home *** CD-ROM | disk | FTP | other *** search
/ High Voltage Shareware / high1.zip / high1 / DIR9 / TRILANG.ZIP / LANGUAGE.003 < prev    next >
Text File  |  1993-09-13  |  15KB  |  476 lines

  1. Affirmative
  2. Negative
  3. American National Standards Institute color graphics are detected!
  4. American National Standards Institute color graphics are not detected!
  5. Do you desire American National Standards Institute color graphics
  6. @X0FInput your primary and subsequent designations:
  7. @X0CApologies, but this system does not permit single-string unit designations!
  8. @X0CYou have been prevented from accessing this system! GO AWAY.
  9. @X0BGrep'ing through unit database sectors for designation: @USER@.
  10. @X0CThat designation is already activated on parallel subsystem!
  11. @X0CApologies, but a security procedure has determined@CR@ that you possess 0 access permissions for this subsystem!
  12. @X0CYour unit database sector has been designated for deletion!@CR@Please avail yourself of the Administration Unit to remain activated!
  13. @X0FInput your entry security passphrase:
  14. @X0CEntry security passphrase is invalid!
  15. @X0FPlease increment your secure entry attempt.
  16. @X0C<4 attemps are allowed. You are being disconnected from this subsystem!@CR@If you misremember your entry security passphrase,@CR@retry your login procedure under the designation GUEST@CR@with passphrase GUEST, and contact Adminstration Unit.
  17. @X0F<G>Abort,<R>etry, <N>ew Unit?
  18. @X0CApologies, but unknown unit designations != permitted on this subsystem!
  19. @X0FPlease input an entry security passphrase (<16 chars, ASCII):
  20. @X0FPlease loop and re-input entry security passphrase:
  21. @X0CApologies, but the 2 entry security passphrases do not CRC properly!
  22. @X0FPlease input a secondary designation (or re-input primary designation):
  23. @X0Cdesignation "@ALIAS@" is already assigned!
  24. @X0FIs designation "@ALIAS@" not in error
  25. @X0FInput your site location, and regional section:
  26. @X0FIs "@CITY@" not in error
  27. @X0FInput your telecom access code @PHONESTYLE@:
  28. @X0FIs code "@PHONE@" not in error?
  29. @X0FInput your incept date - MM/DD/YY:
  30. @X0FIs date "@BIRTHDATE@" not in error
  31. N
  32. No Default Protocol
  33. @X0FPlease select a data transfer protocol to use as the default:
  34. L
  35. Line Modifier
  36. F
  37. Full Screen Modifier
  38. N
  39. No Default Modifier
  40. @X0FPlease select a text information modifier to use as the default:
  41. @X0CInserting your information into system unit database...Please stand by...
  42. @X0C@FIRST@, you have exceeded your per-diem system contact ration!
  43. @X0F@CR@@CR@@FIRST@, your system contact allotment has been decremented@CR@due to a an upcoming system maintenance procedure!@CR@
  44. @X0F@CR@@CR@@FIRST@, your system contact allotment has been decremented@CR@due to a an upcoming system telecommunications procedure!@CR@
  45. @X0F@CR@@CR@Your system contact allotment has been exceeded!@CR@
  46. @X0A========================================================
  47. @X0ECommunication Subroutine         Buffered Communications
  48. @X0A--------------------------------------------------------
  49. @X0FNo buffered communications discovered.
  50. @X0BNo System information alerts are presently addressable!@CR@
  51. @X0BNo External Program information alerts are presently addressable!@CR@
  52. Addressability: Negative
  53. @X0CApologies, @FIRST@, but that information alert is not addressable.
  54. System Information Alert Menu
  55. @X0BInformation Alerts that have undergone modification since last contact:
  56. R
  57. @X0FInput InfoAlert #, <R>edisplay InfoAlert Menu, or <ENTER> For Primary Menu:
  58. @X0FInput InfoAlert # <R>edisplay InfoAlert Menu or <ENTER> For Ext.Prog. Menu:
  59. Communication Subroutine:
  60. Current Data Subroutine:
  61. <ALIAS>
  62. @X0BYou have been connected @TIMEON@ 60th(s) of an hour; @TIMELEFT@ remaining.
