home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OpenStep 4.2
/
Openstep-4.2-Intel-User.iso
/
NextLibrary
/
PrinterTypes
/
English.lproj
/
EPSON_PostScript_CARD.ppd
< prev
next >
Wrap
PostScript Printer Description
|
1997-03-29
|
12KB
|
360 lines
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "2.1"
*PCFileName: "EP826051.PPD"
*LanguageVersion: English
*Product: "(EPSON PostScript CARD)"
*PSVersion: "(52.5) 0"
*ModelName: "EPSON PostScript CARD"
*NickName: "EPSON PostScript CARD v52.5"
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: False
*FileSystem: False
*LanguageLevel: "1"
*Throughput: "6"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
"
*End
*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "-1 statusdict /setpapertray get exec letter"
*PageSize Legal: "-1 statusdict /setpapertray get exec legal"
*PageSize Executive: "-1 statusdict /setpapertray get exec executivepage"
*PageSize A4: "-1 statusdict /setpapertray get exec a4"
*PageSize A5: "-1 statusdict /setpapertray get exec a5"
*PageSize B5: "-1 statusdict /setpapertray get exec b5"
*PageSize Statement: "-1 statusdict /setpapertray get exec halfletter"
*PageSize GLT/Government Letter: "-1 statusdict /setpapertray get exec glt"
*PageSize GLG/Government Legal: "-1 statusdict /setpapertray get exec glg"
*PageSize F4: "-1 statusdict /setpapertray get exec f4"
*PageSize LetterSmall: "-1 statusdict /setpapertray get exec lettersmall"
*PageSize LegalSmall: "-1 statusdict /setpapertray get exec legalsmall"
*PageSize A4Small: "-1 statusdict /setpapertray get exec a4small"
*?PageSize: "
save
13 dict
dup /letter (Letter) put
dup /legal (Legal) put
dup /a4 (A4) put
dup /a5 (A5) put
dup /b5 (B5) put
dup /executivepage (Executive) put
dup /halfletter (Statement) put
dup /glt (GLT) put
dup /glg (GLG) put
dup /f4 (F4) put
dup /lettersmall (LetterSmall) put
dup /legalsmall (LegalSmall) put
dup /a4 (A4Small) put
statusdict /papersize get exec
3 1 roll {get} stopped {(Unknown)}if
exch not { print (.Transverse) }if
= flush
restore
"
*End
*CloseUI: *PageSize
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letter"
*PageRegion Legal: "legal"
*PageRegion Executive: "executivepage"
*PageRegion A4: "a4"
*PageRegion A5: "a5"
*PageRegion B5: "b5"
*PageRegion Statement: "halfletter"
*PageRegion GLT/Government Letter: "glt"
*PageRegion GLG/Government Legal: "glg"
*PageRegion F4: "f4"
*PageRegion LetterSmall: "lettersmall"
*PageRegion LegalSmall: "legalsmall"
*PageRegion A4Small: "a4small"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter: "12 12 599 779 "
*ImageableArea Legal: "12 12 599 995 "
*ImageableArea Executive: "12 12 507 743 "
*ImageableArea A4: "12 12 580 829 "
*ImageableArea A5: "12 12 407 582 "
*ImageableArea B5: "12 12 503 716 "
*ImageableArea Statement: "12 12 380 599 "
*ImageableArea GLT/Government Letter: "12 12 560 743 "
*ImageableArea GLG/Government Legal: "12 12 599 923 "
*ImageableArea F4: "12 12 580 923 "
*ImageableArea LetterSmall: "12 49 564 779 "
*ImageableArea LegalSmall: "12 72 495 995 "
*ImageableArea A4Small: "12 49 549 829 "
*?ImageableArea: "
save
/cvp { ( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
"
*End
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Executive: "522 756"
*PaperDimension A4: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B5: "516 729"
*PaperDimension Statement: "396 612"
*PaperDimension GLT/Government Letter: "576 756"
*PaperDimension GLG/Government Legal: "612 936"
*PaperDimension F4: "595 935"
*PaperDimension LetterSmall: "612 792"
*PaperDimension LegalSmall: "612 1008"
*PaperDimension A4Small: "595 842"
*DefaultOutputBin: Upper
*DefaultOutputOrder: Normal
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*InputSlot Auto: "-1 statusdict /setpapertray get exec"
*?InputSlot: "
save
3 dict
dup /0 (Upper) put
dup /1 (Lower) put
dup /-1 (Auto) put
statusdict /papertray get exec
{( ) cvs cvn load exec} stopped {(Unknown)}if
= flush
restore
"
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get
{(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *ManualFeed
*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.002)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.003)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.003)" Standard ROM
*Font Bookman-Demi: Standard "(001.003)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.003)" Standard ROM
*Font Bookman-Light: Standard "(001.003)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.003)" Standard ROM
*Font Courier: Standard "(002.003)" Standard ROM
*Font Courier-Bold: Standard "(002.003)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.003)" Standard ROM
*Font Courier-Oblique: Standard "(002.003)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.008)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.006)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.005)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.006)" Standard ROM
*Font Palatino-Bold: Standard "(001.005)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005)" Standard ROM
*Font Palatino-Italic: Standard "(001.005)" Standard ROM
*Font Palatino-Roman: Standard "(001.005)" Standard ROM
*Font Symbol: Special "(001.007)" Special ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.006)" Standard ROM
*Font ZapfDingbats: Special "(001.004)" Special ROM
*?FontQuery: "
save
{
count 1 gt {
exch dup 128 string cvs (/) print print (:) print
dup FontDirectory exch known {pop (Yes)}
{
(fonts/ )
dup 3 -1 roll 128 string cvs dup length /len exch def
6 exch putinterval
0 len 6 add getinterval mark exch
{ } 128 string filenameforall counttomark 0 gt {
cleartomark (Yes)}{cleartomark (No)}ifelse
}ifelse =
}{ exit } ifelse
} bind loop
(*) = flush
restore
"
*End
*?FontList: "
save
FontDirectory { pop == } bind forall flush
(*) = flush
restore
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "initializing"
*Status: "printing"
*Status: "printing test page"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial25"
*Source: "Centronics"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*% For 60 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "EPSON PostScript CARD" version 52.5
*% Produced by "BuildPPD.ps" version 3.0 edit 58
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 012198 or 012557
*% depending on the filesystem it resides in.
*% end of PPD file for EPSON PostScript CARD