home *** CD-ROM | disk | FTP | other *** search
/ ftp.tcs3.com / ftp.tcs3.com.tar / ftp.tcs3.com / DRIVERS / Network / 3COM / 3C5x9 / 3c5x9x.exe / 3C5X9ENG.HLP < prev    next >
Text File  |  1994-11-28  |  46KB  |  1,155 lines

  1. 3C5X9,24,17,27,23,26,22,16,25,21,1,9,24,3,33,31,28,28,2,7,6,12,11,10,5,13
  2. 3C5X9,7,15,14,4,32,19,18,20
  3.  
  4.  ERROR 
  5.  
  6.  
  7.  Unable to locate topic.  No information was found in the help file.  
  8.  
  9.  This message appears because there is a problem in accessing the 
  10.  information in the help file.  Press [Esc] and exit the program.
  11.  Locate the original help file that came with the program.
  12.  
  13.  
  14.  About the Program
  15.  Adapter Information 
  16.  Adapter Statistics
  17.  Boot PROM
  18.  Command Line Help
  19.  Configuring the Adapter
  20.  Echo Server
  21.  EISA Configuration
  22.  Exit
  23.  File Options for Adapter Configuration
  24.  File Options for Test Results
  25.  File Options for Test Setup
  26.  Installing Network Drivers
  27.  Interrupt Request Level
  28.  I/O Base Address
  29.  Load Configuration File
  30.  Load Test Setup File
  31.  Maximum Modem Speed
  32.  Network Driver Optimization
  33.  Plug and Play Capabilities
  34.  Print Configuration Settings
  35.  Print Test Results
  36.  Print Test Setup File 
  37.  Run Tests
  38.  Save Configuration File
  39.  Save Test Results
  40.  Save Test Setup File
  41.  Select Adapter 
  42.  Technical Support
  43.  Test Definitions
  44.  Test Setup
  45.  Transceiver Type
  46.  Troubleshooting     
  47.  
  48.  About the Program
  49.  
  50.  The Configuration and Diagnostic program lets you software-configure
  51.  the installed adapters and run various levels of diagnostic tests.  
  52.  
  53.  The program is window-based and composed of dialog boxes.  To move
  54.  within the dialog boxes, you can use:
  55.  
  56.     - A mouse
  57.     - Specific keys such as [Tab] and arrow keys
  58.     - Speed keys (press [Alt]+[Highlighted Key])
  59.     - Function keys
  60.  
  61.  At the bottom of each dialog box are command buttons.  Each command 
  62.  button performs an action within the dialog box, such as saving the 
  63.  information or exiting the dialog box.  When you highlight a command 
  64.  button, it is defined at the bottom of the screen.
  65.  
  66.  For more information on any dialog box press [F1].     
  67.  
  68.  Command Buttons (for the help screens):
  69.  ---------------
  70.  <Index>:   Displays all of the help information that is available in
  71.             the program.  Scroll through the list to highlight a title 
  72.             and press [Enter] to access help information.
  73.  <Cancel>:  Exits this help screen and returns to the main window.
  74.  
  75.  Adapter Information
  76.  
  77.  This menu item lets you view specific adapter information.  Only those
  78.  settings that apply to the adapter are listed.  For example, the 
  79.  settings for an ISA adapter will differ from those of an EISA or a
  80.  Micro Channel adapter. 
  81.  
  82.  Command Buttons:
  83.  ---------------
  84.  <Cancel>:  Exits the dialog box and returns to the main window.
  85.  
  86.  Adapter Statistics
  87.  
  88.  This menu item displays the network statistics maintained by the 
  89.  adapter.  The definitions are:
  90.  
  91.  Packets transmitted:  The number of packets transmitted by the 
  92.       adapter.
  93.  
  94.  Bytes transmitted:  The number of bytes transmitted by the adapter.
  95.  
  96.  Transmit deferrals:  The number of times the adapter deferred to 
  97.       another transmitting node while waiting to transmit.  This number 
  98.       increases as other stations contend with this adapter for access
  99.       to the Ethernet.
  100.  
  101.  Packets transmitted after exactly one collision:  Collisions are a
  102.       normal occurrence on an Ethernet; however, excessive collisions
  103.       may indicate problems.  If this occurs, contact your network
  104.       administrator.
  105.  
  106.  Packets transmitted after multiple collisions:  Collisions are a
  107.       normal occurrence on an Ethernet; however, excessive collisions
  108.       may indicate problems.  If this occurs, contact your network
  109.       administrator.
  110.  
  111.  Packets not transmitted after maximum collisions:  Collisions are a 
  112.       normal occurrence on an Ethernet; however, excessive collisions 
  113.       may indicate problems.  If this occurs, contact your network 
  114.       administrator.
  115.  
  116.  Late collisions:  A late collision occurs when another node on the 
  117.       Ethernet does not properly defer once the adapter has started 
  118.       transmitting.  If a large number of late collisions occur, 
  119.       contact your network administrator.
  120.  
  121.  Packets transmitted with no CD heartbeat:  If you are using an
  122.       external transceiver, a non-zero value for this number may
  123.       mean the transceiver does not support CD (collision detect)
  124.       heartbeat, or that the transceiver is not performing properly.
  125.       Consult your network administrator.
  126.  
  127.  Packets transmitted with carrier sense loss:  This normally occurs as
  128.       a result of collisions.  For more information, refer to an 
  129.       Ethernet reference guide.
  130.  
  131.  Packets received:  The number of packets received by the adapter.
  132.  
  133.  Bytes received:  The number of bytes received by the adapter.
  134.  
  135.  Packets received with CRC error:  Each packet sent on an Ethernet
  136.       has a calculated CRC (cyclic redundancy check) appended to it.
  137.       When the packet is received, this CRC is compared against the 
  138.       calculated CRC.  A difference in the CRC indicates the packet 
  139.       was corrupted, most likely by line noise.  A large value for this 
  140.       statistic indicates noise on the network.
  141.  
  142.  Packets received with framing error:  Similar to CRC error.  A small
  143.       number of these errors may be normal.  
  144.  
