home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.sunet.se/pub/OS2/
/
2014.11.ftp.sunet.se_pub_OS2.tar
/
ftp.sunet.se
/
pub
/
OS2
/
hobbes
/
os2
/
util
/
power
/
00filesd.txt
< prev
next >
Wrap
Text File
|
2008-07-15
|
17KB
|
255 lines
bkupsmon007r4.zip 114598 2008/07/16 Monitor for APC Back-UPS CS/ES (USB) v
0.07r4
Long desc: The program is intended for tracking a
condition of a uninterruptable power
supply (UPS) of series APC Back-UPS CS and
Back-UPS ES (testing for other UPSes was
not made!), connected by means of a
standard USB-cable (part number 940-
0127B), and also for deenergizing a
computer in case of switching-off of power
supplies.
Runs on: OS/2 Warp, eComStation
Requires: USB 1.1 Expanded Control Driver
(usbecd10.zip, http://hobbes.nmsu.edu/cgi-
bin/h-search?key=USBECD&pushbutton=Search)
Contact: Larin Yury (improver@rambler.ru)
Source: http://apcusbm.narod.ru/index.html
upsopt11.zip 625737 2008/03/18 UPS Monitor for Opti-UPS ES Series
Long desc: UPS Monitor for Opti-UPS Enhanced Series
(ES), tested with model 1000C. Other
models in that series may be supported.
Runs on: OS/2 Warp 3.0 and later, eComStation
Requires: Opti-UPS Enhanced Series model 1000C, other
in that series may be supported.
Contact: Armin Schwarz (ASchw@att.net)
Source: http://home.att.net/~LPAInfo
upsopt10.zip 311290 2008/02/25 UPS Monitor for Opti-UPS ES Series
Long desc: UPS Monitor for Opti-UPS Enhanced Series
(ES), tested with model 1000C. Other
models in that series may be supported.
Runs on: OS/2 Warp 3.0 and later, eComStation
Requires: Opti-UPS Enhanced Series model 1000C
Contact: Armin Schwarz (ASchw@att.net)
Source: http://home.att.net/~LPAInfo
upsmop10.zip 330193 2008/02/25 UPS Monitor for Opti-UPS PowerES Series
Long desc: UPS Monitor for Opti-UPS PowerES Series,
tested with model 1400es. This model is no
longer available but this UPS protocol may
support other models.
Runs on: OS/2 Warp 3.0 and later, eComStation
Requires: Opti-UPS PowerES Series, tested with model
1400es (no longer available).
Contact: Armin Schwarz (ASchw@att.net)
Source: http://home.att.net/~LPAInfo
upsmpw10.zip 269989 2008/02/25 UPS Monitor for Powerware UPS 5125
Long desc: UPS Monitor for Powerware UPS, tested with
model 5125.
Runs on: OS/2 Warp 3.0 and later, eComStation
Requires: Powerware UPS model 5125
Contact: Armin Schwarz (ASchw@att.net)
Source: http://home.att.net/~LPAInfo
forups102.zip 1075326 2006/01/09 UPS power manager
Long desc: UPS power manager, currently only works
with megatec compatible UPS devices. The
megatec protocol ought to support the
following devices:- - Fenton Technologies
models: - PowerPal L series - PowerOn -
PowerPure - Effekta MI/MT/MH models (2502
cable) - PowerGuard PG-600 - PowerCom SMK-
800A, ULT-1000 - Giant Power MT650 - UNITEK
ALPHA 500 IC - Unitek Alpha 1000is -
SuperPower HP360, Hope-550 GPLed driver
sources are provided for developing other
devices. This update improves the
reliability of the serial interface.
Runs on: OS/2
Contact: Peter Koller (support@manglais.com)
Source: http://www.manglais.com/ups/
upsdmn10.zip 161019 2005/01/07 UPS Monitor Daemon for contact closure type
UPS.
Long desc: UPS Monitor Daemon monitors contact closure
type UPS for power fail or low battery
alarm and shuts system down gracefully.
VIO program using very little system
resources.
upsdmn09d.zip 160971 2004/06/14 UPS Monitor Daemon for contact closure type
UPS.
Long desc: UPS Monitor Daemon monitors contact closure
type UPS for power fail or low battery
alarm and shuts system down gracefully.
