Amiga Format CD 28

home *** CD-ROM | disk | FTP | other *** search

/ Amiga Format CD 28 / amigaformatcd28.iso / -seriously_amiga- / archivers / xfx / scsi_errors.dat < prev next >

Wrap

Text File | 1998-04-27 | 7.8 KB | 254 lines

*************************************************** **** **** **** ASC and ASCQ Assignments (byte 12 and 13) **** **** **** **** from **** **** **** **** draft proposed **** **** American National Standard **** **** for information systems - **** **** **** **** SMALL COMPUTER SYSTEM INTERFACE - 2 **** **** (SCSI-2) **** **** **** **** March 9, 1990 **** **** **** *************************************************** 00 00 No additional sense information 00 01 Filemark detected 00 02 End-of-partition/medium detected 00 03 Setmark detected 00 04 Beginning-of-partition/medium detected 00 05 End-of-data detected 00 06 I/O process terminated 00 11 Audio play operation in progress 00 12 Audio play operation paused 00 13 Audio play operation successfully completed 00 14 Audio play operation stopped due to error 00 15 No current audio status to return 01 00 No index/sector signal 02 00 No seek complete 03 00 Peripheral device write fault 03 01 No write current 03 02 Excessive write errors 04 00 Logical unit not ready, cause not reportable 04 01 Logical unit is in process of becoming ready 04 02 Logical unit not ready, initializing command required 04 03 Logical unit not ready, manual intervention required 04 04 Logical unit not ready, format in progress 05 00 Logical unit does not respond to selection 06 00 No reference position found 07 00 Multiple peripheral devices selected 08 00 Logical unit communication failure 08 01 Logical unit communication time-out 08 02 Logical unit communication parity error 09 00 Track following error 09 01 Tracking servo failure 09 02 Focus servo failure 09 03 Spindle servo failure 0A 00 Error log overflow 0B 00 0C 00 Write error 0C 01 Write error recovered with auto reallocation 0C 02 Write error - auto reallocation failed 0D 00 0E 00 0F 00 10 00 ID CRC or ECC error 11 00 Unrecovered read error 11 01 Read retries exhausted 11 02 Error too long to correct 11 03 Multiple read errors 11 04 Unrecovered read error - auto reallocate failed 11 05 L-EC uncorrectable error 11 06 CIRC unrecovered error 11 07 Data resychronization error 11 08 Incomplete block read 11 09 No gap found 11 0A Miscorrected error 11 0B Unrecovered read error - recommend reassignment 11 0C Unrecovered read error - recommend rewrite the data 12 00 Address mark not found for id field 13 00 Address mark not found for data field 14 00 Recorded entity not found 14 01 Record not found 14 02 Filemark or setmark not found 14 03 End-of-data not found 14 04 Block sequence error 15 00 Random positioning error 15 01 Mechanical positioning error 15 02 Positioning error detected by read of medium 16 00 Data synchronization mark error 17 00 Recovered data with no error correction applied 17 01 Recovered data with retries 17 02 Recovered data with positive head offset 17 03 Recovered data with negative head offset 17 04 Recovered data with retries and/or CIRC applied 17 05 Recovered data using previous sector ID 17 06 Recovered data without ECC - data auto-reallocated 17 07 Recovered data without ECC - recommend reassignment 18 00 Recovered data with error correction applied 18 01 Recovered data with error correction and retries applied 18 02 Recovered data - data auto-reallocated 18 03 Recovered data with CIRC 18 04 Recovered data with LEC 18 05 Recovered data - recommend reassignment 19 00 Defect list error 19 01 Defect list not available 19 02 Defect list error in primary list 19 03 Defect list error in grown list 1A 00 Parameter list length error 1B 00 Synchronous data transfer error 1C 00 Defect list not found 1C 01 Primary defect list not found 1C 02 Grown defect list not found 1D 00 Miscompare during