉΓòÉ
Puts a copy of the character from the editing window into a temporary buffer
called the clipboard, leaving the character in the editing window.
To put the character in the clipboard into a particular code point, select the
character with that code point. Then use PASTE (on the EDIT pull-down) to copy
the clipboard character back into the editing window. It replaces the selected
character, and is given the code point of that character. You can then make
changes to the character.
ΓòÉΓòÉΓòÉ 4. Paste Help ΓòÉΓòÉΓòÉ
Gets a character from a temporary buffer called the clipboard, and puts it into
the editing window. The only type of clipboard data that may be pasted is a
bitmap.
The clipboard bitmap replaces any character that is already in the editing
window, but does not change the code point for that character.
When the clipboard bitmap buffer is empty, PASTE is unavailable.
ΓòÉΓòÉΓòÉ 5. Undo Help ΓòÉΓòÉΓòÉ
Removes the last change you made to the current character.
You can only undo the last thing you did in the editing window.
If your last action was to save the character, and its appearance is changed in
the list of characters, UNDO has no effect.
If you want to undo several changes, it may be easier to start editing the
character again, (use RESET on the EDIT pull-down).
ΓòÉΓòÉΓòÉ 6. Reset Help ΓòÉΓòÉΓòÉ
Removes any changes that have been made to the current character since it was
selected from the list of characters.
ΓòÉΓòÉΓòÉ 7. File Help ΓòÉΓòÉΓòÉ
Use the choices on the FILE pull-down to select the files you want to edit, and
to save them when you are done.
New
Starts a new font.
Open
Edits an existing font.
Save
Saves a font under the existing name.
Save As
Saves a font under a new name.
ΓòÉΓòÉΓòÉ 8. New Help ΓòÉΓòÉΓòÉ
Choose NEW to create a new font.
When you select NEW, a default font is shown. You can then modify the default
font to create your own font.
ΓòÉΓòÉΓòÉ 9. Open Help ΓòÉΓòÉΓòÉ
Opens an existing font file, so you can edit the characters.
You can choose to save the changes to the current font (if there are any).
A dialog box asks you for the name of the font file. You can type in the file
name, or choose it from a list of existing files.
When you open the font file, the characters in the font are shown in the list
at the bottom of the window.
ΓòÉΓòÉΓòÉ 10. Save Help ΓòÉΓòÉΓòÉ
Choose SAVE to save the current font.
If it is a new font, you are prompted for a file name. The file is stored in
the directory shown in the dialog box, unless you type in a different path.
You can save immediately by pressing Alt+F3.
ΓòÉΓòÉΓòÉ 11. Save As Help ΓòÉΓòÉΓòÉ
Choose SAVE AS to save the current font under a different file name.
A dialog box prompts you for a file name. The file is stored in the directory
shown in the dialog box, unless you type in a different path.
ΓòÉΓòÉΓòÉ 12. Header Help ΓòÉΓòÉΓòÉ
Use these choices to define the type you are creating.
Naming
Specifies type face name, code page information, and other identification
details.
General
Specifies spacing (fixed or proportional), type face style, line width, and
type weight.
Sizes
Specifies the type dimensions.
Relations
Specifies character slope, character rotation, and inline direction, and
subscript, superscript, underscore, and strikeout sizes and positions.
Definition
Specifies the method of determining character-spacing (only available for
proportional fonts).
ΓòÉΓòÉΓòÉ 13. Naming Help ΓòÉΓòÉΓòÉ
Use these fields to identify the font.
The Type face name can be anything you like.
The Family name should be the name of an existing type-family that is visually
similar to the font you create.
The Font family class should be set to an appropriate class for the font.
The Font family subclass should be set to an appropriate subclass for the font.
The possible subclasses will change based on the font family class that you
select.
The Registry ID is the IBM registry number for the font. This is zero if it is
not registered.
Click on Protected if the type face can only be used under a license agreement
with its copyright owner.
The Character set/code page is the registered code page supported by the font
(0-4095). This is set to 850 if using the Universal Glyph List (UGL) font.
The First char code point is the code number of the first character in the
font, and the Last char code point is the code number of the last character in
the font. All numbers in between must represent a character in the font.
The Default char code point is the code of the character to be used if a code
point outside the range of the font is passed to the application using the
font.
