home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OpenStep 4.2
/
Openstep-4.2-Intel-User.iso
/
NextLibrary
/
PrinterTypes
/
English.lproj
/
TI_microLaser_PS35.ppd
< prev
next >
Wrap
PostScript Printer Description
|
1997-03-29
|
15KB
|
451 lines
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.2"
*PCFileName: "TIm35521.PPD"
*LanguageVersion: English
*Product: "(LaserPrinter)"
*PSVersion: "(52.1) 0"
*ModelName: "TI microLaser PS35"
*NickName: "TI microLaser PS35 v.52.1"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
*OpenUI *Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1
*OpenUI *Option2/Optional Envelope Feeder: Boolean
*DefaultOption2: False
*Option2 True/Installed: ""
*Option2 False/Not Installed: ""
*CloseUI: *Option2
*OpenUI *Option3/Memory Configuration: PickOne
*DefaultOption3: None
*Option3 None/Standard 1 MB RAM: ""
*Option3 2Meg/2 MB Upgrade: ""
*Option3 3Meg/3 MB Upgrade: ""
*Option3 4Meg/4 MB Upgrade: ""
*CloseUI: *Option3
*CloseGroup: InstallableOptions
*UIConstraints: *Option1 False *InputSlot Lower
*UIConstraints: *Option2 False *InputSlot Envelope
*UIConstraints: *Option3 None *PageSize Legal
*UIConstraints: *Option3 None *PageRegion Legal
*% General Information and Defaults ===============
*FreeVM: "133530"
*LanguageLevel: "1"
*Extensions: FileSystem
*Protocols: BCP
*Emulators: hplj
*StartEmulator_hplj: "currentfile /hpcl statusdict /emulate get exec "
*StopEmulator_hplj: "<1B7F>0"
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: False
*FileSystem: True
*Throughput: "6"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
"
*End
*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Executive: "statusdict /executivetray get exec"
*PageSize A4: "statusdict /a4tray get exec"
*PageSize B5: "statusdict /b5tray get exec"
*PageSize Monarch/Monarch Envelope: "statusdict /3.875x7.5envelopetray get exec"
*PageSize Comm10/Comm #10 Envelope: "statusdict /4.125x9.5envelopetray get exec"
*PageSize DL/DL Envelope: "statusdict /110x220envelopetray get exec"
*PageSize C5/C5 Envelope: "statusdict /162x229envelopetray get exec"
*?PageSize: "
save
10 dict
dup /letter (Letter) put
dup /legal (Legal) put
dup /a4 (A4) put
dup /b5 (B5) put
dup /executivepage (Executive) put
dup /statement (Statement) put
dup /3.875x7.5envelope (Monarch) put
dup /4.125x9.5envelope (Comm10) put
dup /110x220envelope (DL) put
dup /162x229envelope (C5) put
statusdict /papersize get exec
3 1 roll {get} stopped {(Unknown)}if
exch not { print (.Transverse) }if
= flush
restore
"
*End
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letter"
*PageRegion Legal: "legal"
*PageRegion Statement: "statement"
*PageRegion Executive: "executivepage"
*PageRegion A4: "a4"
*PageRegion B5: "b5"
*PageRegion Monarch/Monarch Envelope: "3.875x7.5envelope"
*PageRegion Comm10/Comm #10 Envelope: "4.125x9.5envelope"
*PageRegion DL/DL Envelope: "110x220envelope"
*PageRegion C5/C5 Envelope: "162x229envelope"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "13 12 596 774 "
*ImageableArea Legal: "15 13 597 991 "
*ImageableArea A4: "16 14 583 823 "
*ImageableArea B5: "15 14 501 709 "
*ImageableArea Statement: "14 14 381 597 "
*ImageableArea Executive: "16 14 510 738 "
*ImageableArea Monarch/Monarch Envelope: "16 20 276 533 "
*ImageableArea Comm10/Comm #10 Envelope: "17 21 292 672"
*ImageableArea DL/DL Envelope: "12 17 302 611"
*ImageableArea C5/C5 Envelope: "13 17 449 628"
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension A4: "595 842"
*PaperDimension B5: "516 729"
*PaperDimension Statement: "396 612"
*PaperDimension Executive: "522 756"
*PaperDimension Monarch/Monarch Envelope: "279 540"
*PaperDimension Comm10/Comm #10 Envelope: "297 684"
*PaperDimension DL/DL Envelope: "312 624"
*PaperDimension C5/C5 Envelope: "459 649"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*InputSlot Envelope: "2 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) (Envelope) ] statusdict /papertray get exec
{get exec} stopped { pop pop (Unknown)} if = flush
restore
"
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *ManualFeed
*DefaultOutputBin: Upper
*DefaultOutputOrder: Normal
*PageStackOrder Upper: Normal
*PageStackOrder Rear: Reverse