VIO program using very little system
resources.
Runs on: OS/2 Warp 4, eComStation
Requires: Contact closure type UPS (APC, Belkin, IBM,
Tripplite, etc)
Source: http://home.att.net/~LPAInfo
upsdmn.zip 141973 2004/04/15 UPS Monitor Daemon for contact closure type
UPS.
Long desc: UPS Monitor Daemon monitors contact closure
type UPS for power fail or low battery
alarm and shuts system down gracefully.
VIO program using very little system
resources.
Runs on: OS/2 Warp 4, eComStation
Requires: Contact closure type UPS
Source: http://home.att.net/~LPAInfo
upsmonc.zip 552489 2004/02/05 UPS Monitor C v1.3 for contact closure UPS.
Freeware.
Long desc: UPS Monitor C (OS/2 and eComStation)
supports contact closure UPS models from
Tripplite, IBM, CyberPower and possibly
other manufacturers. See archive for
details.
Runs on: OS/2 Warp 4.0 and later or eComStation
Requires: Tripplite INTERNET Office, IBM Professional
Office models 500 and 700, CyberPower (all
models) and others.
Contact: Lone Peak Automation (LPAInfo@att.net)
Source: http://home.att.net/~LPAInfo/upsmonitor.html
upsmonb.zip 488726 2004/02/05 UPS Monitor B v1.3 for APC Back-UPS, Back-
UPS Office and Back-UPS ES. Freeware.
Long desc: UPS Monitor B (OS/2 or eComStation)
supports simple signaling UPS models from
American Power Conversion (APC). See
archive for details.
Runs on: OS/2 Warp 4.0 and later or eComStation
Requires: APC Back-UPS, Back-UPS Office or Back-UPS
ES
Contact: Lone Peak Automation (LPAInfo@att.net)
Source: http://home.att.net/~LPAInfo/upsmonitor.html
upsmon2.zip 573462 2004/02/05 UPS Monitor v1.3 for APC Smart-UPS, Back-
UPS Pro, and other smart APC UPS. Freeware.
Long desc: UPS Monitor (OS/2 and eComStation) supports
smart signaling UPS models from American
Power Conversion (APC). See archive for
details.
Runs on: OS/2 Warp 4.0 and later. eComStation
Requires: APC Smart-UPS, Back-UPS Pro, other smart
APC UPS
Contact: Lone Peak Automation (LPAInfo@att.net)
Source: http://home.att.net/~LPAInfo/upsmonitor.html
pmapm010.zip 67857 2003/06/18 PMAPM Version 0.1. Include Source Code.
PmApm is a Presentation Manager (PM)
interface to APM/2. It allows to use the
different power-down methods that are
integrated in APM 1.2 on OS/2 systems:
"standby", "suspend" and "poweroff".
Long desc: PMAPM Version 0.1. Include Source Code -
Public Domain. PmApm is a Presentation
Manager (PM) interface to APM/2. It allows
to use the different power-down methods
that are integrated in APM 1.2 on OS/2
systems: "standby", "suspend" and
"poweroff". Now Released under the GNU GPL
license.
Runs on: Warp 4 / eCS 1.0 or Later
Requires: APM
Contact: Cornelis Bockemuehl (cbockem@tiscali.ch)
os2apm.zip 20883 2002/08/12 Command line interface to APM system
Long desc: Utility program to issue IOCTL_POWER
commands to the APM driver. Source
included.
Runs on: OS/2
Requires: APM installed
Contact: Stephan Dahl (sdahl@get2net.dk)
upsmpc2.zip 541511 2001/10/15 UPS Monitor for PowerCard v1.2 for Guardian
On Board PowerCard.
Long desc: UPS Monitor for PowerCard supports internal
PowerCard UPS from Guardian On Board. See
http://www.guardian-ups.com
Runs on: OS/2 Warp 4.0 and later or eCS.
Requires: PowerCard Internal UPS made by Guardian On
Board.
Contact: Lone Peak Automation
(LPAInfo@worldnet.att.net)
Source: http://home.att.net/~ASchw/upsmonitor.html
apm2v14.zip 94245 2001/08/03 Advanced Power Management for OS/2
Long desc: APM/2 Version 1.40 for IBM OS/2 Warp 4.