  63. Input Selection
  64. Primary Menu
  65. @FIRST@, the system menus are now reactivated!
  66. @FIRST@, you are currently designated for Guru mode!
  67. @FIRST@, you are currently designated for Wizard mode!  Have some coffee.
  68. @FIRST@, American National Standards Institute graphics are now activated!
  69. @FIRST@, American National Standards Institute graphics are now deactivated!
  70. @X0BThere appears to be no System Information Agenda currently addressable!
  71. Apologies, @FIRST@, but the Administration Unit is not currently addressable.
  72. Are you certain you wish to address Administration Unit registers?
  73. Addressing Administration Unit...
  74. Apologies, @FIRST@, but the Administration Unit is in a wait-state.
  75. @X0BDesignation.....:
  76. Site Location...:
  77. 2nd Designation.:
  78. TeleCom Code....:
  79. Incept Date....:
  80. First Contact...:
  81. Last Contact...:
  82. Positive Xfers..:
  83. Negative Xfers.:
  84. 1024b Units, +  :
  85. 1024b Units, - :
  86. Communications..:
  87. Modifier.......:
  88. Null
  89. Line
  90. Full Screen
  91. Contacts........:
  92. Security Access:
  93. Passphrase......:
  94. Protocol.......:
  95. Null
  96. Buffered Comms..:
  97. Do Not Query
  98. Query
  99. Subscription...:
  100. Null
  101. Addressing......:
  102. Allowable
  103. Rejected
  104. <S>ite Location
  105. S
  106. <2>nd Designation
  107. 2
  108. <P>assphrase
  109. P
  110. Telcom <C>ode
  111. C
  112. <D>efault Protocol
  113. D
  114. <M>odifier
  115. M
  116. Toggle <A>ddressing Status
  117. A
  118. Toggle <B>uffered Communications Query
  119. B
  120. <E>scape
  121. E
  122. Input Site Location, Regional Section
  123. Input your Secondary Designation:
  124. @X0CThat Designation is already assigned!
  125. Input your TeleCom Code ###-###-####:
  126. @X0ASystem Designation........: @X0E@BOARDNAME@
  127. @X0AAdministration Unit.......: @X0E@SYSOPNAME@
  128. @X0ARegistration Number.......: @X0E@REGISTRATIONNUMBER@
  129. @X0ATriBBS (R) Version........: @X0E@VERSIONNUMBER@
  130. @X0ANumber of Sybsystems......: @X0E@TOTALNODES@
  131. @X0ASubsystem Number..........: @X0E@NODE@
  132. @X0ASystem Incept Date........: @X0E@BBSSTARTDATE@
  133. @X0ANumber of Member Units....: @X0E@TOTALUSERS@
  134. @X0ANumber of Com. Subroutines: @X0E@TOTALCONFERENCES@
  135. @X0ANumber of Communications..: @X0E@TOTALMESSAGES@
  136. @X0ANumber of Data Subroutines: @X0E@TOTALFILEAREAS@
  137. Are you absolutely certain you wish to cease this contact
  138. @X0B@CR@Thank you for contacting @BOARDNAME@.
  139. You were connected for @TIMEON@ 60th(s) of an hour.
  140. You have @TIMEREMAININGFORDAY@ 60th(s) of an hour remaining today.@CR@
  141. Subsystem
  142. Polling For Contact
  143. There are no communication subroutines currently addressable!
  144. Communication Menu
  145. @X0FInput new communication subroutine:
  146. Do you wish to utilize your secondary designation
  147. Address the communication to:
  148. Address the communication to (<ENTER> for All):
  149. That unit is not registered on this system! Try <F>ind Unit.
  150. Do you want this communication flagged as PUBLIC
  151. Input the concept (<ENTER> to abort message):
  152. Communication Halted!
  153. Input the recipient unit's address:
  154. Address does not compute!
  155. Do you wish to echo this communication
  156. Communication buffered!
  157. Do you wish to utilize the full screen text modifier
  158. @X0CPress <ENTER> on a null line for the menu.