*OpenUI *TraySwitch: Boolean
*OrderDependency: 50 AnySetup *TraySwitch
*DefaultTraySwitch: False
*TraySwitch True: "statusdict /trayswitch true put"
*TraySwitch False: "statusdict /trayswitch false put"
*?TraySwitch: "
save
statusdict /trayswitch get {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *TraySwitch
*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
*Font Bookman-Demi: Standard "(001.001)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM
*Font Bookman-Light: Standard "(001.001)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.001)" Standard ROM
*Font Courier: Standard "(002.002)" Standard ROM
*Font Courier-Bold: Standard "(002.002)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.002)" Standard ROM
*Font Courier-Oblique: Standard "(002.002)" Standard ROM
*Font Helvetica: Standard "(001.002)" Standard ROM
*Font Helvetica-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.002)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.004)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.003)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.004)" Standard ROM
*Font Palatino-Bold: Standard "(001.002)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.002)" Standard ROM
*Font Palatino-Italic: Standard "(001.002)" Standard ROM
*Font Palatino-Roman: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.003)" Special ROM
*Font Times-Bold: Standard "(001.002)" Standard ROM
*Font Times-BoldItalic: Standard "(001.004)" Standard ROM
*Font Times-Italic: Standard "(001.002)" Standard ROM
*Font Times-Roman: Standard "(001.002)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.003)" Standard ROM
*Font ZapfDingbats: Special "(001.002)" Special ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
{
count 1 gt
{
exch dup str 6 94 getinterval cvs
(/) print dup print (:) print exch
FontDirectory exch known
{ pop (Yes) }
{
length 6 add str 0 3 -1 roll getinterval
mark exch status
{cleartomark (Yes)}{cleartomark (No)} ifelse
} ifelse =
}
{exit} ifelse
}bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory { pop == } bind forall flush
/filenameforall where
{
pop (fonts/*)
{ dup length 6 sub 6 exch getinterval cvn == } bind
128 string filenameforall flush
} if
(*) = flush
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "printing test"
*Status: "initializing"
*Status: "PrinterError: Optical Sys Err "
*Status: "PrinterError: Main Motor Err "
*Status: "PrinterError: Plgn Motor Err "
*Status: "PrinterError: Heater HI Temp "
*Status: "PrinterError: Heater LO Temp "
*Status: "PrinterError: Thermistor Open "
*Status: "PrinterError: PCUROM Error "
*Status: "PrinterError: PCURAM Error "
*Status: "PrinterError: NV-RAM Error "
*Status: "PrinterError: Eng Serial Error"
*Status: "PrinterError: Cover Open "
*Status: "PrinterError: OPC Life Over "
*Status: "PrinterError: Dvlp. Life Over "
*Status: "PrinterError: Prntr. Life Over"
*Status: "PrinterError: Clear Paper Jam "
*Status: "PrinterError: Add Toner "
*Status: "PrinterError: Waste Toner Full"
*Status: "PrinterError: Paper Out "
*Status: "PrinterError: Insert Manual Pg"
*Status: "PrinterError: Warming Up "
*Status: "PrinterError: Prnter not Ready"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "Optical Sys Err "
*PrinterError: " Main Motor Err "
*PrinterError: " Plgn Motor Err "
*PrinterError: " Heater HI Temp "
*PrinterError: " Heater LO Temp "
*PrinterError: "Thermistor Open "
*PrinterError: " PCUROM Error "
*PrinterError: " PCURAM Error "
*PrinterError: " NV-RAM Error "
*PrinterError: "Eng Serial Error"
*PrinterError: " Cover Open "
*PrinterError: " OPC Life Over "
*PrinterError: "Dvlp. Life Over "
*PrinterError: "Prntr. Life Over"
*PrinterError: "Clear Paper Jam "
*PrinterError: " Add Toner "
*PrinterError: "Waste Toner Full"
*PrinterError: " Paper Out "
*PrinterError: "Insert Manual Pg"
*PrinterError: " Warming Up "
*PrinterError: "Prnter not Ready"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "LaserPrinter" version 52.1
*% Produced by "BuildPPD.ps" version 3.0 edit 58
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 015145 or 015595
*% depending on the filesystem it resides in.
*% end of PPD file for LaserPrinter