OS/2 Professional

home *** CD-ROM | disk | FTP | other *** search

/ OS/2 Professional / OS2PRO194.ISO / os2 / prgramer / unix / info / emacs.i04 (.txt) < prev next >

Wrap

GNU Info File | 1993-06-14 | 49KB | 842 lines

This is Info file ../info/emacs, produced by Makeinfo-1.47 from the input file emacs.tex. This file documents the GNU Emacs editor. Copyright (C) 1985, 1986, 1988 Richard M. Stallman. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled "The GNU Manifesto", "Distribution" and "GNU General Public License" are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "The GNU Manifesto", "Distribution" and "GNU General Public License" may be included in a translation approved by the author instead of in the original English. File: emacs, Node: Display Vars, Prev: Selective Display, Up: Display Variables Controlling Display ============================= This section contains information for customization only. Beginning users should skip it. The variable `mode-line-inverse-video' controls whether the mode line is displayed in inverse video (assuming the terminal supports it); `nil' means don't do so. *Note Mode Line::. If the variable `inverse-video' is non-`nil', Emacs attempts to invert all the lines of the display from what they normally are. If the variable `visible-bell' is non-`nil', Emacs attempts to make the whole screen blink when it would normally make an audible bell sound. This variable has no effect if your terminal does not have a way to make the screen blink. When you reenter Emacs after suspending, Emacs normally clears the screen and redraws the entire display. On some terminals with more than one page of memory, it is possible to arrange the termcap entry so that the `ti' and `te' strings (output to the terminal when Emacs is entered and exited, respectively) switch between pages of memory so as to use one page for Emacs and another page for other output. Then you might want to set the variable `no-redraw-on-reenter' non-`nil' so that Emacs will assume, when resumed, that the screen page it is using still contains what Emacs last wrote there. The variable `echo-keystrokes' controls the echoing of multi-character keys; its value is the number of seconds of pause required to cause echoing to start, or zero meaning don't echo at all. *Note Echo Area::. If the variable `ctl-arrow' is `nil', control characters in the buffer are displayed with octal escape sequences, all except newline and tab. Altering the value of `ctl-arrow' makes it local to the current buffer; until that time, the default value is in effect. The default is initially `t'. *Note Locals::. Normally, a tab character in the buffer is displayed as whitespace which extends to the next display tab stop position, and display tab stops come at intervals equal to eight spaces. The number of spaces per tab is controlled by the variable `tab-width', which is made local by changing it, just like `ctl-arrow'. Note that how the tab character in the buffer is displayed has nothing to do with the definition of TAB as a command. If you set the variable `selective-display-ellipses' to `nil', the three dots do not appear at the end of a line that precedes invisible lines. Then there is no visible indication of the invisible lines. This variable too becomes local automatically when set. File: emacs, Node: Search, Next: Fixit, Prev: Display, Up: Top Searching and Replacement ************************* Like other editors, Emacs has commands for searching for occurrences of a string. The principal search command is unusual in that it is "incremental"; it begins to search before you have finished typing the search string. There are also nonincremental search commands more like those of other editors. Besides the usual `replace-string' command that finds all occurrences of one string and replaces them with another, Emacs has a fancy replacement command called `query-replace' which asks interactively which occurrences to replace. * Menu: * Incremental Search:: Search happens as you type the string. * Nonincremental Search:: Specify entire string and then search. * Word Search:: Search for sequence of words. * Regexp Search:: Search for match for a regexp. * Regexps:: Syntax of regular expressions. * Search Case:: To ignore case while searching, or not. * Replace:: Search, and replace some or all matches. * Other Repeating Search:: Operating on all matches for some regexp. File: emacs, Node: Incremental Search, Next: Nonincremental Search, Prev: Search, Up: Search Incremental Search ================== An incremental search begins searching as soon as you type the first character of the search string. As you type in the search string, Emacs shows you where the string (as you have typed it so far) would be found. When you have typed enough characters to identify the place you want, you can stop. Depending on what you will do next, you may or may not need to terminate the search explicitly with an ESC first. `C-s' Incremental search forward (`isearch-forward'). `C-r' Incremental search backward (`isearch-backward'). `C-s' starts an incremental search. `C-s' reads characters from the keyboard and positions the cursor at the first occurrence of the characters that you have typed. If you type `C-s' and then `F', the cursor moves right after the first `F'. Type an `O', and see the cursor move to after the first `FO'. After another `O', the cursor is after the first `FOO' after the place where you started the search. Meanwhile, the search string `FOO' has been echoed in the echo area. The echo area display ends with three dots when actual searching is going on. When search is waiting for more input, the three dots are removed. (On slow terminals, the three