home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OpenStep 4.2
/
Openstep-4.2-Intel-User.iso
/
NextLibrary
/
PrinterTypes
/
English.lproj
/
Varityper_4200B-P.ppd
< prev
next >
Wrap
PostScript Printer Description
|
1997-03-29
|
17KB
|
467 lines
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "VT42P522.PPD"
*LanguageVersion: English
*Product: "(Varityper)"
*PSVersion: "(49.3) 3.6"
*PSVersion: "(52.2) 3.6"
*ModelName: "Varityper 4200B-P"
*NickName: "Varityper 4200B-P v49.3 or 52.2"
*% General Information and Defaults ===============
*FreeVM: "2428526"
*LanguageLevel: "1"
*Extensions: FileSystem CMYK
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: True
*FileSystem: True
*?FileSystem: "
save
statusdict /diskstatus get exec exch pop 0 eq {(False)}{(True)}ifelse = flush
restore
"
*End
*Throughput: "1"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*SetResolution 1800dpi: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot set the resolution.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
1800 statusdict /setresolution get exec
"
*End
*SetResolution 900dpi: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot set the resolution.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
900 statusdict /setresolution get exec
"
*End
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
"
*End
*% Halftone Information ===============
*ScreenFreq: "106.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "letter"
*PageSize Legal: "legal"
*PageSize Ledger: "ledger"
*PageSize Tabloid: "11x17"
*PageSize A3: "a3"
*PageSize A4: "a4"
*PageSize A5: "a5"
*PageSize ISOB5: "b5"
*PageSize Letter.Transverse: "Letter"
*PageSize A4.Transverse: "A4"
*PageSize A5.Transverse: "A5"
*PageSize ISOB5.Transverse: "B5"
*?PageSize: "
save
mark statusdict /pageparams get exec exch pop
5 dict
dup [595 420] (A5.Transverse) put
dup [709 499] (ISOB5.Transverse) put
dup [842 595] (A4.Transverse) put
dup [792 612] (Letter.Transverse) put
dup [1224 792] (Ledger) put
7 dict
dup [420 595] (A5) put
dup [499 709] (ISOB5) put
dup [612 792] (Letter) put
dup [595 842] (A4) put
dup [612 1008] (Legal) put
dup [842 1191] (A3) put
dup [792 1224] (Tabloid) put
3 -1 roll 0 eq { pop } { exch pop }ifelse
(Unknown) exch
{ exch aload pop
4 index eq exch 5 index eq and
{ exch pop exit } { pop } ifelse
} bind forall = flush cleartomark
restore
"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4"
*PageRegion A5: "a5"
*PageRegion ISOB5: "b5"
*PageRegion Letter.Transverse: "Letter"
*PageRegion A4.Transverse: "A4"
*PageRegion A5.Transverse: "A5"
*PageRegion ISOB5.Transverse: "B5"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "0 1 612 792 "
*ImageableArea Legal: "0 1 612 1008 "
*ImageableArea Ledger: "0 0 1223 792 "
*ImageableArea Tabloid: "0 1 792 1224 "
*ImageableArea A3: "0 1 842 1191 "
*ImageableArea A4: "0 1 595 842 "
*ImageableArea A5: "0 1 420 595 "
*ImageableArea ISOB5: "0 1 499 709 "
*ImageableArea Letter.Transverse: "0 0 611 792 "
*ImageableArea A4.Transverse: "0 0 594 842 "
*ImageableArea A5.Transverse: "0 0 419 595 "
*ImageableArea ISOB5.Transverse: "0 0 498 710 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension ISOB5: "499 709"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5.Transverse: "420 595"
*PaperDimension ISOB5.Transverse: "499 709"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Cassette
*InputSlot Cassette: ""
*CloseUI: *InputSlot
*DefaultOutputOrder: Normal
*% Font Information =====================
*DefaultFont: Courier
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.004)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.004)" Standard ROM
*Font Courier-Oblique: Standard "(001.004)" Standard ROM
*Font Symbol: Special "(001.003)" Special ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
{
count 1 gt
{
exch dup str 6 94 getinterval cvs
(/) print dup print (:) print exch
FontDirectory exch known
{ pop (Yes) }
{
length 6 add str 0 3 -1 roll getinterval
mark exch status
{cleartomark (Yes)}{cleartomark (No)} ifelse
} ifelse =
}
{exit} ifelse
}bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory { pop == } bind forall flush
/filenameforall where
{
pop (fonts/*)
{ dup length 6 sub 6 exch getinterval cvn == } bind
128 string filenameforall flush
} if
(*) = flush
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: Printer OK"
*Status: "PrinterError: Printer never accepted band"
*Status: "PrinterError: Printer Intensity Invalid"
*Status: "PrinterError: PrintXferBusy for too long"
*Status: "PrinterError: Printer not ready to write:unused"
*Status: "PrinterError: Fifo transfer took too long:DMABusy still"
*Status: "PrinterError: Printer Resolution Invalid"
*Status: "PrinterError: Failed printerstart:!BEG"
*Status: "PrinterError: Fifo transfer did not start:DMABusy still"
*Status: "PrinterError: Printer Hardware Error"
*Status: "PrinterError: Printer Disk Full"
*Status: "PrinterError: Printer Media Cassette Full"
*Status: "PrinterError: Printer No Takeup"
*Status: "PrinterError: Re-transmitting Page To Printer"
*Status: "PrinterError: Printer Line Length Invalid"
*Status: "PrinterError: Printer Busy with Previous Page"
*Status: "PrinterError: Default page being defined is too big"
*Status: "PrinterError: Printer Media Value Invalid"
*Status: "PrinterError: Printer Cover Open"
*Status: "PrinterError: Printer never was ready to start band:!STA"
*Status: "PrinterError: Printer not ready;printer needs attention"
*Status: "PrinterError: Printer Paper Out"
*Status: "PrinterError: Printer Disk Error"
*Status: "PrinterError: Program Load Error"
*Status: "PrinterError: Printer Leading Value Invalid"
*Status: "PrinterError: Printer Offline"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "Printer OK"
*PrinterError: "Printer never accepted band"
*PrinterError: "Printer Intensity Invalid"
*PrinterError: "PrintXferBusy for too long"
*PrinterError: "Printer not ready to write:unused"
*PrinterError: "Fifo transfer took too long:DMABusy still"
*PrinterError: "Printer Resolution Invalid"
*PrinterError: "Failed printerstart:!BEG"
*PrinterError: "Fifo transfer did not start:DMABusy still"
*PrinterError: "Printer Hardware Error"
*PrinterError: "Printer Disk Full"
*PrinterError: "Printer Media Cassette Full"
*PrinterError: "Printer No Takeup"
*PrinterError: "Re-transmitting Page To Printer"
*PrinterError: "Printer Line Length Invalid"
*PrinterError: "Printer Busy with Previous Page"
*PrinterError: "Default page being defined is too big"
*PrinterError: "Printer Media Value Invalid"
*PrinterError: "Printer Cover Open"
*PrinterError: "Printer never was ready to start band:!STA"
*PrinterError: "Printer not ready;printer needs attention"
*PrinterError: "Printer Paper Out"
*PrinterError: "Printer Disk Error"
*PrinterError: "Program Load Error"
*PrinterError: "Printer Leading Value Invalid"
*PrinterError: "Printer Offline"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.127lpi.1800dpi/127 lpi / 1800 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 127 lpi / 1800 dpi ===============================
*ColorSepScreenAngle ProcessBlack.127lpi.1800dpi/127 lpi / 1800 dpi: "45.0"
*ColorSepScreenAngle CustomColor.127lpi.1800dpi/127 lpi / 1800 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.127lpi.1800dpi/127 lpi / 1800 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.127lpi.1800dpi/127 lpi / 1800 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.127lpi.1800dpi/127 lpi / 1800 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.127lpi.1800dpi/127 lpi / 1800 dpi: "127.279"
*ColorSepScreenFreq CustomColor.127lpi.1800dpi/127 lpi / 1800 dpi: "127.279"
*ColorSepScreenFreq ProcessCyan.127lpi.1800dpi/127 lpi / 1800 dpi: "113.842"
*ColorSepScreenFreq ProcessMagenta.127lpi.1800dpi/127 lpi / 1800 dpi: "113.842"
*ColorSepScreenFreq ProcessYellow.127lpi.1800dpi/127 lpi / 1800 dpi: "120.0"
*% For 106 lpi / 1800 dpi ===============================
*ColorSepScreenAngle ProcessBlack.106lpi.1800dpi/106 lpi / 1800 dpi: "45.0"