  159. <S>ave
  160. S
  161. <A>bort
  162. A
  163. Pro<c>eed
  164. C
  165. <L>ist
  166. L
  167. Remo<v>e Line
  168. V
  169. <I>nsert Line
  170. I
  171. <M>odify Line
  172. M
  173. <R>eplace Text
  174. R
  175. <U>pload Text
  176. U
  177. <Q>uote
  178. Q
  179. Are you absolutely certain
  180. Input the line designation to be removed:
  181. Not a valid line designation!
  182. This communication has filled the buffer!
  183. Input the line designation to insert the line before:
  184. Input the line designation to be modified:
  185. Input the line designation for the text transmogrification:
  186. Input the replacement <old unit;new unit>:
  187. First line to quote (<ENTER> for none):
  188. Last line to quote (<ENTER> for none):
  189. Input the data unit designation:
  190. That is not a valid data unit designation!
  191. Depress <ESC> for the text modifier menu  --  <Insert Mode>
  192. <S>ave
  193. S
  194. A<b>ort
  195. B
  196. Pro<c>eed
  197. C
  198. <A>ssistance
  199. A
  200. <U>pload Text
  201. U
  202. Append <D>ata Unit
  203. D
  204. <Q>uote
  205. Q
  206. Full screen modifier assistance is not addressable.
  207. <T>his Subroutine
  208. T
  209. <A>ll Subroutines
  210. A
  211. <Q>ueued Subroutines
  212. Q
  213. <ENTER> to Escape
  214. <R>ecent Communications
  215. R
  216. <ENTER> For Null
  217. <E>scape
  218. E
  219. This communication subroutine is null!
  220. Communication Designation
  221. <ENTER> For Examine Recent Communications
  222. <A>void Subroutine
  223. A
  224. <PVT>
  225. <PUB>
  226. <ECHO>
  227. <HAS REPs>
  228. <REC'd>
  229. <DEL'd>
  230. <PERM>
  231. Designat:
  232. Date:
  233. Reply To:
  234. Subrout.:
  235. From    :
  236. To      :
  237. Concept :
  238. Appended:
  239. <R>eply
  240. R
  241. Examine Re<p>lies
  242. P
  243. <D>esignation
  244. D
  245. <M>odify
  246. M
  247. Re<l>ocate
  248. L
  249. <C>opy
  250. C
  251. <S>ave
  252. S
  253. Rem<o>ve
  254. o
  255. Resorat<i>on
  256. I
  257. Toggle Ec<h>o
  258. H
  259. Pu<b>lic
  260. B
  261. Pri<v>ate
  262. V
  263. Toggle Per<m>anent
  264. M
  265. Do<w>nload Data Unit
  266. W
  267. <-> Prev
  268. -
  269. <+/ENTER> Next
  270. +
  271. <E>scape
  272. E
  273. Do you wish to utilize your secondary designation
  274. Communication relocated!
  275. Communication copied!
  276. Communication removed!
  277. Input the communication designation
  278. Input the data unit designation for the communication
  279. Communication restored!
  280. Communication is now PUBLIC!
  281. Communication is now PRIVATE!
  282. <L>ist Subroutine Queue
  283. L
  284. Designation of Subroutine to Toggle
  285. <ENTER> to Escape
  286. <Queued>
  287. <Not Queued>
  288. There are no data unit subroutines addressable!
  289. Data Unit Menu
  290. Input new data unit subroutine area:
  291. Input the data unit mask (<ENTER> for *.*):
  292. Input the date to list from (<ENTER> for @LASTFILECHECK@):
  293. Input the text to grep for:
  294. <P>resent Subroutine
  295. P
  296. <A>ll Subroutines
  297. A
  298. <ENTER> to Escape
  299. Grep'ing Data Unit Subroutine:
  300. Input a null line to initiate positive data unit transfer.
  301. Desigation of data unit to transfer:
  302. That is not a valid data unit designation!
  303. That data unit is already present!
  304. Please input a <21 line descriptive text.  Input a null line to cease the
  305. description.