  145.  Packets received with oversize error:  Oversize packets are those 
  146.       greater than 1514 bytes.  Even though such packets are
  147.       theoretically illegal under Ethernet, they do occur on certain
  148.       live Ethernet networks.
  149.  
  150.  Packets received with undersize error:  Undersize packets are those 
  151.       less than 60 bytes.  Typically these are simply collision 
  152.       fragments.  There are no problems on the network.
  153.  
  154.  Packets not received:  Packets may not be received if the 
  155.       adapter/protocol is still busy with previous packets.  Normally
  156.       the higher-level protocol will retransmit the packets with no
  157.       ill effects other than some performance degradation. 
  158.  
  159.  Command Button:
  160.  --------------
  161.  <Cancel>:  Exits the dialog box and returns to the main window.
  162.  
  163.  Boot PROM 
  164.  
  165.  NOTE:  This software option applies only to the EtherLink III
  166.  ISA and EISA adapters. 
  167.  
  168.  The boot PROM lets the computer start DOS operations through the 
  169.  network without using a local startup disk.  The Disabled setting
  170.  indicates that no boot PROM is installed or that you do not want it
  171.  active.
  172.  
  173.  The other settings are sizes of the installed boot PROM.  When you 
  174.  select a size, the boot PROM addresses appear in the second list box.
  175.  A different group of addresses appears for each size.  The base 
  176.  address specifies that portion of the computer's address space that
  177.  will be used for the boot PROM. 
  178.  
  179.  Command Line Help
  180.  
  181.  You can configure and test the adapter from the command line.  To get
  182.  help from the command line, exit this program and type:
  183.  
  184.     3C5X9CFG HELP
  185.  
  186.  You can get help information for specific commands such as RUN by 
  187.  typing:
  188.  
  189.     3C5X9CFG HELP RUN
  190.  
  191.  For more information, refer to the adapter user guide.
  192.  
  193.  Configuring the Adapter
  194.  
  195.  This menu item lets you change the configuration settings on the
  196.  selected adapter. 
  197.   
  198.  Use the arrow keys to scroll through the list of options.  To 
  199.  view all of the possible settings under each option, highlight one 
  200.  of the options and press [Enter].  Another dialog box appears for 
  201.  each separate option.  Use the arrow keys to scroll through the 
  202.  settings.  
  203.  
  204.  The available options and corresponding default settings for ISA
  205.  adapters are:
  206.  
  207.  I/O Base Address                 [300h]
  208.  Interrupt Request Level          [10]
  209.  Boot PROM                        [Disabled]
  210.  Transceiver Type                 [On-board*]
  211.  Network Driver Optimization      [DOS Client]
  212.  Maximum Modem Speed              [9600 Baud]
  213.  Plug and Play Capability**       [Enabled]
  214.  
  215.  *For 3C509, the default setting is either On-board Coax or
  216.   On-board TP depending on which adapter you are configuring.
  217.   For a Combo board, the default setting is On-board Coax.  For
  218.   3C509B, the default setting is Auto Select for all boards
  219.   except for TPO (stealth) board, which always uses On-board TP.
  220.  
  221. **For 3C509B only.
  222.  
  223.  
  224.  The available options and corresponding default settings for EISA and
  225.  MCA adapters are:
  226.  
  227.  Network Driver Optimization      [DOS Client]
  228.  Maximum Modem Speed              [9600 Baud]
  229.  
  230.  To save any changes to the adapter, press [Tab] to highlight <OK>
  231.  and press [Enter].  All setting changes are saved automatically to 
  232.  the adapter.  You can also save the settings to a file by using
  233.  the save option in the File Options dialog box.
  234.  
  235.  Command Buttons:
  236.  ---------------
  237.  <Auto Configure>:  Default action.  Press [Enter].  Auto Configure 
  238.             automatically configures the board for ISA use.
  239.             The program selects I/O Base Address, Interrupt
  240.             Request Level, and Transceiver Type settings that
  241.             will not conflict with other adapters or devices in
  242.             your computer.
  243.  <Modify>:          Use the arrow keys to highlight one of the options.  
  244.                     Press [Tab] to highlight <Modify> and press [Enter].
  245.                     A second dialog box appears with the available 
  246.                     settings for that option.
  247.  <File Options>:    Press [Tab] to highlight this command button and 
  248.                     press [Enter].  A second dialog box appears.  For
  249.                     more information on the load, save, or print
  250.                     options, press [F1] after selecting this option.
  251.  <OK>:              Saves any setting changes to the adapter.
  252.  <Cancel>:          Ends this operation and returns to the main window.
  253.  
  254.  Echo Server
  255.  
  256.  To run the Group 3 test on your adapter you need a second computer 
  257.  set up as an echo server.  The echo server receives packets from the 
  258.  adapter being tested and echoes them back.  This menu item lets you set 
  259.  up an echo server.
  260.  
  261.  The second computer must contain a 3Com adapter.  The diagnostic 
  262.  program that comes with the adapter supports the Configuration and
  263.  Diagnostic program's echo server function.  You can use any of the
  264.  adapters listed below in the echo server:
  265.  
  266.  EtherLink II or II TP
  267.  EtherLink Plus
  268.  EtherLink 16 or 16 TP
  269.  EtherLink/MC or MC TP
  270.  EtherLink/MC 32
  271.  EtherLink II/16 or II/16 TP
  272.  EtherLink III
  273.  
  274.  For specific setup information refer to the user guide that accompanied
  275.  the 3Com adapter.
  276.  
  277.  EISA Configuration
  278.  
  279.  NOTE:  This software option does not apply to the EtherLink III
  280.  EISA or Micro Channel adapters.
  281.  
  282.  The EISA configuration is an option setting under the I/O base address
  283.  in the Configure Adapter dialog box.
  284.  
  285.  Selecting the EISA setting means the adapter will behave as an EISA
  286.  adapter and will identify itself to the EISA computer for automatic
  287.  configuration. 
  288.  
  289.  CAUTION:  If you are installing the ISA adapter in an EISA computer,
  290.            you must configure the adapter for the EISA computer.  If you 
  291.            need to reinstall the adapter in an ISA computer, you must
  292.            reconfigure the adapter BEFORE you physically install it in
  293.            the ISA computer.
