home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 2 BBS
/
02-BBS.zip
/
bos2_xr5.zip
/
common
/
language.txt
< prev
next >
Wrap
Text File
|
1997-06-09
|
75KB
|
1,948 lines
;--------------------------------------------------------------------------;
; ;
; ;
; ------------ Bit-Bucket Software, Co. ;
; \ 10001101 / Writers and Distributors of ;
; \ 011110 / Freely Available<tm> Software. ;
; \ 1011 / ;
; ------ ;
; ;
; (C) Copyright 1987-96, Bit Bucket Software Co. ;
; ;
; ;
; *: common entries ;
; E: English language text by Bit-Bucket Software ;
; S: StarTrek language text by George Vandervort, 1:382/8 ;
; G: German language text by Udo Heinrich, 2:2452/264 ;
; ;
; Mixed together into language.txt by Th. Waldmann 2:2474/400 ;
; ;
; For complete details of the licensing restrictions, please refer ;
; to the License agreement, which is published in its entirety in ;
; the MAKEFILE and BT.C, and also contained in the file LICENSE.260. ;
; ;
; USE OF THIS FILE IS SUBJECT TO THE RESTRICTIONS CONTAINED IN THE ;
; BINKLEYTERM LICENSING AGREEMENT. IF YOU DO NOT FIND THE TEXT OF ;
; THIS AGREEMENT IN ANY OF THE AFOREMENTIONED FILES, OR IF YOU DO ;
; NOT HAVE THESE FILES, YOU SHOULD IMMEDIATELY CONTACT BIT BUCKET ;
; SOFTWARE CO. AT ONE OF THE ADDRESSES LISTED BELOW. IN NO EVENT ;
; SHOULD YOU PROCEED TO USE THIS FILE WITHOUT HAVING ACCEPTED THE ;
; TERMS OF THE BINKLEYTERM LICENSING AGREEMENT, OR SUCH OTHER ;
; AGREEMENT AS YOU ARE ABLE TO REACH WITH BIT BUCKET SOFTWARE, CO. ;
; ;
; ;
; You can contact Bit Bucket Software Co. at any one of the following ;
; addresses: ;
; ;
; Bit Bucket Software Co. FidoNet 1:104/501, 1:343/491 ;
; P.O. Box 460398 AlterNet 7:491/0 ;
; Aurora, CO 80046 Internet f491.n343.z1.fidonet.org ;
; ;
; Please feel free to contact us at any time to share your comments about ;
; our software and/or licensing policies. ;
;--------------------------------------------------------------------------;
;
; We really should tell you what these all correspond to, but since
; release is imminent, we don't have the time. In general, if there
; is a single trailing space, it is significant. If there are
; multiple trailing spaces, then that field can be no longer than the
; current line length.
;
; All lines starting with ';' are comments
; Comments may be put on any individual line using ';' as leftmost character
;
; Compiler converts '\n' and '\r' for you.
; Use '\b' for trailing blanks!
;
; You can use #??? for the message numbers before 'L' or '?'.
; They are ignored by the compiler.
;
; The following line contains the record count and version number
; Record count should be exactly the same as X_TOTAL_MSGS in MSGS.H !!
;
*L576 1
;
; Start of message text below
;
E#000L:Dialing %s with script '%s'.
S#000L:Dialing %s with script '%s'.
G#000L:Waehle %s mit Script '%s'.
E#001L!Could not open script %s.
S#001L!Could not open script %s.
G#001L!Kann Script nicht oeffnen: %s
E#002L+Master script timer expired.
S#002L+Master script timer expired, Captain.
G#002L+Hauptscript: Zeit abgelaufen.
E#003L+Script '%s' failed at line %d.
S#003L+Script '%s' failed at line %d.
G#003L+Script '%s': Fehler in Zeile %d.
E#004LMemFree:
S#004LMemFree:
G#004LRAMFrei:
E#005L!Too many labels in script.
S#005L!Too many labels in script.
G#005L!Zu viele Sprungmarken in Script.
E#006LMacro number
S#006LMacro number
G#006LMakro Nummer
E#007Lis out of range 1-9.
S#007Lis out of range 1-9.
G#007Lnicht innerhalb 1-9.
E#008LShell number
S#008LShell number
G#008LShell Nummer
E#009Lenough
S#009Lenough
G#009Lgenug
E#010LRequests Allowed.
S#010LRequests Allowed, Captain!
G#010LRequests erlaubt.
E#011LLogLevel must be 0..7 or -1..-7 - %s is unknown.\n
S#011LLogLevel must be 0..7 or -1..-7 - %s is unknown.\n
G#011LLogLevel muss 0..7 oder -1..-7 sein - %s is unbekannt.\n
E#012LRidiculous MAXport value: %s\n
S#012LRidiculous MAXport value: %s\n
G#012LLaecherlicher MAXport-Wert: %s\n
E#013LIllegal port: %s\n
S#013LIllegal port: %s\n
G#013LUngueltiger Port: %s\n
E#014LIllegal CARRIER mask: %s\n
S#014LIllegal CARRIER mask: %s\n
G#014LUngueltige CARRIER-Maske: %s\n
;
; The following both lines represent parts of the "screenblank" statement
; One can write "screenblank", or "screenblank key" or "screenblank call".
; Please do not change them.
;
*#015Lkey
*#016Lcall
;
E#017LERR: Unknown or illegal config line:\n'%s'\n
S#017LERR: Unknown or illegal config line:\n'%s'\n
G#017LERR: Unbekannte oder ungueltige Config-Zeile:\n'%s'\n
E#018L!Invalid environment var value: %s=%s
S#018L!Invalid environment var value: %s=%s
G#018L!Ungueltiger Wert von Environment-Variable: %s=%s
E#019L!Out of memory - outbound caching disabled.
S#019L!Out of memory - outbound caching disabled.
G#019L!Kein Speicher mehr frei - Outbound-Caching deshalb ausgeschaltet.
E#020L\rPress <Escape> to enter BBS.\r
S#020L\rPress <Escape> to enter BBS, Mr. Data.\r
G#020L\rDruecke <Escape> um die Mailbox zu starten.\r
E#021L\r\rProcessing Mail. Please hang up.\r\r
S#021L\r\rProcessing Mail. Please hang up NOW.\r\r
G#021L\r\rMomentan wird nur Mail bearbeitet. Bitte lege auf.\r\r
E#022L+Nothing to send to %s.
S#022L+Nothing to send to %s.
G#022L+Nichts zu senden an %s.
E#023L!Connection attempt aborted.
S#023L!Connection attempt aborted, Sir.
G#023L!Anwahlversuch abgebrochen.
E#024L#Modem hang up sequence initiated.
S#024L#Modem hang up sequence initiated, Sir.
G#024L#Modem legt auf.
E#025L:No outgoing file requests.
S#025L:No outgoing file requests, Captain Picard.
G#025L:Kein ausgehender Filerequest.
E#026L:Outbound file requests.
S#026L:Outbound file requests, Sir.
G#026L:Ausgehender Filerequest.
E#027L:End of outbound file requests.
S#027L:End of outbound file requests, Capt... She canna take anymorrre!
G#027L:Ausgehender Filerequest beendet.
E#028L*Remote doesn't allow File Requests now.
S#028L*Remote doesn't allow File Requests now, Mr. Spock, Jump to Warp8!
G#028L*Gegenseite hat Filerequests abgelehnt.
E#029L\r\r+ Address %s using %s %s\r\n
S#029L\r\r+ Address %s using %s %s\r\n
G#029L\r\r+ Adresse %s benutzt %s %s\r\n
*#030LIntro :
E#031L!`brightred`Remote didn't respond.
S#031L!`brightred`Remote didn't respond, Hard to port, Sulu!
G#031L!`brightred`Gegenseite meldet sich nicht.
E#032L*`brightred`Lost Carrier.
S#032L*`brightred`Lost Carrier in Black Hole, Sir.
G#032L*`brightred`Traegersignal verloren.
E#033L*Password-protected session.
S#033L*Password-protected session, Sir.
G#033L*Passwort-geschuetzte Verbindung.
E#034L!`brightred`Password Error from %s: His='%s' Ours='%s'
S#034L!`brightred`Password Error from %s: His='%s' Ours='%s'
G#034L!`brightred`Passwort-Fehler von %s: Sein PW='%s' Unser PW='%s'
E#035L!Called %s and got %s.
S#035L!Called %s and got %s.
G#035L!Angerufen bei %s und bekam %s.
E#036L:Session method:
S#036L:Session method:
G#036L:Verbindungmethode:
E#037L*End of WaZOO/EMSI Session.
S#037L*End of WaZOO/EMSI Session, Capt., mission complete, Sir!
G#037L*Ende der WaZOO/EMSI-Verbindung.
E#038L Sending Mail Packet.
S#038L Sending Mail Packet NOW!
G#038L Sende Nachrichtenpaket.
E#039LOpen
S#039LOpen
G#039Loeffnen
E#040L Keyboard Escape.
S#040L Keyboard Escape.
G#040L Tastatur-Abbruch.
E#041L File %s truncated.
S#041L File %s truncated.
G#041L File %s auf 0 Byte gesetzt.
E#042L+Dupe file renamed: %s
S#042L+Dupe file renamed: %s
G#042L+Doppelte Datei umbenannt: %s
E#043L Open Character Device
S#043L Open Character Device
G#043L Keine Datei, sondern ein Gerät
E#044L `brightred`Too many errors.
S#044L `brightred`Too many errors, I think the Dilithium Crystals are damaged, Sir!
G#044L `brightred`Zu viele Fehler.
E#045L File %s deleted.
S#045L File %s deleted.
G#045L Datei %s geloescht.
E#046L `brightred`Transfer cancelled.
S#046L `brightred`Transfer cancelled, Scotty, get us out of here!
G#046L `brightred`Transfer abgebrochen.
E#047L!Couldn't open CTL file: %s
S#047L!Couldn't open CTL file: %s
G#047L!Konnte CTL-File nicht oeffnen: %s
E#048LDarn! The FOSSIL seems to have gone away! Exiting.
S#048LDarn! The FOSSIL seems to have gone away! Exiting.
G#048LDer FOSSIL-Treiber ist nicht mehr geladen! Breche ab.
E#049LCannot re-open logfile.
S#049LCannot re-open logfile, Sir!
G#049LKann LOG-Datei nicht wieder oeffnen.
E#050L FOSSIL:
S#050L FOSSIL:
G#050L FOSSIL:
*#051Lunused
E#052L:Starting Event %d (%s).
S#052L:Starting Event %d (%s), Captain.
G#052L:Starte Event %d (%s).
E#053L#Exit at start of event with errorlevel %d.
S#053L#Exit at start of event with errorlevel %d, Sir!
G#053L#Exit zu Beginn des Events mit Errorlevel %d.
E#054L#Running clean/pack sequence.
S#054L#Running clean/pack sequence, Sir!
G#054L#Starte Aufraeum/Pack-Sequenz.
E#055L#System re-enabled after clean/pack sequence.
S#055L#System re-enabled after clean/pack sequence, Sir!
G#055L#Zurueck nach Aufraeum/Pack-Sequenz.
E#056L!Date rollover problem?
S#056L!Date rollover problem? Fix it! Mr. Data!
G#056L!Irgendwas stimmt mit dem Datum nicht?
E#057L:Exiting to BBS with errorlevel %u.