The Break char code point is the code of the SPACE or BREAK character for this
font.
ΓòÉΓòÉΓòÉ 14. General Help ΓòÉΓòÉΓòÉ
Style options refer to the type style. Different styles are created by varying
the serifs, the angle of stress (diagonal or vertical), and the contrast
between thick and thin strokes. Spacing refers to how much space appears
between characters. Fixed spacing means that the same amount of space separates
each character. Proportional spacing means the space each character occupies is
in proportion to its actual width. Width refers to the relative width of a
character to its height; condensed fonts are very narrow while expanded fonts
are very wide. Weight refers to the line thickness of the character relative
to its size.
The Standards compliance checkbox indicates whether this font has been tested
for conformance to ISO Standard 9241 part 3 (visual displays). This box
reflects the setting of the ISO 9241 flag in the selection flag word of the
font metrics structure. When the font has been tested, a code number for the
appropriate visual display(s) is shown in each of the entry fields marked
"Passes" and "Fails". You can set these numbers when you edit a font which has
been tested for conformance. Each entry field will contain an integer in the
range 0-255. The bits indicate whether the corresponding visual display passed
or failed. The coding of the bits for the displays is given in "Presentation
Manager Programming Reference Volume III" in the appendix defining the
font-file format.
ΓòÉΓòÉΓòÉ 15. General Help ΓòÉΓòÉΓòÉ
Character Set Contents defines what sets of characters are avaiable in the
font. A character set normally represents a Script in which one or more
languages is represented.
You should set the contents bit for a particular character set, if the font
contains all or most of the characters for that character set. These content
bits are made available to the application in the fsDefn field of FONTMETRICS.
Latin refers to the characters needed to represent Western European languages.
PC extended refers to extra characters in the PC character set such as box
corners.
Other Latin refers to the characters needed to represent Central and Eastern
European languages.
Cyrillic refers to the characters needed to represent Russian and other similar
languages.
Hebrew refers to the characters needed to represent Hebrew.
Greek refers to the characters needed to represent modern Greek.
Arabic refers to the characters needed to represent Arabic and related
languages.
UGL exteneded refers to the extra Apple and publishing characters.
Katakana refers to characters need for the Japanese phonetic alphabet.
Thai refers to the characters needed to represent Thai.
ΓòÉΓòÉΓòÉ 16. Sizes Help ΓòÉΓòÉΓòÉ
Specify the font character dimensions (in pels, unless otherwise stated).
Nominal vert point size is the normal display size of the font. Minimum vert
point size and Maximum vert point size are, respectively, the minimum and
maximum vertical dimensions that the font can be resized to. These are all
specified in decipoints.
Target dev resolution X and Target dev resolution Y are, respectively, the
number of pels per inch in the horizontal and vertical axes of the target
display device.
Max char increment is the maximum horizontal distance from the left edge of one
character to the left edge of the next character to the right.
Max baseline extent is the sum of the maximum ascender and the maximum
descender.
Em increment is the width of the 'EmSquare'.
Average char width is the average horizontal distance from the left edge of one
character to the left edge of the next. This is calculated with a weighted
average of lowercase widths.
Internal leading is the vertical distance from the top of a character to any
accent marks that may appear with it. External leading is the recommended
vertical distance from the bottom of one character to the top of the character
below it. Used for recommended interline spacing.
Maximum ascender and Maximum descender are the maximum distances that any part
of any character may extend above or below the baseline.
Em height is the height of the 'EmSquare' which represents the point size of
the font in device coordinates.
'x' height is the distance above the baseline reached by lowercase symbols (the
height of the lowercase 'x').
Lowercase ascent and Lowercase descent are, respectively, the distances above
and below the baseline reached by any part of any lowercase symbol in the font.
Baseline offset is the full height of the character, from the baseline to the
top of the character box.
ΓòÉΓòÉΓòÉ 17. Relations Help ΓòÉΓòÉΓòÉ
Specify the position of the characters.
The Character slope is the angle by which each character is slanted, increasing
clockwise from vertical.
The Inline direction is the angle of the line of type, increasing clockwise
from horizontal.
The Character rotation is the angle by which each character is rotated around
its own center, increasing clockwise from vertical.
