home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.tcs3.com
/
ftp.tcs3.com.tar
/
ftp.tcs3.com
/
DRIVERS
/
Network
/
3COM
/
3C5x9
/
3c5x9x.exe
/
AUTOLINK.CFG
< prev
next >
Wrap
Text File
|
1995-10-16
|
7KB
|
137 lines
;
; 3Com Corporation
; Configuring the AUTOLINK.CFG File
;
; The AutoLink configuration file (AUTOLINK.CFG) lets you customize your
; AutoLink installations. Each of the parameters are defined below.
; Read the option description for each parameter.
; KEYWORD DEFAULT VALUE DESCRIPTION
; ============= ============== =============================
CREATE_LOG_FILE YES ; Option: [Yes|No]
;
; Creates the file C:\AUTOLINK.LOG which
; contains information generated by
; AutoLink.
RUN_DIAGNOSTICS NO ; Option: [Yes|No]
;
; The Group 1 Diagnostic tests check the
; adapter's physical components and circuitry
; during the AutoLink installation.
AUTO_CONFIGURE YES ; Option: [Yes|No]
;
; Configures the adapter.
; If no CONFIGURATION_FILE is specified,
; the I/O Base Address, and Interrupt will
; be automatically configured to settings
; that do not conflict with any other device
; in the computer.
CONFIGURATION_FILE ; Options: Path and name of a configuration
; file.
;
; This optional file configures the
; adapter with the parameters saved in a
; configuration file (ex. 3C5X9.SET).
; For more information or to create the
; configuration file, refer to the
; Configuration and Diagnostic Program.
; Note: For this option to be activated,
; type in the configuration file path and
; name, and set AUTO_CONFIGURE to YES.
EDIT_CONFIG.SYS YES ; Option: [Yes|No]
;
; YES edits C:\CONFIG.SYS and saves the
; original file to C:\CONFIG.3CM.
;
; NO does not change C:\CONFIG.SYS. You
; need to manually edit the file.
EDIT_AUTOEXEC.BAT YES ; Option: [Yes|No]
;
; YES edits C:\AUTOEXEC.BAT and saves the
; original file to C:\AUTOEXEC.3CM.
;
; NO does not change C:\AUTOEXEC.BAT. You
; need to manually edit the file.
EDIT_NET.CFG YES ; Option: [Yes|No]
;
; YES edits NET.CFG and saves the original
; file to NET.3CM.
;
; NO does not change NET.CFG. You need
; to manually edit the file.
SMARTAGENT_INFO YES ; Option: [Yes|No]
;
; Adds the Transcend SmartAgent section
; into the NET.CFG file. The Transcend
; SmartAgent software is already incorporated
; into the NetWare ODI driver. Adding the
; SmartAgent section into NET.CFG lets the
; management information be customized for
; each user.
3INSTALL_FRAME_TYPE ; Options: Ethernet_802.2
; Ethernet_802.3
; Ethernet_II
; Ethernet_SNAP
;
; Default = AutoDetects 802.2 & 802.3
;
; This parameter defines the frame type that
; AutoLink will use to connect to the 3INSTALL
; account on the server. If no value is
; specified, AutoLink will first attempt to
; connect using Ethernet_802.2 and then
; Ethernet_802.3.
TARGET_DIRECTORY C:\NWCLIENT ; Options: Any designated directory.
;
; If no existing NetWare installation is
; detected, AutoLink copies the NetWare client
; software to the default directory. If AutoLink
; finds an existing NetWare client installation,
; AutoLink will install to that directory and
; this path will NOT be used.
CONNECT_TO_SERVER YES ; Option: [Yes|No]
;
; YES connects AutoLink to a 3INSTALL account
; on a server and copies the latest client
; software or custom configuration.
;
; NO installs the NetWare client software from
; this diskette and does NOT look for a server.
; For information on 3INSTALL read:
; A:\QINSTALL\SERVER\README.TXT.
PREFERRED_SERVER ; No Default
;
; Preferred server identifies which NetWare
; Server (2.x or 3.x) has the 3INSTALL account.
; For NetWare 4.x leave this parameter blank
; and use NetWare Directory Services to login
; 3INSTALL to the correct server.
; %VER3C5X9 autolink.cfg v1.0d