  294.  
  295.  For instructions on configuring the EISA adapter or reconfiguring the 
  296.  adapter for an ISA computer, refer to the adapter user guide.
  297.  
  298.  Exit
  299.  
  300.  To exit the program you can do one of the following:
  301.  
  302.     -  Go to the Quit menu, highlight Exit, and press [Enter].
  303.  
  304.     -  Press [F3] while in the main window.
  305.  
  306.     -  Press [Esc] while in the main window.  A dialog box appears
  307.        asking if you want to quit the program.  The default response 
  308.        is <OK>, and it is already highlighted.  Press [Enter].
  309.  
  310.  File Options for Adapter Configuration
  311.  
  312.  This dialog box lets you load, save, and print the adapter 
  313.  configuration file.  Highlight one of the File Options command buttons 
  314.  and press [Enter].  Another dialog box appears.
  315.  
  316.  Command Buttons:
  317.  ---------------
  318.  <Load>:    Loads a previously saved configuration file, and changes the
  319.             current configuration to that in the file.  
  320.  <Save>:    Saves the adapter's currently displayed software 
  321.             configuration settings to a file. 
  322.  <Print>:   Prints the configuration information currently displayed
  323.             on the screen.
  324.  <Cancel>:  Ends this operation and returns to the previous dialog box.
  325.  
  326.  File Options for Test Results
  327.  
  328.  This dialog box lets you save and print the current adapter's
  329.  diagnostic test results.  Highlight one of the File Options command 
  330.  buttons and press [Enter].  Another dialog box appears. 
  331.  
  332.  Command Buttons:
  333.  ---------------
  334.  <Save>:    Saves your diagnostic test results to a file.
  335.  <Print>:   Prints the diagnostic test results.
  336.  <Cancel>:  Ends this operation and returns to the previous dialog
  337.             box.
  338.  
  339.  File Options for Test Setup
  340.  
  341.  This dialog box lets you load, save, and print the adapter's diagnostic 
  342.  test setup file.  Highlight one of the File Options command buttons and 
  343.  press [Enter].  Another dialog box appears.
  344.  
  345.  Command Buttons:
  346.  ---------------
  347.  <Load>:    Loads a previously saved test setup file.  The test 
  348.             configuration previously saved can be run on the installed 
  349.             adapter.
  350.  <Save>:    Saves the test setup selections currently displayed on the 
  351.             screen to a file.  
  352.  <Print>:   Prints the test setup currently displayed on the screen. 
  353.  <Cancel>:  Ends this operation and returns to the previous dialog box.
  354.  
  355.  Installing Network Drivers
  356.  
  357.  The EtherDisk diskette contains the network drivers for the adapter.  
  358.  The utility program that automatically installs the drivers is accessed 
  359.  through the EtherDisk main menu.  Exit this program to return to the 
  360.  main menu of the EtherDisk diskette.
  361.  
  362.  Interrupt Request Level
  363.  
  364.  NOTE:  This software option applies only to the EtherLink III ISA
  365.  adapters.
  366.  
  367.  This option specifies the interrupt request level that is used by the
  368.  adapter for communication between the adapter and the computer.  The
  369.  interrupt request level is the communications channel through which a 
  370.  device issues interrupts to the interrupt handler of your computer.  
  371.  Make sure that no other device is using the same setting.
  372.  
  373.  I/O Base Address
  374.  
  375.  NOTE:  This software option applies only to the EtherLink III
  376.  ISA adapters.
  377.  
  378.  This option specifies the portion of the computer's I/O address space
  379.  that will be used by the adapter for communications between the adapter
  380.  and the computer.  The adapter uses 16 bytes of I/O space, starting at
  381.  the I/O base address.  Make sure that no other device is using any
  382.  I/O addresses in the same range.
  383.  
  384.  If you select the EISA setting, the adapter will identify itself to 
  385.  the EISA computer for automatic configuration.  In EISA mode, the
  386.  adapter uses slot-specific I/O addressing.
  387.  
  388.  Load Configuration File
  389.  
  390.  The adapter configuration file contains the option settings that were 
  391.  previously selected and saved for the adapter.  This option retrieves 
  392.  the configuration file.
  393.  
  394.  Definition of Fields:
  395.  --------------------
  396.  Filename:      Enter the adapter configuration filename.  The default 
  397.         name is 3C5X9.SET.  You can also enter *.* to list all 
  398.                 the files in a specific directory.  You can include the 
  399.                 DRIVE\PATH\FILENAME.
  400.  Directory is:  Displays the current drive and directory.
  401.  Files:         Lists all the files in the current directory.
  402.  Directories:   Lists all directories visible in the current drive and 
  403.                 all the drives on the computer.
  404.  
  405.  There are three methods available to load the configuration file.  
  406.  Once the file is loaded, the program returns to the Adapter 
  407.  Configuration dialog box.
  408.  
  409.  - Method 1:  Type in the filename in the Filename text edit box and 
  410.               press [Enter].  Your file is loaded.  
  411.  
  412.  - Method 2:  If you first need to locate the file:
  413.  
  414.               a.  Type X:*.* in the Filename text edit box, where X is 
  415.                   the drive the file is located in.  For example:  D:*.*
  416.               b.  Press [Tab] to highlight the Files list box.
  417.               c.  Use the arrow keys to highlight the file you want to 
  418.                   load.  Press [Enter].  Your file is loaded.
  419.  
  420.  - Method 3:  With the third method you are changing the directory or 
  421.               drive to locate the file.
  422.  
  423.               a.  Press [Tab] to highlight the Directories list box.
  424.               b.  Use the arrow keys to highlight the directory or drive 
  425.                   your file is located in.  Press [Enter]. 
  426.               c.  Press [Tab] to highlight the Files list box.
  427.               d.  Use the arrow keys to highlight the file you want to 
  428.                   load.  Press [Enter].  Your file is loaded. 
  429.  
