bkupsmon007r4.zip 114598 2008/07/16 Monitor for APC Back-UPS CS/ES (USB) v 0.07r4 Long desc: The program is intended for tracking a condition of a uninterruptable power supply (UPS) of series APC Back-UPS CS and Back-UPS ES (testing for other UPSes was not made!), connected by means of a standard USB-cable (part number 940- 0127B), and also for deenergizing a computer in case of switching-off of power supplies. Runs on: OS/2 Warp, eComStation Requires: USB 1.1 Expanded Control Driver (usbecd10.zip, http://hobbes.nmsu.edu/cgi- bin/h-search?key=USBECD&pushbutton=Search) Contact: Larin Yury (improver@rambler.ru) Source: http://apcusbm.narod.ru/index.html upsopt11.zip 625737 2008/03/18 UPS Monitor for Opti-UPS ES Series Long desc: UPS Monitor for Opti-UPS Enhanced Series (ES), tested with model 1000C. Other models in that series may be supported. Runs on: OS/2 Warp 3.0 and later, eComStation Requires: Opti-UPS Enhanced Series model 1000C, other in that series may be supported. Contact: Armin Schwarz (ASchw@att.net) Source: http://home.att.net/~LPAInfo upsopt10.zip 311290 2008/02/25 UPS Monitor for Opti-UPS ES Series Long desc: UPS Monitor for Opti-UPS Enhanced Series (ES), tested with model 1000C. Other models in that series may be supported. Runs on: OS/2 Warp 3.0 and later, eComStation Requires: Opti-UPS Enhanced Series model 1000C Contact: Armin Schwarz (ASchw@att.net) Source: http://home.att.net/~LPAInfo upsmop10.zip 330193 2008/02/25 UPS Monitor for Opti-UPS PowerES Series Long desc: UPS Monitor for Opti-UPS PowerES Series, tested with model 1400es. This model is no longer available but this UPS protocol may support other models. Runs on: OS/2 Warp 3.0 and later, eComStation Requires: Opti-UPS PowerES Series, tested with model 1400es (no longer available). Contact: Armin Schwarz (ASchw@att.net) Source: http://home.att.net/~LPAInfo upsmpw10.zip 269989 2008/02/25 UPS Monitor for Powerware UPS 5125 Long desc: UPS Monitor for Powerware UPS, tested with model 5125. Runs on: OS/2 Warp 3.0 and later, eComStation Requires: Powerware UPS model 5125 Contact: Armin Schwarz (ASchw@att.net) Source: http://home.att.net/~LPAInfo forups102.zip 1075326 2006/01/09 UPS power manager Long desc: UPS power manager, currently only works with megatec compatible UPS devices. The megatec protocol ought to support the following devices:- - Fenton Technologies models: - PowerPal L series - PowerOn - PowerPure - Effekta MI/MT/MH models (2502 cable) - PowerGuard PG-600 - PowerCom SMK- 800A, ULT-1000 - Giant Power MT650 - UNITEK ALPHA 500 IC - Unitek Alpha 1000is - SuperPower HP360, Hope-550 GPLed driver sources are provided for developing other devices. This update improves the reliability of the serial interface. Runs on: OS/2 Contact: Peter Koller (support@manglais.com) Source: http://www.manglais.com/ups/ upsdmn10.zip 161019 2005/01/07 UPS Monitor Daemon for contact closure type UPS. Long desc: UPS Monitor Daemon monitors contact closure type UPS for power fail or low battery alarm and shuts system down gracefully. VIO program using very little system resources. upsdmn09d.zip 160971 2004/06/14 UPS Monitor Daemon for contact closure type UPS. Long desc: UPS Monitor Daemon monitors contact closure type UPS for power fail or low battery alarm and shuts system down gracefully. VIO program using very little system resources. Runs on: OS/2 Warp 4, eComStation