dots are not displayed.) If you make a mistake in typing the search string, you can erase characters with DEL. Each DEL cancels the last character of search string. This does not happen until Emacs is ready to read another input character; first it must either find, or fail to find, the character you want to erase. If you do not want to wait for this to happen, use `C-g' as described below. When you are satisfied with the place you have reached, you can type ESC, which stops searching, leaving the cursor where the search brought it. Also, any command not specially meaningful in searches stops the searching and is then executed. Thus, typing `C-a' would exit the search and then move to the beginning of the line. ESC is necessary only if the next command you want to type is a printing character, DEL, ESC, or another control character that is special within searches (`C-q', `C-w', `C-r', `C-s' or `C-y'). Sometimes you search for `FOO' and find it, but not the one you expected to find. There was a second `FOO' that you forgot about, before the one you were looking for. In this event, type another `C-s' to move to the next occurrence of the search string. This can be done any number of times. If you overshoot, you can cancel some `C-s' characters with DEL. After you exit a search, you can search for the same string again by typing just `C-s C-s': the first `C-s' is the key that invokes incremental search, and the second `C-s' means "search again". If your string is not found at all, the echo area says `Failing I-Search'. The cursor is after the place where Emacs found as much of your string as it could. Thus, if you search for `FOOT', and there is no `FOOT', you might see the cursor after the `FOO' in `FOOL'. At this point there are several things you can do. If your string was mistyped, you can rub some of it out and correct it. If you like the place you have found, you can type ESC or some other Emacs command to "accept what the search offered". Or you can type `C-g', which removes from the search string the characters that could not be found (the `T' in `FOOT'), leaving those that were found (the `FOO' in `FOOT'). A second `C-g' at that point cancels the search entirely, returning point to where it was when the search started. If a search is failing and you ask to repeat it by typing another `C-s', it starts again from the beginning of the buffer. Repeating a failing reverse search with `C-r' starts again from the end. This is called "wrapping around". `Wrapped' appears in the search prompt once this has happened. The `C-g' "quit" character does special things during searches; just what it does depends on the status of the search. If the search has found what you specified and is waiting for input, `C-g' cancels the entire search. The cursor moves back to where you started the search. If `C-g' is typed when there are characters in the search string that have not been found--because Emacs is still searching for them, or because it has failed to find them--then the search string characters which have not been found are discarded from the search string. With them gone, the search is now successful and waiting for more input, so a second `C-g' will cancel the entire search. To search for a control character such as `C-s' or DEL or ESC, you must quote it by typing `C-q' first. This function of `C-q' is analogous to its meaning as an Emacs command: it causes the following character to be treated the way a graphic character would normally be treated in the same context. You can change to searching backwards with `C-r'. If a search fails because the place you started was too late in the file, you should do this. Repeated `C-r' keeps looking for more occurrences backwards. A `C-s' starts going forwards again. `C-r' in a search can be cancelled with DEL. If you know initially that you want to search backwards, you can use `C-r' instead of `C-s' to start the search, because `C-r' is also a key running a command (`isearch-backward') to search backward. The characters `C-y' and `C-w' can be used in incremental search to grab text from the buffer into the search string. This makes it convenient to search for another occurrence of text at point. `C-w' copies the word after point as part of the search string, advancing point over that word. Another `C-s' to repeat the search will then search for a string including that word. `C-y' is similar to `C-w' but copies all the rest of the current line into the search string. All the characters special in incremental search can be changed by setting the following variables: `search-delete-char' Character to delete from incremental search string (normally DEL). `search-exit-char' Character to exit incremental search (normally ESC). `search-quote-char' Character to quote special characters for incremental search (normally `C-q'). `search-repeat-char' Character to repeat incremental search forwards (normally `C-s'). `search-reverse-char' Character to repeat incremental search backwards (normally `C-r'). `search-yank-line-char' Character to pull rest of line from buffer into search string (normally `C-y'). `search-yank-word-char' Character to pull next word from buffer into search string (normally `C-w'). Slow Terminal Incremental Search -------------------------------- Incremental search on a slow terminal uses a modified style of display that is designed to take less time. Instead of redisplaying the buffer at each place the search gets to, it creates a new single-line window and uses that to display the line that the search has found. The single-line window comes into play as soon as point gets outside of the text that is already on the screen. When the search is terminated, the single-line window is removed. Only at this time is the window in which the search was done redisplayed to show its new value of point. The three dots at the end of the search string, normally used to indicate that searching is going on, are not displayed in slow style display. The slow terminal style of display is used when the terminal baud rate is less than or equal to the value of the variable `search-slow-speed', initially 1200. The number of lines to use in slow terminal search display is controlled by the variable `search-slow-window-lines'. 