  430.  Command Buttons:
  431.  ---------------
  432.  <OK>:      Default action.  Loads the adapter configuration file 
  433.             specified in the Filename text edit box.  When the operation 
  434.             is completed, the program returns to the Adapter 
  435.             Configuration dialog box.
  436.  <Cancel>:  Ends this operation and returns to the File Options dialog 
  437.             box.
  438.  
  439.  Load Test Setup File
  440.  
  441.  The test setup file contains the diagnostic test settings that were 
  442.  previously selected and saved for the adapter.  This option retrieves 
  443.  the file.  
  444.  
  445.  Definition of Fields:
  446.  --------------------
  447.  Filename:      Enter the test setup filename.  The default name is 
  448.         3C5X9.TST adapter.  You can also enter *.* to list all 
  449.                 the files in a specific directory.  You can include 
  450.                 the DRIVE\PATH\FILENAME.
  451.  Directory is:  Displays the current drive and directory.
  452.  Files:         Lists all the files in the current directory.
  453.  Directories:   Lists all directories visible in the current drive and 
  454.                 all the drives on the computer.
  455.  
  456.  There are three methods available to load the test setup file.  Once 
  457.  the file is loaded, the program returns you to the Test Setup dialog 
  458.  box. 
  459.  
  460.  - Method 1:  Type in the filename in the Filename text edit box and 
  461.               press [Enter].  Your file is loaded.  
  462.  
  463.  - Method 2:  If you first need to locate the file: 
  464.  
  465.               a.  Type X:*.* in the Filename text edit box, where X is 
  466.                   the drive the file is located in.  For example:  D:*.*
  467.               b.  Press [Tab] to highlight the Files list box.
  468.               c.  Use the arrow keys to highlight the file you want to 
  469.                   load.  Press [Enter].  Your file is loaded.
  470.           
  471.  - Method 3:  If you need to change the directory or drive to locate 
  472.               the file:
  473.  
  474.               a.  Press [Tab] to highlight the Directories list box.
  475.               b.  Use the arrow keys to highlight the directory or drive 
  476.                   the file is located in.  Press [Enter].
  477.               c.  Press [Tab] to highlight the Files list box.
  478.               d.  Use the arrow keys to highlight the file you want to 
  479.                   load.  Press [Enter].  Your file is loaded.
  480.  
  481.  To run the test setup file, go to the Run menu item.  Highlight <Start> 
  482.  and press [Enter]. 
  483.  
  484.  Command Buttons:
  485.  ---------------
  486.  <OK>:      Default action.  Loads the test setup file specified in the 
  487.             Filename text edit box.  When the operation is completed, 
  488.             the program returns to the Test Setup dialog box.
  489.  <Cancel>:  Ends this operation and returns to the File Options dialog 
  490.             box.
  491.  
  492.  Maximum Modem Speed
  493.  
  494.  Selecting a modem speed tells the adapter how long it can disable
  495.  interrupts without causing problems with the serial port.  The lower
  496.  the modem speed, the longer the adapter can keep interrupts disabled.
  497.  On slower computers, running with longer disabled interrupts can 
  498.  improve network performance.  On those computers, changing the option
  499.  setting to 2400, 1200, or No Modem may improve performance.  On faster
  500.  computers, there is little performance difference among the settings.
  501.  
  502.  If you experience problems with your modem, such as dropped characters
  503.  or excessive retries, selecting a higher option setting should help.  
  504.  If the problem is not due to the EtherLink III driver, changing the
  505.  option setting will not make a difference.
  506.  
  507.  CAUTION:  The default value (9600 baud) will work whether you have a 
  508.  modem or not, or even if the modem is slower than the default (for 
  509.  example, 2400 baud).  Do not change the default option setting unless 
  510.  you experience problems.
  511.  
  512.  If you experience compatibility problems between your adapter and 
  513.  another device in the system other than a modem, selecting a higher
  514.  option setting may help. 
  515.  
  516.  Network Driver Optimization
  517.  
  518.  This option specifies whether to optimize the network driver for a
  519.  DOS client, a Microsoft Windows or IBM OS/2 client, or a server 
  520.  environment.  Changing this option to match your system may improve 
  521.  the network performance.  The responsiveness of your system in
  522.  performing network tasks may also improve.  The driver will attempt 
  523.  to optimize various parameters, such as CPU utilization, to the 
  524.  environment specified.  For example, it may use a larger percentage
  525.  of the CPU under DOS in order to improve network throughput.  On a 
  526.  server this may be inappropriate, so the driver will attempt to 
  527.  minimize CPU utilization in a server environment.
  528.  
  529.  Plug and Play Capabilities
  530.  
  531.  Enabling the Plug and Play Capabilities will use the ISA Plug and
  532.  Play method to discover and configure the 3C509B card.  If disabled,
  533.  the old contention test will be used to discover the 3C509B card. 
  534.  
  535.  Print Configuration Settings
  536.  
  537.  To print a copy of the currently displayed configuration settings, use 
  538.  the arrow keys to select the appropriate printer port and printer type.
  539.  
  540.  To print more than one copy, press [Tab] to access the Copies box.  
  541.  Type in the number of copies you want to print, up to a maximum of 99 
  542.  copies.
  543.  
  544.  To print the settings previously saved to a file, load the file so that 
  545.  the settings are the current ones displayed on the screen and then 
  546.  print.
  547.  
  548.  Command Buttons:
  549.  ---------------
  550.  <OK>:      Default action.  Prints the displayed adapter configuration 
  551.             settings.  When the operation is completed, the program 
  552.             returns to the Adapter Configuration dialog box.
  553.  <Cancel>:  Ends this operation and returns to the File Options dialog 
  554.             box.
  555.  
  556.  Print Test Results
  557.  
  558.  To print a copy of the diagnostic test results, use the arrow keys to
  559.  select the appropriate printer port and printer type.
  560.  
  561.  To print more than one copy, press [Tab] to access the Copies box.  
  562.  Type in the number of copies you want to print, up to a maximum of 99 
  563.  copies.
  564.  
  565.  Command Buttons:
  566.  ---------------
  567.  <OK>:      Default action.  Prints the adapter diagnostic test 
  568.             results.  When the operation is completed, the program 
  569.             returns to the Run dialog box.