verify operation 1E 00 Recovered id with ECC correction 1F 00 20 00 Invalid command operation code 21 00 Logical block address out of range 21 01 Invalid element address 22 00 Illegal function (should use 20 00, 24 00, or 26 00) 23 00 24 00 Invalid field in CDB 25 00 Logical unit not supported 26 00 Invalid field in parameter list 26 01 Parameter not supported 26 02 Parameter value invalid 26 03 Threshold parameters not supported 27 00 Write protected 28 00 Not ready to ready transition (medium may have changed) 28 01 Import or export element accessed 29 00 Power on, reset, or bus device reset occurred 2A 00 Parameters changed 2A 01 Mode parameters changed 2A 02 Log parameters changed 2B 00 Copy cannot execute since host cannot disconnect 2C 00 Command sequence error 2C 01 Too many windows specified 2C 02 Invalid combination of windows specified 2D 00 Overwrite error on update in place 2E 00 2F 00 Commands cleared by another initiator 30 00 Incompatible medium installed 30 01 Cannot read medium - unknown format 30 02 Cannot read medium - incompatible format 30 03 Cleaning cartridge installed 31 00 Medium format corrupted 31 01 Format command failed 32 00 No defect spare location available 32 01 Defect list update failure 33 00 Tape length error 34 00 35 00 36 00 Ribbon, ink, or toner failure 37 00 Rounded parameter 38 00 39 00 Saving parameters not supported 3A 00 Medium not present 3B 00 Sequential positioning error 3B 01 Tape position error at beginning-of-medium 3B 02 Tape position error at end-of-medium 3B 03 Tape or electronic vertical forms unit not ready 3B 04 Slew failure 3B 05 Paper jam 3B 06 Failed to sense top-of-form 3B 07 Failed to sense bottom-of-form 3B 08 Reposition error 3B 09 Read past end of medium 3B 0A Read past beginning of medium 3B 0B Position past end of medium 3B 0C Position past beginning of medium 3B 0D Medium destination element full 3B 0E Medium source element empty 3C 00 3D 00 Invalid bits in identify message 3E 00 Logical unit has not self-configured yet 3F 00 Target operating conditions have changed 3F 01 Microcode has been changed 3F 02 Changed operating definition 3F 03 Inquiry data has changed 40 00 RAM failure (should use 40 NN) 40 NN Diagnostic failure on component NN (80H-FFH) 41 00 Data path failure (should use 40 NN) 42 00 Power-on or self-test failure (should use 40 NN) 43 00 Message error 44 00 Internal target failure 45 00 Select or reselect failure 46 00 Unsuccessful soft reset 47 00 SCSI parity error 48 00 Initiator detected error message received 49 00 Invalid message error 4A 00 Command phase error 4B 00 Data phase error 4C 00 Logical unit failed self-configuration 4D 00 4E 00 Overlapped commands attempted 4F 00 50 00 Write append error 50 01 Write append position error 50 02 Position error related to timing 51 00 Erase failure 52 00 Cartridge fault 53 00 Media load or eject failed 53 01 Unload tape failure 53 02 Medium removal prevented 54 00 SCSI to host system interface failure 55 00 System resource failure 56 00 57 00 Unable to recover table-of-contents 58 00 Generation does not exist 59 00 Updated block read 5A 00 Operator request or state change input (unspecified) 5A 01 Operator medium removal request 5A 02 Operator selected write protect 5A 03 Operator selected write permit 5B 00 LOG exception 5B 01 Threshold condition met 5B 02 LOG counter at maximum 5B 03 LOG list codes exhausted 5C 00 RPL status change 5C 01 Spindles synchronized 5C 02 Spindles not synchronized 5D 00 5E 00 5F 00 60 00 Lamp failure 61 00 Video acquisition error 61 01 Unable to acquire video 61 02 Out of focus 62 00 Scan head positioning error 63 00 End of user area encountered on this track 64 00 Illegal mode for this track 65 00 66 00 67 00 68 00 69 00 6A 00 6B 00 6C 00 6D 00 6E 00 6F 00 70 00 71 00 72 00 73 00 74 00 75 00 76 00 77 00 78 00 79 00 7A 00 7B 00 7C 00 7D 00 7E 00 7F 00