1 is its normal value. File: emacs, Node: Nonincremental Search, Next: Word Search, Prev: Incremental Search, Up: Search Nonincremental Search ===================== Emacs also has conventional nonincremental search commands, which require you to type the entire search string before searching begins. `C-s ESC STRING RET' Search for STRING. `C-r ESC STRING RET' Search backward for STRING. To do a nonincremental search, first type `C-s ESC'. This enters the minibuffer to read the search string; terminate the string with RET, and then the search is done. If the string is not found the search command gets an error. The way `C-s ESC' works is that the `C-s' invokes incremental search, which is specially programmed to invoke nonincremental search if the argument you give it is empty. (Such an empty argument would otherwise be useless.) `C-r ESC' also works this way. Forward and backward nonincremental searches are implemented by the commands `search-forward' and `search-backward'. These commands may be bound to keys in the usual manner. The reason that incremental search is programmed to invoke them as well is that `C-s ESC' is the traditional sequence of characters used in Emacs to invoke nonincremental search. However, nonincremental searches performed using `C-s ESC' do not call `search-forward' right away. The first thing done is to see if the next character is `C-w', which requests a word search. *Note Word Search::. File: emacs, Node: Word Search, Next: Regexp Search, Prev: Nonincremental Search, Up: Search Word Search =========== Word search searches for a sequence of words without regard to how the words are separated. More precisely, you type a string of many words, using single spaces to separate them, and the string can be found even if there are multiple spaces, newlines or other punctuation between the words. Word search is useful in editing documents formatted by text formatters. If you edit while looking at the printed, formatted version, you can't tell where the line breaks are in the source file. With word search, you can search without having to know them. `C-s ESC C-w WORDS RET' Search for WORDS, ignoring differences in punctuation. `C-r ESC C-w WORDS RET' Search backward for WORDS, ignoring differences in punctuation. Word search is a special case of nonincremental search and is invoked with `C-s ESC C-w'. This is followed by the search string, which must always be terminated with RET. Being nonincremental, this search does not start until the argument is terminated. It works by constructing a regular expression and searching for that. *Note Regexp Search::. A backward word search can be done by `C-r ESC C-w'. Forward and backward word searches are implemented by the commands `word-search-forward' and `word-search-backward'. These commands may be bound to keys in the usual manner. The reason that incremental search is programmed to invoke them as well is that `C-s ESC C-w' is the traditional Emacs sequence of keys for word search. File: emacs, Node: Regexp Search, Next: Regexps, Prev: Word Search, Up: Search Regular Expression Search ========================= A "regular expression" ("regexp", for short) is a pattern that denotes a set of strings, possibly an infinite set. Searching for matches for a regexp is a very powerful operation that editors on Unix systems have traditionally offered. In GNU Emacs, you can search for the next match for a regexp either incrementally or not. Incremental search for a regexp is done by typing `C-M-s' (`isearch-forward-regexp'). This command reads a search string incrementally just like `C-s', but it treats the search string as a regexp rather than looking for an exact match against the text in the buffer. Each time you add text to the search string, you make the regexp longer, and the new regexp is searched for. A reverse regexp search command `isearch-backward-regexp' also exists but no key runs it. All of the control characters that do special things within an ordinary incremental search have the same function in incremental regexp search. Typing `C-s' or `C-r' immediately after starting the search retrieves the last incremental search regexp used; that is to say, incremental regexp and non-regexp searches have independent defaults. Note that adding characters to the regexp in an incremental regexp search does not make the cursor move back and start again. Perhaps it ought to; I am not sure. As it stands, if you have searched for `foo' and you add `\|bar', the search will not check for a `bar' in the buffer before the `foo'. Nonincremental search for a regexp is done by the functions `re-search-forward' and `re-search-backward'. You can invoke these with `M-x', or bind them to keys. Also, you can call `re-search-forward' by way of incremental regexp search with `C-M-s ESC'. File: emacs, Node: Regexps, Next: Search Case, Prev: Regexp Search, Up: Search Syntax of Regular Expressions ============================= Regular expressions have a syntax in which a few characters are special constructs and the rest are "ordinary". An ordinary character is a simple regular expression which matches that character and nothing else. The special