S#057L:Exiting to BBS with errorlevel %u, Captain!
G#057L:Starte Mailbox mit Errorlevel %u.
E#058L:Spawning BBS.
S#058L:Spawning BBS now, Captain.
G#058L:Starte Mailbox.
E#059L:Returned from BBS.
S#059L:Returned from BBS, watch the ComPort, Mr. Data!
G#059L:Rueckkehr von der Mailbox.
E#060L:Exiting to external mailer with errorlevel %u.
S#060L:Exiting to external mailer with errorlevel %u, Chekov.
G#060L:Exit zu externem Mailer mit Errorlevel %u.
E#061L#Setting baud to %u.
S#061L#Setting baud to %u, Sir!
G#061L#Setze Baudrate auf %u.
E#062L*Uses :
S#062L*Uses :
G#062L*Nutzt :
*#063LVersion
*#064Lunused
E#065L*Sending mail using FTS-0001 compatible fallback.
S#065L*Sending mail using FTS-0001 compatible fallback.
G#065L*Sende Nachrichten mittels FTS-0001 Grundprotokoll.
E#066L*Refusing inbound file requests.
S#066L*Refusing inbound file requests, Sir!
G#066L*Lehne eingehende Filerequests ab.
E#067L!Tired of waiting for other end.
S#067L!Tired of waiting for other end... LAUNCH PHOTON TORPEDOS!
G#067L!Andere Seite meldet sich nicht. Passwortfehler?
E#068L*End of FTS-0001 compatible session.
S#068L*End of FTS-0001 compatible session, Sir.
G#068L*Ende der FTS-0001 Verbindung.
E#069L*Receiving mail using FTS-0001 compatible fallback.
S#069L*Receiving mail using FTS-0001 compatible fallback.
G#069L*Empfange Nachrichten mittels FTS-0001 Grundprotokoll.
E#070L*Giving mail to %s.
S#070L*Giving mail to %s.
G#070L*Uebergebe Nachrichten an %s.
E#071L*Node %s refused to pickup mail.
S#071L*Node %s refused to pickup mail. Target his Hard Drives, Mr. Worf.. Fire!
G#071L*Node %s nimmt seine Mail nicht an.
E#072L!Memory overflow error.
S#072L!Memory overflow error, Fix it Mr. Data!
G#072L!FEHLER: kein Speicher mehr.
E#073LOutbound
S#073LOutbound
G#073LAbgehende
E#074LFile Attaches
S#074LFile Attaches
G#074LDateien
E#075L*Making file request.
S#075L*Making file request, from Klingon Battle Cruiser, Sir.
G#075L*Mache Filerequest.
E#076LEnd of
S#076LEnd of
G#076LEnde des
E#077L*Receiving inbound mail.
S#077L*Receiving inbound mail, Captain.
G#077L*Empfange Nachricht.
E#078L*Pickup is turned off - refusing mail.
S#078L*Pickup is turned off - refusing mail as ordered Sir.
G#078L*Nachrichtenannahme gesperrt - verweigere Annahme von Nachrichten.
E#079LInbound
S#079LInbound
G#079LAnkommendes
E#080LMail Packet
S#080LMail Packet
G#080LNachrichtenpaket
E#081L!Password Error assumed.
S#081L!Password Error assumed.
G#081L!Vermutlich Passwortfehler.
E#082L!Mail Packet '%s' cannot be renamed.
S#082L!Mail Packet '%s' cannot be renamed.
G#082L!Nachrichtenpaket '%s' kann nicht umbenannt werden.
E#083L!Mail Packet renamed to '%s'.
S#083L!Mail Packet renamed to '%s'.
G#083L!Nachrichtenpaket umbenannt in '%s'.
E#084LCan't find protocol module:
S#084LCan't find protocol module:
G#084LKann Protokollmodul nicht finden:
E#085LDuplicate protocol name:
S#085LDuplicate protocol name:
G#085LDoppelter Protokollname:
E#086L*Processing node %s (%s)
S#086L*Processing node %s (%s)
G#086L*Bearbeite Node %s (%s)
E#087L!Couldn't find Address: %s
S#087L!Couldn't find Address: %s
G#087L!Kann Adresse %s nicht finden!
E#088L!Disconnecting nuisance caller.
S#088L!Disconnecting Nuisance Caller, Worf...KAPLAHH!
G#088L!Plagegeist rausgeworfen.
E#089L!No BOSS in the nodelist.
S#089L!No BOSS in the Nodelist, Sir.
G#089L!Kein BOSS in der Nodeliste.
E#090L!Unable to open %s.
S#090L!Unable to open %s.
G#090L!Kann %s nicht oeffnen.
E#091L!Unable to allocate memory for Nodelist Index.
S#091L!Unable to allocate memory for Nodelist Index, Scotty to the Bridge!
G#091L!Nicht genug Speicher fuer den Nodelisten-Index.
E#092L!Read error in %s.%s.
S#092L!Read error in %s.%s.
G#092L!Lesefehler in %s.%s
E#093L!Seek error in %s.%s.
S#093L!Seek error in %s.%s.
G#093L!Positionierfehler in %s.%s.
*#094Lunused94
E#095LFile Requests
S#095LFile Requests
G#095LFilerequests
E#096L:%d matching files sent.
S#096L:%d matching Files sent, Sir!
G#096L:%d uebereinstimmende Dateien gesendet.
E#097L!Bad Bark Request Data - streaming garbage.
S#097L!Bad Bark Request Data - streaming Garbage, Sir.
G#097L!Schlechte Bark-Request-Daten - ueberspringe Muell.
E#098L!Bad CRC - trying again.
S#098L!Bad CRC - trying again, Try another frequency Uhura!
G#098L!Falsche CRC - wiederhole.
E#099L!System misconfigured or no entry in Nodelist.
S#099L!System misconfigured or no entry in Nodelist, Mr. Data!
G#099L!System fehlconfiguriert oder kein Eintrag in der Nodeliste.
E#100L!Invalid online time flag: %s
S#100L!Invalid online time flag: %s
G#100L!Ungueltiges Online-Zeit-Flag: %s
E#101L:NO DIALTONE, dial aborted.
S#101L:NO DIALTONE, dial aborted, Sir.
G#101L:NO DIALTONE, ankommender Anruf? Anwahl abgebrochen.
E#102LDynamic Event
S#102LDynamic Event
G#102LDynamischen Events
E#103L:Exit requested from keyboard.
S#103L:Exit requested from keyboard, Captain, Slowing to sub-light speed.
G#103L:Abbruch ueber Tastatur.
E#104L:Function key exit - errorlevel %d.
S#104L:Function key exit - errorlevel %d.
G#104L:Funktionstaste - Errorlevel %d.
E#105L Disabling Modem.
S#105L Disabling Modem, Captain.
G#105L Schalte Modem ab.
E#106L:Invoking Message Reader.
S#106L:Invoking Message Reader, Sir.
G#106L:Starte Nachrichtenleser.
E#107L:Message Reader returned to BinkleyTerm.
S#107L:Message Reader returned to BinkleyTerm, Sir.
G#107L:Von Nachrichtenleser zurueck in BinkleyTerm.
E#108L Enabling Modem.
S#108L Enabling Modem, Sir.
G#108L Modem wieder aktiviert.
E#109L!No Message Reader to invoke.
S#109L!No Message Reader to invoke! LaForge to the Bridge!
G#109L!Kein Nachrichtenleser konfiguriert.
E#110L!Could not do GET.
S#110L!Could not do GET.
G#110L!Kann GET nicht ausfuehren.
E#111L!Could not do KILL.
S#111L!Could not do KILL.
G#111L!Kann KILL nicht ausfuehren.
E#112L:Entering POLL Mode.
S#112L:Entering POLL Mode.
G#112L:Starte POLL-Modus.
E#113L:Poll completed.
S#113L:Poll completed, Sir.
G#113L:Poll beendet.
E#114L!Could not do SEND.
S#114L!Could not do SEND StarFleet Mail!
G#114L!Kann SEND nicht ausfuehren.
E#115L:Keyboard request to enter terminal mode.
S#115L:Keyboard request to enter Terminal mode, Sir!
G#115L:Terminalmodus von Tastatur angefordert.
*#116Lunused
E#117L:Executing keyboard shell %d.
S#117L:Executing keyboard shell %d, ENGAGE!
G#117L:Fuehre Tastatur-Shell %d aus.
E#118L:Returning from keyboard shell.
S#118L:Returning from keyboard shell, Sir.
G#118L:Zurueck von Tastatur-Shell.
E#119L!No keyboard shell %d.
S#119L!No keyboard shell %d, Sir. Possible Ferengi Sabotage!
G#119L!Keine Tastatur-Shell %d.
E#120L>Junk character from keyboard - continuing.
S#120L>Ferengi pounding on keyboard, Sir.
G#120L>Unbekannte Taste - fahre fort.
E#121L:Shelling to Command Interpreter.
S#121L:Shelling to Command Interpreter, Sir.
G#121L:Shelle zum Kommando-Interpreter.
E#122L\r\nType EXIT to return to BinkleyTerm.\r\n
S#122L\r\nType EXIT to return to BinkleyTerm.\r\n
G#122L\r\nGebe EXIT ein, um zu Binkley zurueckzukehren.\r\n
E#123L:BinkleyTerm Reactivated.
S#123L:BinkleyTerm Reactivated... Data Notify StarFleet.
G#123L:BinkleyTerm wieder aktiv.
E#124L!Calls not permitted during this event.
S#124L!Calls not permitted during this event, Sir.
G#124L!Dieser Event erlaubt keine Anrufe.
E#125L Immediate call requested.
S#125L Immediate call requested, Jim! I'm a Doctor, not a Polling System!
G#125L Sofortiger Anruf verlangt.
E#126L\rPlease enter a net/node number:\b
S#126L\rPlease Enter a net/node number:\b
G#126L\rBitte gib eine Netz/Node-Nummer ein:\b
E#127LCurrently Polling Node\b
S#127LCurrently Polling Node\b
G#127LPolle gerade Node\b
*#128LInit
E#129LIdle
S#129LIdle
G#129LWarte
E#130LDialing
S#130LDialing
G#130LWaehle
E#131LHangUp
S#131LHangUp
G#131LLege auf
E#132LConnect
S#132LConnect
G#132LVerbunden
E#133L:Dialing %s (%s -- %s)
S#133L:Dialing %s (%s -- %s)
G#133L:Waehle %s (%s -- %s)
E#134LEnding time wraps through midnight - not allowed.\n
S#134LEnding time wraps through midnight - not allowed.\n
G#134LEndzeit geht ueber Mitternacht - nicht erlaubt.\n
E#135L'%s' has an invalid START-TIME.\n
S#135L'%s' has an invalid START-TIME.\n
G#135L'%s' hat ungueltige Startzeit.\n
E#136L'%s' has an invalid END-TIME.\n
S#136L'%s' has an invalid END-TIME.\n
G#136L'%s' hat ungueltige Endzeit.\n
E#137L'%s' has bad AvgWait (higher than max of 655 or less than min of 0).\n
S#137L'%s' has bad AvgWait (higher than max of 655 or less than min of 0).\n
G#137L'%s' hat ungueltige Anwahlpausenzeit (hoeher als 655 oder weniger als 0).\n
E#138L'%s' has a bad errorlevel code.\n
S#138L'%s' has a bad errorlevel code.\n
G#138L'%s' hat ungueltigen Errorlevel-Wert.\n
E#139L'%s' has a bad number of Tries.\n
S#139L'%s' has a bad number of Tries.\n
G#139L'%s' hat ungueltige Anzahl von Wahlversuchen.\n
E#140L'%s' has something indecipherable.\n
S#140L'%s' has something indecipherable.\n
G#140L'%s' hat etwas Unentzifferbares.\n
E#141L'%s' has an invalid DAY field.\n
S#141L'%s' has an invalid DAY field.\n
G#141L'%s' hat ungueltiges Tag-Feld.\n
E#142LNothing in Outbound Area
S#142LNothing in Outbound Area
G#142L-- Nichts im Outbound --
E#143LAddress Files Size Age State
S#143LAddress Files Size Age State
G#143LAdresse Anz. Groe Alt Status
E#144L!Insufficient data for session.
