home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
8bitfiles.net/archives
/
archives.tar
/
archives
/
commodore-scene-files
/
Geos
/
geodos
/
GDEH_SPE.CVT
(
.txt
)
< prev
next >
Wrap
GEOS ConVerT
|
2019-04-13
|
23KB
|
534 lines
oGDeH_Special
PRG formatted GEOS file V1.0
CONVERTED WITH geoZIP V0.8
Write Image V2.0
geoWrite V2.1
`2The Menu: 'Special Functions'`
In this section you will learn all the details of
the Special Functions Menu in GeoDOS.
_____________________________________
`2A Program by:`
M. Kanet
Leonberger Stra~e 15
70839 Gerlingen
Telefon: 07156 / 23927
T-Online: 0715623927-1
`2*** Attention ***`
No e-mails via the
FUN! - Internet-GateWay!
`321NOTE: Markus Kanet no longer supports GeoDOS.
_____________________________________
`2*** End ***
`2Special Functions`
`2Table of Contents`
Topic Page
_____________________________________
`1Main Overview`
`1General Reference` 3
The 'Special Functions' Menu
^`1Quitting GeoDOS` 4
^`1Exit to DeskTop` 5
^`1Exit to BASIC` 6
^`1Starting the Help System` 7
^`1GeoDOS' Help System texts` 8
^`1GeoDOS Info` 9
The Menu 'GeoWrite'
^`1Starting GeoWrite` 10
^`1Open a GeoWrite Document` 11
^`1Print a GeoWrite Document` 12
The 'Quickstart' Menu
^`1Starting an Application` 13
^`1Open a Document` 14
^`1Print a Document` 15
^`1Start Desk Accessory` 16
^`1Start BASIC Program` 17
_____________________________________
`2*** End ***`
"GDeH_Index",02
"GDeH_Special",03
"GDeH_Special",04
"GDeH_Special",05
"GDeH_Special",06
"GDeH_Special",07
"GDeH_Special",08
"GDeH_Special",09
"GDeH_Special",10
"GDeH_Special",11
"GDeH_Special",12
"GDeH_Special",13
"GDeH_Special",14
"GDeH_Special",15
"GDeH_Special",16
"GDeH_Special",17
_Special",17
al Functions'
Exit GeoDOS, adjust
GEOS Time, etc...
`361GDeH_WorkShop` Examples of
`2General Reference`
The Special Functions Menu opens under GeoDos
with the press of the right Mouse button. If your
Mouse does not support this function, or you
are using a Joystick, then you can also open this
Menu by pressing the <RETURN> key.
`2*** END ***
1Quitting GeoDOS` 4
^`1Exit to DeskTop` 5
^`1Exit to BASIC` 6
^`1Starting the Help System` 7
^`1GeoDOS' Help System texts` 8
^`1GeoDOS Info` 9
The Menu 'GeoWrite'
^`1Starting GeoWri
`30D`40100 `2Quitting GeoDOS`
`30D`40101
Here you can exit GeoDOS. A Sub-Menu with the
following options appears:
`30D`40200 Return to the GeoDOS Main menu.
`30D`40201 (GeoDOS is continued)
`30D`40202
`30D`40300 Exit to the DeskTop.
`30D`40301 Or to another Interface if one is
`30D`40302 installed. See ^`1To the DeskTop`
`30D`40400 Exit directly to BASIC.
`30D`40401 Find other important Information in the
`30D`40402 section ^`1Exit to BASIC`
`30D`40500 Shut Down GEOS. This deactivates
`30D`40501 CMD Hard Drives, all Disk Drives and
`30D`40502 clears the computer display.
`30D`40600 Show CMD Options.
`30D`40601 A Mouse Click on this Icon opens a sub-
`30D`40602 menu where you can select partitions
with a drop arrow before all CMD drives.
If GeoDOS was started from a CMD drive then this
Options Menu lets you reset the boot partition by
clicking with the Mouse Button on the 'Open boot-
partition' button.
If you wish to change the partition on a drive then
click the roll arrow beside the drive name.
If you are using a CMD SmartMouse you can call
this Menu from the Main Menu by clicking the
middle Mouse button.
The Help System is accessible via the <F1> Key.
`2*** END ***`
"GDeH_Special",05
"GDeH_Special",06
`30D`40100 `2Exit to the DeskTop`
`30D`40101
Depending on how geoDOS was started the
program acts differently:
# If GeoDOS was started as an Application
you will return directly to the Desktop. First,
GeoDOS checks if the ^`1Reset Partition` Option
is active on the startup drive.
# If GeoDOS is installed as the Desktop a
File Selection Box is opened with all of the
available GO! - Files on the System Diskette. You
can then select from here which Desktop you
would like to return to. You must ensure that the
accompanying Desktop File is available on one of
the active disk drives. Example:
GO/DeskTop DESK_TOP and/or
128_DESKTOP
GO/DualTop DUALTOP
GO/gateWay GATEWAY
If GeoDOS does not find the accompanying file you
are requested to insert a disk with a copy of the
DeskTop. Also before leaving here GeoDOS tests
whether the option ^`1Reset Partition` is activated.