characters are `$', `^', `.', `*', `+', `?', `[', `]' and `\'; no new special characters will be defined. Any other character appearing in a regular expression is ordinary, unless a `\' precedes it. For example, `f' is not a special character, so it is ordinary, and therefore `f' is a regular expression that matches the string `f' and no other string. (It does not match the string `ff'.) Likewise, `o' is a regular expression that matches only `o'. Any two regular expressions A and B can be concatenated. The result is a regular expression which matches a string if A matches some amount of the beginning of that string and B matches the rest of the string. As a simple example, we can concatenate the regular expressions `f' and `o' to get the regular expression `fo', which matches only the string `fo'. Still trivial. To do something nontrivial, you need to use one of the special characters. Here is a list of them. `. (Period)' is a special character that matches any single character except a newline. Using concatenation, we can make regular expressions like `a.b' which matches any three-character string which begins with `a' and ends with `b'. is not a construct by itself; it is a suffix, which means the preceding regular expression is to be repeated as many times as possible. In `fo*', the `*' applies to the `o', so `fo*' matches one `f' followed by any number of `o's. The case of zero `o's is allowed: `fo*' does match `f'. `*' always applies to the smallest possible preceding expression. Thus, `fo*' has a repeating `o', not a repeating `fo'. The matcher processes a `*' construct by matching, immediately, as many repetitions as can be found. Then it continues with the rest of the pattern. If that fails, backtracking occurs, discarding some of the matches of the `*'-modified construct in case that makes it possible to match the rest of the pattern. For example, matching `ca*ar' against the string `caaar', the `a*' first tries to match all three `a's; but the rest of the pattern is `ar' and there is only `r' left to match, so this try fails. The next alternative is for `a*' to match only two `a's. With this choice, the rest of the regexp matches successfully. Is a suffix character similar to `*' except that it requires that the preceding expression be matched at least once. So, for example, `ca+r' will match the strings `car' and `caaaar' but not the string `cr', whereas `ca*r' would match all three strings. Is a suffix character similar to `*' except that it can match the preceding expression either once or not at all. For example, `ca?r' will match `car' or `cr'; nothing else. `[ ... ]' `[' begins a "character set", which is terminated by a `]'. In the simplest case, the characters between the two form the set. Thus, `[ad]' matches either one `a' or one `d', and `[ad]*' matches any string composed of just `a's and `d's (including the empty string), from which it follows that `c[ad]*r' matches `cr', `car', `cdr', `caddaar', etc. Character ranges can also be included in a character set, by writing two characters with a `-' between them. Thus, `[a-z]' matches any lower-case letter. Ranges may be intermixed freely with individual characters, as in `[a-z$%.]', which matches any lower case letter or `$', `%' or period. Note that the usual special characters are not special any more inside a character set. A completely different set of special characters exists inside character sets: `]', `-' and `^'. To include a `]' in a character set, you must make it the first character. For example, `[]a]' matches `]' or `a'. To include a `-', write `---', which is a range containing only `-'. To include `^', make it other than the first character in the set. `[^ ... ]' `[^' begins a "complement character set", which matches any character except the ones specified. Thus, `[^a-z0-9A-Z]' matches all characters except letters and digits. `^' is not special in a character set unless it is the first character. The character following the `^' is treated as if it were first (`-' and `]' are not special there). Note that a complement character set can match a newline, unless newline is mentioned as one of the characters not to match. is a special character that matches the empty string, but only if at the beginning of a line in the text being matched. Otherwise it fails to match anything. Thus, `^foo' matches a `foo' which occurs at the beginning of a line. is similar to `^' but matches only at the end of a line. Thus, `xx*$' matches a string of one `x' or more at the end of a line. has two functions: it quotes the special characters (including `\'), and it introduces additional special constructs. Because `\' quotes special characters, `\$' is a regular expression which matches only `$', and `\[' is a regular expression which matches only `[', and so on. Note: for historical compatibility, special characters are treated as ordinary ones if they are in contexts where their special meanings make no sense. For example, `*foo' treats `*' as ordinary since there is no preceding expression on which the `*' can act. It is poor practice to depend on this behavior; better to quote the special character anyway, regardless of where is appears. For the most part, `\' followed by any character matches only that character. However, there are several exceptions: characters which, when preceded by `\', are special constructs. Such characters are always ordinary when encountered on their own. Here is a table of `\' constructs. specifies an alternative. Two regular expressions A and B with `\|' in between form an expression that matches anything that either A or B will match. Thus, `foo\|bar' matches either `foo' or `bar' but no other string. `\|' applies to the largest possible surrounding expressions. Only a surrounding `$ ... $' grouping can limit the grouping power of `\|'. Full backtracking capability exists to handle multiple uses of `\|'. `$ ... $' is a grouping construct that serves three purposes: 1. To enclose a set of `\|' alternatives for other operations. Thus, `$foo\|bar$x' matches either `foox' or `barx'. 