Requires: Contact closure type UPS (APC, Belkin, IBM, Tripplite, etc) Source: http://home.att.net/~LPAInfo upsdmn.zip 141973 2004/04/15 UPS Monitor Daemon for contact closure type UPS. Long desc: UPS Monitor Daemon monitors contact closure type UPS for power fail or low battery alarm and shuts system down gracefully. VIO program using very little system resources. Runs on: OS/2 Warp 4, eComStation Requires: Contact closure type UPS Source: http://home.att.net/~LPAInfo upsmonc.zip 552489 2004/02/05 UPS Monitor C v1.3 for contact closure UPS. Freeware. Long desc: UPS Monitor C (OS/2 and eComStation) supports contact closure UPS models from Tripplite, IBM, CyberPower and possibly other manufacturers. See archive for details. Runs on: OS/2 Warp 4.0 and later or eComStation Requires: Tripplite INTERNET Office, IBM Professional Office models 500 and 700, CyberPower (all models) and others. Contact: Lone Peak Automation (LPAInfo@att.net) Source: http://home.att.net/~LPAInfo/upsmonitor.html upsmonb.zip 488726 2004/02/05 UPS Monitor B v1.3 for APC Back-UPS, Back- UPS Office and Back-UPS ES. Freeware. Long desc: UPS Monitor B (OS/2 or eComStation) supports simple signaling UPS models from American Power Conversion (APC). See archive for details. Runs on: OS/2 Warp 4.0 and later or eComStation Requires: APC Back-UPS, Back-UPS Office or Back-UPS ES Contact: Lone Peak Automation (LPAInfo@att.net) Source: http://home.att.net/~LPAInfo/upsmonitor.html upsmon2.zip 573462 2004/02/05 UPS Monitor v1.3 for APC Smart-UPS, Back- UPS Pro, and other smart APC UPS. Freeware. Long desc: UPS Monitor (OS/2 and eComStation) supports smart signaling UPS models from American Power Conversion (APC). See archive for details. Runs on: OS/2 Warp 4.0 and later. eComStation Requires: APC Smart-UPS, Back-UPS Pro, other smart APC UPS Contact: Lone Peak Automation (LPAInfo@att.net) Source: http://home.att.net/~LPAInfo/upsmonitor.html pmapm010.zip 67857 2003/06/18 PMAPM Version 0.1. Include Source Code. PmApm is a Presentation Manager (PM) interface to APM/2. It allows to use the different power-down methods that are integrated in APM 1.2 on OS/2 systems: "standby", "suspend" and "poweroff". Long desc: PMAPM Version 0.1. Include Source Code - Public Domain. PmApm is a Presentation Manager (PM) interface to APM/2. It allows to use the different power-down methods that are integrated in APM 1.2 on OS/2 systems: "standby", "suspend" and "poweroff". Now Released under the GNU GPL license. Runs on: Warp 4 / eCS 1.0 or Later Requires: APM Contact: Cornelis Bockemuehl (cbockem@tiscali.ch) os2apm.zip 20883 2002/08/12 Command line interface to APM system Long desc: Utility program to issue IOCTL_POWER commands to the APM driver. Source included. Runs on: OS/2 Requires: APM installed Contact: Stephan Dahl (sdahl@get2net.dk) upsmpc2.zip 541511 2001/10/15 UPS Monitor for PowerCard v1.2 for Guardian On Board PowerCard. Long desc: UPS Monitor for PowerCard supports internal PowerCard UPS from Guardian On Board. See http://www.guardian-ups.com Runs on: OS/2 Warp 4.0 and later or eCS. Requires: PowerCard Internal UPS made by Guardian On Board. Contact: Lone Peak Automation (LPAInfo@worldnet.att.net) Source: http://home.att.net/~ASchw/upsmonitor.html apm2v14.zip 94245 2001/08/03 Advanced Power Management for OS/2 Long desc: APM/2 Version 1.40 for IBM OS/2 Warp 4. APM/2 allows you to put your