The Underscore size is the size of the underscore character, measured in single
strikeout strokes. The Underscore position is the distance in pels below the
baseline of the first (lowest) underscore stroke. This is specified as a
positive distance.
The Strikeout size is the size of the strikeout character. The Strikeout
position is the distance of the strikeout character above the baseline (in
pels).
Subscript size and Superscript size are, respectively, the size of subscript
and superscript characters (in pels).
Superscript position and Subscript position are, respectively, the distances of
superscript and subscript characters above and below the baseline (in pels).
ΓòÉΓòÉΓòÉ 18. Definition Help ΓòÉΓòÉΓòÉ
Specify how a proportional font determines its spacing.
specify a, b, c spaces separately means that you will specify these values:
a - the distance from the left of the character frame to the left edge of the
actual character (left side bearing).
c - the distance from the right edge of the actual character to the right of
the character frame (right side bearing).
Specify increment (a+b+c) means that you give only one value for the entire
character increment, instead of three.
Character space values
Type in values for both the a space and the c space; these must be in the range
-256 to +256. Negative values allow adjacent character frames (but not the
characters themselves) to overlap.
These values are used for all the characters in the font.
ΓòÉΓòÉΓòÉ 19. Shift Help ΓòÉΓòÉΓòÉ
Inserts or deletes a one-pel-wide row or column in the editing window. After
selecting one of these, you must clink on the character window.
Up Row
Move the character up and inserts a blank row at the bottom.
Down Row
Move the character down and inserts a blank row at the top.
Insert Row
Inserts a horizontal row of pels.
Delete Row
Deletes a horizontal row of pels.
Insert Column
Inserts a vertical column of pels.
Delete Column
Deletes a vertical column of pels.
Cancel Choice
Cancels any of the other shift modes without adding or deleting any pels.
ΓòÉΓòÉΓòÉ 20. Insert Row Help ΓòÉΓòÉΓòÉ
Adds a horizontal row of pels to the character.
When you select INSERT ROW, the pointer changes shape so you can position it
over the required row.
Click button 1 to insert the new row.
If the pointer is above the baseline, the rows above are pushed up to make
room. If it is below the baseline, the rows below are pushed down.
ΓòÉΓòÉΓòÉ 21. Delete Row Help ΓòÉΓòÉΓòÉ
Removes a horizontal row of pels from the character.
When you select DELETE ROW, the pointer changes shape so you can position it
over the required row.
Click button 1 to delete the row.
If the pointer is above the baseline, the rows above are pushed down. If it is
below the baseline, the rows below are pushed up.
ΓòÉΓòÉΓòÉ 22. Insert Column Help ΓòÉΓòÉΓòÉ
Adds a vertical column of pels to the character.
When you select INSERT COLUMN, the pointer changes shape so you can position it
over the required column.
Click button 1 to insert the new column.
If the pointer is in the left half of the character, columns are pushed to the
left to make room. If it is in the right half of the character (or the exact
center), the columns are pushed to the right.
ΓòÉΓòÉΓòÉ 23. Delete Column Help ΓòÉΓòÉΓòÉ
Removes a vertical column of pels from the character.
When you select DELETE COLUMN, the pointer change shape so you can position it
over the required column.
Click button 1 to delete the column.
If the pointer is in the left half of the character, columns are pushed to the
right to close the gap. If it is in the right half of the character (or the
exact center), the columns are pushed to the left.
ΓòÉΓòÉΓòÉ 24. Width Help ΓòÉΓòÉΓòÉ
These choices change the width of a single character. They are only available
when you are editing a proportional font.
Narrower Left
Deletes a column of pels from the left.
Narrower Right
Deletes a column of pels from the right.
Narrower Both
Deletes a column of pels from both sides.
Wider Left
Adds a column of pels to the left.
Wider Right
Adds a column of pels to the right.
Wider Both
Adds a column of pels to both sides.
Set Character Increment
Sets the width for the character.
ΓòÉΓòÉΓòÉ 25. Narrower Left Help ΓòÉΓòÉΓòÉ
Removes a one-pel-wide column from the left of the current character,
decreasing the character increment.
ΓòÉΓòÉΓòÉ 26. Narrower Right Help ΓòÉΓòÉΓòÉ
Removes a one-pel-wide column from the right of the current character,
decreasing the character increment.