S#144L!Insufficient data for session.
G#144L!Daten reichen fuer Verbindung nicht aus.
E#145L+End of connection attempt.
S#145L+End of connection attempt, Scotty... More Power!
G#145L+Ende des Verbindungsversuchs.
E#146L!Still have mail for %s.
S#146L!Still have mail for %s, Sir.
G#146L!Habe immer noch Nachrichten fuer %s.
E#147L:Exit after compressed mail with errorlevel %d.
S#147L:Exit after compressed mail with errorlevel %d.
G#147L:Exit nach komprimierten Nachrichten mit Errorlevel %d.
E#148L:Exit after file extension '%s' with errorlevel %d.
S#148L:Exit after file extension '%s' with errorlevel %d.
G#148L:Exit nach File-Endung '%s' mit Errorlevel %d.
E#149L:Exit after receiving mail with errorlevel %d.
S#149L:Exit after receiving mail with errorlevel %d.
G#149L:Exit nach empfangenen Nachrichten mit Errorlevel %d.
E#150L:Received mail, running 'AfterMail' program.
S#150L:Received mail, running 'AfterMail' program.
G#150L:Eingegangene Nachrichten, starte 'AfterMail'-Programm.
E#151L#Re-enabling system following 'AfterMail' program.
S#151L#Re-enabling system following 'AfterMail' program.
G#151L#Reaktiviere System nach 'AfterMail'-Programm.
E#152LSetting
S#152LSetting
G#152LSetze
E#153L to initial speed of\b
S#153L to initial speed of\b
G#153L auf anfaengliche Geschwindigkeit von\b
E#154L baud. Press Alt-F10 for HELP.\r\n
S#154L baud. Press Alt-F10 for HELP.\r\n
G#154L Baud. Druecke Alt-F10 fuer HILFE.\r\n
*#155Lunused
E#156LCurrent Settings
S#156LCurrent Settings
G#156LEinstellungen
E#157LToday at a Glance
S#157LToday at a Glance
G#157LTagesueberblick
E#158LPending Outbound Mail
S#158LOutbound Mail to StarFleet
G#158LAusgangsfach
E#159LInitializing System
S#159LInitializing System
G#159LInitialisierung
E#160LRecent Activity
S#160LCaptain's Personal Log
G#160LLetzte Aktivitaeten
E#161LStatus
S#161LStarFleet Status
G#161LStatus
*#162LEvent:
*#163LPort:
*#164LStatus: Init
*#165LIn M/B/F: %9s
*#166LOut:%15s
*#167LRx #/Vol.:%9s
*#168LTx #/Vol.:%9s
*#169LLast:%14s
E#170L Hit Alt-F10 For Help
S#170L Hit Alt-F10 For Help
G#170L Alt-F10 fuer Hilfe
*#171L[%02x] Node: %s
E#172L!Password override for outgoing call.
S#172L!Password override for outgoing call.
G#172L!Passwortfehler ignoriert fuer ausgehenden Anruf.
E#173L\r**Zmodem Autodownload initiated.\r\n
S#173L\r**Zmodem Autodownload initiated.\r\n
G#173L\r**Zmodem Autodownload begonnen.\r\n
E#174L\r**Zmodem Autodownload finished.\r\n
S#174L\r**Zmodem Autodownload finished.\r\n
G#174L\r**Zmodem Autodownload beendet.\r\n
E#175L\r\nBinkleyTerm now communicating at\b
S#175L\r\nBinkleyTerm now communicating at\b
G#175L\r\nBinkleyTerm arbeitet nun mit\b
E#176L\r\nPlease Enter a Phone (or net/node) number:\b
S#176L\r\nPlease Enter a Phone (or net/node) number:\b
G#176L\r\nBitte gebe Telefon- oder Nodenummer an:\b
E#177L\r\nUnable to force carrier drop by dropping DTR!\r\n
S#177L\r\nUnable to force carrier drop by dropping DTR!\r\n
G#177L\r\nKann Traegersignal nicht unterdruecken!\r\n
E#178L\r\nWelcome back!\r\n
S#178L\r\nWelcome back, Captain, I didn't think you'd make it!\r\n
G#178L\r\nWillkommen zurueck!\r\n
E#179L\r\nLog file name:\b
S#179L\r\nLog file name:\b
G#179L\r\nLogdatei-Name:\b
*#180Lunused
E#181LBinkleyTerm now in MANUAL mode.\r\n
S#181LBinkleyTerm now in MANUAL mode.\r\n
G#181LBinkleyTerm ist jetzt im manuellen Modus.\r\n
E#182L\r\nBinkleyTerm now using
S#182L\r\nBinkleyTerm now using
G#182L\r\nBinkleyTerm benutzt jetzt
E#183L\r\nBinkleyTerm is ready to SEND a file...\r\n
S#183L\r\nBinkleyTerm is ready to SEND a file...\r\n
G#183L\r\nBinkleyTerm ist bereit das File zu versenden...\r\n
E#184LWhich Protocol do you want BinkleyTerm to use?\r\n
S#184LWhich Protocol do you want BinkleyTerm to use?\r\n
G#184LWelches Protokoll soll BinkleyTerm benutzen?\r\n
E#185L\r\nBinkleyTerm is ready to RECEIVE a file...\r\n
S#185L\r\nBinkleyTerm is ready to RECEIVE a file...\r\n
G#185L\r\nBinkleyTerm ist bereit eine Datei zu empfangen...\r\n
E#186L\r\nSending BREAK signal.\r\n
S#186L\r\nSending BREAK signal.\r\n
G#186L\r\nSende BREAK Signal.\r\n
E#187LDone.\r\n
S#187LDone.\r\n
G#187LFertig.\r\n
E#188L\r\nYou are using\b
S#188L\r\nYou are using\b
G#188L\r\nDu benutzt\b
E#189LSorry. I don't know that protocol, returning to terminal mode.\r\n
S#189LSorry. I don't know that protocol, returning to terminal mode.\r\n
G#189LDieses Protokoll ist nicht bekannt, zurueck ins Terminal.\r\n
E#190LFilename to SEND:\b
S#190LFilename to SEND:\b
G#190LDateiname zum Senden:\b
E#191LOK....Choose!\b
S#191LOK....Choose!\b
G#191LOK....Waehle!\b
E#192LFilename to GET:\b
S#192LFilename to GET:\b
G#192LDateiname zum Holen:\b
E#193L\r\nLogfile %s closed.\r\n
S#193L\r\nLogfile %s closed.\r\n
G#193L\r\nLogdatei %s geschlossen.\r\n
E#194L\r\nCould not open logfile %s.\r\n
S#194L\r\nCould not open logfile %s.\r\n
G#194L\r\nKann Logdatei %s nicht oeffnen.\r\n
E#195L\r\nLogfile %s open.\r\n
S#195L\r\nLogfile %s open.\r\n
G#195L\r\nLogdatei %s offen.\r\n
E#196L:Connection terminated.
S#196L:Connection terminated.
G#196L:Verbindung beendet.
E#197LSwitching back to
S#197LSwitching back to
G#197LSchalte zurueck auf
E#198LPolling:
S#198LPolling:
G#198LPolle:
E#199LGET a File
S#199LGET a File
G#199LGET - Hole eine Datei
E#200LAddress to GET from:
S#200LAddress to GET from:
G#200LVon welcher Adresse:
E#201LPassword to use:
S#201LPassword to use:
G#201LWelches Passwort:
E#202LAre you sure (Y/N)?
S#202LAre you sure, Mr. Data (Y/N)?
G#202LSind Sie sicher (J/N)?
E#203LYes
S#203LYes
G#203LJa
E#204LNo
S#204LNo
G#204LNein
E#205LSEND a File
S#205LSEND a File
G#205LSEND - Eine Datei versenden
E#206LAddress to SEND to:
S#206LAddress to SEND to:
G#206LAn welche Adresse:
E#207LKILL outbound mail
S#207LKILL outbound mail
G#207LKILL - Loeschen ausgehender Nachrichten
E#208LAddress to KILL:
S#208LAddress to KILL:
G#208LAdresse eingeben:
E#209LKill ALL mail?\b
S#209LKill ALL mail?\b
G#209LALLE Nachrichten loeschen?\b
E#210L!drats
S#210L!SHIT, SHIT... FIRE PHAZERS NOW!!!
G#210L!drats
E#211L!No Send - Remote Hung Up.
S#211L!No Send - Remote Hung Up.
G#211L!Nichts gesendet - Gegenstelle hat aufgehaengt.
E#212L+Corrected %d errors in %ld blocks.
S#212L+Corrected %d errors in %ld blocks.
G#212L+Korrigierte %d Fehler in %ld Bloecken.
*#213L+Sent
E#214L+`brightred`Synchronizing to Offset %ld.
S#214L+`brightred`Synchronizing to Offset %ld.
G#214L+`brightred`Synchronisiere auf Position %ld.
E#215L!Temporary receive file '%s' could not be opened.
S#215L!Temporary receive file '%s' could not be opened.
G#215L!Temporaere Empfangsdatei '%s' kann nicht erstellt werden.
E#216L+Already have %s.
S#216L+Already have %s, Captain.
G#216L+%s ist schon vorhanden.
E#217L+Synchronizing to End of File.
S#217L+Synchronizing to End of File.
G#217L+Synchronisiere auf Dateiende.
*#218L!unused
E#219L+Received
S#219L+Received
G#219L+Received
E#220L!Original name of %s could not be used.
S#220L!Original name of %s could not be used.
G#220L!Originalname %s kann nicht benutzt werden.
E#221L!EOT not expected until block %ld.
S#221L!EOT not expected until block %ld.
G#221L!EOT nicht erwartet bis Block %ld.
E#222L*Remote System
S#222L*Remote System
G#222L*Gegenseite
E#223LUNKNOWN - FTS-0001 Mailer.
S#223LUNKNOWN - FTS-0001 Mailer.
G#223LUnbekannt - FTS-0001-Mailer.
E#224LSystem Initializing. Please wait...\n
S#224LSystem Initializing, Captain... Please wait...\n
G#224LInitialisierung. Bitte warten...\n
E#225L\r\nUnrecognized option: %s\r\n
S#225L\r\nUnrecognized option: %s\r\n
G#225L\r\nWas bedeutet '%s'?\r\n
E#226L\r\nThanks for using %s,\r\n
S#226L\r\nThanks for using %s,\r\n
G#226L\r\nDanke fuer die Benutzung von %s,\r\n
E#227LAnother fine User-DEVELOPED software package!\r\n
S#227LAnother fine User-DEVELOPED software package!\r\n
G#227LEin Softwarepaket, von Anwendern entwickelt!\r\n
E#228L+Remote refused %s.