workstation into APM standby, suspend or power off mode under Warp 4. I emphasize Warp 4, as only that version has the required support in APM.SYS, other system files and the Kernel to successfully process APM power off requests. However, you can force APM/2 power off to run under Warp 3 and before by the commandline option /Force (usefuly when a fixpack improves APM support). APM/2 also allows you to schedule a automatic power on, if APM level 1.2+ is detected. APM requests can also be scheduled. APM/2 is NLS enabled that allows you easily to create a translation in your national (SBCS single byte character set) language. os2v423.zip 1086589 2001/03/08 APC PowerChute Plus for OS/2 Runs on: OS/2 Warp 4 Requires: serial communications cable initapc.zip 17367 2001/02/28 Initialization code for APC UPS models Long desc: InitAPC allows the use of "PowerChute for OS/2" software using an 940-0095B cable type (aka PNP cable). Runs on: Only tested on Warp4 and WSeB. Requires: APC UPS model supporting "smart signaling", 940-0095B cable type and "PowerChute for OS/2". Contact: Antonio Sanmarti (warper at ansaro dot com) puc1.zip 17116 2001/02/02 Parallelport USV/UPS Control Long desc: Control your USV/UPS over Parallelport. OS/2 VIO Application. Requires: OS/2 Warp Contact: Denny Mleinek (denny@esa-box.de) hapm061e.zip 145596 2001/01/03 Yotogi-Hime's APM Monitor ver.0.61e (international release) Long desc: This allows you to check power status, battery remainder, etc. And also can perform APM sleep/suspend/power-off or restart system. It looks quite simple, but much better than standard WPS 'Power' object, I think :-) Runs on: Warp4 or later Requires: APM support Contact: Takayuki 'January June' Suwa (jjsuwa@sys3175.com) Source: http://www.sys3175.com/~jjsuwa/ m_upsd12.zip 13739 2000/04/04 Micro UPS Daemon v1.2 Long desc: Tiny & powerfull UPS daemon for APC BackUPS-Pro and APC SmartUPS. Runs on: OS/2 Contact: Stepan Kazakov (madded@zuko.istu.udm.ru) Source: http://zuko.istu.udm.ru/madded/m_upsd12.zip xbatt.zip 28831 2000/03/16 xbatt 1.2, battery status monitor Long desc: xbatt is an X11 client which displays the battery status of your notebook computer equiped with APM BIOS. Requires: XFree86 and EMX, Xpm Contact: Kyosuke Tokoro (NBG01720@nifty.ne.jp) Source: http://www.vector.co.jp/authors/VA000199/os2/ opsos2.zip 1669241 1999/07/27 OPTI-SAFE+ version 3.50 for OS/2 Long desc: Opti-UPS software for OS/2 Runs on: OS/2 Warp 3/4 Requires: Opti-UPS model E, ES, or PS Contact: http://www.optiups.com papos2.zip 1984130 1999/07/27 PowerAlert Plus version 10.1 for OS/2 Long desc: TrippLite UPS software for OS/2 Runs on: OS/2 Warp 3/4 Requires: TrippLite UPS (be sure to check out which models use PowerAlert Plus at their website) Contact: http://www.tripplite.com upsmon01.zip 8310 1999/01/19 APC UPS Monitor Daemon Long desc: APC UPS Monitor Daemon Runs on: Only tested on Warp 4, should work on v2.1/3 Contact: Mike Byrne (upsmon@turbolink.net) os2upsd.zip 38252 1998/01/26 OS/2 daemon for Trust UPS 400/650 Runs on: OS/2 Warp 3.0 and up Contact: Menno Pieters (m.w.pieters@twi.tudelft.nl) battery.zip 26623 1998/01/26 Battery charge monitor Runs on: OS/2 v3.0, 4.0 Contact: Tim N. Tashpulatov (tim@chance.ru) veridata.zip 28311 1995/04/13 Notebook power utilities (req. emxrt.zip) apmhere.zip 6546 1995/01/30 Advanced Power Management support detection utility