ΓòÉΓòÉΓòÉ 27. Narrower Both Help ΓòÉΓòÉΓòÉ
Removes a one-pel-wide column from both sides of the current character,
decreasing the character increment.
ΓòÉΓòÉΓòÉ 28. Wider Left Help ΓòÉΓòÉΓòÉ
Adds a one-pel-wide column to the left of the current character, increasing the
character increment.
If this makes the character wider than the maximum character width, a message
asks you to confirm that the maximum character width should be increased.
ΓòÉΓòÉΓòÉ 29. Wider Right Help ΓòÉΓòÉΓòÉ
Adds a one-pel-wide column to the right of the current character, increasing
the character increment.
If this makes the character wider than the maximum character width, a message
asks you to confirm that the maximum character width should be increased.
ΓòÉΓòÉΓòÉ 30. Wider Both Help ΓòÉΓòÉΓòÉ
Adds a one-pel-wide column to both sides of the current character, increasing
the character increment.
If this makes the character wider than the maximum character width, a message
asks you to confirm that the maximum character width should be increased.
ΓòÉΓòÉΓòÉ 31. Set Character Increment Help ΓòÉΓòÉΓòÉ
Allows you to change the character spacing of a character in a proportional
font. The values you provide depend on the Character Increment option
specified in the CHANGING DEFINITION dialog.
If you selected a, b, c spaces specified separately in CHANGING DEFINITION,
enter values for:
"a" the preceding width
"c" the succeeding width.
Note: the b value is obtained from the actual character cell width
If you selected Increment (a+b+c) only in CHANGING DEFINITION, just enter the
overall character width in the Set Character Increment dialog.
ΓòÉΓòÉΓòÉ 32. About the Font Editor ΓòÉΓòÉΓòÉ
Use the Font Editor to design your own type faces, alphabets, and symbols,
which you can save and use in application programs.
A font is a set of letters, numerals, punctuation characters, and other symbols
that share a common type face design and line weight.
To edit a font, use the choices on the FILE pull-down to open a new or existing
file.
The editing window shows the character you are working on. The smaller viewing
window (to the right of the editing window) shows the character's actual size.
The list of characters below the editing window shows the other characters of
the font. To edit a different character, click on it.
Characters are displayed black on white in the editing window. Click on a pel
to change its color. You can change a series of pels by dragging the mouse
through them.
Use the EDIT pull-down to cut and paste characters.
Use the HEADER pull-down to set the type specifications (for example, line
weight or proportional spacing).
Use the WIDTH pull-down to change the width of proportionally-spaced characters
in the editing window.
Use the SHIFT pull-down to insert or delete a row or column of pels.
When you finish editing the font, select the FILE or EXIT pull-downs to save
the file to disk.
To get help for a pull-down choice, hold mouse button 1 down over the choice
while you press the F1 key. To see a list of help topics, click on the INDEX
pushbutton on the help window. Select a topic, then press Enter to see the help
for that topic.
ΓòÉΓòÉΓòÉ 33. Keys Help ΓòÉΓòÉΓòÉ
The keys are arranged in groups. Use:
- application keys to control the fontedit application
- system keys to switch between programs
- window keys to move around in a program window
- dialog box keys to select and edit in dialog boxes.
When two key names are joined by a plus sign (+), it means that you should hold
down the first key while you press the second key.