*ColorSepScreenAngle CustomColor.106lpi.1800dpi/106 lpi / 1800 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.106lpi.1800dpi/106 lpi / 1800 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.106lpi.1800dpi/106 lpi / 1800 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.106lpi.1800dpi/106 lpi / 1800 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.106lpi.1800dpi/106 lpi / 1800 dpi: "106.066"
*ColorSepScreenFreq CustomColor.106lpi.1800dpi/106 lpi / 1800 dpi: "106.066"
*ColorSepScreenFreq ProcessCyan.106lpi.1800dpi/106 lpi / 1800 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.106lpi.1800dpi/106 lpi / 1800 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.106lpi.1800dpi/106 lpi / 1800 dpi: "100.0"
*% For 91 lpi / 1800 dpi ===============================
*ColorSepScreenAngle ProcessBlack.91lpi.1800dpi/91 lpi / 1800 dpi: "45.0"
*ColorSepScreenAngle CustomColor.91lpi.1800dpi/91 lpi / 1800 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.91lpi.1800dpi/91 lpi / 1800 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.91lpi.1800dpi/91 lpi / 1800 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.91lpi.1800dpi/91 lpi / 1800 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.91lpi.1800dpi/91 lpi / 1800 dpi: "90.9137"
*ColorSepScreenFreq CustomColor.91lpi.1800dpi/91 lpi / 1800 dpi: "90.9137"
*ColorSepScreenFreq ProcessCyan.91lpi.1800dpi/91 lpi / 1800 dpi: "81.3157"
*ColorSepScreenFreq ProcessMagenta.91lpi.1800dpi/91 lpi / 1800 dpi: "81.3157"
*ColorSepScreenFreq ProcessYellow.91lpi.1800dpi/91 lpi / 1800 dpi: "85.7143"
*% For 106 lpi / 900 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.106lpi.900dpi/106 lpi / 900 dpi: "45.0"
*ColorSepScreenAngle CustomColor.106lpi.900dpi/106 lpi / 900 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.106lpi.900dpi/106 lpi / 900 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.106lpi.900dpi/106 lpi / 900 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.106lpi.900dpi/106 lpi / 900 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.106lpi.900dpi/106 lpi / 900 dpi: "106.066"
*ColorSepScreenFreq CustomColor.106lpi.900dpi/106 lpi / 900 dpi: "106.066"
*ColorSepScreenFreq ProcessCyan.106lpi.900dpi/106 lpi / 900 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.106lpi.900dpi/106 lpi / 900 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.106lpi.900dpi/106 lpi / 900 dpi: "100.0"
*% For 80 lpi / 900 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.80lpi.900dpi/80 lpi / 900 dpi: "45.0"
*ColorSepScreenAngle CustomColor.80lpi.900dpi/80 lpi / 900 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.80lpi.900dpi/80 lpi / 900 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.80lpi.900dpi/80 lpi / 900 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.80lpi.900dpi/80 lpi / 900 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.80lpi.900dpi/80 lpi / 900 dpi: "79.5495"
*ColorSepScreenFreq CustomColor.80lpi.900dpi/80 lpi / 900 dpi: "79.5495"
*ColorSepScreenFreq ProcessCyan.80lpi.900dpi/80 lpi / 900 dpi: "71.1512"
*ColorSepScreenFreq ProcessMagenta.80lpi.900dpi/80 lpi / 900 dpi: "71.1512"
*ColorSepScreenFreq ProcessYellow.80lpi.900dpi/80 lpi / 900 dpi: "75.0"
*% For 64 lpi / 900 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.64lpi.900dpi/64 lpi / 900 dpi: "45.0"
*ColorSepScreenAngle CustomColor.64lpi.900dpi/64 lpi / 900 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.64lpi.900dpi/64 lpi / 900 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.64lpi.900dpi/64 lpi / 900 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.64lpi.900dpi/64 lpi / 900 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.64lpi.900dpi/64 lpi / 900 dpi: "63.6396"
*ColorSepScreenFreq CustomColor.64lpi.900dpi/64 lpi / 900 dpi: "63.6396"
*ColorSepScreenFreq ProcessCyan.64lpi.900dpi/64 lpi / 900 dpi: "56.921"
*ColorSepScreenFreq ProcessMagenta.64lpi.900dpi/64 lpi / 900 dpi: "56.921"
*ColorSepScreenFreq ProcessYellow.64lpi.900dpi/64 lpi / 900 dpi: "60.0"
*% For "4200B-P" version 49.3 AND 52.2
*% Produced by "BuildPPD.ps" version 3.0 edit 58
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 016636 or 017102
*% depending on the filesystem it resides in.
*% end of PPD file for Varityper 4200B-P