  570.  <Cancel>:  Ends this operation and returns to the File Options 
  571.             dialog box.     
  572.  
  573.  Print Test Setup File
  574.  
  575.  To print a copy of the currently displayed diagnostic test setup, use
  576.  the arrow keys to select the appropriate printer port and printer 
  577.  type.
  578.  
  579.  To print more than one copy, press [Tab] to access the Copies box.  
  580.  Type in the number of copies you want to print, up to a maximum of 99 
  581.  copies.  
  582.  
  583.  Command Buttons:
  584.  ---------------
  585.  <OK>:      Default action.  Prints the adapter diagnostic test 
  586.             settings.  When the operation is completed, the program 
  587.             returns to the Test Setup dialog box.
  588.  <Cancel>:  Ends this operation and returns to the File Options dialog
  589.             box.
  590.  
  591.  Run Tests
  592.  
  593.  This menu item displays the current status of the diagnostic tests.  
  594.  Use the command buttons to start or stop (abort) any of the test groups.
  595.  
  596.  Definition of Fields:
  597.  --------------------
  598.  Test Results.  Displays the diagnostic test results for the selected 
  599.  adapter.  Each line in the list box contains:
  600.  
  601.     - The test name
  602.     - The number of times the test was completed
  603.     - The results of the test
  604.  
  605.  The test results field can change as the tests are run.  The value of 
  606.  the test results field is one of the following:
  607.  
  608.     - Not Tested:  the test was not run
  609.     - Passed:  the adapter passed the test
  610.     - !Failed:  the adapter failed the test 
  611.     - DISABLED:  the test was not selected 
  612.  
  613.  Diagnostic Tests Status.  The responses to the current status of the 
  614.  diagnostic tests include:
  615.        
  616.     - Waiting for <Start>
  617.     - Completed Successfully
  618.     - Testing Halted
  619.     - Error-Halted
  620.     - Completed with Error
  621.     - Testing in Progress
  622.     - No Tests Are Enabled
  623.  
  624.  Command Buttons:
  625.  ---------------
  626.  <Start>:         Begins the diagnostic tests. 
  627.  <Continue>:      Restarts the diagnostic tests without resetting the
  628.                   counters.  
  629.  <Halt>:          Stops the tests that are currently running.   
  630.  <Test Setup>:    Accesses the Test Setup dialog box, but only if the 
  631.                   the diagnostic tests are not being run.
  632.  <Zoom>:          Lists a test, the number of times the test completed 
  633.                   successfully, the number of times the test failed, and 
  634.                   the reasons it failed.
  635.  <Stat>:          Lists the adapter's statistics.  You can only access 
  636.                   this window if the diagnostic tests are not being run.
  637.  <File Options>:  Accesses the Test Results File Options dialog box.  
  638.                   You can only access this window if the diagnostic 
  639.                   tests are not being run.
  640.  <Cancel>:        Exits this dialog box and returns to the main window.  
  641.  
  642.  Save Configuration File
  643.  
  644.  This option saves the adapter's software configuration settings to a 
  645.  file.  When this information is saved, the same configuration can be used 
  646.  on other adapters.
  647.  
  648.  Definition of Fields:
  649.  --------------------
  650.  Filename:      Type in an adapter configuration filename.  
  651.  Directory is:  Displays the current drive and directory.
  652.  Directories:   Lists all directories visible in the current drive and 
  653.                 all of the drives on the computer.  
  654.  
  655.  To save the configuration settings, type in a filename in the Filename 
  656.  text edit box and press [Enter].  The filename can be up to eight 
  657.  characters long.  The recommended filename extension is .SET.  The 
  658.  default name is 3C5X9.SET.  You can also type in a path and save the  
  659.  file to another directory or drive (DRIVE\PATH\FILENAME).  For example:
  660.  
  661.     D:\CONFIG\3C5X9.SET
  662.  
  663.  saves the file to the CONFIG directory in drive D.   
  664.  
  665.  Command Buttons:
  666.  ---------------
  667.  <OK>:      Default action.  Saves the file created in the Filename 
  668.             text edit box to a specified directory/drive.  When the 
  669.             operation is completed, the program returns to the Adapter 
  670.             Configuration dialog box.      
  671.  <Cancel>:  Ends this operation and returns to the File Options 
  672.             dialog box.
  673.  
  674.  Save Test Results
  675.  
  676.  This option saves the current diagnostic test results to a file.
  677.  
  678.  NOTE:    If you quit the Configuration and Diagnostic program before
  679.         saving the test results to a file, it will not be saved.
  680.  
  681.  Definition of Fields:
  682.  --------------------
  683.  Filename:      Type in a test results filename.            
  684.  Directory is:  Displays the current drive and directory.
  685.  Directories:   Lists all directories visible in the current drive and 
  686.                 all the drives on the computer.
  687.  
  688.  To save the test results, type in a filename in the Filename text 
  689.  edit box and press [Enter].  Your file will be saved to the current 
  690.  drive.  The filename can be up to eight characters long.  The 
  691.  recommended filename extension is .RPT.  The default name is 
  692.  3C5X9.RPT.  You can also type in a path and save the file to another
  693.  directory or drive (DRIVE\PATH\FILENAME).  For example:
  694.  
  695.     D:\RESULTS\3C5X9.RPT
  696.  
  697.  saves the file to the RESULTS directory in drive D.
  698.  
  699.  Command Buttons:
  700.  ---------------
  701.  <OK>:      Default action.  Saves the file created in the Filename text
  702.             edit box to the specified directory/drive.  When the 
  703.             operation is completed the program returns to the Run dialog 
  704.             box.
  705.  <Cancel>:  Ends this operation and returns to the File Options dialog 
  706.             box.
  707.  
  708.  Save Test Setup File
  709.  
  710.  This option saves the current diagnostic test setup to a file.  When 
  711.  this information is saved, the same diagnostic tests can be run on other 
  712.  adapters.
  713.  
  714.  Definition of Fields:
  715.  --------------------
  716.  Filename:      Type in a test setup filename.  
  717.  Directory is:  Displays the current drive and directory.
  718.  Directories:   Lists all directories visible in the current drive and
  719.                 all the drives on the computer.  