APPLICATION KEYS
move to the next character = PgDn
move to the previous character = PgUp
move forward 16 characters = Ctrl+PgDn
move backward 16 characters = Ctrl+PgUp
save the current file = F2
exit the font editor = F3
SYSTEM KEYS
switch to next windowed program = Alt+tab or click on window
switch to next program (including full-screen programs) = Alt+Esc
switch to Task Manager = Ctrl+Esc or click on icon
WINDOW KEYS
go to/from system menu = Shift+Esc or Alt+spacebar
go to/from system menu of text window = Shift+Esc or Alt
go to/from action bar = F10 or Alt
move among choices on action bar and pulldowns = arrow keys
move to choice on action bar = letter that is underlined in choice name
select choice on pull-down = letter that is underlined in choice name
scroll one line in list = arrow keys or click on scroll bar arrows
go to first item in list = Home
go to last item in list = End
go to next list entry whose name starts with a certain letter = first letter of
entry name
scroll contents of window up one page = Page Up or F7 or click on scroll bar
above slider
scroll contents of window down one page = Page Down or F8 or click on scroll
bar below slider
scroll contents of window left one page = Ctrl+Page Up, Shift+F7, or click on
scroll bar to left of slider
scroll contents of window right one page = Ctrl+Page Down, Shift+F8, or click
on scroll bar to right of slider
move window = Alt+F7 or drag window title bar
size window = Alt+F8 or drag window border
minimize window = Alt+F9 or click on "down arrow" icon
maximize window = Alt+F10 or click on "up arrow" icon
restore window = Alt+F5 or click on "double arrow" icon
close window = F3 or Alt+F4 or double-click on system menu
get help = F1 or hold mouse button down over choice and press F1
keys help (while in help) = F9 or click on KEYS pushbutton
help index (while in help) = F11 or Alt+F1 or click on INDEX pushbutton
go to/from help and program = Alt+F6 or click on window
DIALOG BOX KEYS
move to another field in the group = arrow keys or click on field
move to another group of fields = tab or click on group
set checkbox on/off = Spacebar or click on checkbox
remove dialog box = Esc or click on CANCEL pushbutton
complete dialog box = Enter or click on appropriate pushbutton
EDITING KEYS
beginning of field = Home or Ctrl+left arrow key
end of field = End or Ctrl+right arrow key
delete character to the right of the cursor = Del
delete character to the left of the cursor = Left arrow delete (backspace) key
erase to end of field = Ctrl+Del
select text in field = Shift+arrow keys or Shift+drag
delete selected text completely = Del
delete selected text, but copy it to clipboard = Shift+Del
copy selected text to clipboard = Ctrl+Ins
copy selected text from clipboard to cursor position = Shift+Ins
replace selected text with clipboard contents = Shift+Ins
ΓòÉΓòÉΓòÉ 34. Spacing Help ΓòÉΓòÉΓòÉ
The list shows characters that do not fit the width you set using Set Character
Increment on the Width pull-down.
You can return to the file and change the widths of the listed characters, or
save it.
ΓòÉΓòÉΓòÉ 35. Help Help ΓòÉΓòÉΓòÉ
This menu is used to access specific help topics.
Index
This displays a panel listing all the topics available in the helps for the
Font Editor. General help
This displays a panel describing the general usage of the Font Editor.
Using help
This displays a panel describing how to use the help facility.
Keys
This displays a panel listing the use of keys specially recognized by the Font
Editor.
ΓòÉΓòÉΓòÉ 36. Font Editor ΓòÉΓòÉΓòÉ
The Font Editor is used to modify raster fonts, typically so that an
application may display information, either visual or textual, in a special
way. Such fonts may be used to construct images using characters designed to
form lines, circles and other geometric shapes. It may also be desirable to add
or delete spacing, add serifs, create italic or bold styles, etc.
The Font Editor consists of four panels or displays, plus several dialogs used
to control major features of a font. A mouse is required to use the Font
Editor, as no keyboard interface for selection and editing exists.
The first window is an exploded view of the currently selected character. This
window allows the user to modify the character's rasters with the mouse.
The second area is located at the bottom of the Font Editor's main window. this
is a list of characters (displayed in numerical order) and a scroll bar. The
scroll bar is used to move higher or lower in numerical order. About 50
characters are normally displayed. To display a character in the edit-window,
select the desired character by clicking on it.
The third area is near the top, just to the right of the exploded view. This
area displays the character currently being edited between two representative
characters (usually O and H). This allows the user to determine whether
additional space is needed to one side or the other. It also allows the user to
ensure that the serifs on script fonts match between one character and another.
The last area is just below the third, to the right of the exploded view. This
area displays the numerical value (Codepoint), width (Increment) and height
(Row) of the currently selected character.
ΓòÉΓòÉΓòÉ 37. General Help ΓòÉΓòÉΓòÉ
This menu is used to access the General help panel for the Font Editor.
ΓòÉΓòÉΓòÉ 38. Keys Help ΓòÉΓòÉΓòÉ
This menu is used to access the Keys help panel for the Font Editor.