  306. If this data unit contains a FILE_ID.DIZ or DESC.SDI unit, input a null
  307. description and the system will utilize the
  308. description unit.
  309. Begin the description with / if the data is for Administration Unit only.
  310. Not able to address data unit:
  311. is a null data unit.
  312. Processing data unit:
  313. Performing Data Unit Testing Procedures....Stand by....
  314. @FIRST@, you have been compensated
  315. 60th(s) of an hour for your
  316. 60th(s) of an hour positive transfer!
  317. @FIRST@,@CR@@CR@Because of your data unit/byte ratio,@CR@ you cannot negatively transfer any data units.
  318. Do you want to transfer the flagged data units
  319. Not addressable:
  320. Not enough time units remain to transfer:
  321. Data unit designation:
  322. (NO-EXPENSE TRANSFER)
  323. Data Unit Size:
  324. bytes, Batch Size:
  325. bytes.
  326. Est. Time:
  327. 60th(s) of an hour, Total Time:
  328. 60th(s) of an hour.
  329. Input a null line to initiate the negative transfer.
  330. Name of data unit to transfer:
  331. That data unit is already present in the batch!
  332. Data unit is not addressable!
  333. Insufficient time units to complete negative transfer!
  334. Negative transfer aborted!
  335. Discovered duplicate data unit:
  336. Discovered positively transferred data unit:
  337. Designation of the data unit to be examined:
  338. The data unit must conform to ZIP, ARJ, LZH, PAK, SDN, or ARC specifications!
  339. Unarchiving data unit.....Stand by.....
  340. Error during data unit unarchival!
  341. Analysis of
  342. Designation of the data unit to be output:
  343. Input a null line to cease archival and initiate negative transfer.
  344. Input designation of the data unit to be archived:
  345. Error during data unit archival!
  346. <L>ist Data Units
  347. L
  348. <O>utput Data Unit to Screen
  349. O
  350. <A>rchive and Xfer Data Unit(s)
  351. A
  352. <ENTER> to Escape
  353. Select protocol:
  354. <D>isconnect subsequent to transfer
  355. D
  356. <A>bort transfer
  357. A
  358. <ENTER> to proceed
  359. Initiate transfer now.  Depress Ctrl-X multiple times to abort transfer!
  360. Goodbye in 10 3600ths of an hour
  361. <D>isconnect immediately
  362. D
  363. <A>bort auto disconnection
  364. A
  365. Input designation of data unit to be removed:
  366. Are you absolutely certain you wish to remove the data unit
  367. Input designation of data unit to be relocated:
  368. Input the new data subroutine:
  369. Identical subroutine!
  370. That data unit is already present in new subroutine!
  371. Administration Unit Menu
  372. Query Menu
  373. Input Query Subroutine Designation
  374. <G>oodbye
  375. G
  376. <ENTER> for Primary Menu
  377. External Program Menu
  378. Input External Program Designation
  379. <I>nformation Alerts
  380. I
  381. <G>oodbye
  382. G
  383. <ENTER> for Primary Menu
  384. No unit is present on that subsystem!
  385. would like to address you!
  386. That unit is not addressable!
  387. That unit is engaged in a data unit transfer!
  388. That unit is engaged in communications!
  389. That unit is opertating an external program!
  390. That unit is in multi-unit addressing!
  391. That unit is queued to address subsystem:
  392. unit has entered subsystem addressing!