S#228L+Remote refused %s.
G#228L+Gegenstelle hat %s abgelehnt.
E#229L!`brightred`Error
S#229L!`brightred`Error
G#229L!`brightred`Fehler
E#230LCan't
S#230LCan't
G#230LKann nicht
E#231L+CPS: %lu (%lu bytes) Efficiency: %lu%%%
S#231L+CPS: %lu (%lu bytes) Efficiency: %lu%%%
G#231L+CPS: %lu (%lu Bytes) Effektivitaet: %lu%%%
E#232LCompressed Mail
S#232LCompressed Mail
G#232LGepackte Nachrichten
E#233LNet File
S#233LNet File
G#233LDatei
*#234Lunused
E#235L`brightred`Trouble?
S#235L`brightred`Trouble?
G#235L`brightred`Probleme?
E#236L`brightred`Resending from %d.
S#236L`brightred`Resending from %d.
G#236L`brightred`Wiederhole ab %d.
E#237LSend %ld blks of %s (%ld bytes).
S#237LSend %ld blks of %s (%ld bytes).
G#237LSende %ld Bloecke von %s (%ld Bytes).
E#238LUpdate
S#238LUpdate
G#238LUpdate
E#239LFile
S#239LFile
G#239LDatei
E#240LRequest
S#240LRequest
G#240LRequest
E#241L:Executing
S#241L:Executing
G#241L:Fuehre aus
E#242L!Carrier lost, request(s) aborted.
S#242L!Carrier lost, request(s) aborted.
G#242L!Traegersignal verloren, Request(s) abgebrochen.
E#243L!File Request limit exceeded.
S#243L!File Request limit exceeded.
G#243L!Filerequest-Begrenzung ueberschritten.
E#244L!Event Overrun - requests aborted.
S#244L!Event Overrun - requests aborted.
G#244L!Event ueberschritten - Requests abgebrochen.
E#245LNo AVAIL list.
S#245LNo AVAIL list, Contact StarFleet!
G#245LKeine AVAIL-Liste.
E#246LNo ABOUT or template file
S#246LNo ABOUT or template file, Contact StarFleet!
G#246LKein ABOUT- oder Templatefile.
E#247L!`brightred`OKFILE Error '%s'.
S#247L!`brightred`OKFILE Error '%s'.
G#247L!`brightred`OKFILE-Fehler '%s'.
E#248L!Request password error: '%s' '%s' '%s'
S#248L!Request password error: '%s' '%s' '%s'
G#248L!Request Passwort-Fehler: '%s' '%s' '%s'
E#249LRcv %ld blks of %s from %s (%ld bytes).
S#249LRcv %ld blks of %s from %s (%ld bytes).
G#249LEmpfange %ld Bloecke aus %s von %s (%ld Bytes).
E#250L`brightred`Timeout
S#250L`brightred`Timeout
G#250L`brightred`Zeit ueberschritten
E#251LChecksum
S#251LChecksum
G#251LPruefsumme
E#252L`brightred`CRC
S#252L`brightred`CRC
G#252L`brightred`CRC
E#253LJunk Block
S#253LJunk Block
G#253LSchlonz
E#254Lon block
S#254Lon block
G#254Lauf Block
E#255Lfind
S#255Lfind
G#255Lfinden
E#256LRead
S#256LRead
G#256LLese
E#257LSeek
S#257LSeek
G#257LSuche
*#258Lunused
*#259Lunused
*#260Lunused
E#261LWrite
S#261LWrite
G#261LSchreibe
E#262L SKIP command received.
S#262L SKIP command received... ENGAGE!
G#262L SKIP empfangen.
E#263LF1 ... F10 = input phone number, (ENTER) = start, (ESC) = abort\r\n
S#263LF1 ... F10 = input phone number, (ENTER) = start, (ESC) = abort\r\n
G#263LF1 ... F10 = Telefonnummer eingeben, (ENTER) = Starten, (ESC) = Abbruch\r\n
E#264LALT-Fn = load saved set (n), Shift-Fn = save into set (n)\r\n
S#264LALT-Fn = load saved set (n), Shift-Fn = save into set (n)\r\n
G#264LALT-Fn = Lade Einstellung (n), Shift-Fn = Speichere Einstellung (n)\r\n
E#265LUser set last loaded/saved: %d\r\n
S#265LUser set last loaded/saved: %d\r\n
G#265LLetzte Benutzereinstellung geladen/gespeichert: %d\r\n
E#266LPhone Numbers currently selected:\r\n\r\n
S#266LPhone Numbers currently selected:\r\n\r\n
G#266LAusgewaehlte Telefonnummern:\r\n\r\n
E#267L\r\nInput Command:\b
S#267L\r\nInput Command:\b
G#267L\r\nIhre Eingabe:\b
E#268LElement Chosen = %2d\r\n
S#268LElement Chosen = %2d\r\n
G#268LGewaehltes Element = %2d\r\n
E#269LCurrently contains %s\r\n
S#269LCurrently contains %s\r\n
G#269LAktueller Inhalt %s\r\n
E#270L(ENTER) = save, (space)(ENTER) = delete, or enter new number:\r\n
S#270L(ENTER) = save, (space)(ENTER) = delete, or enter new number:\r\n
G#270L(ENTER) = Speichern, (space)(ENTER) = Loeschen, oder Eingabe neuer Nummer:\r\n
E#271L(ENTER) or (space)(ENTER) = cancel, or enter new number:\r\n
S#271L(ENTER) or (space)(ENTER) = cancel, or enter new number:\r\n
G#271L(ENTER) oder (space)(ENTER) = Abbruch, oder Eingabe neuer Nummer:\r\n
E#272LError reading data from set %d.\r\n
S#272LError reading data from set %d.\r\n
G#272LFehler beim Lesen der Einstellung %d.\r\n
E#273LError closing file for set %d.\r\n
S#273LError closing file for set %d.\r\n
G#273LFehler beim Schliessen der Einstellung %d.\r\n
E#274LSet %d successfully loaded.\r\n
S#274LSet %d successfully loaded.\r\n
G#274LEinstellung %d erfolgreich geladen.\r\n
E#275LError writing data to set %d.\r\n
S#275LError writing data to set %d.\r\n
G#275LFehler beim Speichern der Einstellung %d.\r\n
E#276LCurrent list of numbers saved to set %d.\r\n
S#276LCurrent list of numbers saved to set %d.\r\n
G#276LAktuelle Telefonliste gespeichert in Einstellung %d.\r\n
E#277LPress ENTER to continue...
S#277LPress ENTER to Scan Planet Surface...
G#277LDruecke ENTER zum fortfahren...
E#278L#Starting Phone List Scan.
S#278L#Starting Phone List Scan.
G#278L#Starte Suche in Telefonliste.
E#279L#Connected to list element %d.
S#279L#Connected to list element %d.
G#279L#Verbunden mit Listenelement %d.
E#280LDebris
S#280LDebris
G#280LSchutt
E#281LLong pkt
S#281LLong pkt
G#281LLanges Pkt
E#282L!Ignoring '%s'.
S#282L!Ignoring '%s'.
G#282L!Ignoriere '%s'.
E#283L!Out of disk space.
S#283L!Out of disk space... Captain.
G#283L!Festplatte voll.
E#284LReceiving
S#284LReceiving
G#284LEmpfange
E#285L!Zmodem Init Problem %s.
S#285L!Zmodem Init Problem %s.
G#285L!Zmodem Init-Problem %s.
E#286Lbad position
S#286Lbad position
G#286LFalsche Position
E#287L!Zmodem Recv Problem %s.
S#287L!Zmodem Recv Problem %s.
G#287L!Zmodem Empfangsproblem %s.
E#288L!`brightred`Bad packet at %ld.
S#288L!`brightred`Bad packet at %ld.
G#288L!`brightred`Schlechtes Packet bei %ld.
*#289L!Offset=%ld Retries=%d
*#290L!Offset=%ld Retries=%d (SK: %d)
E#291L!`brightred`Other end died.
S#291L!`brightred`Other end died.
G#291L!`brightred`Andere Seite ist gestorben.
E#292L!Dropping to one-way xfer.
S#292L!Dropping to one-way xfer.
G#292L!Wechsle zu Transfer in jeweils nur einer Richtung.
E#293L+Refusing %s.
S#293L+Refusing %s.
G#293L+Lehne %s ab.
E#294L!Unknown packet type %d.
S#294L!Unknown packet type %d.
G#294L!Unbekannter Packet-Typ %d.
E#295L!`brightred`Session aborted.
S#295L!`brightred`Session aborted.
G#295L!`brightred`Verbindung abgebrochen.
E#296L#Sending %s.
S#296L#Sending %s.
G#296L#Sende %s.
E#297L!Can't decode file length.
S#297L!Can't decode file length.
G#297L!Kann Dateilaenge nicht herausfinden.
E#298L*Finished partial file %s.
S#298L*Finished partial file %s.
G#298L*Beende unvollstaendige Datei %s.
E#299L*Saving partial file %s.
S#299L*Saving partial file %s.
G#299L*Speichere unvollstaendige Datei %s.
E#300L*Remote can't handle file requests.
S#300L*Remote can't handle file requests.
G#300L*Gegenstelle kann keine Filerequests bearbeiten.
E#301LYou now have BinkleyTerm in DUMB TERMINAL mode.\r\n
S#301LYou now have BinkleyTerm in DUMB TERMINAL mode.\r\n
G#301LBinkleyTerm ist jetzt im TERMINAL-Modus.\r\n
;
; Help for dumb terminal.
;
E#302LIn DUMB TERMINAL mode the following special keys are enabled:\r\n\r\n
S#302LIn DUMB TERMINAL mode the following special keys are enabled:\r\n\r\n
G#302LIm TERMINAL-Modus gilt folgende Tastenbelegung:\r\n\r\n
E#303LAlt-B Cycle baud rate Alt-C Change communications parameters\r\n
S#303LAlt-B Cycle Warp Speed Rate Alt-C Change Communications parameters\r\n
G#303LAlt-B Wechsle Baudrate Alt-C Wechsle COM-Parameter\r\n
E#304LAlt-D Dial a system Alt-E Erase the current screen\r\n
S#304LAlt-D Dial a StarFleet System Alt-E Erase the Current Screen\r\n
G#304LAlt-D Waehle ein System an Alt-E Loesche aktuellen Bildschirm\r\n
E#305LAlt-H Hang up by dropping DTR Alt-I Initialize the modem\r\n
S#305LAlt-H Hang up by dropping DTR Alt-I Initialize the modem\r\n
G#305LAlt-H Auflegen mittels DTR-Low Alt-I Initialisiere das Modem\r\n
E#306LAlt-J Jump to Command Shell Alt-L Start/stop logging to a file\r\n
S#306LAlt-J Jump to Command Shell Alt-L Start/stop logging to a file\r\n
G#306LAlt-J Springe ins Betriebssystem Alt-L Start/Stop LOG-File benutzung\r\n
E#307LAlt-M Manually Poll a Node Alt-P Cycle Communications port\r\n
S#307LAlt-M Manually Poll a Node Alt-P Cycle Communications port\r\n
G#307LAlt-M Manueller Poll Alt-P Wechsle COM-Port\r\n
E#308LAlt-R Redial from a 'scan list' Alt-S Send BREAK signal to port\r\n
S#308LAlt-R Redial from a 'scan list' Alt-S Send BREAK signal to port\r\n
G#308LAlt-R Wähle mithilfe einer Liste Alt-S Sende BREAK Signal\r\n
E#309LAlt-U Go to UNATTENDED MAILER mode Alt-V Show BinkleyTerm version\r\n
S#309LAlt-U Go to UNATTENDED MAILER mode Alt-V Show BinkleyTerm version\r\n
G#309LAlt-U Zurueck zum MAILER Modus Alt-V Zeige BinkleyTerm Version\r\n
E#310LAlt-X Exit BinkleyTerm Alt-Y Call boss node for mail\r\n
S#310LAlt-X Exit BinkleyTerm NOW! Alt-Y Call Boss Node for Mail\r\n
G#310LAlt-X Beende BinkleyTerm Alt-Y Rufe Boss Node an\r\n
E#311LPgUp Send a file (UPLOAD) PgDn Receive a file (DOWNLOAD)\r\n
S#311LPgUp Send a file (UPLOAD) PgDn Receive a file (DOWNLOAD)\r\n
G#311LPgUp Datei senden (UPLOAD) PgDn Datei empfangen (DOWNLOAD)\r\n
E#312LAlt-F%-2d Macro string '%s'\r\n
S#312LAlt-F%-2d Macro string '%s'\r\n
G#312LAlt-F%-2d Makro-String '%s'\r\n
E#313L\r\nPress a key to continue...