2. To enclose a complicated expression for the postfix `*' to operate on. Thus, `ba$na$*' matches `bananana', etc., with any (zero or more) number of `na' strings. 3. To mark a matched substring for future reference. This last application is not a consequence of the idea of a parenthetical grouping; it is a separate feature which happens to be assigned as a second meaning to the same `$ ... $' construct because there is no conflict in practice between the two meanings. Here is an explanation of this feature: `\DIGIT' after the end of a `$ ... $' construct, the matcher remembers the beginning and end of the text matched by that construct. Then, later on in the regular expression, you can use `\' followed by DIGIT to mean "match the same text matched the DIGIT'th time by the `$ ... $' construct." The strings matching the first nine `$ ... $' constructs appearing in a regular expression are assigned numbers 1 through 9 in order that the open-parentheses appear in the regular expression. `\1' through `\9' may be used to refer to the text matched by the corresponding `$ ... $' construct. For example, `$.*$\1' matches any newline-free string that is composed of two identical halves. The `$.*$' matches the first half, which may be anything, but the `\1' that follows must match the same exact text. matches the empty string, provided it is at the beginning of the buffer. matches the empty string, provided it is at the end of the buffer. matches the empty string, provided it is at the beginning or end of a word. Thus, `\bfoo\b' matches any occurrence of `foo' as a separate word. `\bballs?\b' matches `ball' or `balls' as a separate word. matches the empty string, provided it is not at the beginning or end of a word. matches the empty string, provided it is at the beginning of a word. matches the empty string, provided it is at the end of a word. matches any word-constituent character. The editor syntax table determines which characters these are. matches any character that is not a word-constituent. `\sCODE' matches any character whose syntax is CODE. CODE is a character which represents a syntax code: thus, `w' for word constituent, `-' for whitespace, `(' for open-parenthesis, etc. *Note Syntax::. `\SCODE' matches any character whose syntax is not CODE. Here is a complicated regexp, used by Emacs to recognize the end of a sentence together with any whitespace that follows. It is given in Lisp syntax to enable you to distinguish the spaces from the tab characters. In Lisp syntax, the string constant begins and ends with a double-quote. `\"' stands for a double-quote as part of the regexp, `\\' for a backslash as part of the regexp, `\t' for a tab and `\n' for a newline. "[.?!][]\"')]*\$$\\|\t\\| \$[ \t\n]*" This contains four parts in succession: a character set matching period, `?' or `!'; a character set matching close-brackets, quotes or parentheses, repeated any number of times; an alternative in backslash-parentheses that matches end-of-line, a tab or two spaces; and a character set matching whitespace characters, repeated any number of times. File: emacs, Node: Search Case, Next: Replace, Prev: Regexps, Up: Search Searching and Case ================== All sorts of searches in Emacs normally ignore the case of the text they are searching through; if you specify searching for `FOO', then `Foo' and `foo' are also considered a match. Regexps, and in particular character sets, are included: `[aB]' would match `a' or `A' or `b' or `B'. If you do not want this feature, set the variable `case-fold-search' to `nil'. Then all letters must match exactly, including case. This is a per-buffer variable; altering the variable affects only the current buffer, but there is a default value which you can change as well. *Note Locals::. File: emacs, Node: Replace, Next: Other Repeating Search, Prev: Search Case, Up: Search Replacement Commands ==================== Global search-and-replace operations are not needed as often in Emacs as they are in other editors, but they are available. In addition to the simple `replace-string' command which is like that found in most editors, there is a `query-replace' command which asks you, for each occurrence of the pattern, whether to replace it. The replace commands all replace one string (or regexp) with one replacement string. It is possible to perform several replacements in parallel using the command `expand-region-abbrevs'. *Note Expanding Abbrevs::. * Menu: * Unconditional Replace:: Replacing all matches for a string. * Regexp Replace:: Replacing all matches for a regexp. * Replacement and Case:: How replacements preserve case of letters. * Query Replace:: How to use querying. File: emacs, Node: Unconditional Replace, Next: Regexp Replace, Prev: Replace, Up: Replace Unconditional Replacement ------------------------- `M-x replace-string RET STRING RET NEWSTRING RET' Replace every occurrence of STRING with NEWSTRING. `M-x replace-regexp RET REGEXP RET NEWSTRING RET' Replace every match for REGEXP with NEWSTRING. To replace every instance of `foo' after point with `bar', use the command `M-x replace-string' with the two arguments `foo' and `bar'. Replacement occurs only after point, so if you want to cover the whole buffer you must go to the beginning first. All occurrences up to the end of the buffer are replaced; to limit replacement