  720.  
  721.  To save a test setup file, type in a filename in the Filename text edit 
  722.  box and press [Enter].  The filename can be up to eight characters 
  723.  long.  The recommended extension is .TST.  The default name is 
  724.  3C5X9.TST.  You can also type in a path and save the file to another 
  725.  directory or drive (DRIVE\PATH\FILENAME).  For example:
  726.  
  727.     D:\TESTS\3C5X9.TST
  728.  
  729.  saves the file to the TESTS directory in drive D.
  730.  
  731.  Command Buttons:  
  732.  ---------------
  733.  <OK>:      Default action.  Saves the file created in the text edit 
  734.             box to the specified drive/directory.  Once the file is 
  735.             saved, the program returns to the Test Setup dialog box.
  736.  <Cancel>:  Ends this operation and returns to the File Options menu.
  737.  
  738.  Select Adapter
  739.  
  740.  The Installed Adapters dialog box appears if you have more than one 
  741.  adapter installed in your computer.  Select the adapter you want to 
  742.  configure and/or test and press [Enter].
  743.  
  744.  If you need to change your selection at any time during the program, 
  745.  go to the Select menu item and choose "Select Adapter" to access the 
  746.  Installed Adapters dialog box.
  747.  
  748.  Command Buttons:
  749.  ---------------
  750.  <Select>:  Selects the adapter you highlighted for testing and/or
  751.             configuration.
  752.  <Cancel>:  Exits the dialog box and returns to the main window.
  753.  
  754.  Technical Support
  755.  
  756.  Listed below are technical support services available for your 3Com
  757.  adapter.  Make sure that you have followed the steps listed in the
  758.  troubleshooting sections in this program and in the adapter user guide
  759.  to determine the problem. 
  760.  
  761.  Contact your 3Com network supplier first for assistance.  If you do 
  762.  not know who this is, contact your nearest 3Com sales office.  To 
  763.  find the 3Com sales office nearest you, call 1-800-NET3Com. 
  764.  
  765.  Software updates, drivers, and product information can be obtained
  766.  by accessing one of the following online services:
  767.    
  768.    - Fax service.  This service, called CardFacts, sends printed
  769.      information to your fax machine anywhere in the world.  Using
  770.      a touch-tone telephone, call (408) 727-7021.  Follow the recorded
  771.      instructions.  Document 9999 provides you with a list of current
  772.      documents.
  773.    
  774.    - Bulletin board service (BBS).  The 3Com bulletin board service 
  775.      is called "CardBoard" and can be accessed 24 hours a day.  To 
  776.      access, set your modem for 2400 or 9600 baud, 8 data-bits, 1 stop 
  777.      bit, no parity, and dial (408) 980-8204.
  778.  
  779.    - 3Com Product Information Service.  ASK3Com is a CompuServe-based
  780.      service containing patches and drivers, technical articles about
  781.      all 3Com products, and an interactive forum for technical 
  782.      questions.  To use ASK3Com, you need a CompuServe account.  Log
  783.      in to CompuServe, type GO THREECOM and press [Enter] to see the
  784.      ASK3Com main menu.
  785.  
  786.  For more information refer to the technical support appendix in the 
  787.  adapter user guide.
  788.  
  789.  Test Definitions
  790.  
  791.  GROUP 1:
  792.  -------
  793.  Group 1 tests the physical components, connectors, and circuitry
  794.  on the adapter. 
  795.  
  796.     -  The Register Access test verifies that the computer can 
  797.        access the adapter's registers correctly.
  798.  
  799.     -  The EEPROM Vital Data test verifies that the ASIC can access 
  800.        the EEPROM and checks the integrity of the nonconfigurable 
  801.        data in the EEPROM.
  802.     
  803.     -  The EEPROM Configurable Data test verifies that the ASIC can 
  804.        access the EEPROM and verifies the integrity of the 
  805.        user-configurable data in the EEPROM.
  806.    
  807.     -  The Boot PROM test verifies that the computer can access the 
  808.        boot PROM correctly and verifies the integrity of the boot PROM.  
  809.        This test is only run if the adapter configuration indicates a 
  810.        boot PROM is installed.
  811.  
  812.     -  The FIFO Built-in Self-test verifies the data integrity of the
  813.        FIFOs.
  814.  
  815.     -  The FIFO Loopback test uses the FIFO loopback mode to verify the 
  816.        correct operation of the transmit and receive FIFOs.
  817.  
  818.     -  The Interrupt test verifies that the adapter can generate 
  819.        interrupts to the computer.
  820.  
  821.     -  The Ethernet Core Loopback test verifies the adapter's ability to 
  822.        send and receive frames through the Ethernet core.
  823.  
  824.     -  The Encoder/Decoder Loopback test verifies the adapter's ability 
  825.        to send and receive frames through the encoder/decoder.
  826.  
  827.  GROUP 2:
  828.  -------
  829.  Group 2 consists of the Network Loopback test, which verifies the 
  830.  adapter's ability to transmit data over the network.  This test 
  831.  requires a loopback plug to be installed at the adapter's transceiver 
  832.  connection.  Run this test only on a coax adapter.
  833.  
  834.  GROUP 3:
  835.  -------
  836.  Group 3 consists of the Echo Exchange test, which verifies the adapter's 
  837.  ability to transmit and receive data while on the network.  The adapter 
  838.  must be connected to a network that includes an echo server.
  839.  
  840.  Test Setup
  841.  
  842.  The Test Setup menu item lets you run the diagnostic tests on the 
  843.  installed adapter.  You can use the default settings, specify the 
  844.  number of times the tests will be run, or enable/disable a test group.
  845.  
  846.  NOTE:  For specific information on the individual tests, press [Tab] 
  847.         to highlight <Index> at the bottom of this screen.  When the 
  848.         help screen list appears, highlight Test Definitions and 
  849.         press [Enter].
  850.  
  851.  Definition of Fields:
  852.  --------------------
  853.  Tests:          There are three groups of tests:
  854.  
  855.                  -  Group 1 tests the physical components, connectors,
  856.                     and circuitry on the adapter.