S#313L\r\nPress a key to continue...
G#313L\r\nDruecke eine Taste zum Fortfahren...
;
; Help for unattended mailer.
;
E#314LIn UNATTENDED MAILER mode the following special keys are enabled:\r\n\r\n
S#314LIn UNATTENDED MAILER mode the following special keys are enabled:\r\n\r\n
G#314LIm MAILER Modus gilt folgende Tastaturbelegung:\r\n\r\n
E#315LC Make next call (if any) now Alt-C Enter Hydra chat mode\r\n
S#315LC Make next call (if any) now Alt-C Enter Hydra chat mode\r\n
G#315LC Mache naechsten Anruf Alt-C Beginne Hydra-Chat\r\n
E#316LAlt-B Blank the screen immediately Alt-W Redraw screen\r\n
S#316LAlt-B Blank the screen immediately Alt-W Redraw screen\r\n
G#316LAlt-B Bildschirmschoner sofort an Alt-W Bildschirm neu aufbauen\r\n
E#317LAlt-I Initialize the modem Alt-A Send answer string to modem\r\n
S#317LAlt-I Initialize the modem Alt-A Send answer string to modem\r\n
G#317LAlt-I Initialisiere das Modem Alt-A Sende Antwortstring an Modem\r\n
E#318LAlt-M Manually POLL a node Alt-Y Poll Boss Node\r\n
S#318LAlt-M Manually POLL a node Alt-Y Poll Boss Node\r\n
G#318LAlt-M Manuelles POLLEN Alt-Y Polle Boss-Node an\r\n
E#319LAlt-Q Quit the current event Alt-R Restart nonforced events\r\n
S#319LAlt-Q Quit the current event Alt-R Restart nonforced events\r\n
G#319LAlt-Q Abbruch des aktuellen Events Alt-R Neustart nichterzwungener Events\r\n
E#320LAlt-T Shift to DUMB TERMINAL mode Alt-X Exit BinkleyTerm, errorlevel 1\r\n
S#320LAlt-T Shift to DUMB TERMINAL mode Alt-X Exit BinkleyTerm, errorlevel 1\r\n
G#320LAlt-T Wechselt zum TERMINAL-Modus Alt-X Beendet BinkleyTerm, errorlevel 1\r\n
E#321LAlt-J Push to Command Shell Alt-Z Zoom Outbound window\r\n
S#321LAlt-J Push to Command Shell Alt-Z Zoom Outbound window\r\n
G#321LAlt-J Springe ins Betriebssystem Alt-Z Ausgangsfach Zoomen\r\n
E#322LAlt-O Outbound rescan Alt-D Clear \"Today at a Glance\"\r\n
S#322LAlt-O Outbound rescan Alt-D Clear \"Today at a Glance\"\r\n
G#322LAlt-O Durchsuchen des Outbound Alt-D Loesche \"Tagesueberblick\"\r\n
E#323LAlt-S Send file(s) to a node Alt-G Get(Request) file(s) from node\r\n
S#323LAlt-S Send file(s) to a node Alt-G Get(Request) file(s) from node\r\n
G#323LAlt-S Sende Datei(en) an Node Alt-G Get(Requeste) Dateien von Node\r\n
E#324LAlt-K Kill all mail to a node Alt-P Queue a poll to node\r\n
S#324LAlt-K Kill all mail to a node Alt-P Queue a poll to node\r\n
G#324LAlt-K Loesche Nachrichten an Node Alt-P Lege Poll fuer Node an\r\n
E#325LAlt-L Toggle debug mode Alt-N Event behaviour setup\r\n
S#325LAlt-L Toggle debug mode Alt-N Event behaviour setup\r\n
G#325LAlt-L Toggle Debugmodus Alt-N Event-Einstellungen\r\n
*#326LAlt-H History screen Ctrl-T Stats screen\r\n
*#327LAlt-V Toggle Modem Activity Window\r\n
;
E#328LPGUP/PGDN, UP/DOWN ARROW, HOME, and END scroll the 'Pending' window\r\n
S#328LPGUP/PGDN, UP/DOWN ARROW, HOME, and END scroll the 'Pending' window\r\n
G#328LBild/Bild, /, Pos1, und Ende scrollt das 'Pending' Fenster\r\n
E#329LAlt-E Execute '%s' as message editor\r\n
S#329LAlt-E Execute '%s' as message editor\r\n
G#329LAlt-E Starte '%s' als Nachrichteneditor\r\n
E#330LAlt-F%-2d Execute '%s'\r\n
S#330LAlt-F%-2d Execute '%s'\r\n
G#330LAlt-F%-2d Starte '%s'\r\n
E#331L\r\n
S#331L\r\n
G#331L\r\n
E#332L\r\n
S#332L\r\n
G#332L\r\n
;
; The following 3-line message is system dependent.
; For OS/2 the message should look like:
;
E#333?OS2LCouldn't initialize '%s%d'. Check config.sys for COM.SYS\r\n
E#334?OS2Lor make sure the network is started if you are using a modem\r\n
E#335?OS2Lon another computer.\r\n
S#333?OS2LCouldn't initialize '%s%d'. Check config.sys for COM.SYS\r\n
S#334?OS2Lor make sure the network is started if you are using a modem\r\n
S#335?OS2Lon another computer.\r\n
G#333?OS2LKonnte '%s%d' nicht initialisieren. Pruefe CONFIG.SYS auf COM.SYS\r\n
G#334?OS2Loder vergewissere Dich, dass das Netzwerk gestartet ist wenn Du ein Modem\r\n
G#335?OS2Lauf einen anderen Rechner benutzt.\r\n
;
; Following is the DOS version of the message:
;
E#333?DOSLI'm sorry, there doesn't appear to be a FOSSIL driver loaded.\r\n
E#334?DOSLBinkleyTerm requires a FOSSIL driver. Please take care of this before\r\n
E#335?DOSLattempting to run BinkleyTerm again.\r\n
S#333?DOSLI'm sorry, there doesn't appear to be a FOSSIL driver loaded.\r\n
S#334?DOSLBinkleyTerm requires a FOSSIL driver. Please take care of this before\r\n
S#335?DOSLattempting to run BinkleyTerm again.\r\n
G#333?DOSLKein Fossil-Treiber geladen.\r\n
G#334?DOSLBinkleyTerm benoetigt einen FOSSIL-Treiber. Bitte beachte das vor\r\n
G#335?DOSLdem naechsten Startversuch von BinkleyTerm.\r\n
;
; For Windows NT the message should look like:
;
E#333?WNTLCouldn't initialize %s%d. Make sure the port isn't in use\r\n
E#334?WNTLby another process, that you are permitted access to it, and if\r\n
E#335?WNTLyou are using a modem on another computer make sure it's online.\r\n
S#333?WNTLCouldn't initialize %s%d. Make sure the port isn't in use\r\n
S#334?WNTLby another process, that you are permitted access to it, and if\r\n
S#335?WNTLyou are using a modem on another computer make sure it's online.\r\n
G#333?WNTLKonnte den %s%d nicht inialisieren. Achte darauf das der Port\r\n
G#334?WNTLnicht von einer anderen Anwendung benutzt wird. Du solltest exclusiven\r\n
G#335?WNTLZugriff auf das Geraet haben. Ist das Modem eingeschaltet?\r\n
;
; This illustrates the use of the ? construction in the language file.
;
E#336L!Could not create temp flagfile %s.
S#336L!Could not create temp flagfile %s.
G#336L!Kann temporaeres Flagfile %s nicht anlegen.
E#337L>Created flagfile %s.
S#337L>Created flagfile %s.
G#337L>Erzeuge Flagfile %s.
E#338L Other node sending to %s.
S#338L Other node sending to %s.
G#338L Anderer Node sendet an %s.
E#339L!Erroneous attempt to clear flag for %s.
S#339L!Erroneous attempt to clear flag for %s.
G#339L!Fehlerhafter Versuch ein Flagfile fuer %s zu loeschen.
E#340L>Deleted flagfile %s.
S#340L>Deleted flagfile %s.
G#340L>Flagfile %s geloescht.
E#341L!Unable to delete flag file %s.
S#341L!Unable to delete flag file %s.
G#341L!Nicht moeglich Flagfile %s zu loeschen.
E#342L!Exceeded file request byte limit.
S#342L!Exceeded file request byte limit.
G#342L!Filerequest Mengenbegrenzung ueberschritten.
E#343L Nodelist index refresh necessary.
S#343L Nodelist index refresh necessary.
G#343L Nodelisten-Index muss neu angelegt werden!
E#344LCouldn't set SIGINT.
S#344LCouldn't set SIGINT.
G#344LKann SIGINT nicht setzen.
E#345L Modem protocol negotiation filtered.
S#345L Modem protocol negotiation filtered.
G#345L Modem Protokoll-Aushandlung gefiltert.
E#346LEvent %2d (%s) starts in %d hrs %02d min.
S#346LEvent %2d (%s) starts in %d hrs %02d min.
G#346LEvent %2d (%s) beginnt in %d Std %02d Min.
E#347LEvent %2d (%s) is running.
S#347LEvent %2d (%s) is running.
G#347LEvent %2d (%s) laeuft.
*#348LNetmail:
E#349L*Session with %s Time: %02ld:%02ld:%02ld Cost: $%ld.%02ld
S#349L*Session with %s Time: %02ld:%02ld:%02ld Cost: $%ld.%02ld
G#349L*Verbindung mit %s Dauer: %02ld:%02ld:%02ld Kosten: $%ld.%02ld
E#350L!Exceeded file request time limit.
S#350L!Exceeded file request time limit.
G#350L!Filerequest Zeitbegrenzung ueberschritten.