to part of the buffer, narrow to that part of the buffer before doing the replacement (*note Narrowing::.). When `replace-string' exits, point is left at the last occurrence replaced. The value of point when the `replace-string' command was issued is remembered on the mark ring; `C-u C-SPC' moves back there. A numeric argument restricts replacement to matches that are surrounded by word boundaries. File: emacs, Node: Regexp Replace, Next: Replacement and Case, Prev: Unconditional Replace, Up: Replace Regexp Replacement ------------------ `replace-string' replaces exact matches for a single string. The similar command `replace-regexp' replaces any match for a specified pattern. In `replace-regexp', the NEWSTRING need not be constant. It can refer to all or part of what is matched by the REGEXP. `\&' in NEWSTRING stands for the entire text being replaced. `\D' in NEWSTRING, where D is a digit, stands for whatever matched the D'th parenthesized grouping in REGEXP. For example, M-x replace-regexp RET c[ad]+r RET \&-safe RET would replace (for example) `cadr' with `cadr-safe' and `cddr' with `cddr-safe'. M-x replace-regexp RET $c[ad]+r$-safe RET \1 RET would perform exactly the opposite replacements. To include a `\' in the text to replace with, you must give `\\'. File: emacs, Node: Replacement and Case, Next: Query Replace, Prev: Regexp Replace, Up: Replace Replace Commands and Case ------------------------- If the arguments to a replace command are in lower case, it preserves case when it makes a replacement. Thus, the command M-x replace-string RET foo RET bar RET replaces a lower case `foo' with a lower case `bar', `FOO' with `BAR', and `Foo' with `Bar'. If upper case letters are used in the second argument, they remain upper case every time that argument is inserted. If upper case letters are used in the first argument, the second argument is always substituted exactly as given, with no case conversion. Likewise, if the variable `case-replace' is set to `nil', replacement is done without case conversion. If `case-fold-search' is set to `nil', case is significant in matching occurrences of `foo' to replace; also, case conversion of the replacement string is not done. File: emacs, Node: Query Replace, Prev: Replacement and Case, Up: Replace Query Replace ------------- `M-% STRING RET NEWSTRING RET' `M-x query-replace RET STRING RET NEWSTRING RET' Replace some occurrences of STRING with NEWSTRING. `M-x query-replace-regexp RET REGEXP RET NEWSTRING RET' Replace some matches for REGEXP with NEWSTRING. If you want to change only some of the occurrences of `foo' to `bar', not all of them, then you cannot use an ordinary `replace-string'. Instead, use `M-%' (`query-replace'). This command finds occurrences of `foo' one by one, displays each occurrence and asks you whether to replace it. A numeric argument to `query-replace' tells it to consider only occurrences that are bounded by word-delimiter characters. Aside from querying, `query-replace' works just like `replace-string', and `query-replace-regexp' works just like `replace-regexp'. The things you can type when you are shown an occurrence of STRING or a match for REGEXP are: `SPC' to replace the occurrence with NEWSTRING. This preserves case, just like `replace-string', provided `case-replace' is non-`nil', as it normally is. `DEL' to skip to the next occurrence without replacing this one. `, (Comma)' to replace this occurrence and display the result. You are then asked for another input character, except that since the replacement has already been made, DEL and SPC are equivalent. You could type `C-r' at this point (see below) to alter the replaced text. You could also type `C-x u' to undo the replacement; this exits the `query-replace', so if you want to do further replacement you must use `C-x ESC' to restart (*note Repetition::.). `ESC' to exit without doing any more replacements. `. (Period)' to replace this occurrence and then exit. to replace all remaining occurrences without asking again. to go back to the location of the previous occurrence (or what used to be an occurrence), in case you changed it by mistake. This works by popping the mark ring. Only one `^' in a row is allowed, because only one previous replacement location is kept during `query-replace'. `C-r' to enter a recursive editing level, in case the occurrence needs to be edited rather than just replaced with NEWSTRING. When you are done, exit the recursive editing level with `C-M-c' and the next occurrence will be displayed. *Note Recursive Edit::. `C-w' to delete the occurrence, and then enter a recursive editing level as in `C-r'. Use the recursive edit to insert text to replace the deleted occurrence of STRING. When done, exit the recursive editing level with `C-M-c' and the next occurrence will be displayed. `C-l' to redisplay the screen and then give another answer. `C-h' to display a message summarizing these options, then give another answer. If you type any other character, the `query-replace' is exited, and the character executed as a command. To restart the `query-replace', use `C-x ESC', which repeats the `query-replace' because it used the minibuffer to read its arguments. *Note C-x ESC: Repetition. File: emacs, Node: Other Repeating Search, Prev: Replace, Up: Search Other Search-and-Loop Commands ============================== Here are some other commands that find matches for a regular expression. They all operate from point to the end of the buffer. `M-x occur' Print each line that follows point and contains a match for the specified regexp. A numeric argument specifies the number of context lines to print before and after each matching line; the default is none. The buffer `*Occur*' containing the output serves as a menu for finding the occurrences in their original context. Find an occurrence as listed in `*Occur*', position point there and type `C-c C-c'; this switches to the buffer that was searched and moves point to the original of the same occurrence. `M-x list-matching-lines' Synonym for `M-x occur'. `M-x count-matches' Print the number of matches following point for the specified regexp. `M-x delete-non-matching-lines' Delete each line that follows point and does not contain a match for the specified regexp. `M-x delete-matching-lines' Delete each line that follows point and contains a match for the specified regexp. File: emacs, Node: Fixit, Next: Files, Prev: Search, Up: Top Commands for Fixing Typos ************************* In this chapter we describe the commands that are especially useful for the times when you catch a mistake in your text just after you have made it, or change your mind while composing text on line. * Menu: * Kill Errors:: Commands to kill a batch of recently entered text. * Transpose:: Exchanging two characters, words, lines, lists... * Fixing Case:: Correcting case of last word entered. * Spelling:: Apply spelling checker to a word, or a whole file. File: emacs, Node: Kill Errors, Next: Transpose, Prev: Fixit, Up: Fixit Killing Your Mistakes ===================== `DEL' Delete last character (`delete-backward-char'). `M-DEL' Kill last word (`backward-kill-word'). `C-x DEL' Kill to beginning of sentence (`backward-kill-sentence'). The DEL character (`delete-backward-char') is the most important correction command. When used among graphic (self-inserting) characters, it can be thought of as canceling the last character typed. When your mistake is longer than a couple of characters, it might be more convenient to use `M-DEL' or `C-x DEL'. `M-DEL' kills back to the start of the last word, and `C-x DEL' kills back to the start of the last sentence. `C-x DEL' is particularly useful when you are thinking of what to write as you type it, in case you change your mind about phrasing. `M-DEL' and `C-x DEL' save the killed text for `C-y' and `M-y' to retrieve. *Note Yanking::. `M-DEL' is often useful even when you have typed only a few characters wrong, if you know you are confused in your typing and aren't sure exactly what you typed. At such a time, you cannot correct with DEL except by looking at the screen to see what you did. It requires less thought to kill the whole word and start over again. File: emacs, Node: Transpose, Next: Fixing Case, Prev: Kill Errors, Up: Fixit Transposing Text ================ `C-t' Transpose two characters (`transpose-chars'). `M-t' Transpose two words (`transpose-words'). `C-M-t' Transpose two balanced expressions (`transpose-sexps'). `C-x C-t' Transpose two lines (`transpose-lines'). The common error of transposing two characters can be fixed, when they are adjacent, with the `C-t' command (`transpose-chars'). Normally, `C-t' transposes the two characters on either side of point. When given at the end of a line, rather than transposing the last character of the line with the newline, which would be useless, `C-t' transposes the last two characters on the line. So, if you catch your transposition error right away, you can fix it with just a `C-t'. If you don't catch it so fast, you must move the cursor back to between the two transposed characters. If you transposed a space with the last character of the word before it, the word motion commands are a good way of getting there. Otherwise, a reverse search (`C-r') is often the best way. *Note Search::. `Meta-t' (`transpose-words') transposes the word before point with the word after point. It moves point forward over a word, dragging the word preceding or containing point forward as well. The punctuation characters between the words do not move. For example, `FOO, BAR' transposes into `BAR, FOO' rather than `BAR FOO,'. `C-M-t' (`transpose-sexps') is a similar command for transposing two expressions (*note Lists::.), and `C-x C-t' (`transpose-lines') exchanges lines. They work like `M-t' except in determining the division of the text into syntactic units. A numeric argument to a transpose command serves as a repeat count: it tells the transpose command to move the character (word, sexp, line) before or containing point across several other characters (words, sexps, lines). For example, `C-u 3 C-t' moves the character before point forward across three other characters. This is equivalent to repeating `C-t' three times. `C-u - 4 M-t' moves the word before point backward across four words. `C-u - C-M-t' would cancel the effect of plain `C-M-t'. A numeric argument of zero is assigned a special meaning (because otherwise a command with a repeat count of zero would do nothing): to transpose the character (word, sexp, line) ending after point with the one ending after the mark. File: emacs, Node: Fixing Case, Next: Spelling, Prev: Transpose, Up: Fixit Case Conversion =============== `M-- M-l' Convert last word to lower case. Note `Meta--' is Meta-minus. `M-- M-u' Convert last word to all upper case. `M-- M-c' Convert last word to lower case with capital initial. A very common error is to type words in the wrong case. Because of this, the word case-conversion commands `M-l', `M-u' and `M-c' have a special feature when used with a negative argument: they do not move the cursor. As soon as you see you have mistyped the last word, you can simply case-convert it and go on typing. *Note Case::. File: emacs, Node: Spelling, Prev: Fixing Case, Up: Fixit Checking and Correcting Spelling ================================ `M-$' Check and correct spelling of word (`spell-word'). `M-x spell-buffer' Check and