APM/2 allows you to put your workstation
into APM standby, suspend or power off
mode under Warp 4. I emphasize Warp 4, as
only that version has the required support
in APM.SYS, other system files and the
Kernel to successfully process APM power
off requests. However, you can force APM/2
power off to run under Warp 3 and before
by the commandline option /Force (usefuly
when a fixpack improves APM support).
APM/2 also allows you to schedule a
automatic power on, if APM level 1.2+ is
detected. APM requests can also be
scheduled. APM/2 is NLS enabled that
allows you easily to create a translation
in your national (SBCS single byte
character set) language.
os2v423.zip 1086589 2001/03/08 APC PowerChute Plus for OS/2
Runs on: OS/2 Warp 4
Requires: serial communications cable
initapc.zip 17367 2001/02/28 Initialization code for APC UPS models
Long desc: InitAPC allows the use of "PowerChute for
OS/2" software using an 940-0095B cable
type (aka PNP cable).
Runs on: Only tested on Warp4 and WSeB.
Requires: APC UPS model supporting "smart signaling",
940-0095B cable type and "PowerChute for
OS/2".
Contact: Antonio Sanmarti (warper at ansaro dot com)
puc1.zip 17116 2001/02/02 Parallelport USV/UPS Control
Long desc: Control your USV/UPS over Parallelport.
OS/2 VIO Application.
Requires: OS/2 Warp
Contact: Denny Mleinek (denny@esa-box.de)
hapm061e.zip 145596 2001/01/03 Yotogi-Hime's APM Monitor ver.0.61e
(international release)
Long desc: This allows you to check power status,
battery remainder, etc. And also can
perform APM sleep/suspend/power-off or
restart system. It looks quite simple, but
much better than standard WPS 'Power'
object, I think :-)
Runs on: Warp4 or later
Requires: APM support
Contact: Takayuki 'January June' Suwa
(jjsuwa@sys3175.com)
Source: http://www.sys3175.com/~jjsuwa/
m_upsd12.zip 13739 2000/04/04 Micro UPS Daemon v1.2
Long desc: Tiny & powerfull UPS daemon for APC
BackUPS-Pro and APC SmartUPS.
Runs on: OS/2
Contact: Stepan Kazakov (madded@zuko.istu.udm.ru)
Source: http://zuko.istu.udm.ru/madded/m_upsd12.zip
xbatt.zip 28831 2000/03/16 xbatt 1.2, battery status monitor
Long desc: xbatt is an X11 client which displays the
battery status of your notebook computer
equiped with APM BIOS.
Requires: XFree86 and EMX, Xpm
Contact: Kyosuke Tokoro (NBG01720@nifty.ne.jp)
Source: http://www.vector.co.jp/authors/VA000199/os2/
opsos2.zip 1669241 1999/07/27 OPTI-SAFE+ version 3.50 for OS/2
Long desc: Opti-UPS software for OS/2
Runs on: OS/2 Warp 3/4
Requires: Opti-UPS model E, ES, or PS
Contact: http://www.optiups.com
papos2.zip 1984130 1999/07/27 PowerAlert Plus version 10.1 for OS/2
Long desc: TrippLite UPS software for OS/2
Runs on: OS/2 Warp 3/4
Requires: TrippLite UPS (be sure to check out which
models use PowerAlert Plus at their
website)
Contact: http://www.tripplite.com
upsmon01.zip 8310 1999/01/19 APC UPS Monitor Daemon
Long desc: APC UPS Monitor Daemon
Runs on: Only tested on Warp 4, should work on
v2.1/3
Contact: Mike Byrne (upsmon@turbolink.net)
os2upsd.zip 38252 1998/01/26 OS/2 daemon for Trust UPS 400/650
Runs on: OS/2 Warp 3.0 and up
Contact: Menno Pieters (m.w.pieters@twi.tudelft.nl)
battery.zip 26623 1998/01/26 Battery charge monitor
Runs on: OS/2 v3.0, 4.0
Contact: Tim N. Tashpulatov (tim@chance.ru)
veridata.zip 28311 1995/04/13 Notebook power utilities (req. emxrt.zip)
apmhere.zip 6546 1995/01/30 Advanced Power Management support detection
utility