E#351L'%s' has a bad Queue Size code.\n
S#351L'%s' has a bad Queue Size code.\n
;
; Köstlich:
; '%s' hat falsche Warteschlangengroesse.\n
; Eigentlich müsste es ja heissen:
; '%s' hat falschen Warteschlangengroessencode.\n
; Aber sagen wir doch einfach:
;
G#351L'%s' hat falschen 'Q'-Wert.\n
E#352LUnable to allocate space for event records, exiting!\r\n
S#352LUnable to allocate space for event records, exiting!\r\n
G#352LNicht genug Speicher für Event-Daten. Abbruch!\r\n
E#353L+begin, %s
S#353L+begin, %s
G#353L+starte, %s
E#354L+end, %s
S#354L+end, %s
G#354L+beende, %s
E#355LPoll a Node
S#355LPoll a Node
G#355LPolle einen Node an
E#356LPoll:\b
S#356LPoll:\b
G#356LPolle:\b
E#357L!No common session protocol, attempting FTS-0001.
S#357L!No common session protocol, attempting FTS-0001.
G#357L!Kein gemeinsames Verbindungsprotokoll, versuche FTS-0001.
E#358L:Spawning external mailer.
S#358L:Spawning external mailer.
G#358L:Spawning zu externem Mailer.
E#359L:Returned from external mailer.
S#359L:Returned from external mailer.
G#359L:Zurueck vom externen Mailer.
E#360L#Forced exit - errorlevel %u.
S#360L#Forced exit - errorlevel %u.
G#360L#Erzwungener Abbruch - Errorlevel %u.
;
; This is the prompt in outbound.c. When you change the letters
; For Crash, Hold, Direct and Normal, change the appropriate letters
; in the following string.
;
*#361Lunused
*#362LCHDN
*#363Lunused
*#364Lunused
E#365L>Processing: %s (%s)
S#365L>Processing: %s (%s)
G#365L>Bearbeite: %s (%s)
E#366L Scanning %ld files (step %d) in %s.
S#366L Scanning %ld files (step %d) in %s.
G#366L Suche %ld Files (step %d) in %s.
E#367L!Security mismatch: %d < %d
S#367L!Security mismatch: %d < %d
G#367L!Sicherheitsfehler: %d < %d
E#368LSending EMSI \b
S#368LSending EMSI \b
G#368LSende EMSI \b
E#369LReceiving EMSI \b
S#369LReceiving EMSI \b
G#369LEmpfange EMSI \b
E#370LWaiting for EMSI \b
S#370LWaiting for EMSI \b
G#370LWarte auf EMSI \b
E#371LEMSI-Recv
S#371LEMSI-Recv
G#371LEMSI-Empfang
E#372LEMSI-Send
S#372LEMSI-Send
G#372LEMSI-Senden
E#373L>EMSI-Packet incomplete.
S#373L>EMSI-Packet incomplete.
G#373L>EMSI-Packet unvollstaendig.
E#374L?Packet doesn't start with 'EMSI'.
S#374L?Packet doesn't start with 'EMSI'.
G#374L?Packet beginnt nicht mit 'EMSI'.
E#375L:Exit after FAX reception with errorlevel %d.
S#375L:Exit after FAX reception with errorlevel %d.
G#375L:Ende nach Faxempfang mit Errorlevel %d.
E#376LPlease wait... \b
S#376LPlease wait... \b
G#376LBitte warten... \b
E#377L Address Files Bytes Age Calls Bad Status
S#377L Address Files Bytes Age Calls Bad Status
G#377L Adresse Dateien Groe Alt Anrufe Bad Status
E#378LZoomed Pending Outbound Mail
S#378LZoomed Pending Outbound Mail
G#378LAusgangsfach im Grossformat
E#379LNode is busy... \b
S#379LNode is busy... \b
G#379LNode ist in Bearbeitung...
E#380LChange Mail for %s to %s
S#380LChange Mail for %s to %s
G#380LAendere Nachrichten fuer %s auf %s
E#381LStop mail for %s
S#381LStop mail for %s
G#381LStoppt die Nachrichten fuer %s
E#382LDelete call count for %s
S#382LDelete call count for %s
G#382LLoesche Anrufzaehler fuer %s
E#383LPoll Node
S#383LPoll StarFleet Node
G#383LPolle Node
E#384LDelete requests for %s
S#384LDelete requests for %s
G#384LLoesche Requests fuer %s
E#385LChange Destination
S#385LChange Destination
G#385LAendere Zieladresse
E#386LAppending %s...
S#386LAppending %s...
G#386L%s wird angefuegt.
E#387LRenaming %s...\b
S#387LRenaming %s...\b
G#387L%s wird umbenannt.\b
E#388LError appending %s!
S#388LError appending %s!
G#388LFehler beim Anhaengen von %s!
E#389LDeleted old call count!
S#389LDeleted old call count!
G#389LLoesche alten Anrufzaehler!
E#390LMarking as a no-send!
S#390LMarking as a no-send!
G#390LMarkiere als 'nicht versenden'!
E#391LCant' open $$5 file!
S#391LCant' open $$5 file!
G#391LKann $$5-Datei nicht oeffnen!
*#392Lunused
*#393Lunused
*#394Lunused
E#395LCan't delete requests!
S#395LCan't delete requests!
G#395LKann Requests nicht loeschen!
E#396LRequests deleted!
S#396LRequests deleted!
G#396LRequests geloescht!
E#397LNew Address:
S#397LNew Address:
G#397LNeue Adresse:
E#398Lmail attach
S#398Lmail attach
G#398LNachricht angehaengt
*#399Lunused
E#400Lmail packet
S#400Lmail packet
G#400LNachrichten-Paket
*#401Lunused
E#402LCrash, Hold, Direct, Normal, Quit (C/H/D/N/Q)?
S#402LCrash, Hold, Direct, Normal, Quit (C/H/D/N/Q)?
G#402LCrash, Halten, Direkt, Normal oder Q fuer Ende (C/H/D/N/Q)?
E#403LMore requests? (Y/N) (O)ther node
S#403LMore requests? (Y/N) (O)ther node
G#403LMehr Requests? (J/N) (O)ther node
E#404LMore sends? (Y/N) (O)ther node
S#404LMore sends? (Y/N) (O)ther node
G#404LMehr Sends? (J/N) (O)Anderen Node
E#405LA Readdress mail [Alt/] G Get (request) File(s)
S#405LA Readdress mail [Alt/] G Get (request) File(s)
G#405LA Zieladresse aendern [Alt/] G Get (request) File(s)
E#406LC/D/H/N Crash/Direct/Hold/Normal [Alt/] S Send File(s)
S#406LC/D/H/N Crash/Direct/Hold/Normal [Alt/] S Send File(s)
G#406LC/D/H/N Crash/Direkt/Halten/Normal [Alt/] S Sende File(s)
E#407LI Reset Dial Tries [Alt/] P Poll a node
S#407LI Reset Dial Tries [Alt/] P Poll a node
G#407LI Loesche Anrufzaehler [Alt/] P Polle Node an
E#408LR Kill requests T Stop mail
S#408LR Kill requests T Stop mail
G#408LR Loesche Requests T Stoppe Nachricht
E#409LK Kill all mail to node Alt-I Nodelist info
S#409LK Kill all mail to node Alt-I Nodelist info
G#409LK Loesche alles fuer Node Alt-I Nodelisten info
E#410L Alt-E Set/Reset runtime flags
S#410L Alt-E Set/Reset runtime flags
G#410L Alt-E Verbindungsflags editieren
E#411LPGUP/PGDN, UP/DOWN ARROW, HOME, and END scroll window
S#411LPGUP/PGDN, UP/DOWN ARROW, HOME, and END scroll window
G#411LBild/Bild, /, Pos1, und Ende scrollt das Fenster
E#412LCannot re-open costfile.
S#412LCannot re-open costfile.
G#412LKann Kosten-Datei nicht wieder oeffnen.
E#413L Received: %d/%ldK Sent: %d/%ldK Total: %d/%ldK CPS: %ld
S#413L Received: %d/%ldK Sent: %d/%ldK Total: %d/%ldK CPS: %ld
G#413L Bekommen: %d/%ldK Gesendet: %d/%ldK Summe: %d/%ldK CPS: %ld
E#414L*Seconds: %ld Tariff: %d Fee: %ld RFee: %ld System: %s
S#414L*Seconds: %ld Tariff: %d Fee: %ld RFee: %ld System: %s
G#414L*Sekunden: %ld Tarif: %d Kosten: %ld AKosten: %ld System: %s
E#415L:Inbound request file %s.REQ received as %s.R%02x.
S#415L:Inbound request file %s.REQ received as %s.R%02x.
G#415L:Eingehendes Requestfile %s.REQ umbenannt in %s.R%02x.
E#416L\r**Hydra session initiated (AutoStart).\r\n
S#416L\r**Hydra session initiated (AutoStart).\r\n
G#416L\r**Hydra session gestartet (AutoStart).\r\n
E#417L\r**Hydra session finished.\r\n
S#417L\r**Hydra session finished.\r\n
G#417L\r**Hydra session beendet.\r\n
E#418L*Start external mail session with %s.
S#418L*Start external mail session with %s.
G#418L*Starte externe Mail-Session mit %s.
E#419L*End external mail session with %s.
S#419L*End external mail session with %s.
G#419L*Beende externe Mail-Session mit %s.
E#420L:Shelling after FAX with ErrLevelShell %d.
S#420L:Shelling after FAX with ErrLevelShell %d.
G#420L:Shelling nach FAX mit ErrLevelShell %d.
E#421L:Shelling after compressed mail with ErrLevelShell %d.
S#421L:Shelling after compressed mail with ErrLevelShell %d.
G#421L:Shelling nach gepackter Mail mit ErrLevelShell %d.
E#422L:Shelling after file extension \'%s\' with ErrLevelShell %d.
S#422L:Shelling after file extension \'%s\' with ErrLevelShell %d.
G#422L:Shelling nach Dateiendung \'%s\' mit ErrLevelShell %d.
E#423L:Shelling after mail with ErrLevelShell %d.
S#423L:Shelling after mail with ErrLevelShell %d.
G#423L:Shelling nach Mail mit ErrLevelShell %d.
E#424L:Starting session for ErrLevelShell %d.
S#424L:Starting session for ErrLevelShell %d.
G#424L:Starte Session fuer ErrLevelShell %d.
E#425L:Returning from ErrLevelShell.
S#425L:Returning from ErrLevelShell.
G#425L:Zurueck von ErrLevelShell.
E#426L!Could not open %s for scanning.
S#426L!Could not open %s for scanning.
G#426L!Konnte %s nicht zum Scannen oeffnen.
E#427L!Seek error scanning %s.
S#427L!Seek error scanning %s.
G#427L!Seek-Fehler beim Scannen von %s.
E#428L!Read error scanning %s.
S#428L!Read error scanning %s.
G#428L!Lese-Fehler beim Scannen von %s.
E#429L!Trashed header found while scanning %s.
S#429L!Trashed header found while scanning %s.
G#429L!Muell-Header beim Scannen gefunden %s.
E#430L#Shell at start of event with ErrLevelShell %d.
S#430L#Shell at start of event with ErrLevelShell %d.
G#430L#Shell am Anfang des Events mit ErrLevelShell %d.