  857.                  -  Group 2 tests the adapter's ability to transmit 
  858.                     data over the network.
  859.                  -  Group 3 checks the adapter's ability to transmit and 
  860.                     receive data while on the network.       
  861.  
  862.  Repetitions:    Lets you specify the number of times you want to run 
  863.                  the diagnostic tests.
  864.  
  865.  Halt on Error:  Stops the program when one of the diagnostic tests 
  866.                  fails.
  867.     
  868.  To enable/disable a test group:
  869.  
  870.     1.  Press [Tab] until the Group Select dialog box is highlighted.  
  871.     2.  Scroll to the Enable Group or Disable Group command buttons 
  872.         using the arrow keys.
  873.     3.  Press [Enter] to enable or disable a test group.
  874.  
  875.         NOTE:  Individual tests can be enabled/disabled by pressing the
  876.                [Space Bar].
  877.  
  878.  There are two options available to specify the number of times the 
  879.  tests are run.  Press [Tab] to highlight the Repetitions box and follow
  880.  these steps:
  881.  
  882.     1.  The default option is highlighted in the Repetitions box.  To 
  883.         specify an exact number of times to run a test group:
  884.  
  885.         a.  Press [Tab] and the cursor will jump to [1      ] Times.  
  886.             Enter the number of times you want to run the tests (the 
  887.             maximum is four billion).
  888.         b.  Press [Tab] to highlight <OK>.  Press [Enter].  Your test 
  889.             settings have been accepted but not saved to a file.
  890.                  
  891.     2.  If you want to run a test group continuously, then:
  892.  
  893.         a.  Use the arrow keys to select Continuous in the Repetitions 
  894.             box.  Press [Tab] and an [X] appears.
  895.         b.  Press [Tab] to highlight <OK>.  Press [Enter].  Your test 
  896.             settings have been accepted but not saved to a file.
  897.  
  898.  Command Buttons:
  899.  ---------------
  900.  <Defaults>:       Returns all of the diagnostic tests to their default 
  901.                    values.
  902.  <Enable Group>:   Enables an entire test group.
  903.  <Disable Group>:  Disables an entire test group.
  904.  <File Options>:   Accesses the Test Setup File Options dialog box.
  905.  <OK>:             Updates the Test Setup window with the new settings.  
  906.                    These settings are only current while this program is 
  907.                    running.  If you exit this program, the settings will 
  908.                    go back to the default.  Go to Test Setup File 
  909.                    Options if you want to save the current test setup.
  910.  <Cancel>:         Ends the operation and does not accept any changes 
  911.                    to the diagnostic tests that have been entered.
  912.               
  913.  Transceiver Type
  914.  
  915.  NOTE:  This software option applies only to the EtherLink III
  916.  ISA adapters.
  917.  
  918.  This option lets you select the transceiver type, based on the type
  919.  of cable you are using.  With coax (BNC connector) or twisted-pair
  920.  cable (RJ-45 connector), use the on-board transceiver.  If you are
  921.  using thick coaxial cable (AUI connector), you need to select the
  922.  external transceiver option. For 3C509, you have the choices of TP,
  923.  Coax, and AUI depending on what kind of board you have.  For 3C509B,
  924.  you have one more option, the Auto Select, but which is not available
  925.  for a TPO (stealth) board.
  926.  
  927.  Troubleshooting
  928.  
  929.  If any of the diagnostic tests fail, the adapter may not be defective.  
  930.  Check the following:
  931.  
  932.     1.  Check the adapter installation by reviewing the instructions in
  933.         the adapter user guide.  Make sure that the adapter is seated
  934.         correctly in the slot.
  935.     2.  Inspect all cables and connections.  Use only IEEE certified
  936.         cabling.
  937.     3.  Make sure that your computer was booted under DOS and that no 
  938.         device drivers or memory managers are loaded.
  939.     4.  If you are running the Group 2 test, make sure that the loopback
  940.         plug is securely attached to the adapter's BNC connector or that
  941.         a properly cabled and inactive network is connected to the 
  942.         adapter.
  943.     5.  If you are running the Group 3 test, make sure that the adapter
  944.         is connected to a properly cabled and inactive network and an 
  945.         echo server is set up on the network. 
  946.     6.  Make sure that the adapter option settings are not used by any 
  947.         other adapter boards installed in the computer.
  948.     7.  Install the adapter in another slot and run the tests again.  
  949.         The slot may be defective.
  950.     8.  Replace the failed adapter with a working adapter and run the 
  951.         diagnostic tests again, using the same option settings as those
  952.         used on the failed adapter.
  953.     9.  Install the adapter in another functioning computer and run the 
  954.         tests again.  Your computer may be defective.
  955.  
  956.  If the adapter still does not function correctly, first refer to the 
  957.  adapter user guide for specific troubleshooting information.  Second, go
  958.  to the Help Index to access the Technical Support help screen or refer  
  959.  to the technical support appendix in the adapter user guide.
  960.  
  961.  
  962. <<Begin Error Information Text>>
  963. 3C5X9,11,1,2,3,4,5,6,7,8,9,10,11
  964.  
  965.  
  966.  Unable to locate topic.  No information was found in the help file.  
  967.  
  968.  This message appears because there is a problem in accessing the 
  969.  information in the help file.  Press [Esc] and exit the Configuration and
  970.  Diagnostic program.  Locate the original help file that came with the
  971.  Configuration and Diagnostic program.
  972.  
  973.  
  974. If the Register Access test failed:  
  975.  
  976.    -  Check the I/O base address setting on the adapter and make sure 
  977.       that it is not being used by another device.
  978.  
  979.    -  Make sure that the adapter is installed in the appropriate slot
  980.       (16- or 32-bit).
  981.  
  982.    -  Refer to the Troubleshooting help screen and the adapter user
  983.       guide more information.
  984.  
  985.  
  986. If the EEPROM Vital Data test failed:
  987.  
  988.    -  Check the I/O base address setting on the adapter and make sure
  989.       that it does not conflict with another device using the same 
  990.       setting.
  991.    
  992.    -  Make sure that the adapter is installed in the appropriate slot
  993.       (16- or 32-bit).