ΓòÉΓòÉΓòÉ 39. Help Index ΓòÉΓòÉΓòÉ
This menu is used to access the Index help panel for the Font Editor.
ΓòÉΓòÉΓòÉ 40. Using help ΓòÉΓòÉΓòÉ
This menu is used to access the Using help panel for the Font Editor.
ΓòÉΓòÉΓòÉ <hidden> Help for Open ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Open ΓòÉΓòÉΓòÉ
1. Select the down arrow to the right of the Drive list to display all the
drives on your system.
2. Select a drive from the Drive list.
3. Select a directory from the Directory list.
4. Select a file name from the File list or type in a file name and select
the Open pushbutton to display the file you want to load.
For specific help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> List of Fields ΓòÉΓòÉΓòÉ
File name Type of file
Drive File
Directory Open pushbutton
ΓòÉΓòÉΓòÉ <hidden> Help for File name ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for File name ΓòÉΓòÉΓòÉ
Type the name of the file you want to open in the File name field and select
the Open pushbutton.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> List of Fields ΓòÉΓòÉΓòÉ
File name Type of file
Drive File
Directory Open pushbutton
General help
ΓòÉΓòÉΓòÉ <hidden> Help for Type of file ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Type of file ΓòÉΓòÉΓòÉ
Select the down arrow to the right of the Type of file field to display the
available file types. The Font Editor has set this field for all file types.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for Drive ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Drive ΓòÉΓòÉΓòÉ
The Drive list displays the drives on your system. Select the drive that
contains the file you want to load.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for File ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for File ΓòÉΓòÉΓòÉ
The File list displays all the files in the directory you selected from the
Directory list. Select the file you want to open.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for Directory ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Directory ΓòÉΓòÉΓòÉ
The Directory list displays the directories on the selected drive. Select a
directory to display the list of files from that directory in the File list
box.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for Open ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Open ΓòÉΓòÉΓòÉ
Select the Open pushbutton to display the file you want to load.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for Save ΓòÉΓòÉΓòÉ
Use Save to store the file you are editing. After the file is saved, the text
remains in the window so that you can continue editing it.
Note: If you are editing a new file, select the Save or Save as choices to
display the Save as pop-up so that you can name the file you are
editing. A file must have a title to be saved.
ΓòÉΓòÉΓòÉ <hidden> Help for Save as ΓòÉΓòÉΓòÉ
Use Save as to name and save a new file or to save an existing file under a
different name, in a different directory, or on a different disk.
ΓòÉΓòÉΓòÉ <hidden> Help for Save as ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Save as ΓòÉΓòÉΓòÉ
1. Select the down arrow to the right of the Drive list to display all the
drives on your system.
2. Select a drive from the Drive list.
3. Select a directory from the Directory list.
4. Type the name of the file you want to save in the File name field and
select the Save pushbutton.
For specific help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> List of Fields ΓòÉΓòÉΓòÉ
File name Type of file
Drive File
Directory Save pushbutton
ΓòÉΓòÉΓòÉ <hidden> Help for File name ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for File name ΓòÉΓòÉΓòÉ
Type the name of the file you want to save in the File name field and select
the Save pushbutton.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> List of Fields ΓòÉΓòÉΓòÉ
File name Type of file
Drive File
Directory Save pushbutton
General help
ΓòÉΓòÉΓòÉ <hidden> Help for Type of file ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Type of file ΓòÉΓòÉΓòÉ
Select the down arrow to the right of the Type of file field to display the
available file types. The Font Editor has set this field for all file types.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for Drive ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Drive ΓòÉΓòÉΓòÉ
The Drive list displays the drives on your system. Select the drive that
contains the files you want to save.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for File ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for File ΓòÉΓòÉΓòÉ
The File list displays all the files in the directory you selected from the
Directory list. Select the file you want to rename and save.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for Directory ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Directory ΓòÉΓòÉΓòÉ
The Directory list displays the directories on the selected drive. Select a
directory to display the list of files from that directory in the File list
box.
For more help, select a topic below.
ΓòÉΓòÉΓòÉ <hidden> Help for Save ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ <hidden> Help for Save ΓòÉΓòÉΓòÉ
Select the Save pushbutton to save the file to the drive and directory you
selected and with the file name you specified.
For more help, select a topic below.