Related Topics:
^`1The GO!-Files`
^`1Installing GeoDOS as DeskTop`
`2*** END ***`
"GDeH_Special",04
"GDeH_Special",04
"GDeH_Program",04
"GDeH_Program",04
`30D`40100 `2Exit to BASIC`
`30D`40101
You leave GeoDOS and the BASIC mode of the C64
is started. Attention! No Safety Query is made!
GeoDOS was programmed on the C64. For this
purpose a special RESET Routine was developed.
It should work on all devices with different
configurations. Also, System modifications through
patches do not pose any problems here
(e.g. RAM-Process).
However, if a changed Kernal should have been
built into the C64 then it can result in some mal-
functions, including total system crashes.
With the JiffyDOS Kernal (c) CMD there have been
no problems so far. Because this Kernal is also
integrated in the RAMLink and SuperCPU there
should be no problems with these units either.
For the C128, the Standard Kernal Routine is used.
However, no warranty can be given that the
C128 BASIC will start.
`2*** END ***`
leaving here GeoDOS tests
whether the option ^`1Reset Partition` is activated.
`30D`40100 `2Calling GeoDOS Help`
`30D`40101
GeoDOS opens the System Diskette and searches
for the file 'LoadGeoHelp', the startup file for the
Help System. Moreover, geoDOS looks for the file
'GeoHelpView', the actual Help System. Should
one or both of these files be unavailable an
error message is displayed.
GeoDOS will now start the Help System. If you
leave the Help System you return directly to the
GeoDOS Main Menu.
Various GeoDOS Menus offer the option to call
the Help System via
the <F1> key
. After leaving
the Help System you are returned to the GeoDOS
Menu you were in when you pressed <F1>.
Related Topics:
^`1Configuring the Help System`
^`1Learning the Help System`
^`1The Help Texts of GeoDOS`
`2*** END ***`
"GeoHelpView.eDoc",04
"GeoHelpView.eDoc",07
"GDeH_Special",08
leaving here GeoDOS tests
whether the option ^`1Reset Partition` is activated.
`30D`40100 `2Calling GeoDOS Help`
`30D`40101 `2The Help Texts`
The GeoDOS Help System is divided into different
files. In GeoWrite Documents you will find the
following subjects:
`361GDeH_Index` Main Overview
`361GDeH_PrintGD` Printing Instructions.
`361GDeH_Install` Important Installation
References.
`361GDeH_Basics` Important Basics for GeoDOS
e.g. file selection box,
Drive box, etc...
`361GDeH_Tables` Information about the
Translation Tables.
`361GDeH_Program` Information for the
extra programs of GeoDOS
e.g. BootGD, GO/Files, etc...
`361GDeH_GeoDOS 64` GeoDOS Main Menu.
Screen Layout.
`361GDeH_CBM/Disk` Menu: 'My Computer'
Diskette Functions.
`361GDeH_CBM/File` Menu: 'My Computer'
File Functions.
`361GDeH_DOS/Disk` Menu: 'PC-DOS Computer'
Diskette Functions.
`361GDeH_DOS/File` Menu: 'PC-DOS Computer'
File Functions.
`361GDeH_Copy/Opt` Menu: 'Copy Options'
Set File Options.
`361GDeH_Copy/File` Menu: 'File Copying'
File Copying.
`361GDeH_System` Menu: 'System'
Configuring GeoDOS 64.
e.g. Color Change, etc...
`361GDeH_Special` Menu: 'Special Functions'
Exit GeoDOS, adjust
GEOS Time, etc...
`361GDeH_WorkShop` Examples of the Copying
Functions.
Files you don't need can be deleted. However,
if you delete files, you won't be able to load the
Topics from the Main Overview!
Related Topics:
^`1Configuring the Help System`
^`1Learning the Help System`
^`1The Help Texts of GeoDOS`
`2*** END ***`
"GeoHelpView.eDoc",04
"GeoHelpView.eDoc",07
"GDeH_Special",07
`30D`40100 `2GeoDOS Info`
`30D`40101
Here GeoDOS displays different information about
the Program. The Information is arranged over 6
pages which can be viewed with the 'dog-ear' in
the lower right corner.
# Page 1:
About the Program Author.
# Page 2:
Explanation of the Program functions.
# Page 3:
About this GeoDOS Version.
# Page 4:
Credits for C-128 Development Assistance.
# Page 5:
Distribution.
# Page 6:
Copyright.
You can leave the Information Window by clicking
on a blank area of the screen, on the round Icon
or on the Close button in the top left of the
Window.
`2*** END ***
Diskette Functions.
`361GDeH_C
`30D`40100 `2Menu 'GeoWrite'`
`30D`40101 `2Start Geowrite`
GeoDOS looks on all Drives A to D for a copy of
'GeoWrite'.
GeoDOS first checks on a RAM Drive and then
checks real disk drives. When the geoWrite
application is found GeoDOS exits and the
program boots.
If you would like to start GeoWrite from a
particular drive the only possible option is:
^`1Open Application`.