  393. That subsystem is currently addressing subsystem:
  394. @X0BThe unit has been queried.@CR@
  395. It may require one or more 60ths of an hour for that unit to cease current
  396. currently activities and proceed to subsystem addressing.  The system will 
  397. inform you when the other unit has entered subsystem addressing. Stand by.@CR@
  398. -=> Input EXIT <=-  at the beginning of a line to exit addressing mode.@CR@@X0F
  399. unit has been disconnected due to loss of carrier signal!
  400. unit has exited addressing chat mode!
  401. unit has entered multi-unit addressing!
  402. TeleChat is only available on systems possessing multiple subsystems!
  403. @X0ANode     Status                   Designation
  404. ----     -----------------------  ------------------------------@X0E
  405. Addressable
  406. Unaddressable
  407. Transferring Data Unit
  408. Engaging Communications
  409. Utilizing Ext. Program
  410. Adressing Multiple Units
  411. Wait-State for Subsystem:
  412. Addressing Subsystem:
  413. Null Unit on Subsystem
  414. Subsystem Designation
  415. <M>ulti-Unit
  416. M
  417. Una<d>dressable
  418. D
  419. A<d>dressable
  420. D
  421. <A>ssistance
  422. A
  423. <ENTER> for Primary Menu
  424. Addressing status flagged for:
  425. Addressing Assistance is not available.
  426. Not a valid subsystem designation!
  427. <C>ease, <P>erpetual, <ENTER> to proceed?
  428. <C>ease, <F>lag Data Units, <ENTER> to proceed?
  429. C
  430. P
  431. F
  432. Designation(s) [#,#,#,et al.] for data units to flag:
  433. Maximum number of data units flagged...Depress your choice of keys.
  434. @FIRST@,@CR@@CR@Due to your data unit/byte ratio, your@CR@security permissions have been incremented to @SECURITY@.
  435. @FIRST@,@CR@@CR@Due to your data unit/byte ratio, your@CR@security permissions have been decremented to @SECURITY@.
  436. @FIRST@,@CR@@CR@Your subscription has expired!@CR@Your security permissions have been decremented to @SECURITY@.
  437. Data Unit Integrity Examination negative! Black ICE procedures implemented!
  438. Data Unit Integrity Examination positive! Black ICE procedures aborted!
  439. Data Unit Hostile Intrusion Check positive! Black ICE procedures implemented!
  440. Data Unit Hostile Intrusion Check negative! Black ICE procedures aborted!
  441. To acknowledge this query, select <T> from the Primary Menu.
  442. Automatic Disconnect in
  443. 60th(s) of an hour!!!!!
  444. Depress your choice of keys.....
  445. Keyboard input time exceeded.
  446. The Administration Unit has rerouted to the Disk Operating System.....
  447. Depress your choice of keys to proceed.....
  448. The @user@ code is not permitted in networked subroutines.
  449. Your security permissions are not high enough to communicate with @user@.
  450. Remote Imaging Protocol Scripting Graphics are detected!
  451. You do not presently have any data units flagged!
  452. Your current batch data unit queue:
  453. Data Unit to Remove [A..Z]
  454. <ENTER> for Data Unit Menu
  455. That is not a valid selection!
  456. Input the text string (<ENTER> to abort search):
  457. Your per-diem data unit limitations do not permit the negative transfer of:
  458. That data unit would exceed your per-diem data unit limitations!
  459. Your per-diem byte limitations do not permit the negative transfer of:
  460. That data unit would exceed your per-diem byte limitations!
  461. Null Ratio!
  462. Null Limitations!
  463. is appended to this communication.  Select <D> to download data unit.
  464. Apologies, but that data unit is is not desired on this system.
  465. is Unit Security Passphrase Protected.  Please input the passphrase:
  466. That is not a correct passphrase!
  467. Alter Sub<j>ect
  468. J
  469. Alter <T>o
  470. T
  471. The current concept is:
  472. Input new subject (<ENTER> to abort alteration):
  473. The current unit is:
  474. Input new unit (<ENTER> to abort alteration):
  475. That is not a valid communication designation.
  476.