  994.  
  995.    -  Refer to the Troubleshooting help screen and the adapter user
  996.       guide more information.
  997.  
  998.  
  999. If the EEPROM Configurable Data test failed:
  1000.  
  1001.    -  Check the I/O base address setting on the adapter and make sure
  1002.       that it does not conflict with another device using the same 
  1003.       setting.
  1004.  
  1005.    -  The user-configurable data in the EEPROM may be corrupted.
  1006.       Reconfigure the adapter so that the configuration information
  1007.       is rewritten to the EEPROM. 
  1008.  
  1009.    -  Make sure that the adapter is installed in the appropriate slot
  1010.       (16- or 32-bit). 
  1011.  
  1012.    -  Refer to the Troubleshooting help screen and the adapter user
  1013.       guide more information.
  1014.  
  1015.  
  1016. If the Boot PROM test failed:
  1017.  
  1018.    -  Check the I/O base address setting on the adapter and make sure
  1019.       that it does not conflict with another device using the same 
  1020.       setting.
  1021.  
  1022.    -  Check the boot PROM base address setting on the adapter and make 
  1023.       sure that it is not being used by another device or software 
  1024.       program.
  1025.  
  1026.    -  Check the size of the boot PROM configuration.
  1027.  
  1028.    -  Make sure that the boot PROM was installed correctly.  Check 
  1029.       the installation instructions in the documentation.
  1030.  
  1031.    -  Make sure that the setting is disabled if no boot PROM is 
  1032.       installed.
  1033.    
  1034.    -  Make sure that the adapter is installed in the appropriate slot
  1035.       (16- or 32- bit).
  1036.  
  1037.    -  Refer to the Troubleshooting help screen and the adapter user
  1038.       guide for more information.
  1039.  
  1040.    -  The boot PROM is not functioning correctly.  Refer to the manual
  1041.       that accompanied the boot PROM for technical support.
  1042.  
  1043.  
  1044. If the FIFO Built-in Self-test failed:
  1045.  
  1046.    -  Check the I/O base address setting on the adapter and make sure
  1047.       that it is not being used by another device.
  1048.  
  1049.    -  Make sure that the adapter is installed in the appropriate slot
  1050.       (16- or 32-bit).
  1051.  
  1052.    -  Refer to the Troubleshooting help screen and the adapter user
  1053.       guide more information.
  1054.  
  1055.  
  1056. If the FIFO Loopback test failed:
  1057.  
  1058.    -  Check the I/O base address setting on the adapter and make sure
  1059.       that it is not being used by another device.
  1060.  
  1061.    -  Make sure that the adapter is installed in the appropriate slot
  1062.       (16- or 32-bit).
  1063.  
  1064.    -  Refer to the Troubleshooting help screen and the adapter user
  1065.       guide more information.
  1066.  
  1067.  
  1068. If the Interrupt test failed:
  1069.  
  1070.    -  Check the I/O base address setting on the adapter and make sure 
  1071.       that it is not being used by another device.
  1072.  
  1073.    -  Check the interrupt request level on the adapter and make sure 
  1074.       that it is not being used by another device.
  1075.  
  1076.    -  Make sure that the adapter is installed in the appropriate slot
  1077.       (16- or 32-bit).
  1078.  
  1079.    -  Refer to the Troubleshooting help screen and the adapter user
  1080.       guide for more information.
  1081.  
  1082.  
  1083. If the Ethernet Core Loopback test failed:
  1084.  
  1085.    -  Check the I/O base address setting on the adapter and make sure 
  1086.       that it is not being used by another device.
  1087.  
  1088.    -  Make sure that the adapter is installed in the appropriate slot
  1089.       (16- or 32-bit).
  1090.  
  1091.    -  Refer to the Troubleshooting help screen and the adapter user
  1092.       guide for more information.
  1093.  
  1094.  
  1095. If the Encoder/Decoder Loopback test failed:
  1096.  
  1097.    -  Check the I/O base address setting on the adapter and make sure 
  1098.       that it is not being used by another device.
  1099.    
  1100.    -  Make sure that the adapter is installed in the appropriate slot
  1101.       (16- or 32-bit).
  1102.  
  1103.    -  Refer to the Troubleshooting help screen and the adapter user
  1104.       guide more information.  
  1105.  
  1106.  
  1107. If the Network Loopback test failed:
  1108.  
  1109.    -  Check the I/O base address setting on the adapter and make sure 
  1110.       that it is not being used by another device.   
  1111.  
  1112.    -  Check the transceiver setting on the adapter.
  1113.  
  1114.    -  Make sure that the loopback plug is installed correctly.  
  1115.       Reinstall the plug or try a new plug.
  1116.  
  1117.    -  Make sure that the test is running on an inactive network.
  1118.  
  1119.    -  Check the adapter's connection to the network.
  1120.  
  1121.    -  Make sure that the adapter is installed in the appropriate slot
  1122.       (16- or 32-bit).
  1123.  
  1124.    -  Refer to the Troubleshooting help screen and the adapter user
  1125.       guide for more information.
  1126.  
  1127.  
  1128. If the Echo Exchange test failed:
  1129.  
  1130.    -  Check the I/O base address setting on the adapter and make sure 
  1131.       that it is not being used by another device.
  1132.  
  1133.    -  Check the transceiver setting on the adapter.
  1134.  
  1135.    -  Make sure that the test is running on an inactive network.
  1136.  
  1137.    -  Check the adapter's connection to the network.
  1138.  
  1139.    -  If you are testing a twisted-pair adapter, check the LED on
  1140.       the back of the adapter.  If it is not lit, there is a problem 
  1141.       with the loopback plug or the network.  
  1142.  
  1143.    -  Make sure that the adapter is installed in the appropriate slot
  1144.       (16- or 32-bit).
  1145.  
  1146.    -  Refer to the Troubleshooting help screen and the adapter user
  1147.       guide for more information.
  1148.  
  1149.  
  1150.  
  1151. Sudden end of file
  1152.  
  1153.  
  1154. (%VER 3C5X9 Configuration and Diagnostic English Help v3.0a)
  1155.