`2*** END ***
"GDeH_Special",13
TE: Markus Kanet no longer supports Geo
`30D`40100 `2Menu 'GeoWrite'`
`30D`40101 `2Open a Geowrite Document`
This option opens a File Selection Box listing all
available GeoWrite documents. Choose one of the
documents and GeoDOS first locates GeoWrite in
order to open that document. If the Program is
not found then an error message is displayed.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`2*** END ***
"GDeH_Basics",15
"GDeH_Basics",16
ill return back to the DeskTop or, if GeoDOS was
installed as your Desktop, you return to GeoDOS.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`30D`40100 `2Menu 'GeoWrite'`
`30D`40101 `2Print a Geowrite Document`
This option opens a File Selection Box listing all
available GeoWrite documents. Choose one of the
documents and GeoDOS first locates GeoWrite in
order to open that document. If the program can't
be located then an error message is displayed.
After 'GeoWrite' opens with your document the
dialog box appears to adjust the print options.
If you click on the 'OK' Icon the document will
be printed. If you click on the 'CANCEL' Icon you
will return back to the DeskTop or, if GeoDOS was
installed as your Desktop, you return to GeoDOS.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`2*** END ***
"GDeH_Basics",15
"GDeH_Basics",16
Diskette Functions.
`361GDeH_DOS/File` Menu: 'PC-DOS Computer'
File Functions.
`361GDeH_Copy/Opt` Menu: 'Copy Options'
Set File Options.
`361GDeH_Copy
`30D`40100 `2Menu 'QuickStart'`
`30D`40101 `2Starting an Application`
This option opens a File Selection Box listing all of
the Applications and Auto-Exec Programs.
Choose one of the Applications and GeoDOS will
open the Application.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`2*** END ***
"GDeH_Basics",15
"GDeH_Basics",16
inted. I
`30D`40100 `2Menu 'QuickStart'`
`30D`40101 `2Open a Document`
This option opens a File Selection Box listing all of
the documents. Choose one of the documents and
GeoDOS will first search for the parent application
and then open the document. If the Application
is not found an error message is displayed.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`2*** END ***
"GDeH_Basics",15
"GDeH_Basics",16
or, if GeoDOS was
installed as your Desktop, you return to GeoDOS.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`30D`40100 `2Menu 'QuickStart'`
`30D`40101 `2Print a Document`
This option opens a File Selection Box listing all of
the documents. Choose one of the documents and
GeoDOS will first locate the parent application and
then open the document. If the application is not
found an error message is displayed.
After the Application starts the print routine is
called. What occurs next depends on each individ-
ual Application.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`2*** END ***
"GDeH_Basics",15
"GDeH_Basics",16
ge Drive`
^`1The File Selection Box, Change Partition`
`30D`40100 `2Menu 'QuickStart'`
`30D`40101 `2Start Desk Accessories`
This option opens a File Selection Box listing all of
the Desk Accessories (D.A.). Select the D.A. that you
wish to start. GeoDOS then carries out a RESET and
then opens the D.A.. If you return to GeoDOS the
system colors are set first and then the Main Menu
is opened.
Related Topics:
^`1The File Selection Box, Change Drive`
^`1The File Selection Box, Change Partition`
`2*** END ***
"GDeH_Basics",15
"GDeH_Basics",16
asics",16
asics",16
asics",16
ge Drive`
^`1The File Selection Box, Change Partition`
`30D`40100 `2Menu 'QuickStart'`
`30D`40101 `2Start BASIC Program`
This routine only exists for the C64. Users of
GEOS128 can not start any BASIC programs from
here.
First, select a BASIC compatible drive. The follow-
ing drive types are permitted:
- C=1541 - CMD FD2000 / FD4000
- C=1571 - CMD HD
- C=1581 - CMD RAMlink
- RAMDrive
If you choose a CMD Drive you are then prompted
for a partition. All partitions are displayed with
their types - 1541, 1571, 1581 and Native-Mode. Select
a partition with a click of your mouse. If only one
Partition is available on the drive GeoDOS bypasses
this step.
If you select a Native-Mode Partition then GeoDOS
requests you to select a sub-directory. If no sub-
directories exist then GeoDOS skips this step.
Now a File Selection Box will appear listing all of
the BASIC Programs. Attention! GEOS Applications
and Documents do not show up here. These can't
be started from BASIC.
Select one of the programs from the list and it
will be started. Attention! GeoDOS can only load
and start Programs that are loaded from BASIC like
this: 'LOAD"NAME",dev'. GeoDOS cannot start
Assembler Programs that are started with a SYS
command or by 'LOAD "NAME",dev,1'!
`2*** END ***`
ed. However,
than won't be able to load the Topics from the
Main Overview!
Related Topics:
^`1Configuring the Help System`
^`1Learning the Help System`
`30D`40100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
`30D`40100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
`30D`40100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
`30D`40100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
0100 `2Men} 'QuickStart'`
`30D`40101 `2BASIC-Programme starten`
Diese Routine existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue
existiert nur f}r den C64. Besitzer
von GEOS128 k|nnen hier keine BASIC- Programme
starten.
W{hlen Sie zue