E#431LErrLevelShell number %d out of range 1 - 255.\n
S#431LErrLevelShell number %d out of range 1 - 255.\n
G#431LErrLevelShell-Nummer %d ausserhalb von 1 - 255.\n
E#432L:Dialing AltNumber %s (%s)
S#432L:Dialing AltNumber %s (%s)
G#432L:Waehle AltNumber %s (%s)
E#433LPrimary number missing from AltNumber.\n
S#433LPrimary number missing from AltNumber.\n
G#433LPrimaere Nummer fehlt bei AltNumber.\n
E#434LAlternate number missing from AltNumber.\n
S#434LAlternate number missing from AltNumber.\n
G#434LAlternative Nummer fehlt bei AltNumber.\n
E#435L#Forced shell - errorlevel %u.
S#435L#Forced shell - errorlevel %u.
G#435L#Erzwungene Shell mit Errorlevel %u.
E#436LNo environment variable TASK defined (use e.g.: BT32.EXE TASK=1). Aborting.\n
S#436LNo environment variable TASK defined (use e.g.: BT32.EXE TASK=1). Aborting.\n
G#436LKeine Environment-Variable TASK definiert (z.B.: BT32.EXE TASK=1). Abbruch.\n
E#437L:Synchronizing my clock to %02d/%02d/%02d %02d:%02d:%02d.
S#437L:Synchronizing my clock to %02d/%02d/%02d %02d:%02d:%02d.
G#437L:Synchronisiere meine Uhr auf %02d/%02d/%02d %02d:%02d:%02d.
E#438L:Acceptance of %s. 2nd call within %ld s. [%s TRUE]
S#438L:Acceptance of %s. 2nd call within %ld s. [%s TRUE]
G#438L:Akzeptanz von %s. 2ter Anruf innerhalb %ld s. [%s TRUE]
E#439L:No acceptance of %s. KB Hold: %ld < min. %ld. [%s FALSE]
S#439L:No acceptance of %s. KB Hold: %ld < min. %ld. [%s FALSE]
G#439L:Keine Akzeptanz von %s. KB Hold: %ld < min. %ld. [%s FALSE]
E#440L:Acceptance of %s. KB Hold: %ld >= min. %ld. [%s TRUE]
S#440L:Acceptance of %s. KB Hold: %ld >= min. %ld. [%s TRUE]
G#440L:Akzeptanz von %s. KB Hold: %ld >= min. %ld. [%s TRUE]
E#441L:Invoking SRIF ERP: %s
S#441L:Invoking SRIF ERP: %s
G#441L:Rufe SRIF-ERP auf: %s
E#442L:Accepting call. [Total acceptance = TRUE]
S#442L:Accepting call. [Total acceptance = TRUE]
G#442L:Akzeptiere Anrufer. [Gesamt-Akzeptanz = TRUE]
E#443L:Rejecting call. [Total acceptance = FALSE]
S#443L:Rejecting call. [Total acceptance = FALSE]
G#443L:Lehne Anrufer ab. [Gesamt-Akzeptanz = FALSE]
E#444L:Acceptance of %s. First call. [%s TRUE]
S#444L:Acceptance of %s. First call. [%s TRUE]
G#444L:Akzeptanz von %s. Erster Anruf. [%s TRUE]
E#445L*Call rejected.
S#445L*Call rejected.
G#445L*Ruf abgewiesen.
E#446L#%s is write protected.
S#446L#%s is write protected.
G#446L#%s ist schreibgeschuetzt.
E#447L Local: %s\b
S#447L Local: %s\b
G#447L Lokal: %s\b
E#448L Remote: %s\b
S#448L Remote: %s\b
G#448L Fern: %s\b
*#449Lunused
*#450LModem Activity
*#451Lunused
*#452Lunused
*#453Lunused
*#454LYooHoo
*#455LYooHoo/2u2
*#456LEMSIsend
*#457LEMSIwait
*#458LEMSIrecv
*#459LEMSIrcvd
*#460LProtcol:
*#461LxHydra
*#462LExtern
*#463LFTS-1
*#464LSession:
*#465LEMSI
*#466LHydra
*#467LJanus
*#468LZedZap
*#469LZedZip
*#470LDTE:
*#471LOFFLINE
*#472LSession
*#473LDCE:
*#474LXmodem
*#475Lunused
*#476Lunused
*#477Lunused
*#478Lunused
*#479Lunused
E#480LFilename to Get !Password $Size Flavour (Crash,Direct,Norm,Quit)
S#480LFilename to Get !Password $Size Flavour (Crash,Direct,Norm,Quit)
G#480LRequestfilename !Passwort $Groesse Art (Crash,Direkt,Normal,Quit)
E#481L Select a nodeentry [Alt-I for info]
S#481L Select a nodeentry [Alt-I for info]
G#481L Nodeeintrag auswaehlen [Alt-I für Infos]
E#482LSysop name Address Flag Speed Mdm Pwd
S#482LSysop name Address Flag Speed Mdm Pwd
G#482LSysopname Adresse Flag Baud Mdm PW\b
E#483L System not found!
S#483L System not found!
G#483L System nicht gefunden!
E#484LShould I really use [%s] ?
S#484LShould I really use [%s] ?
G#484LSoll ich wirklich [%s] benutzen ?
*#485Lunused
*#486Lunused
*#487Lunused
*#488Lunused
*#489Lunused
E#490LRescanning
S#490LRescanning
G#490LRescanne
E#491L:Rescanning outbound
S#491L:Rescanning outbound
G#491L:Ausgangsfach wird neu gelesen
E#492L:Rejecting human caller.
S#492L:Rejecting human caller.
G#492L:Weise Mailbox-Benutzer ab.
E#493L:Invalid definition of Cost Event (!=...).
S#493L:Invalid definition of Cost Event (!=...).
G#493L:Ungueltige Kosten-Event-Definition (!=...).
E#494LReading
S#494LReading
G#494LLese
E#495L:Reading outbound dump.
S#495L:Reading outbound dump.
G#495L:Lese Outbound-Dump.
E#496L'%s' has an invalid event name field.\n
S#496L'%s' has an invalid event name field.\n
G#496L'%s' hat ein ungueltiges Event-Namens-Feld.\n
E#497L'%s' has invalid Lx event.\n
S#497L'%s' has invalid Lx event.\n
G#497L'%s' enthaelt ungueltigen Lx-Event.\n
;
; Fossil Announcement / Translation
;
*#498LVX00:VX00,X00:X00,BNU:BNU,CFOS:cFos,OPUS:Opus!Comm,FCI:FCI,DRCOMM:DrComm,ANDAN:ADF,WINFOS:WinFossil
;
*#499LTerminal
*#500Lunused
*#501Lunused
*#502Lunused
*#503Lunused
*#504Lunused
*#505Lunused
;
; CSS.C strings
;
; some alternative progress bars - DO NOT USE COLOURS HERE!
; *#506L[*+-]
; *#506L[=- ]
; *#507L[█▌ ]
; *#507L[█▀ ]
; *#507L[█▒░]
; *#507L[■∙ ]
;
*#506L[*+-]
*#507L[■∙ ]
*#508LTx File
*#509LRx File
E#510LCurrent Session Statistics
S#510LCurrent Transfer Engine Status
G#510LStatistik aktuelle Verbindung
E#511LTx current
S#511LTx current
G#511LTx aktuell
E#512LTx total
S#512LTx total
G#512LTx gesamt
E#513LRx current
S#513LRx current
G#513LRx aktuell
E#514LRx total
S#514LRx total
G#514LRx gesamt
;
; Max MCP strings part 1
;
*#515L*FROZEN*
*#516LInitializing
*#517LWaiting for Call
*#518LOS Shell
*#519LSpawned
*#520LHanging Up
*#521LAnswering
*#522LConnecting
*#523LReceiving FAX
*#525LDialing %s
*#524LMail Xfer with %s
*#526LBinkleyTerm XE
*#527LExiting
*#528LReturning
*#529L!Couldn't open %s.
;
; Fax
;
*#530L FAX Received %d pages.
*#531L FAX Error during transmission.
*#532L!FAX Couldn't create output file %s.
*#533LFAX Rcv
*#534L FAX Connect with %s.
*#535L FAX File received %s (%lub).
*#536L!FAX Error receiving page.
*#537Lunused
*#538Lunused
*#539Lunused
;
*#540L:Ignoring %s. It is %lu minutes old.
*#541L:Binkley frozen until %s goes away.
*#542L:Binkley unfrozen - reinitializing.
*#543L:Modem not responding OK. Spawning SpawnNoOK command.
*#544L:Rescanned: %d.%02d seconds, %ld KB cache. Average %d.%02d seconds.
*#545L!Could not rename '%s' to '%s'.
*#546L:Remote Mail on Hold: %ldb
*#547L Remote refused mail-pickup.
*#548L:Local Mail on Hold: %ldb
*#549L!No YOOHOO/2U2.
*#550Lunused
*#551Lunused
*#552Lunused
*#553Lunused
*#554Lunused
*#555Lunused
*#556Lunused
;
; Max MCP strings part 2
;
*#557LRescanning outbound
*#558LReading outbound dump
*#559LTerminal
;
E#560L:Posting Event Semaphore for ErrLevelShell %d.
S#560L:Posting Event Semaphore for ErrLevelShell %d.
G#560L:Poste Event Semaphore fuer ErrLevelShell %d.
E#561L!Event Semaphore %s does not exist.
S#561L!Event Semaphore %s does not exist.
G#561L!Event Semaphore %s existiert nicht.
*#562Lunused
*#563L#Creating Poll for %s at start of event completed.
*#564L!Creating Poll for %s at start of event failed.
;
*#565L (Main Help reserved 1)
*#566L (Main Help reserved 2)
*#567L (Main Help reserved 3)
*#568L (Main Help reserved 4)
*#569L (Main Help reserved 5)
*#570L (Main Help reserved 6)
*#571L (Main Help reserved 7)
*#572L (Main Help reserved 8)
E#573LF1..F10 Exit BinkleyTerm with errorlevel (10*n) (F1=10,etc)\r\n
S#573LF1..F10 Exit BinkleyTerm with errorlevel (10*n) (F1=10,etc)\r\n
G#573LF1..F10 Bende BinkleyTerm mit Errorlevel (10*n) (F1=10,etc)\r\n
*#574L\r\n
*#575L/unreg.