correct spelling of each word in the buffer. `M-x spell-region' Check and correct spelling of each word in the region. `M-x spell-string' Check spelling of specified word. To check the spelling of the word before point, and optionally correct it as well, use the command `M-$' (`spell-word'). This command runs an inferior process containing the `spell' program to see whether the word is correct English. If it is not, it asks you to edit the word (in the minibuffer) into a corrected spelling, and then does a `query-replace' to substitute the corrected spelling for the old one throughout the buffer. If you exit the minibuffer without altering the original spelling, it means you do not want to do anything to that word. Then the `query-replace' is not done. `M-x spell-buffer' checks each word in the buffer the same way that `spell-word' does, doing a `query-replace' if appropriate for every incorrect word. `M-x spell-region' is similar but operates only on the region, not the entire buffer. `M-x spell-string' reads a string as an argument and checks whether that is a correctly spelled English word. It prints in the echo area a message giving the answer. File: emacs, Node: Files, Next: Buffers, Prev: Fixit, Up: Top File Handling ************* The basic unit of stored data in Unix is the "file". To edit a file, you must tell Emacs to examine the file and prepare a buffer containing a copy of the file's text. This is called "visiting" the file. Editing commands apply directly to text in the buffer; that is, to the copy inside Emacs. Your changes appear in the file itself only when you "save" the buffer back into the file. In addition to visiting and saving files, Emacs can delete, copy, rename, and append to files, and operate on file directories. * Menu: * File Names:: How to type and edit file name arguments. * Visiting:: Visiting a file prepares Emacs to edit the file. * Saving:: Saving makes your changes permanent. * Reverting:: Reverting cancels all the changes not saved. * Auto Save:: Auto Save periodically protects against loss of data. * ListDir:: Listing the contents of a file directory. * Dired:: "Editing" a directory to delete, rename, etc. the files in it. * Misc File Ops:: Other things you can do on files. File: emacs, Node: File Names, Next: Visiting, Prev: Files, Up: Files File Names ========== Most Emacs commands that operate on a file require you to specify the file name. (Saving and reverting are exceptions; the buffer knows which file name to use for them.) File names are specified using the minibuffer (*note Minibuffer::.). "Completion" is available, to make it easier to specify long file names. *Note Completion::. There is always a "default file name" which will be used if you type just RET, entering an empty argument. Normally the default file name is the name of the file visited in the current buffer; this makes it easy to operate on that file with any of the Emacs file commands. Each buffer has a default directory, normally the same as the directory of the file visited in that buffer. When Emacs reads a file name, if you do not specify a directory, the default directory is used. If you specify a directory in a relative fashion, with a name that does not start with a slash, it is interpreted with respect to the default directory. The default directory is kept in the variable `default-directory', which has a separate value in every buffer. For example, if the default file name is `/u/rms/gnu/gnu.tasks' then the default directory is `/u/rms/gnu/'. If you type just `foo', which does not specify a directory, it is short for `/u/rms/gnu/foo'. `../.login' would stand for `/u/rms/.login'. `new/foo' would stand for the filename `/u/rms/gnu/new/foo'. The command `M-x pwd' prints the current buffer's default directory, and the command `M-x cd' sets it (to a value read using the minibuffer). A buffer's default directory changes only when the `cd' command is used. A file-visiting buffer's default directory is initialized to the directory of the file that is visited there. If a buffer is made randomly with `C-x b', its default directory is copied from that of the buffer that was current at the time. The default directory actually appears in the minibuffer when the minibuffer becomes active to read a file name. This serves two purposes: it shows you what the default is, so that you can type a relative file name and know with certainty what it will mean, and it allows you to edit the default to specify a different directory. This insertion of the default directory is inhibited if the variable `insert-default-directory' is set to `nil'. Note that it is legitimate to type an absolute file name after you enter the minibuffer, ignoring the presence of the default directory name as part of the text. The final minibuffer contents may look invalid, but that is not so. *Note Minibuffer File::. `$' in a file name is used to substitute environment variables. For example, if you have used the shell command `setenv FOO rms/hacks' to set up an environment variable named `FOO', then you can use `/u/$FOO/test.c' or `/u/${FOO}/test.c' as an abbreviation for `/u/rms/hacks/test.c'. The environment variable name consists of all the alphanumeric characters after the `$'; alternatively, it may be enclosed in braces after the `$'. Note that the `setenv' command affects Emacs only if done before Emacs is started. To access a file with `$' in its name, type `$$'. This pair is converted to a single `$' at the same time as variable substitution is performed for single `$'. The Lisp function that performs the substitution is called `substitute-in-file-name'. The substitution is performed only on filenames read as such using the minibuffer.