;
;
; First Product Code must be -1 and the Unknown product. Put -1 Unknown
; somewhere else, and you are sure to screw things up
;
*P-1 Unknown
*P0 Fido/Unknown
*P1 Rover
*P2 SEAdog
*P3 WinDog
*P4 Slick-150
*P5 Opus
*P6 Dutchie
*P7 WPL_Library
*P8 Tabby
*P9 SWMail
*P10 Wolf/68k
*P11 QMM
*P12 FrontDoor
*P17 MailMan
*P19 GS-Point
*P20 BGMail
*P21 ComMotion
*P22 OurBBS
*P24 WimpLink
*P26 D'Bridge
*P27 BinkleyTerm
*P30 Daisy
*P31 Polar Bear
*P32 The-Box
*P33 STARGate/2
*P35 TCOMMail
*P38 Apple-Netmail
*P39 Chameleon
*P40 Majik Board
*P47 Domain
*P49 Rose
*P50 Paragon
*P51 Binkley/ST
*P52 StarNet
*P56 PBBS
*P57 TrapDoor
*P58 Welmat
*P60 Odie
*P61 Quick Gimme
*P62 dbLink
*P64 Beagle
*P65 Igor
*P66 TIMS
*P67 Phoenix
*P68 FrontDoor_APX
*P74 BIX-Mail
*P78 Lora-CBIS
*P79 TDCS
*P80 InterMail
*P84 QBoxMail
*P85 Number_4
*P86 Number_5
*P88 Merlin
*P91 Outpost
*P94 rfmail
*P100 PC-RAIN
*P101 Truffle
*P103 White Pointer
*P105 Portal of Power
*P106 MacWoof
*P109 HandyMail
*P113 Benjamin
*P114 RiBBS
*P117 Door2Europe
*P118 SWIFT
*P121 Harry the Dirty Dog
*P148 Fone-Link
*P152 DoorMan
*P154 SCREAM
*P155 MoonMail
*P157 MailLink
*P159 Black Star
*P161 PT
*P162 UltiMail
*P166 Foodo
*P168 Boston BBS
*P169 XenoMail
*P170 XenoLink
*P172 MilqueToast
*P181 CommLink
*P185 MHS
*P191 NextBBS
*P196 ProMailer
*P197 MegaMail
*P202 Arc-Binkley
*P205 NMS
*P206 BBCSCAN
*P208 LoTek Vzrul
*P214 Hercules
*P215 AMPRGATE
*P216 BinkEMSI
*P222 Paradise
*P223 DogMatic-ACB
*P224 T-Mail
*P226 MainDoor
*P227 Starnet_Products
*P230 MailMaster
*P233 CrossPoint
*P236 NetWay
*P240 Bert
*P248 TP_Kom
*P250 !!MessageBase
;
;
; Note: Don't mess with the ordering of the table below. To remap a
; key, change the scan code (leaving the "U" or "T" alone). It
; would also be wise to change the "Key" description so you
; can figure out what on earth you did later on.
;
; Don't forget to change the help screen text above.
;
; Unattended mode key mappings
;Scan Function
;Code Code Description Key
;
*U1e00 fe00 answer ALT-A
*U1700 fe01 modem reinit ALT-I
*U0043 fe02 immediate call C
*U0063 fe02 immediate call C
*U1500 fe03 poll bossnode ALT-Y
*U3200 fe04 poll specified node ALT-M
*U1900 fe05 poll packet for node ALT-P
*U1800 fe06 outbound rescan ALT-O
*U2600 fe07 toggle debug mode ALT-L
*U2f00 fe08 toggle modem window ALT-V
;
*U1400 fe10 to terminal mode ALT-T
*U1200 fe11 to user's editor ALT-E
*U2d00 fe12 exit BinkleyTerm ALT-X
;
*U3b00 fe21 exit with status 10 PF1
*U3c00 fe22 exit with status 20 PF2
*U3d00 fe23 exit with status 30 PF3
*U3e00 fe24 exit with status 40 PF4
*U3f00 fe25 exit with status 50 PF5
*U4000 fe26 exit with status 60 PF6
*U4100 fe27 exit with status 70 PF7
*U4200 fe28 exit with status 80 PF8
*U4300 fe29 exit with status 90 PF9
*U4400 fe2a exit with status 100 PF10
;
*U2400 fe30 shell to OS prompt ALT-J
*U6800 fe31 invoke user shell 1 ALT-F1
*U6900 fe32 invoke user shell 2 ALT-F2
*U6a00 fe33 invoke user shell 3 ALT-F3
*U6b00 fe34 invoke user shell 4 ALT-F4
*U6c00 fe35 invoke user shell 5 ALT-F5
*U6d00 fe36 invoke user shell 6 ALT-F6
*U6e00 fe37 invoke user shell 7 ALT-F7
*U6f00 fe38 invoke user shell 8 ALT-F8
*U7000 fe39 invoke user shell 9 ALT-F9
;
*U2200 fe40 get (request) a file ALT-G
*U1f00 fe41 send a file ALT-S
*U2500 fe42 kill outbound for node ALT-K
;
*U2c00 fe43 zoom outbound ALT-Z
;
;
*U0041 fe65 readdress mail A
*U0061 fe65
;
;This conflicts with "immediate call" above, making these entries
;redundant. We have them here for completeness and also support the
;"immediate call" key for crash.
;
*U0043 fe66 crash C
*U0063 fe66
;
*U0044 fe67 direct D
*U0064 fe67
*U0047 fe68 get file G
*U0067 fe68
*U0048 fe69 hold H
*U0068 fe69
*U0049 fe6a kill dial tries I
*U0069 fe6a
*U004b fe64 kill node's mail K
*U006b fe64
*U004e fe6b normal N
*U006e fe6b
*U0050 fe6c poll node P
*U0070 fe6c
*U0052 fe6d kill requests R
*U0072 fe6d
*U0053 fe6e send files S
*U0073 fe6e
*U0054 fe6f stop mail T
*U0074 fe6f
;
*U7100 fe50 mailer help screen ALT-F10
*U3000 fe51 blank the screen ALT-B
*U1100 fe52 refresh the screen ALT-W
;
*U2e00 fe60 enter chat mode ALT-C
*U1300 fe61 restart events ALT-R
*U1000 fe62 quit this event ALT-Q
*U2000 fe63 reset daily history ALT-D
;
*U5000 fe70 scroll outbound down 1 DN ARROW
*U4800 fe71 scroll outbound up 1 UP ARROW
*U5100 fe72 scroll outbound down 4 PG DN
*U4900 fe73 scroll outbound up 4 PG UP
*U4700 fe74 scroll outbound to top HOME
*U4f00 fe75 scroll outbound to end END
;
*U9100 fe76 scroll recent activity down 1 CTRL-DN ARROW
*U7400 fe76 scroll recent activity down 1 CTRL-RIGHT ARROW
*U8d00 fe77 scroll recent activity up 1 CTRL-UP ARROW
*U7300 fe77 scroll recent activity up 1 CTRL-LEFT ARROW
;
;TE 960613: Ctrl+Dn/Up does not work in some environments, while
; Ctrl+Left/Right does
;
*U7600 fe78 scroll recent activity down 9 CTRL-PG DN
*U8400 fe79 scroll recent activity up 9 CTRL-PG UP
*U7700 fe7a scroll recent activity to top CTRL-HOME
*U7500 fe7b scroll recent activity to end CTRL-END
*U3100 fe7c Event behaviour setup ALT-N
*U2300 fe7d Call history window ALT-H
*U0014 fe7e Stats window CTRL-T
*U0002 fe7f internal BBS local mode CTRL-B
;
;
;
; Terminal mode key mappings
;Scan Function
;Code Code Description Key
;
*T3000 fd00 set baud rate ALT-B
*T2e00 fd01 set data and stop bits ALT-C
*T1f00 fd02 start/stop break ALT-S
*T1900 fd03 change comm port ALT-P
;
*T1700 fd10 re-init the modem ALT-I
*T2300 fd11 hang up the modem ALT-H
;
*T2000 fd20 dial a specified number ALT-D
*T1300 fd21 dial a hunt group ALT-R
*T1500 fd22 poll the bossnode ALT-Y
*T3200 fd23 poll a specified node ALT-M
;
*T5100 fd30 download a file PG DN
*T4900 fd31 upload a file PG UP
*T2600 fd32 open/close capture file ALT-L
*T8300 fd33 gateway (no map) toggle ALT-=
;
*T6800 fd41 send macro 1 to remote ALT-F1
*T6900 fd42 send macro 2 to remote ALT-F2
*T6a00 fd43 send macro 3 to remote ALT-F3
*T6b00 fd44 send macro 4 to remote ALT-F4
*T6c00 fd45 send macro 5 to remote ALT-F5
*T6d00 fd46 send macro 6 to remote ALT-F6
*T6e00 fd47 send macro 7 to remote ALT-F7
*T6f00 fd48 send macro 8 to remote ALT-F8
*T7000 fd49 send macro 9 to remote ALT-F9
;
*T1200 fd50 clear the screen ALT-E
*T7100 fd51 terminal help screen ALT-F10
*T2f00 fd52 display Bink version ALT-V
;
;
*T1600 fd60 to unattended mode ALT-U
*T2d00 fd61 exit BinkleyTerm ALT-X
*T2400 fd62 shell to OS prompt ALT-J
;
;
; Terminal mode ANSI key mappings
;
; What you are looking at here is a table of strings that
; will be sent out the comm port if you use a particular
; FUNCTION key.
;
; You have lots of leeway in these definitions. In fact,
; the code will even handle nulls (\0). However, because
; we want to be able to comment this, we don't allow imbedded
; blanks. Use \b to get a blank if you want one.
;
; Note: keyboard remapping precedes ANSI output mapping.
; If you map Fkey1 to Fkey2, don't be too surprised that
; Bink uses Fkey2's value when addressing this table.
;
;Scan ANSI
;Code String Description Key
;
*A3b00 \033OP PF1 F1
*A3c00 \033OQ PF2 F2
*A3d00 \033Ow keypad '7' F3
*A3e00 \033Ox keypad '8' F4
*A3f00 \033Ot keypad '4' F5
*A4000 \033Ou keypad '5' F6
*A4100 \033Oq keypad '1' F7
*A4200 \033Or keypad '2' F8
*A4300 \033Op keypad '0' F9
*A4400 \033Op keypad '0' F10
*A4800 \033[A Up Arrow Up Arrow
*A4b00 \033[D Left Arrow Left Arrow
*A4d00 \033[C Right Arrow Right Arrow
*A5000 \033[B Down Arrow Down Arrow
*A5400 \033OR PF3 Shift-F1
*A5500 \033OS PF4 Shift-F2
*A5600 \033Oy keypad '9' Shift-F3
*A5700 \033Om keypad '-' Shift-F4
*A5800 \033Ov keypad '6' Shift-F5
*A5900 \033Ol keypad ',' Shift-F6
*A5a00 \033Os keypad '3' Shift-F7
*A5b00 \033OM keypad 'Enter' Shift-F8
*A5c00 \033On keypad '.' Shift-F9
*A5d00 \033OM keypad 'Enter' Shift-F10
;
;
; Below are the changes that Bob makes to this file in order to use
; Bink's terminal mode with the TBBS full screen editor and with
; TDBS. He uses CTRL-PGUP and CTRL-PGDN for upload/download so that
; PGUP and PGDN can be converted to control characters and sent out
; to TBBS.
;
; The codes that TBBS uses are approximately those that WordStar would
; like to see, with the exception of CTRL-S. For some reason, that
; character seems to foul things up <grin>. So CTRL-O is used.
;
;
; Terminal mode command changes: replace download and upload
; lines with the following two (uncommented, of course:
;
;T7600 fd30 download a file Ctrl-PG DN
;T8400 fd31 upload a file Ctrl-PG UP
;
; Terminal mode key mapping: replace ANSI table above with the
; following:
;
; TBBS/TDBS cursor control keys
;
;A4800 \005 TBBS FSE Up Arrow Up Arrow
;A5000 \030 TBBS FSE Down Arrow Down Arrow
;A4b00 \017 TBBS FSE Left Arrow Left Arrow
;A4d00 \004 TBBS FSE Right Arrow Right Arrow
;
; TBBS/TDBS paging keys
;
;A4900 \022 TBBS FSE Page Up PG UP
;A5100 \003 TBBS FSE Page Dn PG DN
;A4700 \027 TBBS FSE Home Home
;A4f00 \020 TBBS FSE End End
;
; TBBS/TDBS editing keys
;
;A5200 \026 TBBS FSE Ins Ins
;A5300 \007 TBBS FSE Del Del
;
; TBBS/TDBS addtional keys
;
;A3b00 \032 TBBS FSE Help F1
;A4400 \033 TBBS FSE Exit F10